If psa_key_agreement_ecdh fails, there may be output that leaks
sensitive information in the output buffer. Zeroize it.
If this is due to an underlying failure in the ECDH implementation, it
is currently not an issue since both the traditional Mbed TLS/Crypto
implementation and Everest only write to the output buffer once every
intermediate step has succeeded, but zeroizing is more robust. If this
is because the recently added key size check fails, a leak could be a
serious issue.
All key types now have an encoding on 32 bits where the bottom 16 bits
are zero. Change to using 16 bits only.
Keep 32 bits for key types in storage, but move the significant
half-word from the top to the bottom.
Likewise, change EC curve and DH group families from 32 bits out of
which the top 8 and bottom 16 bits are zero, to 8 bits only.
Reorder psa_core_key_attributes_t to avoid padding.
Remove the values of curve encodings that are based on the TLS registry
and include the curve size, keeping only the new encoding that merely
encodes a curve family in 8 bits.
Keep the old constant names as aliases for the new values and
deprecate the old names.
Define constants for ECC curve families and DH group families. These
constants have 0x0000 in the lower 16 bits of the key type.
Support these constants in the implementation and in the PSA metadata
tests.
Switch the slot management and secure element driver HAL tests to the
new curve encodings. This requires SE driver code to become slightly
more clever when figuring out the bit-size of an imported EC key since
it now needs to take the data size into account.
Switch some documentation to the new encodings.
Remove the macro PSA_ECC_CURVE_BITS which can no longer be implemented.
Change the representation of psa_ecc_curve_t and psa_dh_group_t from
the IETF 16-bit encoding to a custom 24-bit encoding where the upper 8
bits represent a curve family and the lower 16 bits are the key size
in bits. Families are based on naming and mathematical similarity,
with sufficiently precise families that no two curves in a family have
the same bit size (for example SECP-R1 and SECP-R2 are two different
families).
As a consequence, the lower 16 bits of a key type value are always
either the key size or 0.
Internally, use the corresponding function from psa_crypto.c instead.
Externally, this function is not used in Mbed TLS and is documented as
"may change at any time".
Don't rely on the bit size encoded in the PSA curve identifier, in
preparation for removing that.
For some inputs, the error code on EC key creation changes from
PSA_ERROR_INVALID_ARGUMENT to PSA_ERROR_NOT_SUPPORTED or vice versa.
There will be further such changes in subsequent commits.
When mbedtls_x509_crt_parse_path() checks each object in the supplied path, it only processes regular files. This change makes it also accept a symlink to a file. Fixes#3005.
This was observed to be a problem on Fedora/CentOS/RHEL systems, where the ca-bundle in the default location is actually a symlink.
ssl_decompress_buf() was operating on data from the ssl context, but called at
a point where this data is actually in the rec structure. Call it later so
that the data is back to the ssl structure.
Otherwise these values are recomputed in mbedtls_rsa_deduce_crt, which
currently suffers from side channel issues in the computation of QP (see
https://eprint.iacr.org/2020/055). By loading the pre-computed values not
only is the side channel avoided, but runtime overhead of loading RSA keys
is reduced.
Discussion in https://github.com/ARMmbed/mbed-crypto/issues/347
If Y was constructed through functions in this module, then Y->n == 0
iff Y->p == NULL. However we do not prevent filling mpi structures
manually, and zero may be represented with n=0 and p a valid pointer.
Most of the code can cope with such a representation, but for the
source of mbedtls_mpi_copy, this would cause an integer underflow.
Changing the test for zero from Y->p==NULL to Y->n==0 causes this case
to work at no extra cost.
If psa_mac_finish_internal fails (which can only happen due to bad
parameters or hardware problem), the error code was converted to
PSA_ERROR_INVALID_SIGNATURE if the uninitialized stack variable
actual_mac happened to contain the expected MAC. This is a minor bug
but it may be possible to leverage it as part of a longer attack path
in some scenarios.
Reported externally. Found by static analysis.
The library style is to start with the includes corresponding to the
current module and then the rest in alphabetical order. Some modules
have several header files (eg. ssl_internal.h).
