Context:
The CID draft does not require that the length of CIDs used for incoming
records must not change in the course of a connection. Since the record
header does not contain a length field for the CID, this means that if
CIDs of varying lengths are used, the CID length must be inferred from
other aspects of the record header (such as the epoch) and/or by means
outside of the protocol, e.g. by coding its length in the CID itself.
Inferring the CID length from the record's epoch is theoretically possible
in DTLS 1.2, but it requires the information about the epoch to be present
even if the epoch is no longer used: That's because one should silently drop
records from old epochs, but not the entire datagrams to which they belong
(there might be entire flights in a single datagram, including a change of
epoch); however, in order to do so, one needs to parse the record's content
length, the position of which is only known once the CID length for the epoch
is known. In conclusion, it puts a significant burden on the implementation
to infer the CID length from the record epoch, which moreover mangles record
processing with the high-level logic of the protocol (determining which epochs
are in use in which flights, when they are changed, etc. -- this would normally
determine when we drop epochs).
Moreover, with DTLS 1.3, CIDs are no longer uniquely associated to epochs,
but every epoch may use a set of CIDs of varying lengths -- in that case,
it's even theoretically impossible to do record header parsing based on
the epoch configuration only.
We must therefore seek a way for standalone record header parsing, which
means that we must either (a) fix the CID lengths for incoming records,
or (b) allow the application-code to configure a callback to implement
an application-specific CID parsing which would somehow infer the length
of the CID from the CID itself.
Supporting multiple lengths for incoming CIDs significantly increases
complexity while, on the other hand, the restriction to a fixed CID length
for incoming CIDs (which the application controls - in contrast to the
lengths of the CIDs used when writing messages to the peer) doesn't
appear to severely limit the usefulness of the CID extension.
Therefore, the initial implementation of the CID feature will require
a fixed length for incoming CIDs, which is what this commit enforces,
in the following way:
In order to avoid a change of API in case support for variable lengths
CIDs shall be added at some point, we keep mbedtls_ssl_set_cid(), which
includes a CID length parameter, but add a new API mbedtls_ssl_conf_cid_len()
which applies to an SSL configuration, and which fixes the CID length that
any call to mbetls_ssl_set_cid() which applies to an SSL context that is bound
to the given SSL configuration must use.
While this creates a slight redundancy of parameters, it allows to
potentially add an API like mbedtls_ssl_conf_cid_len_cb() later which
could allow users to register a callback which dynamically infers the
length of a CID at record header parsing time, without changing the
rest of the API.
The function mbedtls_ssl_hdr_len() returns the length of the record
header (so far: always 13 Bytes for DTLS, and always 5 Bytes for TLS).
With the introduction of the CID extension, the lengths of record
headers depends on whether the records are incoming or outgoing,
and also on the current transform.
Preparing for this, this commit splits mbedtls_ssl_hdr_len() in two
-- so far unmodified -- functions mbedtls_ssl_in_hdr_len() and
mbedtls_ssl_out_hdr_len() and replaces the uses of mbedtls_ssl_hdr_len()
according to whether they are about incoming or outgoing records.
There is no need to change the signature of mbedtls_ssl_{in/out}_hdr_len()
in preparation for its dependency on the currently active transform,
since the SSL context is passed as an argument, and the currently
active transform is referenced from that.
With the introduction of the CID feature, the stack needs to be able
to handle a change of record content type during record protection,
which in particular means that the record content type check will
need to move or be duplicated.
This commit introduces a tiny static helper function which checks
the validity of record content types, which hopefully makes it
easier to subsequently move or duplicate this check.
With the introduction of the CID extension, the record content type
may change during decryption; we must therefore re-consider every
record content type check that happens before decryption, and either
move or duplicate it to ensure it also applies to records whose
real content type is only revealed during decryption.
This commit does this for the silent dropping of unexpected
ApplicationData records in DTLS. Previously, this was caught
in ssl_parse_record_header(), returning
MBEDTLS_ERR_SSL_UNEXPECTED_RECORD which in ssl_get_next_record()
would lead to silent skipping of the record.
When using CID, this check wouldn't trigger e.g. when delayed
encrypted ApplicationData records come on a CID-based connection
during a renegotiation.
This commit moves the check to mbedtls_ssl_handle_message_type()
and returns MBEDTLS_ERR_SSL_NON_FATAL if it triggers, which leads
so silent skipover in the caller mbedtls_ssl_read_record().
The SSL context structure mbedtls_ssl_context contains several pointers
ssl->in_hdr, ssl->in_len, ssl->in_iv, ssl->in_msg pointing to various
parts of the record header in an incoming record, and they are setup
in the static function ssl_update_in_pointers() based on the _expected_
transform for the next incoming record.
In particular, the pointer ssl->in_msg is set to where the record plaintext
should reside after record decryption, and an assertion double-checks this
after each call to ssl_decrypt_buf().
This commit removes the dependency of ssl_update_in_pointers() on the
expected incoming transform by setting ssl->in_msg to ssl->in_iv --
the beginning of the record content (potentially including the IV) --
and adjusting ssl->in_msg after calling ssl_decrypt_buf() on a protected
record.
Care has to be taken to not load ssl->in_msg before calling
mbedtls_ssl_read_record(), then, which was previously the
case in ssl_parse_server_hello(); the commit fixes that.
If a record exhibits an invalid feature only after successful
authenticated decryption, this is a protocol violation by the
peer and should hence lead to connection failure. The previous
code, however, would silently ignore such records. This commit
fixes this.
So far, the only case to which this applies is the non-acceptance
of empty non-AD records in TLS 1.2. With the present commit, such
records lead to connection failure, while previously, they were
silently ignored.
With the introduction of the Connection ID extension (or TLS 1.3),
this will also apply to records whose real content type -- which
is only revealed during authenticated decryption -- is invalid.
In contrast to other aspects of the Connection ID extension,
the CID-based additional data for MAC computations differs from
the non-CID case even if the CID length is 0, because it
includes the CID length.
Quoting the CID draft 04:
- Block Ciphers:
MAC(MAC_write_key, seq_num +
tls12_cid + // New input
DTLSPlaintext.version +
cid + // New input
cid_length + // New input
length_of_DTLSInnerPlaintext + // New input
DTLSInnerPlaintext.content + // New input
DTLSInnerPlaintext.real_type + // New input
DTLSInnerPlaintext.zeros // New input
)
And similar for AEAD and Encrypt-then-MAC.
This commit temporarily comments the copying of the negotiated CIDs
into the established ::mbedtls_ssl_transform in mbedtls_ssl_derive_keys()
until the CID feature has been fully implemented.
While mbedtls_ssl_decrypt_buf() and mbedtls_ssl_encrypt_buf() do
support CID-based record protection by now and can be unit tested,
the following two changes in the rest of the stack are still missing
before CID-based record protection can be integrated:
- Parsing of CIDs in incoming records.
- Allowing the new CID record content type for incoming records.
- Dealing with a change of record content type during record
decryption.
