Checking that a given QAPISchemaObjectTypeVariant.name is a
member of the corresponding QAPISchemaEnumType of the owning
QAPISchemaObjectTypeVariants.tag_member ensures that there are
no collisions in the generated C union for those tag values
(since the enum itself should have no collisions).
However, ever since its introduction in f51d8c3d, this was the
only additional action of of Variant.check(), beyond calling
the superclass Member.check(). This forces a difference in
.check() signatures, just to pass the enum type down.
Simplify things by instead doing the tag name check as part of
Variants.check(), at which point we can rely on inheritance
instead of overriding Variant.check().
Backports commit 10565ca92a8d3f8a34559329acfbdb25a791b594 from qemu
Consolidate two common sequences of clash detection into a
new QAPISchemaObjectType.check_clash() helper method.
No change to generated code.
Backports commit c2183d2e62b6d9d66f80bc0bcf4fc7ec3c5d76d4 from qemu
Right now, our ad hoc parser ensures that we cannot have a
flat union that introduces any members that would clash with
non-variant members inherited from the union's base type (see
flat-union-clash-member.json). We want QAPISchemaObjectType.check()
to make the same check, so we can later reduce some of the ad
hoc checks.
We already have a map 'seen' of all non-variant members. We
still need to check for collisions between each variant type's
members and the non-variant ones.
To know the variant type's members, we need to call
variant.type.check(). This also detects when a type contains
itself in a variant, exactly like the existing base.check()
detects when a type contains itself as a base. (Except that
we currently forbid anything but a struct as the type of a
variant, so we can't actually trigger this type of loop yet.)
Slight complication: an alternate's variant can have arbitrary
type, but only an object type's check() may be called outside
QAPISchema.check(). We could either skip the call for variants
of alternates, or skip it for non-object types. For now, do
the latter, because it's easier.
Then we call each variant member's check_clash() with the
appropriate 'seen' map. Since members of different variants
can't clash, we have to clone a fresh seen for each variant.
Wrap this in a new helper method
QAPISchemaObjectTypeVariants.check_clash().
Note that cloning 'seen' inside .check_clash() resembles
the one we just removed from .check() in 'qapi: Drop
obsolete tag value collision assertions'; the difference here is
that we are now checking for clashes among the qapi members of
the variant type, rather than for a single clash with the variant
tag name itself.
Note that, by construction, collisions can't actually happen for
simple unions: each variant's type is a wrapper with a single
member 'data', which will never collide with the only non-variant
member 'type'.
For alternates, there's nothing for a variant object type's
members to clash with, and therefore no need to call the new
variants.check_clash().
No change to generated code.
Backports commit b807a1e1e3796adaf3ece2f7b69ea5ee28468ff4 from qemu
Reduce the ugly flat union / simple union conditional by doing just
the essential work here, namely setting self.tag_member.
Move the rest to callers.
Backports commit 14ff84619c6bb9b729dbf8b127c1e4c56ed8c500 from qemu
While there, stick in a TODO change key of seen from QAPI name to C
name. Can't do it right away, because it would fail the assertion for
tests/qapi-schema/args-has-clash.json.
Backports commit 577de12d22aba55f31fd68c5724411eb8592a4ca from qemu
This hunk
@@ -964,6 +965,7 @@ class QAPISchemaObjectType(QAPISchemaType):
members = []
seen = {}
for m in members:
+ assert c_name(m.name) not in seen
seen[m.name] = m
for m in self.local_members:
m.check(schema, members, seen)
is plainly broken.
Asserting the members inherited from base don't clash is somewhat
redundant, because self.base.check() just checked that. But it
doesn't hurt.
The idea to use c_name(m.name) instead of m.name for collision
checking is sound, because we need to catch clashes between the m.name
and between the c_name(m.name), and when two m.name clash, then their
c_name() also clash.
However, using c_name(m.name) instead of m.name in one of several
places doesn't work. See the very next line.
Keep the assertion, but drop the c_name() for now. A future commit
will bring it back.
Backports commit 08683353fc46b5d462199c9e8cff6f6c67f20f65 from qemu
QAPISchemaObjectTypeVariants.check() parameter members and
QAPISchemaObjectTypeVariant.check() parameter seen are no longer used,
drop them.
Backports commit cdc5fa37eda2896d2b08f9215c963256eb859d3b from qemu
QAPISchemaObjectTypeMember.check() currently does four things:
1. Compute self.type
2. Accumulate members in all_members
Only one caller cares: QAPISchemaObjectType.check() uses it to
compute self.members. The other callers pass a throw-away
accumulator.
3. Accumulate a map from names to members in seen
Only one caller cares: QAPISchemaObjectType.check() uses it to
compute its local variable seen, for self.variants.check(), which
uses it to compute self.variants.tag_member from
self.variants.tag_name. The other callers pass a throw-away
accumulator.
4. Check for collisions
This piggybacks on 3: before adding a new entry, we assert it's new.
Only one caller cares: QAPISchemaObjectType.check() uses it to
assert non-variant members don't clash.
Simplify QAPISchemaObjectType.check(): move 2.-4. to
QAPISchemaObjectType.check(), and drop parameters all_members and
seen.
Backports commit e564e2dd5963a75f32bbb90ac8181ba9dca2f1aa from qemu
Union tag values can't clash with member names in generated C anymore
since commit e4ba22b, but QAPISchemaObjectTypeVariants.check() still
asserts they don't. Drop it.
Backports commit fff5f231d5f96e8521761efcd35a12479594059a from qemu
Simplify gen_struct_fields() back to a single iteration over a
list of fields (like it was prior to commit f87ab7f9), by moving
the generated comments to gen_object(). Then, inline
gen_struct_field() into its only caller.
Backports commit 7d9586f900a9043025866f84c096b1842b0bbbf6 from qemu
These two methods are now close enough that we can finally merge
them, relying on the fact that simple unions now provide a
reasonable local_members. Change gen_struct() to gen_object()
that handles all forms of QAPISchemaObjectType, and rename and
shrink gen_union() to gen_variants() to handle the portion of
gen_object() needed when variants are present.
gen_struct_fields() now has a single caller, so it no longer
needs an optional parameter; however, I did not choose to inline
it into the caller.
No difference to generated code.
Backports commit 570cd8d1194cf68f7c9948971e52e47f20855a77 from qemu
We were previously creating all unions with an empty list for
local_members. However, it will make it easier to unify struct
and union generation if we include the generated tag member in
local_members. That way, we can have a common code pattern:
visit the base (if any), visit the local members (if any), visit
the variants (if any). The local_members of a flat union
remains empty (because the discriminator is already visited as
part of the base). Then, by visiting tag_member.check() during
AlternateType.check(), we no longer need to call it during
Variants.check().
The various front end entities now exist as follows:
struct: optional base, optional local_members, no variants
simple union: no base, one-element local_members, variants with tag_member
from local_members
flat union: base, no local_members, variants with tag_member from base
alternate: no base, no local_members, variants
With the new local members, we require a bit of finesse to
avoid assertions in the clients.