The recently added error.h includes did not respect this convention and
this commit restores it. In some cases this is not possible just by
moving the error.h declarations. This commit fixes the pre-existing
order in these instances too.
Now that the Error module has error codes as well and is processed by
the generate_errors script like any other module, we don't need to
include the header manually.
One of the error codes was already reserved, this commit just makes it
explicit. The other one is a new error code for initializing return
values in the library: `MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED` should
not be returned by the library. If it is returned, then it is surely a
bug in the library or somebody is tampering with the device.
One of the error codes was already reserved, this commit just makes it
explicit. The other one is a new error code for initializing return
values in the library: `MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED` should
not be returned by the library. If it is returned, then it is surely a
bug in the library or somebody is tampering with the device.
The functions mbedtls_ctr_drbg_random() and
mbedtls_ctr_drbg_random_with_add() could return 0 if an AES function
failed. This could only happen with alternative AES
implementations (the built-in implementation of the AES functions
involved never fail), typically due to a failure in a hardware
accelerator.
Bug reported and fix proposed by Johan Uppman Bruce and Christoffer
Lauri, Sectra.
Rename some macros and functions related to signature which are
changing as part of the addition of psa_sign_message and
psa_verify_message.
perl -i -pe '%t = (
PSA_KEY_USAGE_SIGN => PSA_KEY_USAGE_SIGN_HASH,
PSA_KEY_USAGE_VERIFY => PSA_KEY_USAGE_VERIFY_HASH,
PSA_ASYMMETRIC_SIGNATURE_MAX_SIZE => PSA_SIGNATURE_MAX_SIZE,
PSA_ASYMMETRIC_SIGN_OUTPUT_SIZE => PSA_SIGN_OUTPUT_SIZE,
psa_asymmetric_sign => psa_sign_hash,
psa_asymmetric_verify => psa_verify_hash,
); s/\b(@{[join("|", keys %t)]})\b/$t{$1}/ge' $(git ls-files . ':!:**/crypto_compat.h')
* origin/pr/2854:
Shorter version of mbedtls_ssl_send_fatal_handshake_failure
Resolve#2801 - remove repetitive assignment to ssl->in_msg (the first value was never used)
Resolve#2800 - move declaration to avoid unused variable warning in case MBEDTLS_SSL_PROTO_DTLS was undefined
Resolve#2717 - remove erroneous sizeof (the operator was applied to constant integer number)
In the CTR_DRBG module, add selftest data for when
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is enabled.
I generated the test data by running our own code. This is ok because
we have other tests that ensure that the algorithm is implemented
correctly.
This makes programs/self/selftest pass when
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is enabled.
First deal with deleted files.
* Files deleted by us: keep them deleted.
* Files deleted by them, whether modified by us or not: keep our version.
```
git rm $(git status -s | sed -n 's/^DU //p')
git reset -- $(git status -s | sed -n 's/^D //p')
git checkout -- $(git status -s | sed -n 's/^ D //p')
git add -- $(git status -s | sed -n 's/^UD //p')
```
Individual files with conflicts:
* `3rdparty/everest/library/Hacl_Curve25519_joined.c`: spurious conflict because git mistakenly identified this file as a rename. Keep our version.
* `README.md`: conflict due to their change in a paragraph that doesn't exist in our version. Keep our version of this paragraph.
* `docs/architecture/Makefile`: near-identical additions. Adapt the definition of `all_markdown` and include the clean target.
* `doxygen/input/docs_mainpage.h`: conflict in the version number. Keep our version number.
* `include/mbedtls/config.h`: two delete/modify conflicts. Keep the removed chunks out.
* `library/CMakeLists.txt`: discard all their changes as they are not relevant.
* `library/Makefile`:
* Discard the added chunk about the crypto submodule starting with `INCLUDING_FROM_MBEDTLS:=1`.
* delete/modify: keep the removed chunk out.
* library build: This is almost delete/modify. Their changes are mostly not applicable. Do keep the `libmbedcrypto.$(DLEXT): | libmbedcrypto.a` order dependency.
* `.c.o`: `-o` was added on both sides but in a different place. Change to their place.
* `library/error.c`: to be regenerated.
* `library/version_features.c`: to be regenerated.
