tgkill() is not necessarily possible, as a sandbox might block this call.
This changelist tries different approaches depending on whether we received
a synchronous or an asynchronous signal. This fixes unittest failures and
also runs correctly in sandbox'd environments.
TEST=ran unittest, and opened about:crash in sandbox'd Chrome
BUG=395
A=markus@chromium.org
Original review: http://breakpad.appspot.com/159001
Review URL: http://breakpad.appspot.com/146002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@656 4c0a9323-5329-0410-9bdc-e9ce6186880e
what architecture name is shown in a symbol file's MODULE line, but the Mac
crash_report tool's on_demand_symbol_supplier does. The new Mac dumper
inadvertently used i386. Correct that to make it x86. Temporarily make the
on_demand_symbol_supplier accept symbol files whose architecture is i386.
Also add x86_64 to the set of architectures that the on_demand_symbol_supplier
considers valid.
BUG=none
TEST=none
Review URL: http://breakpad.appspot.com/143001
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@638 4c0a9323-5329-0410-9bdc-e9ce6186880e
Inspector::ReadMessages as was done before r627. The "hello" message contains
the parameter count and is referenced while the message reader loops through
parameter messages. Prior to r627, both messages were named |message|, which
was confusing, probably caused a compiler warning, and apparently provided the
motivation to share them. This caused the crash inspector to fail to properly
collect the parameters. The common failure mode (although others are possible)
was for the inspector to attempt tor read more parameter messages than were
available, resulting in an IPC timeout and inspector death. No crash report
would be written, and the application expecting its crash to be inspected
would time out waiting for a response from the inspector and then _exit. This
is effectively a failure to properly handle crashes.
The inner message is reintroduced, and named parameter_message for
disambiguation.
BUG=chromium:49821
TEST=Crashes catchable by the Mac Breakpad framework
Review URL: http://breakpad.appspot.com/123002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@628 4c0a9323-5329-0410-9bdc-e9ce6186880e
This patch avoids allocating many copies of identical strings appearing in
debugging information. Without this patch, running dump_syms on Mozilla's
libxul.so (with 173MiB of debugging information) has a peak resident set of
around 450MiB. With this patch, the peak is around 365MiB.
a=jimblandy, r=mark
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@626 4c0a9323-5329-0410-9bdc-e9ce6186880e
At present, the Linux symbol dumper maps the ELF file into memory to
examine the debugging information it contains, but then also calls
google_breakpad::FileID::ElfFileIdentifier, which maps the ELF file into
memory again. Some of our object files are large; Mozilla's libxul.so is
1.1GiB. Trying to map such files twice can interfere with tools like
valgrind that map themselves into high addresses (in an attempt to stay out
of the way of ordinary programs).
The FileID class has another method, ElfFileIdentifierFromMappedFile, that
operates on an already-loaded image of the file; use that instead.
a=jimblandy, r=thestig
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@625 4c0a9323-5329-0410-9bdc-e9ce6186880e
This patch avoids unnecessary use of the <cfoo> headers in files that don't
actually use the identifiers they declare in the std:: namespace.
It also changes some files to better conform with the "Names and Order of
Includes" rules in the Google C++ Style Guide.
A=jimb R=mark
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@619 4c0a9323-5329-0410-9bdc-e9ce6186880e
I came across a bunch of comments Neal had made on issue 55011 that I
hadn't addressed. This patch takes care of them.
A=jimb R=thestig
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@618 4c0a9323-5329-0410-9bdc-e9ce6186880e
The dwarf_cu_to_module_unittest and bytereader_unittest test executables
include object files from which they use no code.
A=jimb R=thestig
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@617 4c0a9323-5329-0410-9bdc-e9ce6186880e
This patch adds all the appropriate symbol dumper unit tests to the Mac
XCode dump_syms project. This allows us to test this code on a 64-bit
platform.
A=jimb R=mark
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@616 4c0a9323-5329-0410-9bdc-e9ce6186880e
The subclasses of CallFrameInfo::Rule store the rule currently in
force for recovering a register or computing the canonical frame
address. Their sole responsibility is to accurately convey rules from
the parser, which creates them, to a CallFrameInfo::Handler member
function, which consumes them. So, the types of their data members
should match those of the corresponding arguments of the corresponding
Handler member function.
CallFrameInfo::OffsetRule and CallFrameInfo::ValOffsetRule use an
'int' to store the rule's offset value, but
CallFrameInfo::Handler::OffsetRule and ...::ValOffsetRule expect a
'long'. On ABIs where 'long' is larger than 'int', this can cause
values to be truncated or sign-extended unexpectedly.
This patch changes those members to 'long'.
Fortunately, offsets appearing in real DWARF call frame information
never even come close to the limits of a 32-bit int, so this bug is
unlikely to cause any practical problems.
A=jimb R=thestig
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@615 4c0a9323-5329-0410-9bdc-e9ce6186880e
This patch rewrites the Mac symbol dumper to use the same set of classes
the Linux dumper does for reading debugging information from various
sources, consolidating them into a single table, and writing that out as a
Breakpad symbol file.
In the process, it also adds support for dumping DWARF call frame
information and .eh_frame exception-handling information as Breakpad 'STACK
CFI' records. This allows the Breakpad processor to generate stack traces
from code compiled with -fomit-frame-pointer.
The patch also replaces the DumpSymbols Objective C++ class with
google_breakpad::DumpSymbols, a plain C++ class. The code still uses some
Objective C++ to use the Foundation facilities for dealing with file names
in a file-system-independent fashion, and for examining the contents of
.dSYM bundles.
Since the code has been entirely rewritten, I have changed the author
lines.
A=jimb R=mark
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@614 4c0a9323-5329-0410-9bdc-e9ce6186880e
The #inclusions of <elf.h> and <link.h> were inherited from older code, but
the current code doesn't need anything from them, so they should be
removed.
A=jimb R=thestig
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@613 4c0a9323-5329-0410-9bdc-e9ce6186880e
For some reason, Mac OS X places DWARF debugging information in sections
whose names begin with "__", rather than the names beginning with "." given
in the DWARF spec. This patch changes google_breakpad::DwarfCUToModule to
look for line number information under both names.
A=jimb R=mark
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@612 4c0a9323-5329-0410-9bdc-e9ce6186880e
Instead of using bzero in main, use constructors to initialize the
Options structure.