Further, since mbedtls_ssl_get_peer_cid() judges the use of CIDs by
the CID fields in the currently transforms, this change also requires
temporarily disabling some grepping for ssl_client2 / ssl_server2
debug output in ssl-opt.sh.
This commit modifies ssl_decrypt_buf() and ssl_encrypt_buf()
to include the CID into authentication data during record
protection.
It does not yet implement the new DTLSInnerPlaintext format
from https://tools.ietf.org/html/draft-ietf-tls-dtls-connection-id-04
The guard for the definition of the function was different from the guard on
its only use - make it the same.
This has been caught by tests/scripts/key-exchanges.pl. It had not been caught
by this script in earlier CI runs, because previously USE_PSA_CRYPTO was
disabled in the builds used by this script; enabling it uncovered the issue.
Add an additional function `mbedtls_ssl_export_keys_ext_t()`
for exporting key, that adds additional information such as
the used `tls_prf` and the random bytes.
This commit adds tests exercising mutually inverse pairs of
record encryption and decryption transformations for the various
transformation types allowed in TLS: Stream, CBC, and AEAD.
The hash contexts `ssl_transform->md_ctx_{enc/dec}` are not used if
only AEAD ciphersuites are enabled. This commit removes them from the
`ssl_transform` struct in this case, saving a few bytes.
This commit guards code specific to AEAD, CBC and stream cipher modes
in `ssl_derive_keys` by the respective configuration flags, analogous
to the guards that are already in place in the record decryption and
encryption functions `ssl_decrypt_buf` resp. `ssl_decrypt_buf`.
Analogous to the previous commit, but concerning the record decryption
routine `ssl_decrypt_buf`.
An important change regards the checking of CBC padding:
Prior to this commit, the CBC padding check always read 256 bytes at
the end of the internal record buffer, almost always going past the
boundaries of the record under consideration. In order to stay within
the bounds of the given record, this commit changes this behavior by
always reading the last min(256, plaintext_len) bytes of the record
plaintext buffer and taking into consideration the last `padlen` of
these for the padding check. With this change, the memory access
pattern and runtime of the padding check is entirely determined by
the size of the encrypted record, in particular not giving away
any information on the validity of the padding.
The following depicts the different behaviors:
1) Previous CBC padding check
1.a) Claimed padding length <= plaintext length
+----------------------------------------+----+
| Record plaintext buffer | | PL |
+----------------------------------------+----+
\__ PL __/
+------------------------------------...
| read for padding check ...
+------------------------------------...
|
contents discarded
from here
1.b) Claimed padding length > plaintext length
+----------------------------------------+----+
| Record plaintext buffer | PL |
+----------------------------------------+----+
+-------------------------...
| read for padding check ...
+-------------------------...
|
contents discarded
from here
2) New CBC padding check
+----------------------------------------+----+
| Record plaintext buffer | | PL |
+----------------------------------------+----+
\__ PL __/
+---------------------------------------+
| read for padding check |
+---------------------------------------+
|
contents discarded
until here
The previous version of the record encryption function
`ssl_encrypt_buf` takes the entire SSL context as an argument,
while intuitively, it should only depend on the current security
parameters and the record buffer.
Analyzing the exact dependencies, it turned out that in addition
to the currently active `ssl_transform` instance and the record
information, the encryption function needs access to
- the negotiated protocol version, and
- the status of the encrypt-then-MAC extension.
This commit moves these two fields into `ssl_transform` and
changes the signature of `ssl_encrypt_buf` to only use an instance
of `ssl_transform` and an instance of the new `ssl_record` type.
The `ssl_context` instance is *solely* kept for the debugging macros
which need an SSL context instance.
The benefit of the change is twofold:
1) It avoids the need of the MPS to deal with instances of
`ssl_context`. The MPS should only work with records and
opaque security parameters, which is what the change in
this commit makes progress towards.
2) It significantly eases testing of the encryption function:
independent of any SSL context, the encryption function can
be passed some record buffer to encrypt alongside some arbitrary
choice of parameters, and e.g. be checked to not overflow the
provided memory.
The macro constant `MBEDTLS_SSL_MAC_ADD` defined in `ssl_internal.h`
defines an upper bound for the amount of space needed for the record
authentication tag. Its definition distinguishes between the
presence of an ARC4 or CBC ciphersuite suite, in which case the maximum
size of an enabled SHA digest is used; otherwise, `MBEDTLS_SSL_MAC_ADD`
is set to 16 to accomodate AEAD authentication tags.
This assignment has a flaw in the situation where confidentiality is
not needed and the NULL cipher is in use. In this case, the
authentication tag also uses a SHA digest, but the definition of
`MBEDTLS_SSL_MAC_ADD` doesn't guarantee enough space.
The present commit fixes this by distinguishing between the presence
of *some* ciphersuite using a MAC, including those using a NULL cipher.
For that, the previously internal macro `SSL_SOME_MODES_USE_MAC` from
`ssl_tls.c` is renamed and moved to the public macro
`MBEDTLS_SOME_MODES_USE_MAC` defined in `ssl_internal.h`.
Prior to this commit, the security parameter struct `ssl_transform`
contained a `ciphersuite_info` field pointing to the information
structure for the negotiated ciphersuite. However, the only
information extracted from that structure that was used in the core
encryption and decryption functions `ssl_encrypt_buf`/`ssl_decrypt_buf`
was the authentication tag length in case of an AEAD cipher.
The present commit removes the `ciphersuite_info` field from the
`ssl_transform` structure and adds an explicit `taglen` field
for AEAD authentication tag length.
This is in accordance with the principle that the `ssl_transform`
structure should contain the raw parameters needed for the record
encryption and decryption functions to work, but not the higher-level
information that gave rise to them. For example, the `ssl_transform`
structure implicitly contains the encryption/decryption keys within
their cipher contexts, but it doesn't contain the SSL master or
premaster secrets. Likewise, it contains an explicit `maclen`, while
the status of the 'Truncated HMAC' extension -- which determines the
value of `maclen` when the `ssl_transform` structure is created in
`ssl_derive_keys` -- is not contained in `ssl_transform`.
The `ciphersuite_info` pointer was used in other places outside
the encryption/decryption functions during the handshake, and for
these functions to work, this commit adds a `ciphersuite_info` pointer
field to the handshake-local `ssl_handshake_params` structure.
The `ssl_transform` security parameter structure contains opaque
cipher contexts for use by the record encryption/decryption functions
`ssl_decrypt_buf`/`ssl_encrypt_buf`, while the underlying key material
is configured once in `ssl_derive_keys` and is not explicitly dealt with
anymore afterwards. In particular, the key length is not needed
explicitly by the encryption/decryption functions but is nonetheless
stored in an explicit yet superfluous `keylen` field in `ssl_transform`.
This commit removes this field.