* `programs/Makefile`: Most of the changes are not relevant. The one relevant change is in the `clean` target for Windows; adapt it by removing `/S` from our version.
* `programs/test/query_config.c`: to be regenerated.
* `scripts/config.py`: added in parallel on both sides. Keep our version.
* `scripts/footprint.sh`: parallel changes. Keep our version.
* `scripts/generate_visualc_files.pl`: one delete/modify conflict. Keep the removed chunks out.
* `tests/Makefile`: discard all of their changes.
* `tests/scripts/all.sh`:
* `pre_initialize_variables` add `append_outcome`: add it.
* `pre_initialize_variables` add `ASAN_CFLAGS`: already there, keep our version.
* `pre_parse_command_line` add `--no-append-outcome`: add it.
* `pre_parse_command_line` add `--outcome-file`: add it.
* `pre_print_configuration`: add `MBEDTLS_TEST_OUTCOME_FILE`.
* Several changes in SSL-specific components: keep our version without them.
* Several changes where `config.pl` was changed to `config.py` and there was an adjacent difference: keep our version.
* Changes regarding the inclusion of `MBEDTLS_MEMORY_xxx`: ignore them here, they will be normalized in a subsequent commit.
* `component_test_full_cmake_gcc_asan`: add it without the TLS tests.
* `component_test_no_use_psa_crypto_full_cmake_asan`: keep the fixed `msg`, discard other changes.
* `component_test_memory_buffer_allocator_backtrace`, `component_test_memory_buffer_allocator`: add them without the TLS tests.
* `component_test_m32_everest`: added in parallel on both sides. Keep our version.
* `tests/scripts/check-names.sh`, `tests/scripts/list-enum-consts.pl`, `tests/scripts/list-identifiers.sh`, ``tests/scripts/list-macros.sh`: discard all of their changes.
* `tests/scripts/test-ref-configs.pl`: the change in the conflict is not relevant, so keep our version there.
* `visualc/VS2010/*.vcxproj`: to be regenerated.
Regenerate files:
```
scripts/generate_visualc_files.pl
git add visualc/VS2010/*.vcxproj
scripts/generate_errors.pl
git add library/error.c
scripts/generate_features.pl
git add library/version_features.c
scripts/generate_query_config.pl
git add programs/test/query_config.c
```
Rejected changes in non-conflicting files:
* `CMakeLists.txt`: discard their addition which has already been side-ported.
* `doxygen/mbedtls.doxyfile`: keep the version number change. Discard the changes related to `../crypto` paths.
Keep the following changes after examination:
* `.travis.yml`: all of their changes are relevant.
* `include/mbedtls/error.h`: do keep their changes. Even though Crypto doesn't use TLS errors, it must not encroach on TLS's allocated numbers.
* `tests/scripts/check-test-cases.py`: keep the code dealing with `ssl-opt.sh`. It works correctly when the file is not present.
Using 4096 bytes of stack for the temporary buffer used for holding a
throw-away DER-formatted CSR limits the portability of generating
certificate signing requests to only devices with lots of stack space.
To increase portability, use the mbedtls_pem_write_buffer() in-place
capability instead, using the same buffer for input and output. This
works since the DER encoding for some given data is always smaller than
that same data PEM-encoded.
PEM format is desirable to use even on stack-constrained devices as the
format is easy to work with (for example, copy-pasting from a tiny
device's serial console output, for CSRs generated on tiny devices
without the private key leaving said tiny device).
mbedtls_pk_sign does not take the size of its output buffer as a
parameter. We guarantee that MBEDTLS_PK_SIGNATURE_MAX_SIZE is enough.
For RSA and ECDSA signatures made in software, this is ensured by the
way MBEDTLS_PK_SIGNATURE_MAX_SIZE is defined at compile time. For
signatures made through RSA-alt and PSA, this is not guaranteed
robustly at compile time, but we can test it at runtime, so do that.
This issue has been reported by Tuba Yavuz, Farhaan Fowze, Ken (Yihang) Bai,
Grant Hernandez, and Kevin Butler (University of Florida) and
Dave Tian (Purdue University).
