yuzu/unicorn
1
0
Fork 0
mirror of https://github.com/yuzu-emu/unicorn.git synced 2024-12-24 13:45:31 +00:00
Code Issues Packages Projects Releases Wiki Activity
unicorn/qemu/target/mips/mips-defs.h

107 lines
3.6 KiB
C
Raw Normal View History

Clean up ill-advised or unusual header guards Cleaned up with scripts/clean-header-guards.pl. Backports commit 2a6a4076e117113ebec97b1821071afccfdfbc96 from qemu
2018-02-25 09:22:42 +00:00
#ifndef QEMU_MIPS_DEFS_H
#define QEMU_MIPS_DEFS_H
import
2015-08-21 07:04:50 +00:00
/* If we want to use host float regs... */
//#define USE_HOST_FLOAT_REGS
/* Real pages are variable size... */
#define TARGET_PAGE_BITS 12
#define MIPS_TLB_MAX 128
#if defined(TARGET_MIPS64)
#define TARGET_LONG_BITS 64
target-mips: add CP0.PageGrain.ELPA support CP0.PageGrain.ELPA enables support for large physical addresses. This field is encoded as follows: 0: Large physical address support is disabled. 1: Large physical address support is enabled. If this bit is a 1, the following changes occur to coprocessor 0 registers: - The PFNX field of the EntryLo0 and EntryLo1 registers is writable and concatenated with the PFN field to form the full page frame number. - Access to optional COP0 registers with PA extension, LLAddr, TagLo is defined. P5600 can operate in 32-bit or 40-bit Physical Address Mode. Therefore if XPA is disabled (CP0.PageGrain.ELPA = 0) then assume 32-bit Address Mode. In MIPS64 assume 36 as default PABITS (when CP0.PageGrain.ELPA = 0). env->PABITS value is constant and indicates maximum PABITS available on a core, whereas env->PAMask is calculated from env->PABITS and is also affected by CP0.PageGrain.ELPA. Backports commit e117f52636d04502fab28bd3abe93347c29f39a5 from qemu
2018-02-13 18:55:30 +00:00
#define TARGET_PHYS_ADDR_SPACE_BITS 48
target-mips: fix MIPS64R6-generic configuration Fix core configuration for MIPS64R6-generic to make it as close as I6400. I6400 core has 48-bit of Virtual Address available (SEGBITS). MIPS SIMD Architecture is available. Rearrange order of bits to match the specification. Backports commit 4dc89b782095d7a0b919fafd7b1322b3cb1279f1 from qemu
2018-02-14 21:55:21 +00:00
#define TARGET_VIRT_ADDR_SPACE_BITS 48
import
2015-08-21 07:04:50 +00:00
#else
#define TARGET_LONG_BITS 32
target-mips: add CP0.PageGrain.ELPA support CP0.PageGrain.ELPA enables support for large physical addresses. This field is encoded as follows: 0: Large physical address support is disabled. 1: Large physical address support is enabled. If this bit is a 1, the following changes occur to coprocessor 0 registers: - The PFNX field of the EntryLo0 and EntryLo1 registers is writable and concatenated with the PFN field to form the full page frame number. - Access to optional COP0 registers with PA extension, LLAddr, TagLo is defined. P5600 can operate in 32-bit or 40-bit Physical Address Mode. Therefore if XPA is disabled (CP0.PageGrain.ELPA = 0) then assume 32-bit Address Mode. In MIPS64 assume 36 as default PABITS (when CP0.PageGrain.ELPA = 0). env->PABITS value is constant and indicates maximum PABITS available on a core, whereas env->PAMask is calculated from env->PABITS and is also affected by CP0.PageGrain.ELPA. Backports commit e117f52636d04502fab28bd3abe93347c29f39a5 from qemu
2018-02-13 18:55:30 +00:00
#define TARGET_PHYS_ADDR_SPACE_BITS 40
import
2015-08-21 07:04:50 +00:00
#define TARGET_VIRT_ADDR_SPACE_BITS 32
#endif
target/mips: Reorganize bit definitions for insn_flags (ISAs/ASEs flags) Distribute bits 56-63 vendor-specific ASEs as follows: - bits 0-31 MIPS base instruction sets - bits 32-47 MIPS ASEs - bits 48-55 vendor-specific base instruction sets - bits 56-63 vendor-specific ASEs Backports commit 45ebdd24c3de158890ce390df39855a891e80701 from qemu
2018-10-23 17:18:09 +00:00
/*
* bit definitions for insn_flags (ISAs/ASEs flags)
* ------------------------------------------------
*/
/*