No change to generated code.
Backports commit da34a9bd999d1be13954c699bbae0295cdaa3200 from qemu
Our generated list visitors have the same problem as has been
mentioned elsewhere (see commit 2f52e20): they allocate data
even on failure. An upcoming patch will correct things to
provide saner guarantees, but first we need to expose the
behavior in the testsuite to ensure we aren't introducing any
memory usage bugs.
There are more test cases throughout the test-qmp-input-* tests
that already deal with partial allocation; a later commit will
clean up all visit_type_FOO(), without marking all of the tests
with FIXME at this time.
Backports commit dd5ee2c2d3e3a17647ddd9bfa97935b8cb5dfa40 from qemu
Rather than having all callers pass a name, type, and optional
flag, have them instead pass a QAPISchemaObjectTypeMember which
already has all that information.
No change to generated code.
Backports commit 32bc6879beea0b0cac6196cb15a71d206401e96d from qemu
Now that we have separated union tag values from colliding with
non-variant C names, by naming the union 'u', we should reserve
this name for our use. Note that we want to forbid 'u' even in
a struct with no variants, because it is possible for a future
qemu release to extend QMP in a backwards-compatible manner while
converting from a struct to a flat union. Fortunately, no
existing clients were using this member name. If we ever find
the need for QMP to have a member 'u', we could at that time
relax things, perhaps by having c_name() munge the QMP member to
'q_u'.
Note that we cannot forbid 'u' everywhere (by adding the
rejection code to check_name()), because the existing QKeyCode
enum already uses it; therefore we only reserve it as a struct
type member name.
Backports commit 5e59baf90a72cd25d38a3134edc029f4f022da74 from qemu
We have two issues with our qapi union layout:
1) Even though the QMP wire format spells the tag 'type', the
C code spells it 'kind', requiring some hacks in the generator.
2) The C struct uses an anonymous union, which places all tag
values in the same namespace as all non-variant members. This
leads to spurious collisions if a tag value matches a non-variant
member's name.
This patch is the back end for a series that converts to a
saner qapi union layout. Now that all clients have been
converted to use 'type' and 'obj->u.value', we can drop the
temporary parallel support for 'kind' and 'obj->value'.
Given a simple union qapi type:
{ 'union':'Foo', 'data': { 'a':'int', 'b':'bool' } }
this is the overall effect, when compared to the state before
this series of patches:
| struct Foo {
|- FooKind kind;
|- union { /* union tag is @kind */
|+ FooKind type;
|+ union { /* union tag is @type */
| void *data;
| int64_t a;
| bool b;
|- };
|+ } u;
| };
The testsuite still contains some examples of artificial restrictions
(see flat-union-clash-type.json, for example) that are no longer
technically necessary, now that there is no longer a collision between
enum tag values and non-variant member names; but fixing this will be
done in later patches, in part because some further changes are required
to keep QAPISchema*.check() from asserting. Also, a later patch will
add a reservation for the member name 'u' to avoid a collision between a
user's non-variant names and our internal choice of C union name.
Note, however, that we do not rename the generated enum, which
is still 'FooKind'. A further patch could generate implicit
enums as 'FooType', but while the generator already reserved
the '*Kind' namespace (commit 4dc2e69), there are already QMP
constructs with '*Type' naming, which means changing our
reservation namespace would have lots of churn to C code to
deal with a forced name change.
Backports commit e4ba22b31943ab02373359555bd7bcd66442632f from qemu
We have two issues with our qapi union layout:
1) Even though the QMP wire format spells the tag 'type', the
C code spells it 'kind', requiring some hacks in the generator.
2) The C struct uses an anonymous union, which places all tag
values in the same namespace as all non-variant members. This
leads to spurious collisions if a tag value matches a non-variant
member's name.
Make the conversion to the new layout for qapi-visit.py.
Generated code changes look like:
|@@ -4912,16 +4912,16 @@ void visit_type_MemoryDeviceInfo(Visitor
| if (!*obj) {
| goto out_obj;
| }
|- visit_type_MemoryDeviceInfoKind(v, &(*obj)->kind, "type", &err);
|+ visit_type_MemoryDeviceInfoKind(v, &(*obj)->type, "type", &err);
| if (err) {
| goto out_obj;
| }
|- if (!visit_start_union(v, !!(*obj)->data, &err) || err) {
|+ if (!visit_start_union(v, !!(*obj)->u.data, &err) || err) {
| goto out_obj;
| }
|- switch ((*obj)->kind) {
|+ switch ((*obj)->type) {
| case MEMORY_DEVICE_INFO_KIND_DIMM:
|- visit_type_PCDIMMDeviceInfo(v, &(*obj)->dimm, "data", &err);
|+ visit_type_PCDIMMDeviceInfo(v, &(*obj)->u.dimm, "data", &err);
| break;
| default:
| abort();
|@@ -4930,7 +4930,7 @@ out_obj:
| error_propagate(errp, err);
| err = NULL;
| if (*obj) {
|- visit_end_union(v, !!(*obj)->data, &err);
|+ visit_end_union(v, !!(*obj)->u.data, &err);
| }
| error_propagate(errp, err);
| err = NULL;
Backports commit 150d0564a4c626642897c748f7906260a13c14e1 from qemu
We have two issues with our qapi union layout:
1) Even though the QMP wire format spells the tag 'type', the
C code spells it 'kind', requiring some hacks in the generator.
2) The C struct uses an anonymous union, which places all tag
values in the same namespace as all non-variant members. This
leads to spurious collisions if a tag value matches a non-variant
member's name.
This patch is the front end for a series that converts to a
saner qapi union layout. By the end of the series, we will no
longer have the type/kind mismatch, and all tag values will be
under a named union, which requires clients to access
'obj->u.value' instead of 'obj->value'. But since the
conversion touches a number of files, it is easiest if we
temporarily support BOTH layouts simultaneously.
Given a simple union qapi type:
{ 'union':'Foo', 'data': { 'a':'int', 'b':'bool' } }
make the following changes in generated qapi-types.h:
| struct Foo {
|- FooKind kind;
|- union { /* union tag is @kind */
|+ union {
|+ FooKind kind;
|+ FooKind type;
|+ };
|+ union { /* union tag is @type */
| void *data;
| int64_t a;
| bool b;
|+ union { /* union tag is @type */
|+ void *data;
|+ int64_t a;
|+ bool b;
|+ } u;
| };
| };
Flat unions do not need the anonymous union for the tag member,
as we already fixed that to use the member name instead of 'kind'
back in commit 0f61af3e.
One additional change is needed in qapi.py: check_union() now
needs to check for collisions with 'type' in addition to those
with 'kind'.
Later, when the conversions are complete, we will remove the
duplication hacks, and also drop the check_union() restrictions.