In AES encrypt and decrypt some variables were left on the stack. The value
of these variables can be used to recover the last round key. To follow best
practice and to limit the impact of buffer overread vulnerabilities (like
Heartbleed) we need to zeroize them before exiting the function.
When writing a private EC key, use a constant size for the private
value, as specified in RFC 5915. Previously, the value was written
as an ASN.1 INTEGER, which caused the size of the key to leak
about 1 bit of information on average, and could cause the value to be
1 byte too large for the output buffer.
In the case of *ret we might need to preserve a 0 value throughout the
loop and therefore we need an extra condition to protect it from being
overwritten.
The value of done is always 1 after *ret has been set and does not need
to be protected from overwriting. Therefore in this case the extra
condition can be removed.
The code relied on the assumptions that CHAR_BIT is 8 and that unsigned
does not have padding bits.
In the Bignum module we already assume that the sign of an MPI is either
-1 or 1. Using this, we eliminate the above mentioned dependency.
The signature of mbedtls_mpi_cmp_mpi_ct() meant to support using it in
place of mbedtls_mpi_cmp_mpi(). This meant full comparison functionality
and a signed result.
To make the function more universal and friendly to constant time
coding, we change the result type to unsigned. Theoretically, we could
encode the comparison result in an unsigned value, but it would be less
intuitive.
Therefore we won't be able to represent the result as unsigned anymore
and the functionality will be constrained to checking if the first
operand is less than the second. This is sufficient to support the
current use case and to check any relationship between MPIs.
The only drawback is that we need to call the function twice when
checking for equality, but this can be optimised later if an when it is
needed.
Multiplication is known to have measurable timing variations based on
the operands. For example it typically is much faster if one of the
operands is zero. Remove them from constant time code.
1. variable name accoriding to the Mbed TLS coding style;
2. add a comment explaining safety of the optimization;
3. safer T2 initialization and memory zeroing on the function exit;
Record checking fails if mbedtls_ssl_check_record() is called with
external buffer. Received record sequence number is available in the
incoming record but it is not available in the ssl contexts `in_ctr`-
variable that is used when decoding the sequence number.
To fix the problem, temporarily update ssl context `in_ctr` to
point to the received record header and restore value later.
We want to explicitly disallow creating new transactions when a
transaction is already in progress. However, we were incorrectly
checking for the existence of the injected entropy file before
continuing with creating a transaction. This meant we could have a
transaction already in progress and would be able to still create a new
transaction. It also meant we couldn't start a new transaction if any
entropy had been injected. Check the transaction file instead of the
injected entropy file in order to prevent multiple concurrent
transactions.
Change the default entropy nonce length to be nonzero in some cases.
Specifically, the default nonce length is now set in such a way that
the entropy input during the initial seeding always contains enough
entropy to achieve the maximum possible security strength per
NIST SP 800-90A given the key size and entropy length.
If MBEDTLS_CTR_DRBG_ENTROPY_LEN is kept to its default value,
mbedtls_ctr_drbg_seed() now grabs extra entropy for a nonce if
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is disabled and either
MBEDTLS_ENTROPY_FORCE_SHA256 is enabled or MBEDTLS_SHA512_C is
disabled. If MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is enabled, or if
the entropy module uses SHA-512, then the default value of
MBEDTLS_CTR_DRBG_ENTROPY_LEN does not require a second call to the
entropy function to achieve the maximum security strength.
This choice of default nonce size guarantees NIST compliance with the
maximum security strength while keeping backward compatibility and
performance high: in configurations that do not require grabbing more
entropy, the code will not grab more entropy than before.
Add a new function mbedtls_ctr_drbg_set_nonce_len() which configures
the DRBG instance to call f_entropy a second time during the initial
seeding to grab a nonce.
The default nonce length is 0, so there is no behavior change unless
the user calls the new function.
Add a new function mbedtls_ctr_drbg_set_nonce_len() which configures
the DRBG instance to call f_entropy a second time during the initial
seeding to grab a nonce.
The default nonce length is 0, so there is no behavior change unless
the user calls the new function.
The blinding applied to the scalar before modular inversion is
inadequate. Bignum is not constant time/constant trace, side channel
attacks can retrieve the blinded value, factor it (it is smaller than
RSA keys and not guaranteed to have only large prime factors). Then the
key can be recovered by brute force.
