mbedtls/yotta/data/example-benchmark/README.md
2018-05-15 09:21:57 +01:00

101 lines
4.7 KiB
Markdown

# mbed TLS Benchmark Example
This application benchmarks the various cryptographic primitives offered by mbed TLS.
## Pre-requisites
To build and run this example you must have:
* A computer with the following software installed:
* [CMake](http://www.cmake.org/download/).
* [yotta](https://github.com/ARMmbed/yotta). Please note that **yotta has its own set of dependencies**, listed in the [installation instructions](http://armmbed.github.io/yotta/#installing-on-windows).
* [Python](https://www.python.org/downloads/).
* [The ARM GCC toolchain](https://launchpad.net/gcc-arm-embedded).
* A serial terminal emulator (Like screen, pySerial and cu).
* An [FRDM-K64F](http://developer.mbed.org/platforms/FRDM-K64F/) development board, or another board supported by mbed OS (in which case you'll have to substitute frdm-k64f-gcc with the appropriate target in the instructions below).
* A micro-USB cable.
* If your OS is Windows, please follow the installation instructions [for the serial port driver](https://developer.mbed.org/handbook/Windows-serial-configuration).
## Getting started
1. Connect the FRDM-K64F to the computer with the micro-USB cable, being careful to use the "OpenSDA" connector on the target board.
2. Navigate to the mbedtls directory supplied with your release and open a terminal.
3. Set the yotta target:
```
yotta target frdm-k64f-gcc
```
4. Build mbedtls and the examples. This may take a long time if this is your first compilation:
```
$ yotta build
```
5. Copy `build/frdm-k64f-gcc/test/mbedtls-test-example-benchmark.bin` to your mbed board and wait until the LED next to the USB port stops blinking.
6. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F.
Use the following settings:
* 115200 baud (not 9600).
* 8N1.
* No flow control.
7. Press the Reset button on the board.
8. The output in the terminal window should look like:
```
{{timeout;150}}
{{host_test_name;default}}
{{description;mbed TLS benchmark program}}
{{test_id;MBEDTLS_BENCHMARK}}
{{start}}
SHA-1 : 3644 KiB/s, 32 cycles/byte
SHA-256 : 1957 KiB/s, 59 cycles/byte
SHA-512 : 587 KiB/s, 200 cycles/byte
AES-CBC-128 : 1359 KiB/s, 86 cycles/byte
AES-CBC-192 : 1183 KiB/s, 99 cycles/byte
AES-CBC-256 : 1048 KiB/s, 111 cycles/byte
AES-GCM-128 : 421 KiB/s, 279 cycles/byte
AES-GCM-192 : 403 KiB/s, 292 cycles/byte
AES-GCM-256 : 385 KiB/s, 305 cycles/byte
AES-CCM-128 : 542 KiB/s, 216 cycles/byte
AES-CCM-192 : 484 KiB/s, 242 cycles/byte
AES-CCM-256 : 437 KiB/s, 268 cycles/byte
CTR_DRBG (NOPR) : 1002 KiB/s, 117 cycles/byte
CTR_DRBG (PR) : 705 KiB/s, 166 cycles/byte
HMAC_DRBG SHA-1 (NOPR) : 228 KiB/s, 517 cycles/byte
HMAC_DRBG SHA-1 (PR) : 210 KiB/s, 561 cycles/byte
HMAC_DRBG SHA-256 (NOPR) : 212 KiB/s, 557 cycles/byte
HMAC_DRBG SHA-256 (PR) : 185 KiB/s, 637 cycles/byte
RSA-2048 : 41 ms/ public
RSA-2048 : 1349 ms/private
RSA-4096 : 134 ms/ public
RSA-4096 : 7149 ms/private
ECDSA-secp384r1 : 640 ms/sign
ECDSA-secp256r1 : 387 ms/sign
ECDSA-secp384r1 : 1233 ms/verify
ECDSA-secp256r1 : 751 ms/verify
ECDHE-secp384r1 : 1191 ms/handshake
ECDHE-secp256r1 : 730 ms/handshake
ECDHE-Curve25519 : 611 ms/handshake
ECDH-secp384r1 : 584 ms/handshake
ECDH-secp256r1 : 365 ms/handshake
ECDH-Curve25519 : 303 ms/handshake
{{success}}
{{end}}
```
Any performance data generated by this example application are indicative only of the performance of the mbed TLS module on the platform it's executed on.
Differences in the integration of mbed TLS into the platform, such as whether all available hardware accelerators have been used or not, can lead to significant differences in performance, and so results from the program are not intended to be used to meaningfully compare platforms.
The figures may also slightly change from execution to execution due to variations in the timing functions.