Resolve conflicts by performing the following:
- Ensure calls to mbedtls_x509_crt_verify_* are made with callbacks
* origin/pr/2539:
Make CRT callback tests more robust
Rename constant in client2.c
Fix typo
Add test for configuration specific CRT callback
Fix doxygen documentation of mbedtls_ssl_set_verify()
Add test exercising context-specific CRT callback to ssl-opt.sh
Add cmd to use context-specific CRT callback in ssl_client2
Implement context-specific verification callbacks
Add context-specific CRT verification callbacks
Improve documentation of mbedtls_ssl_conf_verify()
If we don't need to store the peer's CRT chain permanently, we may
free it immediately after verifying it. Moreover, since we parse the
CRT chain in-place from the input buffer in this case, pointers from
the CRT structure remain valid after freeing the structure, and we
use that to extract the digest and pubkey from the CRT after freeing
the structure.
It is used in `mbedtls_ssl_session_free()` under
`MBEDTLS_X509_CRT_PARSE_C`, but defined only if
`MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED`.
Issue #2422 tracks the use of
`MBEDTLS_KEY_EXCHANGE__WITH_CERT_ENABLED` instead of
`MBEDTLS_X509_CRT_PARSE_C` for code and fields
related to CRT-based ciphersuites.
This commit modifies `mbedtls_ssl_parse_certificate()` to store a
copy of the peer's public key after parsing and verifying the peer's
CRT chain.
So far, this leads to heavy memory duplication: We have the CRT chain
in the I/O buffer, then parse (and, thereby, copy) it to a
`mbedtls_x509_crt` structure, and then make another copy of the
peer's public key, plus the overhead from the MPI and ECP structures.
This inefficiency will soon go away to a significant extend, because:
- Another PR adds functionality to parse CRTs without taking
ownership of the input buffers. Applying this here will allow
parsing and verifying the peer's chain without making an additional
raw copy. The overhead reduces to the size of `mbedtls_x509_crt`,
the public key, and the DN structures referenced in the CRT.
- Once copyless parsing is in place and the removal of the peer CRT
is fully implemented, we can extract the public key bounds from
the parsed certificate and then free the entire chain before
parsing the public key again. This means that we never store
the parsed public key twice at the same time.
When removing the (session-local) copy of the peer's CRT chain, we must
keep a handshake-local copy of the peer's public key, as (naturally) every
key exchange will make use of that public key at some point to verify that
the peer actually owns the corresponding private key (e.g., verify signatures
from ServerKeyExchange or CertificateVerify, or encrypt a PMS in a RSA-based
exchange, or extract static (EC)DH parameters).
This commit adds a PK context field `peer_pubkey` to the handshake parameter
structure `mbedtls_handshake_params_init()` and adapts the init and free
functions accordingly. It does not yet make actual use of the new field.
`mbedtls_ssl_parse_certificate()` parses the peer's certificate chain
directly into the `peer_cert` field of the `mbedtls_ssl_session`
structure being established. To allow to optionally remove this field
from the session structure, this commit changes this to parse the peer's
chain into a local variable instead first, which can then either be freed
after CRT verification - in case the chain should not be stored - or
mapped to the `peer_cert` if it should be kept. For now, only the latter
is implemented.
A subsequent commit will need this function in the session ticket
and session cache implementations. As the latter are server-side,
this commit also removes the MBEDTLS_SSL_CLI_C guard.
For now, the function is declared in ssl_internal.h and hence not
part of the public API.
This commit modifies the helper `ssl_parse_certificate_chain()` to
accep any target X.509 CRT chain instead of hardcoding it to
`session_negotiate->peer_cert`. This increases modularity and paves
the way towards removing `mbedtls_ssl_session::peer_cert`.
This commit adds a helper function `ssl_parse_certificate_coordinate()`
which checks whether a `Certificate` message is expected from the peer.
The logic is the following:
- For ciphersuites which don't use server-side CRTs, no Certificate
message is expected (neither for the server, nor the client).
- On the server, no client certificate is expected in the following cases:
* The server server didn't request a Certificate, which is controlled
by the `authmode` setting.
* A RSA-PSK suite is used; this is the only suite using server CRTs
but not allowing client-side authentication.
This commit introduces a static helper function
`mbedtls_ssl_ciphersuite_uses_srv_cert()`
which determines whether a ciphersuite may make use of server-side CRTs.
This function is in turn uses in `mbedtls_ssl_parse_certificate()` to
skip certificate parsing for ciphersuites which don't involve CRTs.
Note: Ciphersuites not using server-side CRTs don't allow client-side CRTs
either, so it is safe to guard `mbedtls_ssl_{parse/write}_certificate()`
this way.
Note: Previously, the code uses a positive check over the suites
- MBEDTLS_KEY_EXCHANGE_PSK
- MBEDTLS_KEY_EXCHANGE_DHE_PSK
- MBEDTLS_KEY_EXCHANGE_ECDHE_PSK
- MBEDTLS_KEY_EXCHANGE_ECJPAKE,
while now, it uses a negative check over `mbedtls_ssl_ciphersuite_uses_srv_cert()`,
which checks for the suites
- MBEDTLS_KEY_EXCHANGE_RSA
- MBEDTLS_KEY_EXCHANGE_RSA_PSK
- MBEDTLS_KEY_EXCHANGE_DHE_RSA
- MBEDTLS_KEY_EXCHANGE_ECDH_RSA
- MBEDTLS_KEY_EXCHANGE_ECDHE_RSA
- MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA
- MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA
This is equivalent since, together, those are all ciphersuites.
Quoting ssl_ciphersuites.h:
```
typedef enum {
MBEDTLS_KEY_EXCHANGE_NONE = 0,
MBEDTLS_KEY_EXCHANGE_RSA,
MBEDTLS_KEY_EXCHANGE_DHE_RSA,
MBEDTLS_KEY_EXCHANGE_ECDHE_RSA,
MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA,
MBEDTLS_KEY_EXCHANGE_PSK,
MBEDTLS_KEY_EXCHANGE_DHE_PSK,
MBEDTLS_KEY_EXCHANGE_RSA_PSK,
MBEDTLS_KEY_EXCHANGE_ECDHE_PSK,
MBEDTLS_KEY_EXCHANGE_ECDH_RSA,
MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA,
MBEDTLS_KEY_EXCHANGE_ECJPAKE,
} mbedtls_key_exchange_type_t;
```
The handler `mbedtls_ssl_parse_certificate()` for incoming `Certificate`
messages contains many branches updating the handshake state. For easier
reasoning about state evolution, this commit introduces a single code-path
updating the state machine at the end of `mbedtls_ssl_parse_certificate()`.
If an attempt for session resumption fails, the `session_negotiate` structure
might be partially filled, and in particular already contain a peer certificate
structure. This certificate structure needs to be freed before parsing the
certificate sent in the `Certificate` message.
This commit moves the code-path taking care of this from the helper
function `ssl_parse_certificate_chain()`, whose purpose should be parsing
only, to the top-level handler `mbedtls_ssl_parse_certificate()`.
The fact that we don't know the state of `ssl->session_negotiate` after
a failed attempt for session resumption is undesirable, and a separate
issue #2414 has been opened to improve on this.
This commit introduces a server-side static helper function
`ssl_srv_check_client_no_crt_notification()`, which checks if
the message we received during the incoming certificate state
notifies the server of the lack of certificate on the client.