Use C++ bool, not Objective-C BOOL.
Use a const NXArchInfo * to represent the architecture name, so that we can
use the NXGetLocalArchInfo, NXGetArchInfoFromName, etc. to handle things.
Delete the 'uuidStr' member; it is unused.
Leave Options::srcPath as an NSString, so that we can continue to use the
filesystem path abstraction methods provided by the Foundation framework.
A=jimb R=mark
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@611 4c0a9323-5329-0410-9bdc-e9ce6186880e
This patch adds files defining new classes in the google_breakpad::Mach_O
namespace for parsing fat binaries and Mach-O files. These are used in the
new dumper to handle STABS debugging information, DWARF call frame
information, and .eh_frame exception handling stack walking information.
These new classes are independent of endianness and word size, and
therefore can be used on binaries of all the relevant architectures: x86,
x86_64, ppc, and ARM.
The patch adds a complete set of unit tests for the new classes.
A=jimb R=mark (http://breakpad.appspot.com/93001/show, http://breakpad.appspot.com/115001/show)
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@610 4c0a9323-5329-0410-9bdc-e9ce6186880e
Created the exception_handler_test that test the generation of dump and the dumps themselves.
Moved all dump analysis code from minidump to its right class DumpAnalysis. The class is used by both minidump_test and exception_handler_test. The tests are way simpler that way (ie. no handling of HANDLE).
minidump_test now uses the minidump_generator class instead of using Win32. It works well and pass all tests.
exception_handler now passes both the exception and assertion infos to the client to generate the dump. If one is NULL it's going to be handled correctly.
crash_generation_client can now RequestDump with both exception and assertion info.
minidump_generator returns both the mini and full dump string pointers, and output both (or either) depending on which was generated.
All original interfaces and method signature are still there, but call the new functions if possible.
Review URL: http://codereview.chromium.org/1994015
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@596 4c0a9323-5329-0410-9bdc-e9ce6186880e
I had to remove the dependency from base (was using FilePath and ScopedHandle, replaced them by standard std::wstring and HANDLE). Also removed the logging and the main from the original files.
This will serve as a base for testing breakpad's dump generation. It is kept like this for easier tracking.
Review URL: http://codereview.chromium.org/1964006
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@592 4c0a9323-5329-0410-9bdc-e9ce6186880e
The XCode project file has become encrufted with duplicate Executable
entres and some strange settings. This patch deletes and recreates various
entries to make things neat again. It should have no effect on the
project's visible behavior.
a=jimblandy, r=thestig
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@591 4c0a9323-5329-0410-9bdc-e9ce6186880e
to TestAssembler::Section.
This patch helps the TestAssembler classes generate Mach-O object files for
use as test input.
This patch adds a new AppendCString overloading to TestAssembler::Section
for emitting null-terminated strings in fixed-length buffers, where the
string is truncated and the terminating null character omitted if the
string is too large for the buffer.
The patch includes unit tests for the new AppendCString overloading. It
also provides some for the existing overloading, which had been neglected.
a=jimblandy, r=mark
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@590 4c0a9323-5329-0410-9bdc-e9ce6186880e
Breakpad's Macintosh symbol dumper uses deprecated functions for
dealing with mixed-endianness code. This patch provides an overloaded
function, ByteSwap, that automatically chooses the OSSwap* functions
from <libkern/OSByteOrder.h> appropriate for its argument's
size.
This patch does *not* address warnings in src/common/mac/dump_syms.mm,
because that code is about to be replaced entirely; there's no reason to
bother reviewing a big, detailed patch against it.
a=jimblandy, r=mark
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@589 4c0a9323-5329-0410-9bdc-e9ce6186880e
It's possible to imagine an implementation of google_breakpad::Module in
which calling SetLoadAddress at different times as the Module is populated
would produce different output. For the Mac dumper, we'd like to depend on
its current behavior --- that the load address is subtracted off only when
writing the symbol file, and can be set at any time prior to that.
This patch makes that promise part of Module's contract, and adjusts the
test suite to verify that that promise is met.
a=jimblandy, r=thestig
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@588 4c0a9323-5329-0410-9bdc-e9ce6186880e
This patch addresses two differences between Linux and Macintosh OS X STABS
data:
- StabsReader assumes that the STABS entries follow the conventions for
storing STABS data in object file sections (that is, .stabs and
.stabstr), rather than in the object files's linker symbol table. On Mac
OS X, STABS entries live in the Mach-O file's LC_SYMTAB load command,
along with all the other linker symbols; they are not grouped into units
by N_UNDF entries.
This patch adds a boolean argument to the StabsReader constructor
indicating whether the parser should treat N_UNDF entries as unit
boundaries; this argument should be true on Linux, and false on Mac. The
patch changes src/common/linux/dump_symbols.cc to pass this new argument.
- Mac OS X STABS place SLINE (line number) records immediately before the
FUN record for the function to which they belong, and the values of such
records are absolute, not relative to the function start.
This patch extends the parser to queue up such records and report them to
the handler when we do see the FUN record. The meaning of
StabsHandler::Line remains unchanged; existing handlers do not need to be
adjusted.
This patch also adds unit tests for the new parser behaviors.
a=jimblandy, r=mark
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@587 4c0a9323-5329-0410-9bdc-e9ce6186880e
This patch factors out some of the common code in the StabsReader unit
tests into a fixture class. Pretty mechanical.
a=jimblandy, r=thestig
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@586 4c0a9323-5329-0410-9bdc-e9ce6186880e
An N_FUN stabs with no name is an explicit end-of-function marker, whose
value is the size of the function. This patch changes the stabs reader to
recognize these and use them to compute the function's ending address,
instead of treating them as functions with no names and mysterious
addresses. It also adds appropriate unit tests.
a=jimblandy, r=thestig
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@585 4c0a9323-5329-0410-9bdc-e9ce6186880e
All the other classes which receive debugging data from some sort of parser
and use it to populate a Module have names ending in "ToModule":
DwarfCUToModule, DwarfCFIToModule. Also, DumpStabsHandler doesn't actually
dump anything.
