In the entries (mbedtls_x509_crl_entry values) on the list constructed
by mbedtls_x509_crl_parse_der(), set entry->raw.tag to
(SEQUENCE | CONSTRUCTED) rather than to the tag of the first ASN.1
element of the entry (which happens to be the tag of the serial
number, so INTEGER or INTEGER | CONTEXT_SPECIFIC). This is doesn't
really matter in practice (and in particular the value is never used
in Mbed TLS itself), and isn't documented, but at least it's
consistent with how mbedtls_x509_buf is normally used.
The primary importance of this change is that the old code tried to
access the tag of the first element of the entry even when the entry
happened to be empty. If the entry was empty and not followed by
anything else in the CRL, this could cause a read 1 byte after the end
of the buffer containing the CRL.
The test case "X509 CRL ASN1 (TBSCertList, single empty entry at end)"
hit the problematic buffer overflow, which is detected with ASan.
Credit to OSS-Fuzz for detecting the problem.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add a few more negative test cases for mbedtls_x509_crl_parse.
The test data is manually adapted from the existing positive test case
"X509 CRL ASN1 (TBSCertList, sig present)" which decomposes as
305c
3047 tbsCertList TBSCertList
020100 version INTEGER OPTIONAL
300d signatureAlgorithm AlgorithmIdentifier
06092a864886f70d01010e
0500
300f issuer Name
310d300b0603550403130441424344
170c303930313031303030303030 thisUpdate Time
3014 revokedCertificates
3012 entry 1
8202abcd userCertificate CertificateSerialNumber
170c303831323331323335393539 revocationDate Time
300d signatureAlgorithm AlgorithmIdentifier
06092a864886f70d01010e
0500
03020001 signatureValue BIT STRING
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add the missing executable in the list of executables
to install.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Reorder declaration of executables in alphabetic order.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
While pure sh doesn't have a concept of local variables, we can partially
emulate them by unsetting variables before we exit the function, and use the
convention of giving them lowercase names to distinguish from global
variables.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The list in the pre-push hook was redundant with the list of `check_*`
components in all.sh, and unsurprisingly it was outdated.
Missing components were:
- check_recursion
- check_changelog
- check_test_cases
- check_python_files
- check_generate_test_code
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The primary purpose is to use it to run all.sh -k -q in the pre-push hook, but
this can be useful in any circumstance where you're not interested in the full
output from each component and just want a short summary of which components
were run (and if any failed).
Note that only stdout from components is suppressed, stderr is preserved so
that errors are reported. This means components should avoid printing to
stderr in normal usage (ie in the absence of errors).
Currently all the `check_*` components obey this convention except:
- check_generate_test_code: unittest prints progress to stderr
- check_test_cases: lots of non-fatal warnings printed to stderr
These components will be fixed in follow-up commits.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
- it's 2020, there shouldn't be too many systems out there where SHA-1 is the
only available hash option, so its usefulness is limited
- OTOH testing configurations without SHA-2 reveal bugs that are not easy to
fix in a fully compatible way
So overall, the benefit/cost ratio is not good enough to justify keeping SHA-1
as a fallback option here.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The previous commit introduced a potential memory overread by reading
secret_len bytes from secret->p, while the is no guarantee that secret has
enough limbs for that.
Fix that by using an intermediate buffer and mpi_write_binary().
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The dependency on a DRBG module was perhaps a bit strict for LTS branches, so
let's have an option that works with no DRBG when at least one SHA module is
present.
This changes the internal API of ecp_drbg_seed() by adding the size of the
MPI as a parameter. Re-computing the size from the number of limbs doesn't
work too well here as we're writing out to a fixed-size buffer and for some
curves (P-521) that would round up too much. Using mbedtls_mpi_get_len() is
not entirely satisfactory either as it would mean using a variable-length
encoding, with could open side channels.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
It results in smaller code than using CTR_DRBG (64 bytes smaller on ARMv6-M
with arm-none-eabi-gcc 7.3.1), so let's use this by default when both are
available.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Unless MBEDTLS_ECP_NO_INTERNAL_RNG is defined, it's no longer possible for
f_rng to be NULL at the places that randomize coordinates.