For SSLv3, such a notification comes as a specific alert,
while for all other TLS versions, it comes as a `Certificate`
handshake message with an empty CRT list.
So far, we've used the `peer_cert` pointer to detect whether
we're parsing the first CRT, but that will soon be removed
if `MBEDTLS_SSL_KEEP_PEER_CERTIFICATE` is unset.
This commit introduces a helper function `ssl_clear_peer_cert()`
which frees all data related to the peer's certificate from an
`mbedtls_ssl_session` structure. Currently, this is the peer's
certificate itself, while eventually, it'll be its digest only.
After mitigating the 'triple handshake attack' by checking that
the peer's end-CRT didn't change during renegotation, the current
code avoids re-parsing the CRT by moving the CRT-pointer from the
old session to the new one. While efficient, this will no longer
work once only the hash of the peer's CRT is stored beyond the
handshake.
This commit removes the code-path moving the old CRT, and instead
frees the entire peer CRT chain from the initial handshake as soon
as the 'triple handshake attack' protection has completed.
- Populate the ECDH private key slot with a fresh private EC key
designated for the correct algorithm.
- Export the public part of the ECDH private key from PSA and
reformat it to suite the format of the ClientKeyExchange message.
- Perform the PSA-based ECDH key agreement and store the result
as the premaster secret for the connection.
Context: During a handshake, the SSL/TLS handshake logic constructs
an instance of ::mbedtls_ssl_session representing the SSL session
being established. This structure contains information such as the
session's master secret, the peer certificate, or the session ticket
issues by the server (if applicable).
During a renegotiation, the new session is constructed aside the existing
one and destroys and replaces the latter only when the renegotiation is
complete. While conceptually clear, this means that during the renegotiation,
large pieces of information such as the peer's CRT or the session ticket
exist twice in memory, even though the original versions are removed
eventually.
This commit removes the simultaneous presence of two peer CRT chains
in memory during renegotiation, in the following way:
- Unlike in the case of SessionTickets handled in the previous commit,
we cannot simply free the peer's CRT chain from the previous handshake
before parsing the new one, as we need to verify that the peer's end-CRT
hasn't changed to mitigate the 'Triple Handshake Attack'.
- Instead, we perform a binary comparison of the original peer end-CRT
with the one presented during renegotiation, and if it succeeds, we
avoid re-parsing CRT by moving the corresponding CRT pointer from the
old to the new session structure.
- The remaining CRTs in the peer's chain are not affected by the triple
handshake attack protection, and for them we may employ the canonical
approach of freeing them before parsing the remainder of the new chain.
Note that this commit intends to not change any observable behavior
of the stack. In particular:
- The peer's CRT chain is still verified during renegotiation.
- The tail of the peer's CRT chain may change during renegotiation.
Additional changes to temporarily enable running tests:
ssl_srv.c and test_suite_ecdh use mbedtls_ecp_group_load instead of
mbedtls_ecdh_setup
test_suite_ctr_drbg uses mbedtls_ctr_drbg_update instead of
mbedtls_ctr_drbg_update_ret
The SSL module accesses ECDH context members directly. This can't work
with the new context, where we can't make any assumption about the
implementation of the context.
This commit makes use of the new functions to avoid accessing ECDH
members directly. The only members that are still accessed directly are
the group ID and the point format and they are independent from the
implementation.
Reasons:
- For the first release, we attempt to support TLS-1.2 only,
- At least TLS-1.0 is known to not work at the moment, as
for CBC ciphersuites the code in mbedtls_ssl_decrypt_buf()
and mbedtls_ssl_encrypt_buf() assumes that mbedtls_cipher_crypt()
updates the structure field for the IV in the cipher context,
which the PSA-based implementation currently doesn't.
This commit changes the code path in mbedtls_ssl_derive_keys()
responsible for setting up record protection cipher contexts
to attempt to use the new API mbedtls_cipher_setup_psa() in
case MBEDTLS_USE_PSA_CRYPTO is set.
For that, the AEAD tag length must be provided, which is already
computed earlier in mbedtls_ssl_derive_keys() and only needs to be
stored a function scope to be available for mbedtls_cipher_setup_psa().
If mbedtls_cipher_setup_psa() fails cleanly indicating that the
requested cipher is not supported in PSA, we fall through to
the default setup using mbedtls_cipher_setup(). However, we print
a debug message in this case, to allow catching the fallthrough in
tests where we know we're using a cipher which should be supported
by PSA.
The code maintains the invariant that raw and opaque PSKs are never
configured simultaneously, so strictly speaking `ssl_conf_remove_psk()`
need not consider clearing the raw PSK if it has already cleared an
opaque one - and previously, it didn't. However, it doesn't come at
any cost to keep this check as a safe-guard to future unforeseen
situations where opaque and raw PSKs _are_ both present.
In multiple places, it occurrs as the fixed length of
the master secret, so use a constant with a descriptive
name instead. This is reinforced by the fact the some
further occurrences of '48' are semantically different.
ssl_write_handshake_msg() includes the assertion that
`ssl->handshake != NULL` when handling a record which is
(a) a handshake message, and NOT
(b) a HelloRequest.
However, it later calls `ssl_append_flight()` for any
record different from a HelloRequest handshake record,
that is, records satisfying !(a) || !(b), instead of
(a) && !(b) as covered by the assertion (specifically,
CCS or Alert records).
Since `ssl_append_flight()` assumes that `ssl->handshake != NULL`,
this rightfully triggers static analyzer warnings.
This commit expands the scope of the assertion to check
that `ssl->handshake != NULL` for any record which is not
a HelloRequest.
This commit changes the behavior of the record decryption routine
`ssl_decrypt_buf()` in the following situation:
1. A CBC ciphersuite with Encrypt-then-MAC is used.
2. A record with valid MAC but invalid CBC padding is received.
In this situation, the previous code would not raise and error but
instead forward the decrypted packet, including the wrong padding,
to the user.
This commit changes this behavior to return the error
MBEDTLS_ERR_SSL_INVALID_MAC instead.
While erroneous, the previous behavior does not constitute a
security flaw since it can only happen for properly authenticated
records, that is, if the peer makes a mistake while preparing the
padded plaintext.
This commit ensures that buffers holding fragmented or
future handshake messages get zeroized before they are
freed when the respective handshake message is no longer
needed. Previously, the handshake message content would
leak on the heap.
* development-restricted: (578 commits)
Update library version number to 2.13.1
Don't define _POSIX_C_SOURCE in header file
Don't declare and define gmtime()-mutex on Windows platforms
Correct preprocessor guards determining use of gmtime()
Correct documentation of mbedtls_platform_gmtime_r()
Correct typo in documentation of mbedtls_platform_gmtime_r()
Correct POSIX version check to determine presence of gmtime_r()
Improve documentation of mbedtls_platform_gmtime_r()
platform_utils.{c/h} -> platform_util.{c/h}
Don't include platform_time.h if !MBEDTLS_HAVE_TIME
Improve wording of documentation of MBEDTLS_PLATFORM_GMTIME_R_ALT
Fix typo in documentation of MBEDTLS_PLATFORM_GMTIME_R_ALT
Replace 'thread safe' by 'thread-safe' in the documentation
Improve documentation of MBEDTLS_HAVE_TIME_DATE
ChangeLog: Add missing renamings gmtime -> gmtime_r
Improve documentation of MBEDTLS_HAVE_TIME_DATE
Minor documentation improvements
Style: Add missing period in documentation in threading.h
Rename mbedtls_platform_gmtime() to mbedtls_platform_gmtime_r()
Guard decl and use of gmtime mutex by HAVE_TIME_DATE and !GMTIME_ALT
...