This patch renames the DumpStabsHandler class to StabsToModule, which is
more consistent and descriptive.
a=jimblandy, r=thestig
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@584 4c0a9323-5329-0410-9bdc-e9ce6186880e
StabsReader simply applies a reinterpret_cast to treat the stab entry data
as an array of 'struct nlist' structures, making the parser specific on the
host endianness, word size, and alignment rules. On Mac OS X, a single fat
binary file may contain object files of different ABIs, of which the user
chooses one at run time.
This patch changes the parser to read the data using the google_breakpad::
ByteCursor class, which can handle different endiannesses and word sizes.
The StabsReader constructor now takes arguments indicating the endianness
of the data and the size of each entry's value field. The patch changes
src/common/linux/dump_symbols.cc to pass the new argument.
This patch changes the StabsReader unit tests to use the google_breakpad::
TestAssembler classes to generate test data, rather than reading it from a
file. This makes it easy to generate test data in various endiannesses and
word sizes. It also adds tests for the new parser behaviors.
a=jimblandy, r=thestig
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@583 4c0a9323-5329-0410-9bdc-e9ce6186880e
The ByteBuffer and ByteCursor classes are utility classes for reading
binary files, handling endianness and word size issues in a portable way.
a=jimblandy, r=thestig
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@582 4c0a9323-5329-0410-9bdc-e9ce6186880e
The DumpStabsHandler class creates Module::Function objects as it processes
data from the StabsReader, but waits to add the Functions to the Module
until all parsing is complete and its Finalize member function is called,
so that it can compute line and function end addresses that the STABS data
may have left implicit.
If the DumpStabsHandler is destructed before its Finalize method is called,
it fails to free the Functions it has created, but not yet added to the
Module. (Adding a Function to a Module transfers ownership of the Function
to the Module.)
This adds a destructor to DumpStabsHandler which takes care of freeing any
Functions that it still owns.
a=jimblandy, r=thestig
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@576 4c0a9323-5329-0410-9bdc-e9ce6186880e
At the moment, the mappings from register numbers appearing in DWARF CFI
and .eh_frame exception handling sections to the appropriate
processor-specific names are in src/common/linux/dump_syms.cc. However, the
numberings are (for the most part) the same on all platforms using DWARF,
so there's no reason those tables shouldn't be shared between the Linux and
Mac symbol dumpers.
This patch moves the tables into a nested class of DwarfCFIToModule, so
they the Mac dumper can use them when it is changed to use
DwarfCFIToModule.
a=jimblandy, r=thestig
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@575 4c0a9323-5329-0410-9bdc-e9ce6186880e
The google_breakpad::TestAssembler classes are used in both the processor's
and the Linux dumper's test suites, and will soon be used in the Mac
dumper's tests as well. This patch moves their source files from
src/processor to src/common.
a=jimblandy, r=thestig
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@574 4c0a9323-5329-0410-9bdc-e9ce6186880e
When building with G++ 4.1.2, src/processor/cfi_frame_info.cc fails to
build with the error below. G++ 4.2.1 and later do not seem to report this
problem.
This patch works around the problem by casting stream.tellp() to
std::streamoff before doing the comparison.
src/processor/cfi_frame_info.cc: In member function `std::string google_breakpad::CFIFrameInfo::Serialize() const':
src/processor/cfi_frame_info.cc:105: error: ambiguous overload for `operator!=' in `stream.std::basic_ostringstream<char, std::char_traits<char>, std::allocator<char> >::<anonymous>.std::basic_ostream<_CharT, _Traits>::tellp [with _CharT = char, _Traits = std::char_traits<char>]() != 0'
src/processor/cfi_frame_info.cc:105: note: candidates are: operator!=(std::streamoff, int) <built-in>
/usr/lib/gcc/x86_64-redhat-linux/4.1.2/../../../../include/c++/4.1.2/bits/postypes.h:143: note: bool std::fpos<_StateT>::operator!=(const std::fpos<_StateT>&) const [with _StateT = __mbstate_t]
a=jimblandy, r=mmentovai
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@572 4c0a9323-5329-0410-9bdc-e9ce6186880e
pdb filenames in crash reports may contain embedded newlines. When
minidump-stackwalk prints these lines, it ends up with:
Module|olek8r4u.dll|6.0.6000.16386|\\xc2\\xeb\\x17\\x04J\\xb6:\\xbaT\\xf3\\xef\\xe8Y\\x90\\x86\\xaa\\xe5\\x16n\\xb1\\x80\\x85\\t\\x12!\\x16\\x0f\\x98\\xf8\\x89\\x16"\\x96\\xd4\\x84\\x88\\xea\\xe3\\r\\r\\x1b\\xca\\x85*^h\\xf5\\xdc\n\\xd9\\xf4}j\\x1d7\\xe39o\\x1f\\xc5\\xc4\\xa6x\\x8ba\\xe8\\xd6K\\x89H\\xe1\\xff\\xe7\\xf5\\xf0Y\\xfd\\xf5\\xdbu\\x0c\\x07\\x86\\xed|29E0B04FCCBE47EB86A6C819E8B89D051|0x00f60000|0x00ff2fff|0\n
Which has an embedded newline and the machine parser can't handle it. This
patch just strips the embedded newline, just as we strip embedded |
separator characters.
a=bsmedberg, r=jimblandy
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@571 4c0a9323-5329-0410-9bdc-e9ce6186880e
The Linux symbol dumper's classes are reasonably portable, and should be
usable for the Mac dumper as well. Move them to src/common, along with
their unit tests. Update #include directives and Makefile.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@567 4c0a9323-5329-0410-9bdc-e9ce6186880e
In the process of pairing up DWARF source lines with the functions they
belong to, the dumper detects and warns about regions of functions that
have no source line information, and vice versa. However, this seems to
occur in real code frequently enough (although not often) that the warnings
may obscure more serious problems.
This patch makes those warnings disabled by default in
DwarfCUToModule::WarningReporter. It does not add a way for the dump_syms
user to enable them.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@566 4c0a9323-5329-0410-9bdc-e9ce6186880e
In order to dump call frame information held in .eh_frame sections, the
dumper needs to know the proper base address to use for pointers encoded
using the DW_EH_PE_textrel encoding. This should be the start of the .text
section. However, due to a cut-and-paste typo, the dumper was supplying the
base address of the ".got" section instead.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@564 4c0a9323-5329-0410-9bdc-e9ce6186880e
The Linux dumper's Makefile doesn't record the object files' dependence on
header files at all, just because I was too lazy to write them out and knew
I would forget to keep them up to date anyway. But I've wasted too much
time tracking down mysterious segmentation faults and other problems after
changing header files, and I know it's wasted others' time, too.
a=jimblandy, r=nealsid,dmuir
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@563 4c0a9323-5329-0410-9bdc-e9ce6186880e
The comments don't accurately describe what the style guide says.