Note, however, that we do not rename the generated enum, which
is still 'FooKind'. A further patch could generate implicit
enums as 'FooType', but while the generator already reserved
the '*Kind' namespace (commit 4dc2e69), there are already QMP
constructs with '*Type' naming, which means changing our
reservation namespace would have lots of churn to C code to
deal with a forced name change.
Backports commit f51d8fab44b231aa299d8de24cfdf9ba41ef4a21 from qemu
The code for visiting the base class of a child struct created
visit_type_Base_fields() which covers all fields of Base; while
the code for visiting the base class of a flat union created
visit_type_Union_fields() covering all fields of the base
except the discriminator. But since the base class includes
the discriminator of a flat union, we can just visit the entire
base, without needing a separate visit of the discriminator.
Not only is consistently visiting all fields easier to
understand, it lets us share code.
The generated code in qapi-visit.c loses several now-unused
visit_type_UNION_fields(), along with changes like:
|@@ -1654,11 +1557,7 @@ void visit_type_BlockdevOptions(Visitor
| if (!*obj) {
| goto out_obj;
| }
|- visit_type_BlockdevOptions_fields(v, obj, &err);
|- if (err) {
|- goto out_obj;
|- }
|- visit_type_BlockdevDriver(v, &(*obj)->driver, "driver", &err);
|+ visit_type_BlockdevOptionsBase_fields(v, (BlockdevOptionsBase **)obj, &err);
| if (err) {
| goto out_obj;
| }
and forward declarations where needed. Note that the cast of obj
to BASE ** is necessary to call visit_type_BASE_fields() (and we
can't use our upcast wrappers, because those work on pointers while
we have a pointer-to-pointer).
Backports commit 5c5e51a05b567fd48fb155d94ca6f7679dd0d478 from qemu
Rather than storing a base class as a pointer to a box, just
store the fields of that base class in the same order, so that
a child struct can be directly cast to its parent. This gives
less malloc overhead, less pointer dereferencing, and even less
generated code. Compare to the earlier commit 1e6c1616a "qapi:
Generate a nicer struct for flat unions" (although that patch
had fewer places to change, as less of qemu was directly using
qapi structs for flat unions). It also allows us to turn on
automatic type-safe wrappers for upcasting to the base class
of a struct.
Changes to the generated code look like this in qapi-types.h:
| struct SpiceChannel {
|- SpiceBasicInfo *base;
|+ /* Members inherited from SpiceBasicInfo: */
|+ char *host;
|+ char *port;
|+ NetworkAddressFamily family;
|+ /* Own members: */
| int64_t connection_id;
as well as additional upcast functions like qapi_SpiceChannel_base().
Meanwhile, changes to qapi-visit.c look like:
| static void visit_type_SpiceChannel_fields(Visitor *v, SpiceChannel **obj, Error **errp)
| {
| Error *err = NULL;
|
|- visit_type_implicit_SpiceBasicInfo(v, &(*obj)->base, &err);
|+ visit_type_SpiceBasicInfo_fields(v, (SpiceBasicInfo **)obj, &err);
| if (err) {
(the cast is necessary, since our upcast wrappers only deal with a
single pointer, not pointer-to-pointer); plus the wholesale
elimination of some now-unused visit_type_implicit_FOO() functions.
Without boxing, the corner case of one empty struct having
another empty struct as its base type now requires inserting a
dummy member (previously, the 'Base *base' member sufficed).
And now that we no longer consume a 'base' member in the generated
C struct, we can delete the former negative struct-base-clash-base
test.
Backports commit ddf21908961073199f3d186204da4810f2ea150b from qemu
A previous patch (commit 1e6c1616) made it possible to
directly cast from a qapi flat union type to its base type.
However, it requires the use of a C cast, which turns off
compiler type-safety checks. Fortunately, no such casts
exist, just yet.
Regardless, add inline type-safe wrappers named
qapi_FOO_base() for any union type FOO that has a base,
which can be used for a safer upcast, and enhance the
testsuite to cover the new functionality.
A future patch will extend the upcast support to structs,
where such conversions do exist already.
Note that C makes const-correct upcasts annoying because
it lacks overloads; these functions cast away const so that
they can accept user pointers whether const or not, and the
result in turn can be assigned to normal or const pointers.
Alternatively, this could have been done with macros, but
type-safe macros are hairy, and not worthwhile here.
This patch just adds upcasts. None of our code needed to
downcast from a base qapi class to a child. Also, in the
case of grandchildren (such as BlockdevOptionsQcow2), the
caller will need to call two functions to get to the inner
base (although it wouldn't be too hard to generate a
qapi_FOO_base_base() if desired). If a user changes qapi
to alter the base class hierarchy, such as going from
'A -> C' to 'A -> B -> C', it will change the type of
'qapi_C_base()', and the compiler will point out the places
that are affected by the new base.
One alternative was proposed, but was deemed too ugly to use
in practice: the generators could output redundant
information using anonymous types:
| struct Child {
| union {
| struct {
| Type1 parent_member1;
| Type2 parent_member2;
| };
| Parent base;
| };
| };
With that ugly proposal, for a given qapi type, obj->member
and obj->base.member would refer to the same storage; allowing
convenience in working with members without needing 'base.'
allowing typesafe upcast without needing a C cast by accessing
'&obj->base', and allowing downcasts from the parent back to
the child possible through container_of(obj, Child, base).
Backports commit 30594fe1cd4355626e73b80645428105d0df3cf6 from qemu
Move code from gen_union() into gen_struct_fields() in order for
a later patch to share code when enumerating inherited fields
for struct types.
No change to generated code.
Backports commit f87ab7f9bd956250c48b5c6e9b607b537fd21543 from qemu
We generate a static visit_type_FOO_fields() for every type
FOO. However, sometimes we need a forward declaration. Split
the code to generate the forward declaration out of
gen_visit_implicit_struct() into a new gen_visit_fields_decl(),
and also prepare for a forward declaration to be emitted
during gen_visit_struct(), so that a future patch can switch
from using visit_type_FOO_implicit() to the simpler
visit_type_FOO_fields() as part of unboxing the base class
of a struct.
No change to generated code.
Backports commit d02cf37766ba3cf918d7085aa7848c9dc05fd11a from qemu
c_name() produces names starting with 'q_' when protecting a
dictionary member name that would fail to directly compile, but
in doing so can cause clashes with any member name already
beginning with 'q-' or 'q_'. Likewise, we create a C name 'has_'
for any optional member that can clash with any member name
beginning with 'has-' or 'has_'.
Technically, rather than blindly reserving the namespace,
we could try to complain about user names only when an actual
collision occurs, or even teach c_name() how to munge names
to avoid collisions. But it is not trivial, especially when
collisions can occur across multiple types (such as via
inheritance or flat unions). Besides, no existing .json
files are trying to use these names. So it's easier to just
outright forbid the potential for collision. We can always
relax things in the future if a real need arises for QMP to
express member names that have been forbidden here.