Reducing the blinded value makes factoring useless because the adversary
can only recover pk*t+z*N instead of pk*t.
mbedtls_ctr_drbg_seed() always set the entropy length to the default,
so a call to mbedtls_ctr_drbg_set_entropy_len() before seed() had no
effect. Change this to the more intuitive behavior that
set_entropy_len() sets the entropy length and seed() respects that and
only uses the default entropy length if there was no call to
set_entropy_len().
This removes the need for the test-only function
mbedtls_ctr_drbg_seed_entropy_len(). Just call
mbedtls_ctr_drbg_set_entropy_len() followed by
mbedtls_ctr_drbg_seed(), it works now.
Move the definitions of mbedtls_ctr_drbg_seed_entropy_len() and
mbedtls_ctr_drbg_seed() to after they are used. This makes the code
easier to read and to maintain.
mbedtls_hmac_drbg_seed() always set the entropy length to the default,
so a call to mbedtls_hmac_drbg_set_entropy_len() before seed() had no
effect. Change this to the more intuitive behavior that
set_entropy_len() sets the entropy length and seed() respects that and
only uses the default entropy length if there was no call to
set_entropy_len().
Fix a signed int overflow in mbedtls_asn1_get_int() for numbers
between INT_MAX+1 and UINT_MAX (typically 0x80000000..0xffffffff).
This was undefined behavior which in practice would typically have
resulted in an incorrect value, but which may plausibly also have
caused the postcondition (*p == initial<*p> + len) to be violated.
Credit to OSS-Fuzz.
mbedtls_entropy_func returns up to MBEDTLS_ENTROPY_BLOCK_SIZE bytes.
This is the output of a hash function and does not indicate how many
bytes of entropy went into the hash computation.
Enforce that mbedtls_entropy_func gathers a total of
MBEDTLS_ENTROPY_BLOCK_SIZE bytes or more from strong sources. Weak
sources don't count for this calculation. This is complementary to the
per-source threshold mechanism.
In particular, we define system sources with a threshold of 32. But
when using SHA-512 for the entropy accumulator,
MBEDTLS_ENTROPY_BLOCK_SIZE = 64, so users can expect 64 bytes' worth
of entropy. Before, you only got 64 bytes of entropy if there were two
sources. Now you get 64 bytes of entropy even with a single source
with a threshold of 32.
This caused problems when running multiple jobs at once, since
there was no target matching libmbedcrypto.so with the path
prefix. It only worked if it was built first, since such file was found.
Additionally, building of libmbedcrypto.so now waits for the static .a version.
Previously, recipes for both libmbedcrypto.a and libmbedcrypto.so could run
independently when running parallel jobs, which resulted in the .o files
being built twice. It could sometimes be a problem, since linking would start
when building one of the object files was still in progress (the previous one
existed). This in turn resulted in reading (and trying to link) a malformed file.
The "|" character is followed by "order-only-prerequisites", and in this case,
makes linking of the shared version of the library wait for the .a file.
Since it's guaranteed to be always built in the "all" target, it's fine to do that.
All of the .o files are only built once thanks to this change.
Add a parameter to the p_validate_slot_number method to allow the
driver to modify the persistent data.
With the current structure of the core, the persistent data is already
updated. All it took was adding a way to modify it.
When registering a key in a secure element, go through the transaction
mechanism. This makes the code simpler, at the expense of a few extra
storage operations. Given that registering a key is typically very
rare over the lifetime of a device, this is an acceptable loss.
Drivers must now have a p_validate_slot_number method, otherwise
registering a key is not possible. This reduces the risk that due to a
mistake during the integration of a device, an application might claim
a slot in a way that is not supported by the driver.
In ssl_parse_hello_verify_request, we read 3 bytes (version and cookie
length) without checking that there are that many bytes left in
ssl->in_msg. This could potentially read from memory outside of the
ssl->receive buffer (which would be a remotely exploitable
crash).
In ssl_parse_hello_verify_request, we print cookie_len bytes without
checking that there are that many bytes left in ssl->in_msg. This
could potentially log data outside the received message (not a big
deal) and could potentially read from memory outside of the receive
buffer (which would be a remotely exploitable crash).