Regardless of what the style guide says, RTTI seems to make trouble in
practice, because so many people build with it disabled. Since only the
symbol dumper uses RTTI, not the client library, it may be practical for
people to simply enable RTTI for the dumper. Failing that, it may be best
in the long run to violate the style guide and make the code work sans
RTTI.
a=jimblandy, r=mmentovai
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@561 4c0a9323-5329-0410-9bdc-e9ce6186880e
- Use manifest constants for 'z' augmentation letters.
- Fix typos and rearrange some code for legibility.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@560 4c0a9323-5329-0410-9bdc-e9ce6186880e
Breakpad Linux client: Simplify VerifyStackReadWithMultipleThreads unit test.
As written, the VerifyStackReadWithMultipleThreads unit test makes
assumptions about the layout of thread_function's stack frame. As a result,
the test will fail when compiled with some compilers, or built with certain
optimization levels.
As an extension to C++, the GNU compilers allow you to request that a
variable be placed in a specific register. Using this, we can have
thread_function put the thread id in place where the test can find it
reliably.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@559 4c0a9323-5329-0410-9bdc-e9ce6186880e
As written, the VerifyStackReadWithMultipleThreads unit test makes
assumptions about the layout of thread_function's stack frame. As a result,
the test will fail when compiled with some compilers, or built with certain
optimization levels.
As an extension to C++, the GNU compilers allow you to request that a
variable be placed in a specific register. Using this, we can have
thread_function put the thread id in place where the test can find it
reliably.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@558 4c0a9323-5329-0410-9bdc-e9ce6186880e
Having an exception of interest makes the resultant minidumps look just like
crash dumps, in that the processor can identify the "crashing" tread.
This means such minidumps can be classified by the stack signature, in contrast to the current state of things, in which all such dumps get lumped on a single pile.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@557 4c0a9323-5329-0410-9bdc-e9ce6186880e
This adds support for 'STACK CFI' records (DWARF CFI) to the AMD64
stack walker. This is necessary for the stack trace to include any
frames other than the youngest. Unit tests are included.
a=jimblandy, r=mmentovai
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@554 4c0a9323-5329-0410-9bdc-e9ce6186880e
This patch allows the Breakpad minidump processor to use data from
STACK CFI records to generate stack traces for the ARM processor.
In the symbol dumper, we need a table mapping DWARF CFI register
numbers to their names: STACK CFI records refer to registers by name.
In the processor, we expand StackwalkerARM::GetCallerFrame to see if
there are STACK CFI records covering the callee, and then use those to
recover the caller's register values.
There's no good reason the ARM walker couldn't use the SimpleCFIWalker
interface declared in cfi_frame_info.h. Unfortunately, that interface
assumes that one can map register names to member pointers of the raw
context type, while MDRawContextARM uses an array to hold the
registers' values: C++ pointer-to-member types can't refer to elements
of member arrays. So we have to write out SimpleCFIWalker::FindCallerRegisters
in StackwalkerARM::GetCallerFrame.
We define enum MDARMRegisterNumbers in minidump_cpu_arm.h, for
convenience in referring to certain ARM registers with dedicated
purposes, like the stack pointer and the PC.
We define validity flags in StackFrameARM for all the registers, since
CFI could theoretically recover any of them. In the same vein, we
expand minidump_stackwalk.cc to print the values of all valid
callee-saves registers in the context --- and use the proper names for
special-purpose registers.
We provide unit tests that give full code and branch coverage (with
minor exceptions). We add a testing interface to StackwalkerARM that
allows us to create context frames that lack some register values.
a=jimblandy, r=mmentovai
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@553 4c0a9323-5329-0410-9bdc-e9ce6186880e
Extend google_breakpad::CFISection with the ability to produce
.eh_frame data. Entry headers have a different format, and pointers
can be encoded in new and fascinating ways.
Extend dwarf2reader::CallFrameInfo to be able to parse either DWARF
CFI or .eh_frame data, as determined by an argument to the
constructor. Cope with variations in header formats, encoded pointers,
and additional data in 'z' augmentation data blocks. Extend the unit
tests appropriately.
Extend dump_syms to look for a .eh_frame section, and if it is
present, find the necessary base addresess and parse its contents.
There's no need for DwarfCFIToModule to check the version numbers; if
CallFrameInfo can parse it, DwarfCFIToModule should be able to handle
it. Adjust tests accordingly.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@552 4c0a9323-5329-0410-9bdc-e9ce6186880e
The Linux C++ exception handling data format (.eh_frame) can specify a
number of different encodings for the addresses it contains. This
patch extends dwarf2reader::ByteReader to read pointers encoded in
these ways.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@551 4c0a9323-5329-0410-9bdc-e9ce6186880e
Define a new DWARF parser class, dwarf2reader::CallFrameInfo.
Extend google_breakpad::Module to store and write out 'STACK CFI' records.
Define a new google_breakpad::DwarfCFIToModule class, to accept DWARF
CFI data from the parser and populate a Module with the equivalent
STACK CFI records.
Extend the Linux symbol dumping tool, dump_syms, to use
dwarf2reader::CallFrameInfo, google_breakpad::DwarfCFIToModule, and
google_breakpad::Module to extract DWARF CFI from the executable or
shared library files and write it to the Breakpad symbol file.
Define CFISection, a new class derived from TestAssembler::Section,
for use in creating DWARF CFI data for test cases.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@550 4c0a9323-5329-0410-9bdc-e9ce6186880e
Add a CFIFrameInfo class (named for symmetry with WindowsFrameInfo) to
represent the set of STACK CFI rules in effect at a given instruction,
and apply them to a set of register values. Provide a SimpleCFIWalker
class template, to allow the essential CFI code to be shared amongst
the different architectures.