By the standard (RFC 6066, Sect. 4), the Maximum Fragment Length (MFL)
extension limits the maximum record payload size, but not the maximum
datagram size. However, not inferring any limitations on the MTU when
setting the MFL means that a party has no means to dynamically inform
the peer about MTU limitations.
This commit changes the function ssl_get_remaining_payload_in_datagram()
to never return more than
MFL - { Total size of all records within the current datagram }
thereby limiting the MTU to MFL + { Maximum Record Expansion }.
The function ssl_free_buffered_record() frees a future epoch record, if
such is present. Previously, it was called in mbedtls_handshake_free(),
i.e. an unused buffered record would be cleared at the end of the handshake.
This commit moves the call to the function ssl_buffering_free() responsible
for freeing all buffering-related data, and which is called not only at
the end of the handshake, but at the end of every flight. In particular,
future record epochs won't be buffered across flight boundaries anymore,
and they shouldn't.
The previous code appended messages to flights only if their handshake type,
as derived from the first byte in the message, was different from
MBEDTLS_SSL_HS_HELLO_REQUEST. This check should only be performed
for handshake records, while CCS records should immediately be appended.
In SSLv3, the client sends a NoCertificate alert in response to
a CertificateRequest if it doesn't have a CRT. This previously
lead to failure in ssl_write_handshake_msg() which only accepted
handshake or CCS records.
The previous code appended messages to flights only if their handshake type,
as derived from the first byte in the message, was different from
MBEDTLS_SSL_HS_HELLO_REQUEST. This check should only be performed
for handshake records, while CCS records should immediately be appended.
In SSLv3, the client sends a NoCertificate alert in response to
a CertificateRequest if it doesn't have a CRT. This previously
lead to failure in ssl_write_handshake_msg() which only accepted
handshake or CCS records.
Previous commits introduced the field `total_bytes_buffered`
which is supposed to keep track of the cumulative size of
all heap allocated buffers used for the purpose of reassembly
and/or buffering of future messages.
However, the buffering of future epoch records were not reflected
in this field so far. This commit changes this, adding the length
of a future epoch record to `total_bytes_buffered` when it's buffered,
and subtracting it when it's freed.
This commit adds a static function ssl_buffer_make_space() which
takes a buffer size as an argument and attempts to free as many
future message bufffers as necessary to ensure that the desired
amount of buffering space is available without violating the
total buffering limit set by MBEDTLS_SSL_DTLS_MAX_BUFFERING.
If the next expected handshake message can't be reassembled because
buffered future messages have already used up too much of the available
space for buffering, free those future message buffers in order to
make space for the reassembly, starting with the handshake message
that's farthest in the future.
This commit adds a static function ssl_buffering_free_slot()
which allows to free a particular structure used to buffer
and/or reassembly some handshake message.
This commit introduces a compile time constant MBEDTLS_SSL_DTLS_MAX_BUFFERING
to mbedtls/config.h which allows the user to control the cumulative size of
all heap buffer allocated for the purpose of reassembling and buffering
handshake messages.
It is put to use by introducing a new field `total_bytes_buffered` to
the buffering substructure of `mbedtls_ssl_handshake_params` that keeps
track of the total size of heap allocated buffers for the purpose of
reassembly and buffering at any time. It is increased whenever a handshake
message is buffered or prepared for reassembly, and decreased when a
buffered or fully reassembled message is copied into the input buffer
and passed to the handshake logic layer.
This commit does not yet include future epoch record buffering into
account; this will be done in a subsequent commit.
Also, it is now conceivable that the reassembly of the next expected
handshake message fails because too much buffering space has already
been used up for future messages. This case currently leads to an
error, but instead, the stack should get rid of buffered messages
to be able to buffer the next one. This will need to be implemented
in one of the next commits.
A previous commit introduced the function ssl_prepare_reassembly_buffer()
which took a message length and a boolean flag indicating if a reassembly
bit map was needed, and attempted to heap-allocate a buffer of sufficient
size to hold both the message, its header, and potentially the reassembly
bitmap.
A subsequent commit is going to introduce a limit on the amount of heap
allocations allowed for the purpose of buffering, and this change will
need to know the reassembly buffer size before attempting the allocation.
To this end, this commit changes ssl_prepare_reassembly_buffer() into
ssl_get_reassembly_buffer_size() which solely computes the reassembly
buffer size, and performing the heap allocation manually in
ssl_buffer_message().
This commit moves the length and content check for CCS messages to
the function mbedtls_ssl_handle_message_type() which is called after
a record has been deprotected.
Previously, these checks were performed in the function
mbedtls_ssl_parse_change_cipher_spec(); however, now that
the arrival of out-of-order CCS messages is remembered
as a boolean flag, the check also has to happen when this
flag is set. Moving the length and content check to
mbedtls_ssl_handle_message_type() allows to treat both
checks uniformly.
Depends on the current transform, which might change when retransmitting a
flight containing a Finished message, so compute it only after the transform
is swapped.
This setting belongs to the individual connection, not to a configuration
shared by many connections. (If a default value is desired, that can be handled
by the application code that calls mbedtls_ssl_set_mtu().)
There are at least two ways in which this matters:
- per-connection settings can be adjusted if MTU estimates become available
during the lifetime of the connection
- it is at least conceivable that a server might recognize restricted clients
based on range of IPs and immediately set a lower MTU for them. This is much
easier to do with a per-connection setting than by maintaining multiple
near-duplicated ssl_config objects that differ only by the MTU setting.
The SSL context is passed to the reassembly preparation function
ssl_prepare_reassembly_buffer() solely for the purpose of allowing
debugging output. This commit marks the context as unused if
debugging is disabled (through !MBEDTLS_DEBUG_C).
This commit implements the buffering of a record from the next epoch.
- The buffering substructure of mbedtls_ssl_handshake_params
gets another field to hold a raw record (incl. header) from
a future epoch.
- If ssl_parse_record_header() sees a record from the next epoch,
it signals that it might be suitable for buffering by returning
MBEDTLS_ERR_SSL_EARLY_MESSAGE.
- If ssl_get_next_record() finds this error code, it passes control
to ssl_buffer_future_record() which may or may not decide to buffer
the record; it does so if
- a handshake is in progress,
- the record is a handshake record
- no record has already been buffered.
If these conditions are met, the record is backed up in the
aforementioned buffering substructure.