If none of the inputs to a key derivation is a
PSA_KEY_DERIVATION_INPUT_SECRET passed with
psa_key_derivation_input_key(), forbid
psa_key_derivation_output_key(). It usually doesn't make sense to
derive a key object if the secret isn't itself a proper key.
Allow a direct input as the SECRET input step in a key derivation, in
addition to allowing DERIVE keys. This makes it easier for
applications to run a key derivation where the "secret" input is
obtained from somewhere else. This makes it possible for the "secret"
input to be empty (keys cannot be empty), which some protocols do (for
example the IV derivation in EAP-TLS).
Conversely, allow a RAW_DATA key as the INFO/LABEL/SALT/SEED input to a key
derivation, in addition to allowing direct inputs. This doesn't
improve security, but removes a step when a personalization parameter
is stored in the key store, and allows this personalization parameter
to remain opaque.
Add test cases that explore step/key-type-and-keyhood combinations.
In TLS, the master secret is always a key. But EAP-TLS uses the TLS
PRF to derive an IV with an empty string for the "secret" input. The
code always stored the secret into a key slot before calling the TLS
PRF, but this doesn't work when the secret is empty, since PSA Crypto
no longer supports empty keys. Add a special case for an empty secret.
The signature must have exactly the same length as the key, it can't
be longer. Fix#258
If the signature doesn't have the correct size, that's an invalid
signature, not a problem with an output buffer size. Fix the error code.
Add test cases.
In psa_asymmetric_sign, immediately reject an empty signature buffer.
This can never be right.
Add test cases (one RSA and one ECDSA).
Change the SE HAL mock tests not to use an empty signature buffer.
Zero-length keys are rejected at creation time, so we don't need any
special handling internally.
When exporting a key, we do need to take care of the case where the
output buffer is empty, but this is easy: an empty output buffer is
never valid.
Document how mbedtls_asn1_store_named_data allocates val.p in the new
or modified entry.
Change the behavior to be more regular, always setting the new length
to val_len. This does not affect the previous documented behavior
since this aspect was not documented. This does not affect current
usage in Mbed TLS's X.509 module where calls with the same OID always
use the same size for the associated value.
At the end of `psa_hmac_setup_internal()`, the ipad is cleared.
However, the size that was given to clear was `key_len` which is larger
than the size of `ipad`.
* crypto/development: (77 commits)
all.sh: disable MEMORY_BUFFER_ALLOC in cmake asan build
Unify gcc and clang cmake flags to test with UBsan
Add an input check in psa_its_set
Remove storage errors from psa_generate_random
Update getting_started.md
Update based on Jaeden's comments.
Update getting_started.md
Fix return code warnings
Update getting_started.md
Fix warnings
Add PSA_ERROR_STORAGE_FAILURE to psa_cipher_generate_iv
Remove errorneous insert
Add STORAGE_FAILURE everywhere + add missing codes
Add storage failure to psa_mac_verify_finish
Add storage failure to psa_mac_sign_finish
Add PSA_ERROR_STORAGE_FAILURE to psa_aead_*_setup functions
Added PSA_ERROR_BAD_STATE to functions with operations
Added extra bad state case to psa_hash_setup
Add missing return codes to psa_generate_key
Add PSA_ERROR_BUFFER_TOO_SMALL to psa_mac_compute
...
We were still reusing the internal HMAC-DRBG of the deterministic ECDSA
for blinding. This meant that with cryptographically low likelyhood the
result was not the same signature as the one the deterministic ECDSA
algorithm has to produce (however it is still a valid ECDSA signature).
To correct this we seed a second HMAC-DRBG with the same seed to restore
correct behavior. We also apply a label to avoid reusing the bits of the
ephemeral key for a different purpose and reduce the chance that they
leak.
This workaround can't be implemented in the restartable case without
penalising the case where external RNG is available or completely
defeating the purpose of the restartable feature, therefore in this case
the small chance of incorrect behavior remains.
The current interface does not allow passing an RNG, which is needed for
blinding. Using the scheme's internal HMAC-DRBG results the same
blinding values for the same key and message, diminishing the
effectiveness of the countermeasure. A new function
`mbedtls_ecdsa_det_ext` is available to address this problem.