Teach BasicSourceLineResolver to partially parse 'STACK CFI' records,
and produce the set of rules in effect at a given instruction on
demand, by combining the initial rule set and the appropriate rule
deltas in a CFIFrameInfo object.
Adapt StackwalkerX86 and StackFrameX86 to retrieve, store, and apply
CFI stack walking information.
Add validity flags for all the general-purpose registers to
StackFrameX86::ContextValidity.
a=jimblandy, r=mmentovai
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@549 4c0a9323-5329-0410-9bdc-e9ce6186880e
Issue 53001 (http://breakpad.appspot.com/53001) defines the
TestAssembler classes; those, along with a new set of mock classes
defined in stackwalker_unittest_utils.h, make it possible for us to
actually do proper unit testing of a stack walker. These tests get us
full code coverage for stackwalker_x86.cc.
a=jimblandy, r=mmentovai
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@548 4c0a9323-5329-0410-9bdc-e9ce6186880e
This also adds two new test utility class groups, TestAssembler and
SynthMinidump. These are overkill for what I'm doing with them here
(and may simply be overkill, period), but they make it easy to write
unit tests for code that works on binary files or raw memory contents
in a cross-platform way. I'm planning to use them for the DWARF CFI
unwinding tests and the DWARF CFI parser tests.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@547 4c0a9323-5329-0410-9bdc-e9ce6186880e
Programs compiled with -ffunction-sections -Wl,--gc-sections may have
SO entries for the start of the compilation unit whose addresses are
zero, even when the compilation unit contains non-omitted functions at
non-zero addresses. The breakpad dumper should not assume that the
compilation unit starting address is always non-zero.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@542 4c0a9323-5329-0410-9bdc-e9ce6186880e
As explained in the code:
Given the right options, the GNU toolchain will omit unreferenced
functions from the final executable. Unfortunately, when it does so,
it does not remove the associated portions of the line number program;
instead, it lets the symbol references in the DW_LNE_set_address
instructions pointing to the now-deleted code resolve to zero. Given
this input, the DWARF line parser will call AddLine with a series of
lines starting at address zero.
Rather than collecting series of lines describing code that is not
there, we should drop them. Since the linker doesn't explicitly
distinguish references to dropped sections from genuine references to
zero, we must use a heuristic. We have chosen:
- If a line starts at address zero, omit it. (On the platforms
breakpad targets, it is extremely unlikely that there will be code
at address zero.)
- If a line starts immediately after an omitted line, omit it too.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@538 4c0a9323-5329-0410-9bdc-e9ce6186880e
Some versions of the libstdc++, the GNU standard C++ library, have
stream extractors for unsigned integer values that permit a leading
'-' sign (6.0.13); others do not (6.0.9). Regardless of the behavior
of the extractors, Breakpad postfix expressions should support
negative literals.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@537 4c0a9323-5329-0410-9bdc-e9ce6186880e
Some of the error messages that could be generated in the process of
parsing DWARF debugging information lack terminating newlines.
a=jimblandly, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@536 4c0a9323-5329-0410-9bdc-e9ce6186880e
Any DIE with an DW_AT_inline attribute can be cited by
DW_AT_abstract_origin attributes --- even if the value of the
DW_AT_inline attribute is DW_INL_not_inlined. Thus, we need to set the
inline_ flag on all such DIEs, regardless of the attribute's value.
This allows us to find names in situations like this:
<1><30cf>: Abbrev Number: 57 (DW_TAG_subprogram)
<30d0> DW_AT_specification: <0x3013>
<30d4> DW_AT_decl_file : 1
<30d5> DW_AT_decl_line : 92
<30d6> DW_AT_inline : 0 (not inlined)
<30d7> DW_AT_sibling : <0x30f0>
...
<1><30f5>: Abbrev Number: 59 (DW_TAG_subprogram)
<30f6> DW_AT_abstract_origin: <0x30cf>
<30fa> DW_AT_low_pc : 0x13bc
<30fe> DW_AT_high_pc : 0x13ec
<3102> DW_AT_frame_base : 0x2c (location list)
<3106> DW_AT_sibling : <0x3113>
a=jimblandy, r=nealsid,dmuir
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@526 4c0a9323-5329-0410-9bdc-e9ce6186880e
FindSectionByName will return the first section whose name starts with
NAME, because strncmp stops the comparison once NAME's characters have
been found to match. The comparison stops before the terminating '\0'.
For example, if we search for the section named ".eh_frame", we may
get the section named ".eh_frame_hdr".
Instead, check that the section name section has enough space to store
the complete name with its terminating '\0', and then use strcmp,
which will never examine more than strlen(NAME) + 1 bytes from the
section name section, regardless of its contents, and will require the
terminating '\0' to match as well.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@525 4c0a9323-5329-0410-9bdc-e9ce6186880e
This is preparation for adding support for reading Linux C++ exception
handling data's encoded pointers. The change should have no user-visible
effect; it simply expands the comments for dwarf2reader::ByteReader, and
regroups the member functions.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@522 4c0a9323-5329-0410-9bdc-e9ce6186880e
Without this patch, debugging information like the following will produce
FUNC records with no names, because the dumper (correctly) ignores the
DW_TAG_subprogram DIEs that lack DW_AT_low_pc/DW_AT_high_pc attributes, but
won't follow the DW_AT_abstract_origin link from the DIE that does have
code addresses to find its name.
<1><168>: Abbrev Number: 5 (DW_TAG_class_type)
<169> DW_AT_name : Foo
<2><183>: Abbrev Number: 7 (DW_TAG_subprogram)
<185> DW_AT_name : Foo
<18b> DW_AT_declaration : 1
<1><1b7>: Abbrev Number: 12 (DW_TAG_subprogram)
<1b8> DW_AT_specification: <0x183>
<1bc> DW_AT_inline : 2 (declared as inline but ignored)
<1><1dc>: Abbrev Number: 16 (DW_TAG_subprogram)
<1dd> DW_AT_abstract_origin: <0x1b7>
<1e1> DW_AT_low_pc : 0x8048578
<1e5> DW_AT_high_pc : 0x8048588
a=dmuir, r=jimblandy
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@520 4c0a9323-5329-0410-9bdc-e9ce6186880e
Yes, classes are useful. But that doesn't mean that every function has
to gratuitously become a member function. The Google C++ Style Guide
does not require this silliness, since the function is in the
google_breakpad namespace anyway.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@519 4c0a9323-5329-0410-9bdc-e9ce6186880e
This also includes some comments I promised Cary Coutant I'd write
about the appropriateness of processing attributes in EndAttributes
calls.
