Don't default to unbridled -j, which causes a load spike and isn't really
faster.
"Number of CPUs" is implemented here as a reasonable compromise between
portability, correctness and simplicity. This is just a default that can be
overridden by setting MAKEFLAGS in the environment.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
redirect_out was no longer used and redirect_err was only used to
quiet dd. Change the dd invocation to only print diagnostics on
error (on platforms where this is possible).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is necessary to actually keep going and finish the
component-specific cleanup in component_test_cmake_out_of_source if
ssl-opt.err is non-empty.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In all.sh, when an explicit list of components is specified, error out
if one of the components is not known or not supported. Patterns that
happen to match zero components are still effectively ignored.
Fix#2783
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In the `not` function, in keep-going mode, arrange to report the
failing command (rather than `"$@"`).
Note that the `!` keyword should not be used, because failures with
`!` are not reported properly.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove the obsolete functions record_status and if_build_succeeded.
They didn't affect error detection, but they made error reporting
worse since $BASH_COMMAND would be the unexpanded "$@".
Keep the function definitions for the sake of pull requests using them
that may still be in flight.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove ssl-opt.err even if it's empty.
Call cat unconditionally: it'll have no visible effect if the file is
empty.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit completely rewrites keep-going mode. Instead of relying
solely on "set -e", which has some subtle limitations (such as being
off anywhere inside a conditional), use an ERR trap to record errors.
Run each component in a subshell. This way a component can set
environment variables, change the current directory, etc., without
affecting other components.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This will let us use bash features that are not found in some other sh
implementations, such as DEBUG and ERR traps, "set -o pipefail", etc.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
* There's no compat-2.x.h in Mbed TLS 2.x, but there's a compat-1.3.h which
similarly needs to be excluded.
* mbedtls_config.h is called config.h.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't try to enumerate excluded files. List included files, and remove names
from the list if they match an excluded-file pattern.
This resolves the problem that the script could get into an infinite loop
due to the use of recursive globbing. Unfortunately, Python's recursive
globs follows symbolic links to directories, which leads to an infinite loop
if a symbolic link points to an ancestor of the directory that contains it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Copy the following files:
tests/scripts/check_names.py
tests/scripts/list_internal_identifiers.py
tests/scripts/list-identifiers.sh
Copy the version from b19be6b5f3c9a92b5b17fa27e16901f132f1a310, which is the
result of merging https://github.com/ARMmbed/mbedtls/pull/1638 into the
development branch.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
To facilitate maintenance and to make it easier to reproduce all.sh builds
manually, remove the long, repeated list of -D options from
component_test_psa_crypto_config_basic and component_test_psa_crypto_drivers
and put it in a header file instead.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When building with make, `make test` runs `run-test-suites.pl` which has a
verbose mode that reports the failing test cases, but it didn't provide a
way to enable this verbose mode. With the present commit, you can run `make
test TEST_FLAGS=-v` to use verbose mode.
Base the default for verbose mode on the same environment variable that
`make test` uses when building with CMake: default off, but enabled if
`CTEST_OUTPUT_ON_FAILURE` is true. In particular, verbose mode will now be
on when building from `all.sh`.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It was unmaintained and untested, and the fear of breaking it was holding us
back. Resolves#4934.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Was getting errors like:
In file included from /usr/include/limits.h:25:0,
from /usr/lib/gcc-cross/arm-linux-gnueabi/5/include-fixed/limits.h:168,
from /usr/lib/gcc-cross/arm-linux-gnueabi/5/include-fixed/syslimits.h:7,
from /usr/lib/gcc-cross/arm-linux-gnueabi/5/include-fixed/limits.h:34,
from ../include/mbedtls/check_config.h:30,
from ../include/mbedtls/build_info.h:81,
from common.h:26,
from asn1write.c:20:
/usr/include/features.h:367:25: fatal error: sys/cdefs.h: No such file or directory
There are two packages to choose from: armhf or armel. Since the comment
in all.sh says we're trying to be close to Debian's "armel"
architecture, choose that, and fix a comment that was mentioning
gnueabihf for no apparent reason.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Currently it can't be mandatory, since we can't install the required toolchain
on Jenkins right away.
Also, while at it, remove `SHELL='sh -x'` from the other arm5vte component; it
was a leftover from debugging.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The previous implementation was hard to understand and could in principle
fail to notice if there was a test case failure and the writing of the
line "Note: $TOTAL_FAIL failures." failed. KISS.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Save the "Test Report Summary" to a file. This can help both CI scripts and
human readers who want the summary after the fact without having to copy the
console output.
Take care to exit with a nonzero status if there is a failure while
generating the test report summary.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Restore the optimization done in
HEAD^{/Speed up the generation of storage format test cases}
which was lost during refactoring made when adding support for
implicit usage flags.
There are still more than one call to the C compiler, but the extra
calls are only for some key usage test cases.
This is an internal refactoring. This commit does not change the
output of generate_psa_tests.py
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It is enough only one test case for a key type, algorithm pair when
testing the implicit usage flags.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Add test cases validating that if a stored key only had the hash policy,
then after loading it psa_get_key_attributes reports that it also has the
message policy, and the key can be used with message functions.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Backport 2.x: Fix and test the MBEDTLS_PSA_CRYPTO_SPM build
Straightforward backport from development to developement_2.x plus one trivial commit, only one approval is enough.
Remove late binding of iterators to enable the creation of an object
with an actual state of a variable.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Test keys with various persistence levels, enumerated from the
metadata tests.
For read-only keys, do not attempt to create or destroy the key
through the API, only to read a key that has been injected into
storage directly through filesystem access.