- If the current datagram is fully processed, ssl_load_buffered_record()
is called to check if a record has been buffered, and if yes,
if by now the its epoch is the current one; if yes, it copies
the record into the (empty! otherwise, ssl_load_buffered_record()
wouldn't have been called) input buffer.
This commit implements future handshake message buffering
and loading by implementing ssl_load_buffered_message()
and ssl_buffer_message().
Whenever a handshake message is received which is
- a future handshake message (i.e., the sequence number
is larger than the next expected one), or which is
- a proper fragment of the next expected handshake message,
ssl_buffer_message() is called, which does the following:
- Ignore message if its sequence number is too far ahead
of the next expected sequence number, as controlled by
the macro constant MBEDTLS_SSL_MAX_BUFFERED_HS.
- Otherwise, check if buffering for the message with the
respective sequence number has already commenced.
- If not, allocate space to back up the message within
the buffering substructure of mbedtls_ssl_handshake_params.
If the message is a proper fragment, allocate additional
space for a reassembly bitmap; if it is a full message,
omit the bitmap. In any case, fall throuh to the next case.
- If the message has already been buffered, check that
the header is the same, and add the current fragment
if the message is not yet complete (this excludes the
case where a future message has been received in a single
fragment, hence omitting the bitmap, and is afterwards
also received as a series of proper fragments; in this
case, the proper fragments will be ignored).
For loading buffered messages in ssl_load_buffered_message(),
the approach is the following:
- Check the first entry in the buffering window (the window
is always based at the next expected handshake message).
If buffering hasn't started or if reassembly is still
in progress, ignore. If the next expected message has been
fully received, copy it to the input buffer (which is empty,
as ssl_load_buffered_message() is only called in this case).
This commit returns the error code MBEDTLS_ERR_SSL_EARLY_MESSAGE
for proper handshake fragments, forwarding their treatment to
the buffering function ssl_buffer_message(); currently, though,
this function does not yet buffer or reassembly HS messages, so:
! This commit temporarily disables support for handshake reassembly !
This commit introduces helper functions
- ssl_get_hs_frag_len()
- ssl_get_hs_frag_off()
to parse the fragment length resp. fragment offset fields
in the handshake header.
Moreover, building on these helper functions, it adds a
function ssl_check_hs_header() checking the validity of
a DTLS handshake header with respect to the specification,
i.e. the indicated fragment must be a subrange of the total
handshake message, and the total handshake fragment length
(including header) must not exceed the record content size.
These checks were previously performed at a later stage during
ssl_reassemble_dtls_handshake().
This commit introduces a static helper function ssl_get_hs_total_len()
parsing the total message length field in the handshake header, and
puts it to use in mbedtls_ssl_prepare_handshake_record().
This commit introduces, but does not yet put to use, a sub-structure
of mbedtls_ssl_handshake_params::buffering that will be used for the
buffering and/or reassembly of handshake messages with handshake
sequence numbers that are greater or equal to the next expected
sequence number.
This commit introduces a sub-structure `buffering` within
mbedtls_ssl_handshake_params that shall contain all data
related to the reassembly and/or buffering of handshake
messages.
Currently, only buffering of CCS messages is implemented,
so the only member of this struct is the previously introduced
`seen_ccs` field.
This commit introduces a static function ssl_hs_is_proper_fragment()
to check if the current incoming handshake message is a proper fragment.
It is used within mbedtls_ssl_prepare_handshake_record() to decide whether
handshake reassembly through ssl_reassemble_dtls_handshake() is needed.
The commit changes the behavior of the library in the (unnatural)
situation where proper fragments for a handshake message are followed
by a non-fragmented version of the same message. In this case,
the previous code invoked the handshake reassembly routine
ssl_reassemble_dtls_handshake(), while with this commit, the full
handshake message is directly forwarded to the user, no altering
the handshake reassembly state -- in particular, not freeing it.
As a remedy, freeing of a potential handshake reassembly structure
is now done as part of the handshake update function
mbedtls_ssl_update_handshake_status().
This commit adds a parameter to ssl_prepare_reassembly_buffer()
allowing to disable the allocation of space for a reassembly bitmap.
This will allow this function to be used for the allocation of buffers
for future handshake messages in case these need no fragmentation.
This commit moves the code-path preparing the handshake
reassembly buffer, consisting of header, message content,
and reassembly bitmap, to a separate function
ssl_prepare_reassembly_buffer().
This leads future HS messages to traverse the buffering
function ssl_buffer_message(), which however doesn't do
anything at the moment for HS messages. Since the error
code MBEDTLS_ERR_SSL_EARLY_MESSAGE is afterwards remapped
to MBEDTLS_ERR_SSL_CONTINUE_PROCESSING -- which is what
was returned prior to this commit when receiving a future
handshake message -- this commit therefore does not yet
introduce any change in observable behavior.
This commit implements support for remembering out-of-order
CCS messages. Specifically, a flag is set whenever a CCS message
is read which remains until the end of a flight, and when a
CCS message is expected and a CCS message has been seen in the
current flight, a synthesized CCS record is created.
This commit introduces a function ssl_record_is_in_progress()
to indicate if there is there is more data within the current
record to be processed. Further, it moves the corresponding
call from ssl_read_record_layer() to the parent function
mbedtls_ssl_read_record(). With this change, ssl_read_record_layer()
has the sole purpose of fetching and decoding a new record,
and hence this commit also renames it to ssl_get_next_record().
Subsequent commits will potentially inject buffered
messages after the last incoming message has been
consumed, but before a new one is fetched. As a
preparatory step to this, this commit moves the call
to ssl_consume_current_message() from ssl_read_record_layer()
to the calling function mbedtls_ssl_read_record().
The first part of the function ssl_read_record_layer() was
to mark the previous message as consumed. This commit moves
the corresponding code-path to a separate static function
ssl_consume_current_message().
This function was previously global because it was
used directly within ssl_parse_certificate_verify()
in library/ssl_srv.c. The previous commit removed
this dependency, replacing the call by a call to
the global parent function mbedtls_ssl_read_record().
This renders mbedtls_ssl_read_record_layer() internal
and therefore allows to make it static, and accordingly
rename it as ssl_read_record_layer().
Usually, debug messages beginning with "=> and "<="
match up and indicate entering of and returning from
functions, respectively. This commit fixes one exception
to this rule in mbedtls_ssl_read_record(), which sometimes
printed two messages of the form "<= XXX".
Previously, mbedtls_ssl_read_record() always updated the handshake
checksum in case a handshake record was received. While desirable
most of the time, for the CertificateVerify message the checksum
update must only happen after the message has been fully processed,
because the validation requires the handshake digest up to but
excluding the CertificateVerify itself. As a remedy, the bulk
of mbedtls_ssl_read_record() was previously duplicated within
ssl_parse_certificate_verify(), hardening maintenance in case
mbedtls_ssl_read_record() is subject to changes.
This commit adds a boolean parameter to mbedtls_ssl_read_record()
indicating whether the checksum should be updated in case of a
handshake message or not. This allows using it also for
ssl_parse_certificate_verify(), manually updating the checksum
after the message has been processed.