The Google C++ Style Guide requires each file to have an author notice
and a comment explaining the file's general purpose. For the record, I
don't think putting an author notice on the files is a good idea; it's
odd to have the original author retain prominence even if the file has
been heavily edited by others; the version control system answers this
question more accurately. This is only for Style Guide compliance. The
Apache group decided to discourage author annotations, partially for
these reasons:
http://mail-archives.apache.org/mod_mbox/jakarta-jmeter-dev/200402.mbox/%3C4039F65E.7020406@atg.com%3E
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@518 4c0a9323-5329-0410-9bdc-e9ce6186880e
We've gotten mixed advice from the lawyery types about whether this
matters. But it's easy enough to do.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@517 4c0a9323-5329-0410-9bdc-e9ce6186880e
This looks a little odd right now, since ParseStackInfo has only one
alternative to handle, but I think breaking this out should make the
subsequent addition of STACK CFI record support easier to review.
a=jimblandy, r=mmentovai
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@514 4c0a9323-5329-0410-9bdc-e9ce6186880e
Rename BasicSourceLineResolver::Module::StackInfoTypes to
WindowsFrameInfoTypes. This enum really describes the forms of
Windows-specific stack unwinding data (STACK WIN records), and its
name should reflect that, especially since we'll be adding support for
other kinds of stack walking information.
The 'stack' -> 'frame' shift matches the naming of the
WindowsFrameInfo type.
Similarly, rename BasicSourceLineResolver::Module::stack_info_ to
windows_frame_info_.
Do similar renamings in basic_source_line_resolver_unittest.cc.
a=jimblandy, r=mmentovai
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@513 4c0a9323-5329-0410-9bdc-e9ce6186880e
This patch moves the code for finding caller frames using STACK WIN
data and the code to do so using the traditional frame layout (%ebp
points at saved %ebp, pushed just after return address) into their own
functions. In addition to making things a little clearer, this is
preparation for adding support for STACK CFI records into the mix.
a=jimblandy, r=mmentovai
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@512 4c0a9323-5329-0410-9bdc-e9ce6186880e
This adds an EvaluateForValue member function to PostfixEvaluator, and
along with appropriate unit tests.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@511 4c0a9323-5329-0410-9bdc-e9ce6186880e
The Google C++ Style Guide requires all parameters passed by reference
to be labeled 'const', and says that pointers should be used for
output arguments. This patch brings google_breakpad::StackwalkerX86
into line.
a=jimblandy, r=mmentovai
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@510 4c0a9323-5329-0410-9bdc-e9ce6186880e
In order to be able to treat any MemoryRegion as const, the accessor
functions need to be declared this-const, which means annotations on
all the subclasses, etc. etc.
Since MinidumpMemoryRegion fills its memory_ member on demand, that
member needs to be marked 'mutable', but this is exactly the sort of
situation the 'mutable' keyword was intended for, so that seems all
right.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@509 4c0a9323-5329-0410-9bdc-e9ce6186880e
At the moment, StackwalkerX86::GetCallerFrame doesn't save the
WindowsFrameInfo that it finds for a frame unless it successfully
constructs the caller frame. This means that the windows_frame_info
field of the last frame on the stack is left unset, even when that
frame does have windows unwinding information.
This is not user-visible behavior, so it doesn't matter, but it is a
blemish on the interface, and unit tests (added in a later patch)
expect it.
This patch saves the information in the frame as soon as we find it.
a=jimblandy, r=mmentovai
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@508 4c0a9323-5329-0410-9bdc-e9ce6186880e
This extends the ElfArchitecture function to recognize the
architectures it seemed to me that breakpad was most likely to see.
Also: the dumper has historically not provided very helpful error
messages. This patch adds a few that were convenient, but we should do
an audit for this.
a=jimblandy, r=ted.mielczarek
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@507 4c0a9323-5329-0410-9bdc-e9ce6186880e
The Google C++ Style Guide says that members of structures needn't
have names ending in underscores. The structure types in
google_breakpad::Module don't follow this rule.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@505 4c0a9323-5329-0410-9bdc-e9ce6186880e
This patch moves the ReadInitialFunction from dwarf2reader.cc, where
it was a static function, to being a member function of
google_breakpad::ByteReader.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@504 4c0a9323-5329-0410-9bdc-e9ce6186880e
In r480, I botched the change to make the comparisons that decide
whether an address falls within a function's range safe from overflow.
The original code said:
address >= function_base && address < function_base + function_size
which is fine unless the function abuts the end of the address space,
in which case the addition overflows and you get a false negative.
My change subtracted function_size from both sides of the latter
comparison, which is meaning-preserving in true math, and gets you:
address >= function_base && address - function_size < function_base
This not only reads strangely, but also still overflows if
function_size is greater than address. That's rare, but I've added a
case to the unit tests that checks it.
My intent had been to replace the addition which could overflow with a
subtraction that was known not to overflow, namely:
address >= function_base && address - function_base < function_size
This is equivalent to the original in true math, and because of the
first comparison, we know the subtraction won't underflow in MemAddr
math.
The patch includes similar fixes to the public symbol lookup code, and
to FindWindowsFrameInfo, which was the only other function affected by
r480.
a=jimblandy, r=mmentovai
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@503 4c0a9323-5329-0410-9bdc-e9ce6186880e
Having NDEBUG be the default has wasted my time more often than I'm
proud to admit. There are no expensive asserts in the Linux symbol
dumper.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@502 4c0a9323-5329-0410-9bdc-e9ce6186880e
RangeMaps use the range's upper end as the key in the underlying map,
but RetrieveNearestRange was treating the key as the lower end.
a=jimblandy, r=mmentovai
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@501 4c0a9323-5329-0410-9bdc-e9ce6186880e
This adds DWARF support to the Breakpad Linux dumper. This is
implemented as two handler classes: google_breakpad::DwarfCUToModule
accepts data from dwarf2reader::CompilationUnit, and
google_breakpad::DwarfLineToModule accepts data from a
dwarf2reader::LineInfo, each populating a google_breakpad::Module with
the results. Behaviors specific to particular source languages are
handled by instances of a new class, google_breakpad::Language.