`mbedtls_ecdsa_sign_det` reuses the internal HMAC-DRBG instance to
implement blinding. The advantage of this is that the algorithm is
deterministic too, not just the resulting signature. The drawback is
that the blinding is always the same for the same key and message.
This diminishes the efficiency of blinding and leaks information about
the private key.
A function that takes external randomness fixes this weakness.
* crypto/development: (863 commits)
crypto_platform: Fix typo
des: Reduce number of self-test iterations
Fix -O0 build for Aarch64 bignum multiplication.
Make GNUC-compatible compilers use the right mbedtls_t_udbl again on Aarch64 builds.
Add optimized bignum multiplication for Aarch64.
Enable 64-bit limbs for all Aarch64 builds.
HMAC DRBG: Split entropy-gathering requests to reduce request sizes
psa: Use application key ID where necessary
psa: Adapt set_key_id() for when owner is included
psa: Add PSA_KEY_ID_INIT
psa: Don't duplicate policy initializer
crypto_extra: Use const seed for entropy injection
getting_started: Update for PSA Crypto API 1.0b3
Editorial fixes.
Cross reference 'key handles' from INVALID_HANDLE
Update documentation for psa_destroy_key
Update documentation for psa_close_key
Update psa_open_key documentation
Remove duplicated information in psa_open_key
Initialize key bits to max size + 1 in psa_import_key
...
* origin/development:
Fix uninitialized variable in x509_crt
Add a ChangeLog entry for mbedtls_net_close()
Added mbedtls_net_close and use it in ssl_fork_server to correctly disassociate the client socket from the parent process and the server socket from the child process.
Add ChangeLog entry
fix memory leak in mpi_miller_rabin()
* origin/pr/2803:
Add a ChangeLog entry for mbedtls_net_close()
Added mbedtls_net_close and use it in ssl_fork_server to correctly disassociate the client socket from the parent process and the server socket from the child process.
* origin/development: (42 commits)
Handle deleting non-existant files on Windows
Update submodule
Use 3rdparty headers from the submodule
Add Everest components to all.sh
3rdparty: Add config checks for Everest
Fix macros in benchmark.c
Update generated files
3rdparty: Fix inclusion order of CMakeLists.txt
Fix trailing whitespace
ECDH: Fix inclusion of platform.h for proper use of MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED
ECDH: Fix use of ECDH API in full handshake benchmark
ECDH: Removed unnecessary calls to mbedtls_ecp_group_load in ECDH benchmark
ECDH: Fix Everest x25519 make_public
Fix file permissions
3rdparty: Rename THIRDPARTY_OBJECTS
3rdparty: Update description of MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED
3rdparty: Fix Makefile coding conventions
ECDSA: Refactor return value checks for mbedtls_ecdsa_can_do
Add a changelog entry for Everest ECDH (X25519)
Document that curve lists can include partially-supported curves
...
Manually edit ChangeLog to ensure correct placement of ChangeLog notes.
* origin/pr/2799: (42 commits)
Handle deleting non-existant files on Windows
Update submodule
Use 3rdparty headers from the submodule
Add Everest components to all.sh
3rdparty: Add config checks for Everest
Fix macros in benchmark.c
Update generated files
3rdparty: Fix inclusion order of CMakeLists.txt
Fix trailing whitespace
ECDH: Fix inclusion of platform.h for proper use of MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED
ECDH: Fix use of ECDH API in full handshake benchmark
ECDH: Removed unnecessary calls to mbedtls_ecp_group_load in ECDH benchmark
ECDH: Fix Everest x25519 make_public
Fix file permissions
3rdparty: Rename THIRDPARTY_OBJECTS
3rdparty: Update description of MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED
3rdparty: Fix Makefile coding conventions
ECDSA: Refactor return value checks for mbedtls_ecdsa_can_do
Add a changelog entry for Everest ECDH (X25519)
Document that curve lists can include partially-supported curves
...
If we try to delete a non-existant file using del on Windows, as
can happen when running make clean, del will throw an error. Make
the Makefiles more robust by only deleting files if they exist.