'has_' only has to be reserved for struct/union member names,
while 'q_' is reserved everywhere (matching the fact that
only members can be optional, while we use c_name() for munging
both members and entities). Note that we could relax 'q_'
restrictions on entities independently from member names; for
example, c_name('qmp_' + 'unix') would result in a different
function name than our current 'qmp_' + c_name('unix').
Update and add tests to cover the new error messages.
Backports commit 9fb081e0b98409556d023c7193eeb68947cd1211 from qemu
Type names ending in 'List' can clash with qapi list types in
generated C. We don't currently use such names. It is easier to
outlaw them now than to worry about how to resolve such a clash
in the future. For precedence, see commit 4dc2e69, which did the
same for names ending in 'Kind' versus implicit enum types for
qapi unions.
Update the testsuite to match.
Backports commit 255960dd374d4497d6ea537305f1b0d8a3433789 from qemu
We were using regular expressions to see if ret included
any earlier text that emitted a 'goto out;' line, to decide
whether we needed to output an 'out:' label. But this is
fragile, if the ret text can possibly combine more than one
generated function body, where the first function used a
goto but the second does not. Change the code to just check
for the known conditions which cause an error check to be
needed. Besides, it's slightly more efficient to use plain
checks than regular expression searching.
No change to generated code.
Backports commit f9e6102b48f21e464a847a858a456c521e7a83e5 from qemu
Rather than slicing the end of a string, we can use python's
endswith(). And rather than creating a set of characters,
we can search for a character within a string.
Backports commit 8712fa5333ad348da20034b717dd814219d1ec11 from qemu
A future patch will move some error checking from the parser
to the various QAPISchema*.check() methods, which run only
after parsing completes. It will thus be possible to create
a python instance representing an implicit QAPI type that
parses fine but will fail validation during check(). Since
all errors have to have an associated 'info' location, we
need a location to be associated with those implicit types.
The intuitive info to use is the location of the enclosing
entity that caused the creation of the implicit type.
Note that we do not anticipate builtin types being used in
an error message (as they are not part of the user's QAPI
input, the user can't cause a semantic error in their
behavior), so we exempt those types from requiring info, by
setting a flag to track the completion of _def_predefineds(),
and tracking that flag in _def_entity().
No change to the generated code.
Backports commit 99df5289d8c7ebf373c3570d8fba3f3a73360281 from qemu
For simple unions, we were creating the implicit 'type' tag
member during the QAPISchemaObjectTypeVariants constructor.
This is different from every other implicit QAPISchemaEntity
object, which get created by QAPISchema methods. Hoist the
creation to the caller (renaming _make_tag_enum() to
_make_implicit_tag()), and pass the entity rather than the
string name, so that we have the nice property that no
entities are created as a side effect within a different
entity. A later patch will then have an easier time of
associating location info with each entity creation.
No change to generated code.
Backports commit 46292ba75c515baf733df18644052b2ce9492728 from qemu
Commit ac88219a had several TODO markers about whether we needed
to automatically create the corresponding array type alongside
any other type. It turns out that most of the time, we don't!
There are a few exceptions: 1) We have a few situations where we
use an array type in internal code but do not expose that type
through QMP; fix it by declaring a dummy type that forces the
generator to see that we want to use the array type.
2) The builtin arrays (such as intList for QAPI ['int']) must
always be generated, because of the way our QAPI_TYPES_BUILTIN
compile guard works: we have situations (at the very least
tests/test-qmp-output-visitor.c) that include both top-level
"qapi-types.h" (via "error.h") and a secondary
"test-qapi-types.h". If we were to only emit the builtin types
when used locally, then the first .h file would not include all
types, but the second .h does not declare anything at all because
the first .h set QAPI_TYPES_BUILTIN, and we would end up with
compilation error due to things like unknown type 'int8List'.
Actually, we may need to revisit how we do type guards, and
change from a single QAPI_TYPES_BUILTIN over to a different
usage pattern that does one #ifdef per qapi type - right now,
the only types that are declared multiple times between two qapi
.json files for inclusion by a single .c file happen to be the
builtin arrays. But now that we have QAPI 'include' statements,
it is logical to assume that we will soon reach a point where
we want to reuse non-builtin types (yes, I'm thinking about what
it will take to add introspection to QGA, where we will want to
reuse the SchemaInfo type and friends). One #ifdef per type
will help ensure that generating the same qapi type into more
than one qapi-types.h won't cause collisions when both are
included in the same .c file; but we also have to solve how to
avoid creating duplicate qapi-types.c entry points. So that
is a problem left for another day.
Generated code for qapi-types and qapi-visit is drastically
reduced; less than a third of the arrays that were blindly
created were actually needed (a quick grep shows we dropped
from 219 to 69 *List types), and the .o files lost more than
30% of their bulk. [For best results, diff the generated
files with 'git diff --patience --no-index pre post'.]
Interestingly, the introspection output is unchanged - this is
because we already cull all types that are not indirectly
reachable from a command or event, so introspection was already
using only a subset of array types. The subset of types
introspected is now a much larger percentage of the overall set
of array types emitted in qapi-types.h (since the larger set
shrunk), but still not 100% (evidence that the array types
emitted for our new Dummy structs, and the new struct itself,
don't affect QMP).
Backports commit 9f08c8ec73878122ad4b061ed334f0437afaaa32 from qemu
A future patch will enable error reporting from the various
QAPISchema*.check() methods. But to report an error related
to an implicit type, we'll need to associate a location with
the type (the same location as the top-level entity that is
causing the creation of the implicit type), and once we do
that, keying off of whether foo.info exists is no longer a
viable way to determine if foo is an implicit type.
Instead, add an is_implicit() method to QAPISchemaEntity, and use it.
It can be overridden later for ObjectType and EnumType, when implicit
instances of those classes gain info.
Backports commit 49823c4b4304a3e4aa5d67e089946b12d6a52d64 from qemu
The next few patches will start migrating error checking from
ad hoc parse methods into the QAPISchema*.check() methods. But
for an error message to display, we first have to fix the
overall 'try' to catch those errors. We also want to enable a
few more assertions, such as making sure every attempt to
raise a semantic error is passed a valid location info, or that
various preconditions hold.
The general approach for moving error checking will then be to
relax an assertion into an if that raises an exception if the
condition does not hold, and removing the counterpart ad hoc
check done during the parse phase.
Backports commit 7618b91ff80ec42b84b29be24d8ef53ddb377110 from qemu
Previously, qapi-types and qapi-visit filtered out implicit
objects during visit_object_type() by using 'info' (works since
implicit objects do not [yet] have associated info); meanwhile
qapi-introspect filtered out all schema types on the first pass
by returning a python type from visit_begin(), which was then
used at a distance in QAPISchema.visit() to do the filtering.
