mirror of
https://github.com/yuzu-emu/mbedtls.git
synced 2024-12-30 21:15:27 +00:00
83 lines
2.8 KiB
Markdown
83 lines
2.8 KiB
Markdown
# mbed TLS Selftest Example
|
|
|
|
This application runs the various selftest functions of individual mbed TLS components. It serves as a basic sanity check to verify operation of mbed TLS on your platform. In the future, a wider portion of the mbed TLS test suite will become part of this example application.
|
|
|
|
## Pre-requisites
|
|
|
|
To build and run this example you must have:
|
|
|
|
* A computer with the following software installed:
|
|
* [CMake](http://www.cmake.org/download/).
|
|
* [yotta](https://github.com/ARMmbed/yotta). Please note that **yotta has its own set of dependencies**, listed in the [installation instructions](http://armmbed.github.io/yotta/#installing-on-windows).
|
|
* [Python](https://www.python.org/downloads/).
|
|
* [The ARM GCC toolchain](https://launchpad.net/gcc-arm-embedded).
|
|
* A serial terminal emulator (Like screen, pySerial and cu).
|
|
* An [FRDM-K64F](http://developer.mbed.org/platforms/FRDM-K64F/) development board, or another board supported by mbed OS (in which case you'll have to substitute frdm-k64f-gcc with the appropriate target in the instructions below).
|
|
* A micro-USB cable.
|
|
* If your OS is Windows, please follow the installation instructions [for the serial port driver](https://developer.mbed.org/handbook/Windows-serial-configuration).
|
|
|
|
## Getting started
|
|
|
|
1. Connect the FRDM-K64F to the computer with the micro-USB cable, being careful to use the "OpenSDA" connector on the target board.
|
|
|
|
2. Navigate to the mbedtls directory supplied with your release and open a terminal.
|
|
|
|
3. Set the yotta target:
|
|
|
|
```
|
|
yotta target frdm-k64f-gcc
|
|
```
|
|
|
|
4. Build mbedtls and the examples. This may take a long time if this is your first compilation:
|
|
|
|
```
|
|
$ yotta build
|
|
```
|
|
|
|
5. Copy `build/frdm-k64f-gcc/test/mbedtls-test-example-selftest.bin` to your mbed board and wait until the LED next to the USB port stops blinking.
|
|
|
|
6. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F.
|
|
|
|
Use the following settings:
|
|
|
|
* 115200 baud (not 9600).
|
|
* 8N1.
|
|
* No flow control.
|
|
|
|
7. Press the Reset button on the board.
|
|
|
|
8. The output in the terminal window should look like:
|
|
|
|
```
|
|
{{timeout;40}}
|
|
{{host_test_name;default}}
|
|
{{description;mbed TLS selftest program}}
|
|
{{test_id;MBEDTLS_SELFTEST}}
|
|
{{start}}
|
|
|
|
SHA-224 test #1: passed
|
|
SHA-224 test #2: passed
|
|
SHA-224 test #3: passed
|
|
SHA-256 test #1: passed
|
|
SHA-256 test #2: passed
|
|
SHA-256 test #3: passed
|
|
|
|
[ ... several lines omitted ... ]
|
|
|
|
CTR_DRBG (PR = TRUE) : passed
|
|
CTR_DRBG (PR = FALSE): passed
|
|
|
|
HMAC_DRBG (PR = True) : passed
|
|
HMAC_DRBG (PR = False) : passed
|
|
|
|
ECP test #1 (constant op_count, base point G): passed
|
|
ECP test #2 (constant op_count, other point): passed
|
|
|
|
ENTROPY test: passed
|
|
|
|
[ All tests passed ]
|
|
|
|
{{success}}
|
|
{{end}}
|
|
```
|