This for example lead to the following corner case bug:
The code attempted to piggy-back a Finished message at
the end of a datagram where precisely 12 bytes of payload
were still available. This lead to an empty Finished fragment
being sent, and when mbedtls_ssl_flight_transmit() was called
again, it believed that it was just starting to send the
Finished message, thereby calling ssl_swap_epochs() which
had already happened in the call sending the empty fragment.
Therefore, the second call would send the 'rest' of the
Finished message with wrong epoch.
This commit adds a public function
`mbedtls_ssl_conf_datagram_packing()`
that allows to allow / forbid the packing of multiple
records within a single datagram.
The `partial` argument is only used when DTLS and same port
client reconnect are enabled. This commit marks the variable
as unused if that's not the case.
If neither the maximum fragment length extension nor DTLS
are used, the SSL context argument is unnecessary as the
maximum payload length is hardcoded as MBEDTLS_SSL_MAX_CONTENT_LEN.
This commit finally enables datagram packing by modifying the
record preparation function ssl_write_record() to not always
calling mbedtls_ssl_flush_output().
The packing of multiple records within a single datagram works
by increasing the pointer `out_hdr` (pointing to the beginning
of the next outgoing record) within the datagram buffer, as
long as space is available and no flush was mandatory.
This commit does not yet change the code's behavior of always
flushing after preparing a record, but it introduces the logic
of increasing `out_hdr` after preparing the record, and resetting
it after the flush has been completed.
Previously, the record sequence number was incremented at the
end of each successful call to mbedtls_ssl_flush_output(),
which works as long as there is precisely one such call for
each outgoing record.
When packing multiple records into a single datagram, this
property is no longer true, and instead the increment of the
record sequence number must happen after the record has been
prepared, and not after it has been dispatched.
This commit moves the code for incrementing the record sequence
number from mbedtls_ssl_flush_output() to ssl_write_record().
This commit is another step towards supporting the packing of
multiple records within a single datagram.
Previously, the incremental outgoing record sequence number was
statically stored within the record buffer, at its final place
within the record header. This slightly increased efficiency
as it was not necessary to copy the sequence number when writing
outgoing records.
When allowing multiple records within a single datagram, it is
necessary to allow the position of the current record within the
datagram buffer to be flexible; in particular, there is no static
address for the record sequence number field within the record header.
This commit introduces an additional field `cur_out_ctr` within
the main SSL context structure `mbedtls_ssl_context` to keep track
of the outgoing record sequence number independent of the buffer used
for the current record / datagram. Whenever a new record is written,
this sequence number is copied to the the address `out_ctr` of the
sequence number header field within the current outgoing record.
The SSL/TLS module maintains a number of internally used pointers
`out_hdr`, `out_len`, `out_iv`, ..., indicating where to write the
various parts of the record header.
These pointers have to be kept in sync and sometimes need update:
Most notably, the `out_msg` pointer should always point to the
beginning of the record payload, and its offset from the pointer
`out_iv` pointing to the end of the record header is determined
by the length of the explicit IV used in the current record
protection mechanism.
This commit introduces functions deducing these pointers from
the pointers `out_hdr` / `in_hdr` to the beginning of the header
of the current outgoing / incoming record.
The flexibility gained by these functions will subsequently
be used to allow shifting of `out_hdr` for the purpose of
packing multiple records into a single datagram.
For now, just check that it causes us to fragment. More tests are coming in
follow-up commits to ensure we respect the exact value set, including when
renegotiating.
Note: no interop tests in ssl-opt.sh for now, as some of them make us run into
bugs in (the CI's default versions of) OpenSSL and GnuTLS, so interop tests
will be added later once the situation is clarified. <- TODO
This will allow fragmentation to always happen in the same place, always from
a buffer distinct from ssl->out_msg, and with the same way of resuming after
returning WANT_WRITE
- take advantage of the fact that we're only called for first send
- put all sanity checks at the top
- rename and constify shortcut variables
- improve comments
`mbedtls_ssl_get_record_expansion()` is supposed to return the maximum
difference between the size of a protected record and the size of the
encapsulated plaintext.
It had the following two bugs:
(1) It did not consider the new ChaChaPoly ciphersuites, returning
the error code #MBEDTLS_ERR_SSL_INTERNAL_ERROR in this case.
(2) It did not correctly estimate the maximum record expansion in case
of CBC ciphersuites in (D)TLS versions 1.1 and higher, in which
case the ciphertext is prefixed by an explicit IV.
This commit fixes both bugs.
The length to the debug message could conceivably leak through the time it
takes to print it, and that length would in turn reveal whether padding was
correct or not.
The basis for the Lucky 13 family of attacks is for an attacker to be able to
distinguish between (long) valid TLS-CBC padding and invalid TLS-CBC padding.
Since our code sets padlen = 0 for invalid padding, the length of the input to
the HMAC function, and the location where we read the MAC, give information
about that.
A local attacker could gain information about that by observing via a
cache attack whether the bytes at the end of the record (at the location of
would-be padding) have been read during MAC verification (computation +
comparison).
Let's make sure they're always read.
* development: (180 commits)
Change the library version to 2.11.0
Fix version in ChangeLog for fix for #552
Add ChangeLog entry for clang version fix. Issue #1072
Compilation warning fixes on 32b platfrom with IAR
Revert "Turn on MBEDTLS_SSL_ASYNC_PRIVATE by default"
Fix for missing len var when XTS config'd and CTR not
ssl_server2: handle mbedtls_x509_dn_gets failure
Fix harmless use of uninitialized memory in ssl_parse_encrypted_pms
SSL async tests: add a few test cases for error in decrypt
Fix memory leak in ssl_server2 with SNI + async callback
SNI + SSL async callback: make all keys async
ssl_async_resume: free the operation context on error
ssl_server2: get op_name from context in ssl_async_resume as well
Clarify "as directed here" in SSL async callback documentation
SSL async callbacks documentation: clarify resource cleanup
Async callback: use mbedtls_pk_check_pair to compare keys
Rename mbedtls_ssl_async_{get,set}_data for clarity
Fix copypasta in the async callback documentation
SSL async callback: cert is not always from mbedtls_ssl_conf_own_cert
ssl_async_set_key: detect if ctx->slots overflows
...
For the situation where the mbedTLS device has limited RAM, but the
other end of the connection doesn't support the max_fragment_length
extension. To be spec-compliant, mbedTLS has to keep a 16384 byte
incoming buffer. However the outgoing buffer can be made smaller without
breaking spec compliance, and we save some RAM.
See comments in include/mbedtls/config.h for some more details.
(The lower limit of outgoing buffer size is the buffer size used during
handshake/cert negotiation. As the handshake is half-duplex it might
even be possible to store this data in the "incoming" buffer during the
handshake, which would save even more RAM - but it would also be a lot
hackier and error-prone. I didn't really explore this possibility, but
thought I'd mention it here in case someone sees this later on a mission
to jam mbedTLS into an even tinier RAM footprint.)
It's undesirable to have users of the SSL layer check for an error code
specific to a lower-level layer, both out of general layering principles, and
also because if we later make another crypto module gain resume capabilities,
we would need to change the contract again (checking for a new module-specific
error code).