Rather than keeping these ad hoc approaches, add a new visitor
callback visit_needed() which returns False to skip a given
entity, and which defaults to True unless overridden. Use the
new mechanism to simplify all three filtering visitors.
No change to the generated code.
Backports commit 25a0d9c977c2f5db914b0a1619759fd77d97b016 from qemu
Since we have consolidated all generated code to use 'err' as
the name of the local variable for error detection, we can
simplify the decision on whether to skip error detection (useful
for deallocation paths) to be a boolean.
Backports commit 18bdbc3ac8b477e160d56aa6ecd6942495ce44d0 from qemu
Consolidate the code between visit, command marshalling, and
event generation that iterates over the members of a struct.
It reduces code duplication in the generator, so that a future
patch can reduce the size of generated code while touching only
one instead of three locations.
There are no changes to the generated marshal code.
The visitor code becomes slightly more verbose, but remains
semantically equivalent, and is actually easier to read as
it follows a more common idiom:
| visit_optional(v, &(*obj)->has_device, "device", &err);
|- if (!err && (*obj)->has_device) {
|- visit_type_str(v, &(*obj)->device, "device", &err);
|- }
| if (err) {
| goto out;
| }
|+ if ((*obj)->has_device) {
|+ visit_type_str(v, &(*obj)->device, "device", &err);
|+ if (err) {
|+ goto out;
|+ }
|+ }
The event code becomes slightly more verbose, but this is
arguably a bug fix: although the visitors are not well
documented, use of an optional member should not be attempted
unless guarded by a prior call to visit_optional(). Works only
because the output qmp visitor has a no-op visit_optional():
|+ visit_optional(v, &has_offset, "offset", &err);
|+ if (err) {
|+ goto out;
|+ }
| if (has_offset) {
| visit_type_int(v, &offset, "offset", &err);
Backports commit 82ca8e469666b169ccf818a0e36136aee97d7db0 from qemu
We had some pointless differences in the generated code for visit,
command marshalling, and events; unifying them makes it easier for
future patches to consolidate to common helper functions.
This is one patch of a series to clean up these differences.
This patch reduces the number of push_indent()/pop_indent() pairs
so that generated code is typically already at its natural output
indentation in the python files. It is easier to reason about
generated code if the reader does not have to track how much
spacing will be inserted alongside the code, and moreso when all
of the generators use the same patterns (qapi-type and qapi-event
were already using in-place indentation).
Arguably, the resulting python may be a bit harder to read with C
code at the same indentation as python; on the other hand, not
having to think about push_indent() is a win, and most decent
editors provide syntax highlighting that makes it easier to
visually distinguish python code from string literals that will
become C code.
There is no change to the generated output.
Backports commit 05372f708a8cb3556e4d67458de79417dadf241f from qemu
We had some pointless differences in the generated code for visit,
command marshalling, and events; unifying them makes it easier for
future patches to consolidate to common helper functions.
This is one patch of a series to clean up these differences.
This patch adjusts gen_visit_union() to use the same indentation
as other functions, namely, by jumping early to the error label
if the object was not set rather than placing the rest of the
body inside an if for when it is set.
No change in semantics to the generated code.
Backports commit e36c714e6aad7c9266132350833e2f263f6d8874 from qemu
We had some pointless differences in the generated code for visit,
command marshalling, and events; unifying them makes it easier for
future patches to consolidate to common helper functions.
This is one patch of a series to clean up these differences.
This patch names the goto labels 'out' (not 'clean') and 'out_obj'
(not 'out_end'). Additionally, the generator was inconsistent on
whether labels had a leading space [our HACKING is silent; while
emacs 'gnu' style adds the space to avoid littering column 1].
For minimal churn, prefer no leading space; this also matches
the style that is more prevalent in current qemu.git.
No change in semantics to the generated code.
Backports commit f782399cb4fa3fc4182cb046817f65a6db92ab07 from qemu
We had some pointless differences in the generated code for visit,
command marshalling, and events; unifying them makes it easier for
future patches to consolidate to common helper functions.
This is one patch of a series to clean up these differences.
This patch names the local visitor variable 'v' rather than 'm'.
Related objects, such as 'QapiDeallocVisitor', are also named by
their initials instead of an unrelated leading m.
No change in semantics to the generated code.
Backports commit f8b7f1a8eafa9f565ebecfe409e8741d38cd786b from qemu
We had some pointless differences in the generated code for visit,
command marshalling, and events; unifying them makes it easier for
future patches to consolidate to common helper functions.
This is one patch of a series to clean up these differences.
This patch consistently names the local error variable 'err' rather
than 'local_err'.
No change in semantics to the generated code.
Backports commit 2a0f50e8d973b01eda4c63bac4a5c79ea0f584ef from qemu
Rather than open-code the check for a valid base type, we
should reuse the common functionality. This allows for
consistent error messages, and also makes it easier for a
later patch to turn on support for inline anonymous base
structures.
Test flat-union-inline is updated to test only one feature
(anonymous branch dictionaries), which can be implemented
independently (test flat-union-bad-base already covers the
idea of an anonymous base dictionary).
Backports commit 376863ef4895ae709aadb6f26365a5973310ef09 from qemu
The previous commit added two tests that triggered an assertion
failure. It's fairly straightforward to avoid the failure by
just outright forbidding the collision between a union's tag
values and its discriminator name (including the implicit name
'kind' supplied for simple unions [*]). Ultimately, we'd like
to move the collision detection into QAPISchema*.check(), but
for now it is easier just to enhance the existing checks.
[*] Of course, down the road, we have plans to rename the simple
union tag name to 'type' to match the QMP wire name, but the
idea of the collision will still be present even then.
Technically, we could avoid the collision by naming the C union
members representing each enum value as '_case_value' rather
than 'value'; but until we have an actual qapi client (and not
just our testsuite) that has a legitimate reason to match a
case label to the name of a QMP key and needs the name munging
to satisfy the compiler, it's easier to just reject the qapi
as invalid.
Backports commit 7b2a5c2f9a52c4a08630fa741052f03fe5d3cc8a from qemu
Silence pep8, and make pylint a bit happier. Just style cleanups,
plus killing a useless comment in camel_to_upper(); no semantic
changes.
Backports commit 437db2549be383e52acad6cd4bf2862e98fdfc93 from qemu
pylint recommends that every exception class should explicitly
invoke the superclass __init__, even though things seem to work
fine without it.
Backports commit 59b00542659c8947f9d4e8c28d2d528ab3ab61a5 from qemu
Use of '"...%s" % include' to print non-strings can lead to
ugly messages, such as this (if the .json change is applied
without the qapi.py change):
Expected a file name (string), got: OrderedDict()
Better is to just omit the actual non-string value in the
message.
Backports commit 7408fb67c0f9403f6e40aecf97cf798fc14e2cd8 from qemu
qapi/introspect.json defines the introspection schema. It's designed
for QMP introspection, but should do for similar uses, such as QGA.