An input executable may contain both STABS and DWARF debugging
information: the dumper automatically recognizes what sorts of
information are available, and integrates the data into a single
output file.
All classes have unit tests, providing line and branch coverage of all
interesting code. Unit tests are written using the Google C++ Testing
Framework, and the Google C++ Mocking Framework where appropriate.
a=jimblandy, r=ccoutant
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@497 4c0a9323-5329-0410-9bdc-e9ce6186880e
dwarf2reader::CompilationUnit is a simple and direct parser for DWARF
data, but its handler interface is not convenient to use. In
particular, the same handler object receives data about all DIEs
processed. One can't use distinct classes to separate the information
needed to handle different kinds of data.
This patch defines a new adapter type, dwarf2reader::DIEHandler, which
implements the existing DWARF parser's handler interface, given a
handler written to a more comfortable, object-orient interface. The
comments in dwarf2diehandler.h provide more detail.
a=jimblandy, r=ccoutant
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@495 4c0a9323-5329-0410-9bdc-e9ce6186880e
Breakpad's DWARF line number info parser provides a code address,
file, and line number for each code/source pairing, but doesn't
provide the length of the machine code. This makes that change, as
discussed in the following thread:
http://groups.google.com/group/google-breakpad-dev/browse_thread/thread/ed8d2fde79319368p
This patch also makes the corresponding changes to the functioninfo.cc
module, used by the Mac dumper. This patch has no effect on the Mac
dumper's output.
a=jimblandy, r=ccoutant
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@494 4c0a9323-5329-0410-9bdc-e9ce6186880e
The DWARF specification specifices which names the sections containing
DWARF information should have. OSX uses slightly different names. This
patch changes the DWARF reader to look for the sections under both
sets of names.
a=jimblandy, r=ccoutant
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@493 4c0a9323-5329-0410-9bdc-e9ce6186880e
At the moment, the StackWalker GetCallerFrame member function expects
a vector of WindowsFrameInfo structures, even though WindowsFrameInfo
is only used or useful on one one implementation (StackWalkerX86).
This patch changes StackWalker::GetCallerFrame to no longer expect the
WindowsFrameInfo structures, and changes all implementations to match.
In particular, StackWalkerX86 is changed to find the WindowsFrameInfo
data itself, and store a pointer to whatever it got in the StackFrame
object itself (which is really a StackFrameX86).
To allow GetCallerFrame implementations to look up stack walking data,
StackWalker::resolver_ needs to be made protected, not private.
a=jimblandy, r=mmentovai
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@491 4c0a9323-5329-0410-9bdc-e9ce6186880e
The stabs reading code in google-breakpad incorrectly assumes that the
stabs data is a single compilation unit. Specifically, it ignores
N_UNDF stabs and assumes that all string indices are relative to the
beginning of the .stabstr section.
This is true when linking with the GNU linker by default, because the
GNU linker optimizes stabs debug info. The gold linker does not do
this optimization. It can be disabled when using the GNU linker with
the --traditional-format command line option.
For more details of the problem, see:
http://sourceware.org/bugzilla/show_bug.cgi?id=10338http://code.google.com/p/google-breakpad/issues/detail?id=359
This patch adds unit tests that reproduce the failure, and fixes the
stabs parser.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@490 4c0a9323-5329-0410-9bdc-e9ce6186880e
This adds a new variable, TEST_WRAPPER, to src/tools/linux/dump_syms.
Comments in the patch provide details.
This patch also moves the public variable section to sit after the
public phony targets.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@486 4c0a9323-5329-0410-9bdc-e9ce6186880e
Add a new member function to dwarf2reader::Dwarf2Handler,
ProcessAttributeReference, for reporting attribute values that are
references to other DIEs. This handler member function always receives
an absolute offset (that is, relative to the start of the .debug_info
section, not to the start of the compilation unit), regardless of the
form the attribute uses. (Some forms are CU-relative, some are
absolute.)
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@482 4c0a9323-5329-0410-9bdc-e9ce6186880e
src/processor/minidump.cc:1067: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 3 has type ‘unsigned int’
src/processor/stackwalker_arm.cc:83: warning: unused variable ‘last_frame’
src/processor/minidump_stackwalk.cc:163: warning: ‘trust_name’ may be used uninitialized in this function
a=jimblandy, r=ted.mielczarek
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@481 4c0a9323-5329-0410-9bdc-e9ce6186880e
At the moment, FillSourceLineInfo returns Windows DIA-based stack
walking data. In addition to being ugly, this makes it difficult to
provide access to DWARF CFI-based stack walking data in a symmetrical
way.
This patch changes FillSourceLineInfo to do the single job its name
suggests, and adds a second member function to
SourceLineResolverInterface to retrieve Windows DIA stack walking
information. A sibling member function will provide access to DWARF
CFI stack walking data.
a=jimblandy, r=mmentovai
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@480 4c0a9323-5329-0410-9bdc-e9ce6186880e
Also, rename stack_frame_info.h to windows_frame_info.h.
If it seems odd to have functions like FillSourceLineInfo returning
Windows-specific data structures... well, it is! This patch just makes
it more obvious what's going on.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@471 4c0a9323-5329-0410-9bdc-e9ce6186880e
This patch avoids comparisons between signed and unsigned values, as
warned about by G++ 4.4.1.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@469 4c0a9323-5329-0410-9bdc-e9ce6186880e
Previous patches added unit tests for the STABS parser and the
Breakpad symbol file writer; this adds unit tests for the "dumper"
class that sits between them, receiving data from the parser and
handing it to the writer. So now the whole pathway has coverage.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@467 4c0a9323-5329-0410-9bdc-e9ce6186880e
Adjust Module's interface a bit to facilitate testing:
- Make AssignSourceIds something a client can call --- it's perfectly
well-defined, so this is an okay change.
- Add GetFunctions, GetFiles and FindExistingfile member functions,
which the test harness will use to get results to examine.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@466 4c0a9323-5329-0410-9bdc-e9ce6186880e
A FUNC record's parameter size is also hexadecimal, and all values are
64 bits wide.
A line record's address and size are 64 bits wide.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@465 4c0a9323-5329-0410-9bdc-e9ce6186880e
Fix typos.