Eliminate the NULL check in this case:
- it makes it clearer to reviewers that randomization always happens (unless
the user opted out at compile time)
- a NULL check in a place where it's easy to prove the value is never NULL
might upset or confuse static analyzers (including humans)
- removing the check saves a bit of code size
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The case of MBEDTLS_ECP_RESTARTABLE isn't handled correctly yet: in that case
the DRBG instance should persist when resuming the operation. This will be
addressed in the next commit.
When both CTR_DRBG and HMAC_DRBG are available, CTR_DRBG is preferred since
both are suitable but CTR_DRBG tends to be faster and I needed a tie-breaker.
There are currently three possible cases to test:
- NO_INTERNAL_RNG is set -> tested in test_ecp_no_internal_rng
- it's unset and CTR_DRBG is available -> tested in the default config
- it's unset and CTR_DRBG is disabled -> tested in
test_ecp_internal_rng_no_ctr_drbg
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
No effect so far, except on dependency checking, as the feature it's meant to
disable isn't implemented yet (so the descriptions in config.h and the
ChangeLog entry are anticipation for now).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This will allow us to ship the LTS branches in a single archive
This commit was generated using the following script:
# ========================
#!/bin/sh
header1='\ * SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later\
*\
* This file is provided under the Apache License 2.0, or the\
* GNU General Public License v2.0 or later.\
*\
* **********\
* Apache License 2.0:\
*\
* Licensed under the Apache License, Version 2.0 (the "License"); you may\
* not use this file except in compliance with the License.\
* You may obtain a copy of the License at\
*\
* http://www.apache.org/licenses/LICENSE-2.0\
*\
* Unless required by applicable law or agreed to in writing, software\
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT\
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\
* See the License for the specific language governing permissions and\
* limitations under the License.\
*\
* **********\
*\
* **********\
* GNU General Public License v2.0 or later:\
*\
* This program is free software; you can redistribute it and/or modify\
* it under the terms of the GNU General Public License as published by\
* the Free Software Foundation; either version 2 of the License, or\
* (at your option) any later version.\
*\
* This program is distributed in the hope that it will be useful,\
* but WITHOUT ANY WARRANTY; without even the implied warranty of\
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\
* GNU General Public License for more details.\
*\
* You should have received a copy of the GNU General Public License along\
* with this program; if not, write to the Free Software Foundation, Inc.,\
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.\
*\
* **********'
find -path './.git' -prune -o '(' -name '*.c' -o -name '*.cpp' -o -name '*.fmt' -o -name '*.h' ')' -print | xargs sed -i "
# Normalize the first line of the copyright headers (no text on the first line of a block comment)
/^\/\*.*Copyright.*Arm/I s/\/\*/&\n */
# Insert new copyright header
/SPDX-License-Identifier/ i\
$header1
# Delete old copyright header
/SPDX-License-Identifier/,$ {
# Delete lines until the one preceding the mbedtls declaration
N
1,/This file is part of/ {
/This file is part of/! D
}
}
"
# Format copyright header for inclusion into scripts
header2=$(echo "$header1" | sed 's/^\\\? \* \?/#/')
find -path './.git' -prune -o '(' -name '*.gdb' -o -name '*.pl' -o -name '*.py' -o -name '*.sh' ')' -print | xargs sed -i "
# Insert new copyright header
/SPDX-License-Identifier/ i\
$header2
# Delete old copyright header
/SPDX-License-Identifier/,$ {
# Delete lines until the one preceding the mbedtls declaration
N
1,/This file is part of/ {
/This file is part of/! D
}
}
"
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
By convention, in the project, functions that have a
check or similar in the name return 0 if the check
succeeds, non-zero otherwise. Align with this for
mbedtls_ssl_chk_buf_ptr().
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This commit adds an error condition for bad user configurations
and updates the number of SSL module errors in error.h.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This commit uses the previously defined macro to uniformize
bounds checks in several places. It also adds bounds checks to
the ClientHello writing function that were previously missing.
Also, the functions adding extensions to the ClientHello message
can now fail if the buffer is too small or a different error
condition occurs, and moreover they take an additional buffer
end parameter to free them from the assumption that one is
writing to the default output buffer.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This commit adds a macro for buffer bounds checks in the SSL
module. It takes the buffer's current and end position as the
first argument(s), followed by the needed space; if the
available space is too small, it returns an SSL_BUFFER_TOO_SMALL
error.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