The introspection schema does not reflect all the rules and
restrictions that apply to QAPI schemata. A valid QAPI schema has an
introspection value conforming to the introspection schema, but the
converse is not true.
Introspection lowers away a number of schema details, and makes
implicit things explicit:
* The built-in types are declared with their JSON type.
All integer types are mapped to 'int', because how many bits we use
internally is an implementation detail. It could be pressed into
external interface service as very approximate range information,
but that's a bad idea. If we need range information, we better do
it properly.
* Implicit type definitions are made explicit, and given
auto-generated names:
- Array types, named by appending "List" to the name of their
element type, like in generated C.
- The enumeration types implicitly defined by simple union types,
named by appending "Kind" to the name of their simple union type,
like in generated C.
- Types that don't occur in generated C. Their names start with ':'
so they don't clash with the user's names.
* All type references are by name.
* The struct and union types are generalized into an object type.
* Base types are flattened.
* Commands take a single argument and return a single result.
Dictionary argument or list result is an implicit type definition.
The empty object type is used when a command takes no arguments or
produces no results.
The argument is always of object type, but the introspection schema
doesn't reflect that.
The 'gen': false directive is omitted as implementation detail.
The 'success-response' directive is omitted as well for now, even
though it's not an implementation detail, because it's not used by
QMP.
* Events carry a single data value.
Implicit type definition and empty object type use, just like for
commands.
The value is of object type, but the introspection schema doesn't
reflect that.
* Types not used by commands or events are omitted.
Indirect use counts as use.
* Optional members have a default, which can only be null right now
Instead of a mandatory "optional" flag, we have an optional default.
No default means mandatory, default null means optional without
default value. Non-null is available for optional with default
(possible future extension).
* Clients should *not* look up types by name, because type names are
not ABI. Look up the command or event you're interested in, then
follow the references.
TODO Should we hide the type names to eliminate the temptation?
New generator scripts/qapi-introspect.py computes an introspection
value for its input, and generates a C variable holding it.
It can generate awfully long lines. Marked TODO.
A new test-qmp-input-visitor test case feeds its result for both
tests/qapi-schema/qapi-schema-test.json and qapi-schema.json to a
QmpInputVisitor to verify it actually conforms to the schema.
New QMP command query-qmp-schema takes its return value from that
variable. Its reply is some 85KiBytes for me right now.
If this turns out to be too much, we have a couple of options:
* We can use shorter names in the JSON. Not the QMP style.
* Optionally return the sub-schema for commands and events given as
arguments.
Right now qmp_query_schema() sends the string literal computed by
qmp-introspect.py. To compute sub-schema at run time, we'd have to
duplicate parts of qapi-introspect.py in C. Unattractive.
* Let clients cache the output of query-qmp-schema.
It changes only on QEMU upgrades, i.e. rarely. Provide a command
query-qmp-schema-hash. Clients can have a cache indexed by hash,
and re-query the schema only when they don't have it cached. Even
simpler: put the hash in the QMP greeting.
Backports commit 39a181581650f4d50f4445bc6276d9716cece050 from qemu
With the previous commit, the generated marshalers just work, and save
us a bit of handwritten code.
Backports commit 6eb3937e9b20319e1c4f4d53e906fda8f5ccda10 from qemu
It's first class, because unlike '**', it actually works, i.e. doesn't
require 'gen': false.
'**' will go away next.
Backports commit 28770e057f265a4e70bcbdfc2447cce7b5f2dc19 from qemu
Generate just 'FOO' instead of 'struct FOO' when possible.
Drop helper functions that are now unused.
Make pep8 and pylint reasonably happy.
Rename generate_FOO() functions to gen_FOO() for consistency.
Use more consistent and sensible variable names.
Consistently use c_ for mapping keys when their value is a C
identifier or type.
Simplify gen_enum() and gen_visit_union()
Consistently use single quotes for C text string literals.
Backports commit e98859a9b96d71dea8f9af43325edd43c7effe66 from qemu
is_c_ptr() looks whether the end of the C text for the type looks like
a pointer. Works, but is fragile.
We now have a better tool: use QAPISchemaType method c_null(). The
initializers for non-pointers become prettier: 0, false or the
enumeration constant with the value 0 instead of {0}.
Backports commit 5710153e7310995b5d4127af267e36d8529b3b30 from qemu
Duplicated in commit 21cd70d. Yes, we can't import qapi-types, but
that's no excuse. Move the helpers from qapi-types.py to qapi.py, and
replace the duplicates in qapi-event.py.
The generated event enumeration type's lookup table becomes
const-correct (see commit 2e4450f), and uses explicit indexes instead
of relying on order (see commit 912ae9c).
Backports commit efd2eaa6c2992c214a13f102b6ddd4dca4697fb3 from qemu
Fixes flat unions to visit the base's base members (the previous
commit merely added them to the struct). Same test case.
Patch's effect on visit_type_UserDefFlatUnion():
static void visit_type_UserDefFlatUnion_fields(Visitor *m, UserDefFlatUnion **obj, Error **errp)
{
Error *err = NULL;
+ visit_type_int(m, &(*obj)->integer, "integer", &err);
+ if (err) {
+ goto out;
+ }
visit_type_str(m, &(*obj)->string, "string", &err);
if (err) {
goto out;
Test cases updated for the bug fix.
Fixes alternates to generate a visitor for their implicit enumeration
type. None of them are currently used, obviously. Example:
block-core.json's BlockdevRef now generates
visit_type_BlockdevRefKind().
Code is generated in a different order now, and therefore has got a
few new forward declarations. Doesn't matter.
The guard QAPI_VISIT_BUILTIN_VISITOR_DECL is renamed to
QAPI_VISIT_BUILTIN.
The previous commit's two ugly special cases exist here, too. Mark
both TODO.
Backports commit 441cbac0c7e641780decbc674a9a68c6a5200f71 from qemu
Fixes flat unions to get the base's base members. Test case is from
commit 2fc0043, in qapi-schema-test.json:
{ 'union': 'UserDefFlatUnion',
'base': 'UserDefUnionBase',
'discriminator': 'enum1',
'data': { 'value1' : 'UserDefA',
'value2' : 'UserDefB',
'value3' : 'UserDefB' } }
{ 'struct': 'UserDefUnionBase',
'base': 'UserDefZero',
'data': { 'string': 'str', 'enum1': 'EnumOne' } }
{ 'struct': 'UserDefZero',
'data': { 'integer': 'int' } }
Patch's effect on UserDefFlatUnion:
struct UserDefFlatUnion {
/* Members inherited from UserDefUnionBase: */
+ int64_t integer;
char *string;
EnumOne enum1;
/* Own members: */
union { /* union tag is @enum1 */
void *data;
UserDefA *value1;
UserDefB *value2;
UserDefB *value3;
};
};
Flat union visitors remain broken. They'll be fixed next.
Code is generated in a different order now, but that doesn't matter.