Do not test keys with a non-default location, since they require a
driver and we do not yet have a dependency mechanism to require the
presence of a driver for a specific location value.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The call to `tests/scripts/generate_psa_tests.py` added by the commit
"generate_psa_tests.py: allow generating each file independently"
assumed that the `check` function supports multiple file names, but in
fact it does not do so. When `generate_psa_tests.py` started generating
more than one file, `check-generated-files.sh` did not detect changes to
files other than the first one listed by `generate_psa_tests.py --list`.
Fix this: change `check` to support either a single directory (with
detection of added/removed files) or a list of files (which is assumed
to be static).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In macro_collector.py, base InputsForTest on PSAMacroEnumerator rather
than PSAMacroCollector. It didn't make much sense to use
PSAMacroCollector anymore since InputsForTest didn't use anything
other than the constructor.
psa_generate_tests now generates arguments for more macros.
In particular, it now collects macro arguments from
test_suite_psa_crypto_metadata. Algorithms with parameters are now
supported.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
First build a list of all keys, then construct all the corresponding
test cases. This allows all required information to be obtained in
one go, which is a significant performance gain as the information
includes numerical values obtained by compiling a C program.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In generate_psa_tests, use InputsForTest rather than PSAMacroCollector
to gather values. This way, the enumeration of values to test includes
values used in metadata tests in addition to constructors parsed from
header files. This allows greater coverage of values built from
constructors with arguments. This doesn't make a difference yet, but
it will once algorithm constructors with arguments are supported in
generate_psa_tests.
Make the injection of numerical values optional. They are useful for
test_psa_constant_names, so keep them there. Don't use them for
not-supported tests: they might make sense, but the current code
wouldn't work since it doesn't know how to make up fake key material
or what dependencies to generate. Don't use them for storage tests:
they only make sense for supported values.
Don't inject 'PSA_SUCCESS': that's superfluous.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
On space-constrained platforms, it is a useful configuration to be able
to import/export and perform RSA key pair operations, but to exclude RSA
key generation, potentially saving flash space. It is not possible to
express this with the PSA_WANT_ configuration system at the present
time. However, in previous versions of Mbed TLS (v2.24.0 and earlier) it
was possible to configure a software PSA implementation which was
capable of making RSA signatures but not capable of generating RSA keys.
To do this, one unset MBEDTLS_GENPRIME.
Since the addition of MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR, this
expressivity was lost. Expressing that you wanted to work with RSA key
pairs forced you to include the ability to generate key pairs as well.
Change psa_crypto_rsa.c to only call mbedtls_rsa_gen_key() if
MBEDTLS_GENPRIME is also set. This restores the configuration behavior
present in Mbed TLS v2.24.0 and earlier versions.
It left as a future exercise to add the ability to PSA to be able to
express a desire for a software or accelerator configuration that
includes RSA key pair operations, like signature, but excludes key pair
generation.
Without this change, linker errors will occur when attempts to call,
which doesn't exist when MBEDTLS_GENPRIME is unset.
psa_crypto_rsa.c.obj: in function `rsa_generate_key':
psa_crypto_rsa.c:320: undefined reference to `mbedtls_rsa_gen_key'
Fixes#4512
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
This configuration file was useful in the early days of PSA crypto
development. It stopped becoming relevant when MBEDTLS_PSA_CRYPTO_C entered
the default configuration. Remove it: better late than never.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
According to the design in psa-driver-interface.md. Compiles without
issue in test_psa_crypto_drivers.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Add library/*.h to the list of files scanned for enums in
list-enum-consts.sh, consistent with the changes made to
list-macros.sh.
This is needed to ensure that check-names.sh passes for the MPS
trace enums.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Add cipher accelerator compilation flags to
test_psa_crypto_drivers() all.sh component. The flags
are not necessary currently but may become.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Test cipher operations by a transparent driver in all.sh
test_psa_crypto_config_basic and
test_psa_crypto_drivers components.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Given the PSA_WANT_* config options added lately,
update set_psa_test_dependencies.py and run it
on test_suite_psa_crypto*.data files but the SE
and generated ones.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Fine tune handling of policy negative tests when
setting automatically PSA crypto unit tests
dependencies.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
For the time being, it is not possible to determine
the size of ECC keys from the arguments of all test
cases thus treat them as dependencies that are not
systematic. Such dependencies are not generated nor
deleted by set_psa_test_dependencies.py.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Generate test cases for all algorithms without parameters. Only the encoding
of the algorithm in the key metadata is covered: the test keys are not of a
type that permits the algorithm to be used in an operation.
This commit only covers algorithms without parameters. A subsequent commit
will generate algorithms with parameters.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Generate test cases for all key types. These test cases cover the key
representation (checked with export) and the encoding of the key type and
the bit-size.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Start generating storage format test cases. This commit introduces two test
data files: test_suite_psa_crypto_storage_format.v0.data for reading keys in
storage format version 0 (the current version at this time), and
test_suite_psa_crypto_storage_format.current.data for saving keys in the
current format (version 0 at this time).
This commit kicks off the test case generation with test cases to exercise
the encoding of usage flags. Subsequent commits will cover other aspects of
keys.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Split out the code that enumerates constructors of a PSA crypto type
from the code used to populate the list of constructors for the
specific purpose of testing psa_constant_names.
This commit adds some documentation but otherwise strives to minimize
code changes.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Generating all files all the time makes debugging one specific target
harder. So support generating a selection of targets only.
As a bonus, it is now more apparent what files this script generates,
and check-generated-files.sh takes advantage of it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Use separate classes for information gathering, for each kind of test
generation (currently just one: not-supported), and for writing output
files.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test hash algorithm functions when called through a transparent
driver in all.sh test_psa_crypto_config_basic and
test_psa_crypto_drivers components.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