Summary of merge conflicts:
include/mbedtls/ecdh.h -> documentation style
include/mbedtls/ecdsa.h -> documentation style
include/mbedtls/ecp.h -> alt style, new error codes, documentation style
include/mbedtls/error.h -> new error codes
library/error.c -> new error codes (generated anyway)
library/ecp.c:
- code of an extracted function was changed
library/ssl_cli.c:
- code addition on one side near code change on the other side
(ciphersuite validation)
library/x509_crt.c -> various things
- top fo file: helper structure added near old zeroize removed
- documentation of find_parent_in()'s signature: improved on one side,
added arguments on the other side
- documentation of find_parent()'s signature: same as above
- verify_chain(): variables initialised later to give compiler an
opportunity to warn us if not initialised on a code path
- find_parent(): funcion structure completely changed, for some reason git
tried to insert a paragraph of the old structure...
- merge_flags_with_cb(): data structure changed, one line was fixed with a
cast to keep MSVC happy, this cast is already in the new version
- in verify_restratable(): adjacent independent changes (function
signature on one line, variable type on the next)
programs/ssl/ssl_client2.c:
- testing for IN_PROGRESS return code near idle() (event-driven):
don't wait for data in the the socket if ECP_IN_PROGRESS
tests/data_files/Makefile: adjacent independent additions
tests/suites/test_suite_ecdsa.data: adjacent independent additions
tests/suites/test_suite_x509parse.data: adjacent independent additions
* development: (1059 commits)
Change symlink to hardlink to avoid permission issues
Fix out-of-tree testing symlinks on Windows
Updated version number to 2.10.0 for release
Add a disabled CMAC define in the no-entropy configuration
Adapt the ARIA test cases for new ECB function
Fix file permissions for ssl.h
Add ChangeLog entry for PR#1651
Fix MicroBlaze register typo.
Fix typo in doc and copy missing warning
Fix edit mistake in cipher_wrap.c
Update CTR doc for the 64-bit block cipher
Update CTR doc for other 128-bit block ciphers
Slightly tune ARIA CTR documentation
Remove double declaration of mbedtls_ssl_list_ciphersuites
Update CTR documentation
Use zeroize function from new platform_util
Move to new header style for ALT implementations
Add ifdef for selftest in header file
Fix typo in comments
Use more appropriate type for local variable
...
As a protection against the Lucky Thirteen attack, the TLS code for
CBC decryption in encrypt-then-MAC mode performs extra MAC
calculations to compensate for variations in message size due to
padding. The amount of extra MAC calculation to perform was based on
the assumption that the bulk of the time is spent in processing
64-byte blocks, which is correct for most supported hashes but not for
SHA-384. Correct the amount of extra work for SHA-384 (and SHA-512
which is currently not used in TLS, and MD2 although no one should
care about that).
* development: (504 commits)
Fix minor code style issues
Add the uodate to the soversion to the ChangeLog
Fix the ChangeLog for clarity, english and credit
Update version to 2.9.0
ecp: Fix binary compatibility with group ID
Changelog entry
Change accepted ciphersuite versions when parsing server hello
Remove preprocessor directives around platform_util.h include
Fix style for mbedtls_mpi_zeroize()
Improve mbedtls_platform_zeroize() docs
mbedtls_zeroize -> mbedtls_platform_zeroize in docs
Reword config.h docs for MBEDTLS_PLATFORM_ZEROIZE_ALT
Organize CMakeLists targets in alphabetical order
Organize output objs in alfabetical order in Makefile
Regenerate errors after ecp.h updates
Update ecp.h
Change variable bytes_written to header_bytes in record decompression
Update ecp.h
Update ecp.h
Update ecp.h
...
Rename to mbedtls_ssl_get_async_operation_data and
mbedtls_ssl_set_async_operation_data so that they're about
"async operation data" and not about some not-obvious "data".
When a handshake step starts an asynchronous operation, the
application needs to know which SSL connection the operation is for,
so that when the operation completes, the application can wake that
connection up. Therefore the async start callbacks need to take the
SSL context as an argument. It isn't enough to let them set a cookie
in the SSL connection, the application needs to be able to find the
right SSL connection later.
Also pass the SSL context to the other callbacks for consistency. Add
a new field to the handshake that the application can use to store a
per-connection context. This new field replaces the former
context (operation_ctx) that was created by the start function and
passed to the resume function.
Add a boolean flag to the handshake structure to track whether an
asynchronous operation is in progress. This is more robust than
relying on the application to set a non-null application context.
Change the signature of mbedtls_ssl_handshake_free again. Now take the
whole SSL context as argument and not just the configuration and the
handshake substructure.
This is in preparation for changing the asynchronous cancel callback
to take the SSL context as an argument.
Conflict resolution:
* ChangeLog: put the new entry from my branch in the proper place.
* include/mbedtls/error.h: counted high-level module error codes again.
* include/mbedtls/ssl.h: picked different numeric codes for the
concurrently added errors; made the new error a full sentence per
current standards.
* library/error.c: ran scripts/generate_errors.pl.
* library/ssl_srv.c:
* ssl_prepare_server_key_exchange "DHE key exchanges": the conflict
was due to style corrections in development
(4cb1f4d49c) which I merged with
my refactoring.
* ssl_prepare_server_key_exchange "For key exchanges involving the
server signing", first case, variable declarations: merged line
by line:
* dig_signed_len: added in async
* signature_len: removed in async
* hashlen: type changed to size_t in development
* hash: size changed to MBEDTLS_MD_MAX_SIZE in async
* ret: added in async
* ssl_prepare_server_key_exchange "For key exchanges involving the
server signing", first cae comment: the conflict was due to style
corrections in development (4cb1f4d49c)
which I merged with my comment changes made as part of refactoring
the function.
* ssl_prepare_server_key_exchange "Compute the hash to be signed" if
`md_alg != MBEDTLS_MD_NONE`: conflict between
ebd652fe2d
"ssl_write_server_key_exchange: calculate hashlen explicitly" and
46f5a3e9b4 "Check return codes from
MD in ssl code". I took the code from commit
ca1d742904 made on top of development
which makes mbedtls_ssl_get_key_exchange_md_ssl_tls return the
hash length.
* programs/ssl/ssl_server2.c: multiple conflicts between the introduction
of MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS and new auxiliary functions and
definitions for async support, and the introduction of idle().
* definitions before main: concurrent additions, kept both.
* main, just after `handshake:`: in the loop around
mbedtls_ssl_handshake(), merge the addition of support for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS and SSL_ASYNC_INJECT_ERROR_CANCEL
with the addition of the idle() call.
* main, if `opt.transport == MBEDTLS_SSL_TRANSPORT_STREAM`: take the
code from development and add a check for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS.
* main, loop around mbedtls_ssl_read() in the datagram case:
take the code from development and add a check for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS; revert to a do...while loop.
* main, loop around mbedtls_ssl_write() in the datagram case:
take the code from development and add a check for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS; revert to a do...while loop.