The two guards QAPI_TYPES_BUILTIN_STRUCT_DECL and
QAPI_TYPES_BUILTIN_CLEANUP_DECL are replaced by just
QAPI_TYPES_BUILTIN.
Two ugly special cases for simple unions now stand out like sore
thumbs:
1. The type tag is named 'type' everywhere, except in generated C,
where it's 'kind'.
2. QAPISchema lowers simple unions to semantically equivalent flat
unions. However, the C generated for a simple unions differs from
the C generated for its equivalent flat union, and we therefore
need special code to preserve that pointless difference for now.
Mark both TODO.
Backports commit 2b162ccbe875e5323fc04c1009addbdea4d35220 from qemu
The visitor will help keeping the code generation code simple and
reasonably separated from QAPISchema details.
Backports commit 3f7dc21bee1e930d5cccf607b8f83831c3bbdb09 from qemu
The QAPI code generators work with a syntax tree (nested dictionaries)
plus a few symbol tables (also dictionaries) on the side.
They have clearly outgrown these simple data structures. There's lots
of rummaging around in dictionaries, and information is recomputed on
the fly. For the work I'm going to do, I want more clearly defined
and more convenient interfaces.
Going forward, I also want less coupling between the back-ends and the
syntax tree, to make messing with the syntax easier.
Create a bunch of classes to represent QAPI schemata.
Have the QAPISchema initializer call the parser, then walk the syntax
tree to create the new internal representation, and finally perform
semantic analysis.
Shortcut: the semantic analysis still relies on existing check_exprs()
to do the actual semantic checking. All this code needs to move into
the classes. Mark as TODO.
Simple unions are lowered to flat unions. Flat unions and structs are
represented as a more general object type.
Catching name collisions in generated code would be nice. Mark as
TODO.
We generate array types eagerly, even though most of them aren't used.
Mark as TODO.
Nothing uses the new intermediate representation just yet, thus no
change to generated files.
Backports commit ac88219a6c78302c693fb60fe6cf04358540fbce from qemu
The camel_to_upper() method applies some heuristics to turn
a mixed case type name into an all-uppercase name. This is
used for example, to generate enum constant name prefixes.
The heuristics don't also generate a satisfactory name
though. eg
{ 'enum': 'QCryptoTLSCredsEndpoint',
'data': ['client', 'server']}
Results in Q_CRYPTOTLS_CREDS_ENDPOINT_CLIENT. This has
an undesirable _ after the initial Q and is missing an
_ between the CRYPTO & TLS strings.
Rather than try to add more and more heuristics to try
to cope with this, simply allow the QAPI schema to
specify the desired enum constant prefix explicitly.
eg
{ 'enum': 'QCryptoTLSCredsEndpoint',
'prefix': 'QCRYPTO_TLS_CREDS_ENDPOINT',
'data': ['client', 'server']}
Now gives the QCRYPTO_TLS_CREDS_ENDPOINT_CLIENT name.
Backports commit 351d36e454cddc67a1675740916636a7ccbf1c4b from qemu
A feature new in Python 2.7 crept into commit 77e703b: re.subn()'s
fifth argument. Avoid that, use re.compile().
Backports commit 2752e5bedb26fa0c7291f810f9f534b688b2f1d2 from qemu
check_type() first checks and peels off the array type, then checks
the element type. For two out of four error messages, it takes pains
to report errors for "array of T" instead of just T. Odd. Let's
examine the errors.
* Unknown element type, e.g.
tests/qapi-schema/args-array-unknown.json:
Member 'array' of 'data' for command 'oops' uses unknown type
'array of NoSuchType'
To make sense of this, you need to know that 'array of NoSuchType'
refers to '[NoSuchType]'. Easy enough. However, simply reporting
Member 'array' of 'data' for command 'oops' uses unknown type
'NoSuchType'
is at least as easy to understand.
* Element type's meta-type is inadmissible, e.g.
tests/qapi-schema/returns-whitelist.json:
'returns' for command 'no-way-this-will-get-whitelisted' cannot
use built-in type 'array of int'
'array of int' is technically not a built-in type, but that's
pedantry. However, simply reporting
'returns' for command 'no-way-this-will-get-whitelisted' cannot
use built-in type 'int'
avoids the issue, and is at least as easy to understand.
* The remaining two errors are unreachable, because the array checking
ensures that value is a string.
Thus, reporting some errors for "array of T" instead of just T works,
but doesn't really improve things. Drop it.
Backports commit eddf817bd823a90df209dfbdc2a0b2ec33b7cb77 from qemu
The first check ensures the second one can't trigger. Drop the first
one, because the second one is in a more logical place, and emits a
nicer error message.
Backports commit 65fbe125451da9421070ab03944c9600a264eefc from qemu
Clean up white-space, brace placement, and superfluous #ifdef
QAPI_TYPES_BUILTIN_CLEANUP_DEF.
Backports commit 3a864e7c52af15017d5082a9ee39a7919f46d2b5 from qemu
Reproducer: with
{ 'command': 'user_def_cmd4', 'returns': { 'a': 'int' } }
added to qapi-schema-test.json, qapi-commands.py dies when it tries to
generate the command handler function
Traceback (most recent call last):
File "/work/armbru/qemu/scripts/qapi-commands.py", line 359, in <module>
ret = generate_command_decl(cmd['command'], arglist, ret_type) + "\n"
File "/work/armbru/qemu/scripts/qapi-commands.py", line 29, in generate_command_decl
ret_type=c_type(ret_type), name=c_name(name),
File "/work/armbru/qemu/scripts/qapi.py", line 927, in c_type
assert isinstance(value, str) and value != ""
AssertionError
because the return type doesn't exist.
Simply outlaw this usage, and drop or dumb down test cases accordingly.
Backports commit 9b090d42aea9a0abbf39a1d75561a186057b5fe6 from qemu
A command's or event's 'data' must be a struct type, given either as a
dictionary, or as struct type name.
Commit dd883c6 tightened the checking there, but not enough: we still
accept 'union'. Fix to reject it.
We may want to support union types there, but we'll have to extend
qapi-commands.py and qapi-events.py for it.
Backports commit 315932b5edb86597adafbd1faa2d29c46499d8c3 from qemu
We don't actually enforce our "other than downstream extensions [...],
all names should begin with a letter" rule. Add a FIXME.
We should reject names that differ only in '_' vs. '.' vs. '-',
because they're liable to clash in generated C. Add a FIXME.
Backports commit d90675fa4bc256238b3dd3a7fdd5f9029eca00b8 from qemu
Add a FIXME to remind us to fully audit whether removing the
'void *data' branch of each qapi union type can be done safely.
Backports commit ca56a822dd538017715345cbbe1f8829e0cc2742 from qemu
The generated code passes mangled schema names to visit_type_enum()
and union's visit_start_struct(). Fix it to pass the names
unadulterated, like we do everywhere else.