* bits 0-31: MIPS base instruction sets
*/
#define ISA_MIPS1 0x0000000000000001ULL
#define ISA_MIPS2 0x0000000000000002ULL
#define ISA_MIPS3 0x0000000000000004ULL
#define ISA_MIPS4 0x0000000000000008ULL
#define ISA_MIPS5 0x0000000000000010ULL
#define ISA_MIPS32 0x0000000000000020ULL
#define ISA_MIPS32R2 0x0000000000000040ULL
#define ISA_MIPS64 0x0000000000000080ULL
#define ISA_MIPS64R2 0x0000000000000100ULL
#define ISA_MIPS32R3 0x0000000000000200ULL
#define ISA_MIPS64R3 0x0000000000000400ULL
#define ISA_MIPS32R5 0x0000000000000800ULL
#define ISA_MIPS64R5 0x0000000000001000ULL
#define ISA_MIPS32R6 0x0000000000002000ULL
#define ISA_MIPS64R6 0x0000000000004000ULL
#define ISA_NANOMIPS32 0x0000000000008000ULL
/*
* bits 32-47: MIPS ASEs
*/
#define ASE_MIPS16 0x0000000100000000ULL
#define ASE_MIPS3D 0x0000000200000000ULL
#define ASE_MDMX 0x0000000400000000ULL
#define ASE_DSP 0x0000000800000000ULL
#define ASE_DSPR2 0x0000001000000000ULL
target/mips: Add bit definitions for DSP R3 ASE Add DSP R3 ASE related bit definition for insn_flags and hflags. Backports commit 6208f09441dcf8d142ff0e1624ef12da298776a4 from qemu
2018-10-23 17:18:57 +00:00
#define ASE_DSPR3 0x0000002000000000ULL
target/mips: Reorganize bit definitions for insn_flags (ISAs/ASEs flags) Distribute bits 56-63 vendor-specific ASEs as follows: - bits 0-31 MIPS base instruction sets - bits 32-47 MIPS ASEs - bits 48-55 vendor-specific base instruction sets - bits 56-63 vendor-specific ASEs Backports commit 45ebdd24c3de158890ce390df39855a891e80701 from qemu
2018-10-23 17:18:09 +00:00
#define ASE_MT 0x0000004000000000ULL
#define ASE_SMARTMIPS 0x0000008000000000ULL
#define ASE_MICROMIPS 0x0000010000000000ULL
#define ASE_MSA 0x0000020000000000ULL
/*
* bits 48-55: vendor-specific base instruction sets
*/
#define INSN_LOONGSON2E 0x0001000000000000ULL
#define INSN_LOONGSON2F 0x0002000000000000ULL
#define INSN_VR54XX 0x0004000000000000ULL
/*
* bits 56-63: vendor-specific ASEs
*/
import
2015-08-21 07:04:50 +00:00
/* MIPS CPU defines. */
#define CPU_MIPS1 (ISA_MIPS1)
#define CPU_MIPS2 (CPU_MIPS1 | ISA_MIPS2)
#define CPU_MIPS3 (CPU_MIPS2 | ISA_MIPS3)
#define CPU_MIPS4 (CPU_MIPS3 | ISA_MIPS4)
#define CPU_VR54XX (CPU_MIPS4 | INSN_VR54XX)
#define CPU_LOONGSON2E (CPU_MIPS3 | INSN_LOONGSON2E)
#define CPU_LOONGSON2F (CPU_MIPS3 | INSN_LOONGSON2F)
#define CPU_MIPS5 (CPU_MIPS4 | ISA_MIPS5)
/* MIPS Technologies "Release 1" */
#define CPU_MIPS32 (CPU_MIPS2 | ISA_MIPS32)
#define CPU_MIPS64 (CPU_MIPS5 | CPU_MIPS32 | ISA_MIPS64)
/* MIPS Technologies "Release 2" */
#define CPU_MIPS32R2 (CPU_MIPS32 | ISA_MIPS32R2)
#define CPU_MIPS64R2 (CPU_MIPS64 | CPU_MIPS32R2 | ISA_MIPS64R2)
/* MIPS Technologies "Release 3" */
#define CPU_MIPS32R3 (CPU_MIPS32R2 | ISA_MIPS32R3)
#define CPU_MIPS64R3 (CPU_MIPS64R2 | CPU_MIPS32R3 | ISA_MIPS64R3)
/* MIPS Technologies "Release 5" */
#define CPU_MIPS32R5 (CPU_MIPS32R3 | ISA_MIPS32R5)
#define CPU_MIPS64R5 (CPU_MIPS64R3 | CPU_MIPS32R5 | ISA_MIPS64R5)
/* MIPS Technologies "Release 6" */
#define CPU_MIPS32R6 (CPU_MIPS32R5 | ISA_MIPS32R6)
#define CPU_MIPS64R6 (CPU_MIPS64R5 | CPU_MIPS32R6 | ISA_MIPS64R6)
target/mips: Add preprocessor constants for nanoMIPS Add ISA_NANOMIPS32 and CPU_NANOMIPS32 preprocessor constants. Backports commit fa7c0c9f5bc12970858a89f46dd5012c01545b80 from qemu
2018-08-27 08:11:09 +00:00
/* Wave Computing: "nanoMIPS" */
#define CPU_NANOMIPS32 (CPU_MIPS32R6 | ISA_NANOMIPS32)
import
2015-08-21 07:04:50 +00:00
/* Strictly follow the architecture standard:
- Disallow "special" instruction handling for PMON/SPIM.
Note that we still maintain Count/Compare to match the host clock. */
//#define MIPS_STRICT_STANDARD 1
Clean up ill-advised or unusual header guards Cleaned up with scripts/clean-header-guards.pl. Backports commit 2a6a4076e117113ebec97b1821071afccfdfbc96 from qemu
2018-02-25 09:22:42 +00:00
#endif /* QEMU_MIPS_DEFS_H */
Reference in a new issue Copy permalink