Only qapi-schema-test.json actually has names where this makes a
difference: enum __org.qemu_x-Enum, flat union __org.qemu_x-Union2,
simple union __org.qemu_x-Union1 and its implicit enum
__org.qemu_x-Union1Kind.
Backports commit 40b3adec13a9e022ff5a2e2b81c243fc0a026746 from qemu
The visit_type_implicit_FOO() are generated on demand, right before
their first use. Used by visit_type_STRUCT_fields() when STRUCT has
base FOO, and by visit_type_UNION() when flat UNION has member a FOO.
If the schema defines FOO after its first use as struct base or flat
union member, visit_type_implicit_FOO() calls
visit_type_implicit_FOO() before its definition, which doesn't
compile.
Rearrange qapi-schema-test.json to demonstrate the bug.
Fix by generating the necessary forward declaration.
Backports commit 8c3f8e77215bfedb7854221868f655e148506936 from qemu
The struct generated for a flat union is weird: the members of its
base are at the end, except for the union tag, which is at the
beginning.
Example: qapi-schema-test.json has
{ 'struct': 'UserDefUnionBase',
'data': { 'string': 'str', 'enum1': 'EnumOne' } }
{ 'union': 'UserDefFlatUnion',
'base': 'UserDefUnionBase',
'discriminator': 'enum1',
'data': { 'value1' : 'UserDefA',
'value2' : 'UserDefB',
'value3' : 'UserDefB' } }
We generate:
struct UserDefFlatUnion
{
EnumOne enum1;
union {
void *data;
UserDefA *value1;
UserDefB *value2;
UserDefB *value3;
};
char *string;
};
Change to put all base members at the beginning, unadulterated. Not
only is this easier to understand, it also permits casting the flat
union to its base, if that should become useful.
We now generate:
struct UserDefFlatUnion
{
/* Members inherited from UserDefUnionBase: */
char *string;
EnumOne enum1;
/* Own members: */
union { /* union tag is @enum1 */
void *data;
UserDefA *value1;
UserDefB *value2;
UserDefB *value3;
};
};
Backports commit 1e6c1616a91cdcbe9a8387541f7689b8c11632aa from qemu
A flat union's tag member gets renamed to 'kind' in the generated
code. Breaks when another member named 'kind' exists.
Example, adapted from qapi-schema-test.json:
{ 'struct': 'UserDefUnionBase',
'data': { 'kind': 'str', 'enum1': 'EnumOne' } }
We generate:
struct UserDefFlatUnion
{
EnumOne kind;
union {
void *data;
UserDefA *value1;
UserDefB *value2;
UserDefB *value3;
};
char *kind;
};
Kill the silly rename.
Backports commit 0f61af3eb396ae163cd1572ce12e05f5d08d7c15 from qemu
gen_sync_call()'s parameter indent is useless: gen_sync_call() uses it
only as optional argument for push_indent() and pop_indent(), their
default is four, and gen_sync_call()'s only caller passes four. Drop
the parameter.
gen_visitor_input_containers_decl()'s parameter obj is always
"QOBJECT(args)". Use that, and drop the parameter.
Drop unused parameters of gen_marshal_output(),
gen_marshal_input_decl(), generate_visit_struct_body(),
generate_visit_list(), generate_visit_enum(), generate_declaration(),
generate_enum_declaration(), generate_decl_enum().
Drop unused variables in generate_event_enum_lookup(),
generate_enum_lookup(), generate_visit_struct_fields(), check_event().
Backports commit 5aa05d3f72e556752167f7005d6a3dea0f4432c5 from qemu
Use c_name() instead of ad hoc code. Doesn't upcase the -p prefix,
which is an improvement in my book. Unbreaks prefix containing '.',
but other funny characters remain broken. To be fixed next.
Backports commit 016a335bd8ca624f43adbb08fa1698c29ec52a1a from qemu
The guards around built-in declarations lose their _H. It never made
much sense anyway.
Backports commit 00dfc3b2c272d98556ec6095d56bdd8b036babf9 from qemu
Commit 05dfb26 added eatspace stripping to mcgen(). Move it to
cgen(), just in case somebody gets tempted to use cgen() directly
instead of via mcgen().
cgen() indents blank lines. No such lines get generated right now,
but fix it anyway.
We use triple-quoted strings for program text, like this:
'''
Program text
any number of lines
'''
Keeps the program text relatively readable, but puts an extra newline
at either end. mcgen() "fixes" that by dropping the first and last
line outright. Drop only the newlines.
This unmasks a bug in qapi-commands.py: four quotes instead of three.
Fix it up.
Output doesn't change
Backports commit 77e703b861d34bb2879f3e845482d5cf0a3a0ad1 from qemu
The enum string table parameters in various QOM/QAPI methods
are declared 'const char *strings[]'. This results in const
warnings if passed a variable that was declared as
static const char * const strings[] = { .... };
Add the extra const annotation to the parameters, since
neither the string elements, nor the array itself should
ever be modified.
Backports commit 2e4450ff432daef524cb3557fca68a3b7b5c7823 from qemu
Make sure that all generated C structs have at least one field; this
avoids potential issues with attempting to malloc space for
zero-length structs in C (g_malloc(sizeof struct) would return NULL).
It also avoids an incompatibility with C++ (where an empty struct is
size 1); that isn't important to us now but might be in future.
Generated empty structures look like this:
struct Abort
{
char qapi_dummy_field_for_empty_struct;
};
This silences clang warnings like:
./qapi-types.h:3752:1: warning: empty struct has size 0 in C, size 1 in C++ [-Wextern-c-compat]
struct Abort
^
Backports commit 83ecb22ba2c91a4674ae109595a8ed1da8de4d7a from qemu
Useless, because it can only occur in commands, and we're not dealing
with commands here.
Backports commit 4f3568002393380558705397bda4cd5f224ffe29 from qemu
Insert comments to separate sections dealing with parsing, semantic
analysis, code generation, and so forth.
Move helpers to their proper section.
Backports commit 00e4b285a31d19dcd88bd46729c9e09bfc9cc7fd from qemu
We maintain a stack of filenames in include_hist for convenient cycle
detection.
As error_path() demonstrates, the same information is readily
available in the expr_info, so just use that, and drop include_hist.
Backports commit a1366087270b312d94ff8c4031395a4218f160d4 from qemu
We print the name as it appears in the include expression. Tools
processing error messages want it relative to the working directory.
Make it so.
Backports commit 8608d2525186062099a38971c276752e7a38903a from qemu
qapi: Improve a couple of confusing variable names
Backports commits 12c707944927b8aa42752198dcf419a0bafe5d33 and
54414047eca5bee7d5ba6e7af5fb251f8635896c from qemu
Mandatory option is silly, and the error handling is missing: the
programs crash when -i isn't supplied. Make it an argument, and check
it properly.
Backports commit 16d80f61814745bd3f5bb9f47ae3b00edf9e1e45 from qemu