For CompilationUnit::Start, I was confused by the '-' in the original
comment, taking it for a parenthetic clause marker, assuming an
implicit "of the next compilation unit" at the end of the sentence.
The comments should refer to the ".debug_info" section, not the
"debug_info" section. The latter is not the section name actually used
on any system (ELF or Mach-O), and the former is the name prescribed
by the DWARF spec.
Some of the comments for ProcessAttribute* member functions claim that
OFFSET is from the start of the compilation unit, but that's not so:
the code has always passed an offset relative to the start of the
.debug_info section.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@453 4c0a9323-5329-0410-9bdc-e9ce6186880e
src/common/dwarf/dwarf2reader.cc uses the old-fashioned <stdio.h>
facilities to report errors. Ideally, we would add a 'Warning' message
to the handler and make the client responsible for dealing with the
errors, but this at least allows us to compile.
Ubuntu 9.10 uses GCC 4.4.1; under older versions of GCC, this wasn't a
problem, probably because stdio.h was being brought in inadvertently
somewhere else.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@449 4c0a9323-5329-0410-9bdc-e9ce6186880e
It seems that a use of the <stdint.h> type uintptr_t has crept into
the DWARF parser. This defines a workaround for the GNU compilers
(tested on both Mac and Linux) which will raise an error if it doesn't
work.
My personal preference would be just to assume that the <stdint.h>
header is available and use the standard types everywhere, but 1) that
would be a large change, likely to make merges with the other branches
of the DWARF parser more difficult, and 2) it would make it quite
difficult to build under Microsoft Visual Studio, which doesn't have
the <stdint.h> header; Microsoft has said they have no plans to
provide it, as they would rather "focus their efforts" on C++ and
.NET.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@448 4c0a9323-5329-0410-9bdc-e9ce6186880e
Building on Ubuntu 9.10 with the distributed compiler (GCC 4.4.1), we get
warnings like the following:
guid_creator.cc:56: warning: dereferencing type-punned pointer will break strict-aliasing rules
It doesn't matter in this case, but there's no crying need to use
reinterpret casts in an endian-dependent way when there are plenty of
well-defined ways to get the same effect.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@447 4c0a9323-5329-0410-9bdc-e9ce6186880e
Move the DWARF parser, and the functioninfo.cc DWARF consumer, from
src/common/mac/dwarf to src/commmon/dwarf, so that it can be shared
between the Mac and Linux dumpers.
Fix up #include directives, multiple inclusion protection macros, and
Xcode build files.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@446 4c0a9323-5329-0410-9bdc-e9ce6186880e
The test system is based on Google C++ Testing Framework and the
Google C++ Mocking Framework.
This includes a parser that turns human-readable input files ("mock
stabs") into .stab and .stabstr section contents, which we can then
pass to a StabsReader instance, using a handler object written with
GoogleMock. The 'make check' target in src/tools/linux/dump_syms runs
this.
The supplied input file is pretty small, but I've done coverage
testing, and it does cover the parser.
I thought the mock stabs parser would be less elaborate than it turned
out to be. Lesson learned.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@444 4c0a9323-5329-0410-9bdc-e9ce6186880e
If the input passed to a StabsReader instance contains a compilation
unit whose first entry is an N_SO with no name, the parser enters an
infinite loop. Since such entries mark the end of a compilation unit,
ProcessCompilationUnit should skip them.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@443 4c0a9323-5329-0410-9bdc-e9ce6186880e
The StabsHandler class should not provide a fallback definition for
its Warning member function that just throws away warning messages.
It should require the consumer to provide an appropriate definition.
a=jimblandy, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@442 4c0a9323-5329-0410-9bdc-e9ce6186880e
Use GNU Make features to make the dumper, unit tests, and maintenance
targets more independent, so I get fewer conflicts as I work on
different parts of the patch series.
In particular:
- Provide targets to run tests and produce test coverage reports.
- Gather C and C++ build rules in one place.
- Avoid variables that list object files, as pattern rules can compute
these values directly from the dependencies.
- Use VPATH to find sources in other directories.
a=jimb, r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@441 4c0a9323-5329-0410-9bdc-e9ce6186880e
Modern GNU compilers warn about the #inclusion of <ext/hash_map>; that
container is deprecated, and code should use <tr1/unordered_map>
instead. However, to stay within the boundaries of C++ '98, it's
probably fine just to use plain old std::map.
Breakpad uses hash_map in three cases:
o The DWARF reader's SectionMap type maps object file section names to
data. This map is consulted once per section kind per DWARF
compilation unit; it is not performance-critical.
o The Mac dump_syms tool uses it to map machine architectures to
section maps in Universal binaries. It's hard to imagine there
ever being more than two entries in such a map.
o The processor's BasicSourceLineResolver uses a hash_map to map file
numbers to file names. This is the map that will probably have the
most entries, but it's only accessed once per frame, after we've
found the frame's line entry.
a=jimblandy
r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@393 4c0a9323-5329-0410-9bdc-e9ce6186880e
Fix some typos and references to member functions that didn't make the
final cut.
a=jimblandy
r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@381 4c0a9323-5329-0410-9bdc-e9ce6186880e
src/linux/common/module.h defines a new class, google_breakpad::Module,
that can represent the contents of a breakpad symbol file. Module::Write
writes a well-formed symbol file to the given stream.
src/linux/common/dump_symbols.cc can now lose its symbol-file-writing
code, and change DumpStabsHandler to populate a Module object, rather
than the old SymbolInfo/SourceFileInfo/... collection of types.
The code to compute function and line sizes, even in the absence of
reliable size data in STABS, is moved into a new Finalize method of
DumpStabsHandler, which is responsible for completing the Module's
contents.
a=jimblandy
r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@380 4c0a9323-5329-0410-9bdc-e9ce6186880e
With this patch, dump_symbols.cc no longer knows about the details of
the STABS debugging format; that is handled by the StabsReader class.
dump_symbols.cc provides a subclass of StabsHandler that builds
dump_symbols' own representation of the data.
a=jimblandy
r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@378 4c0a9323-5329-0410-9bdc-e9ce6186880e
Because the actual N_FUN strings in the .stabstr section contain type
information after the mangled name, representing this information
using a pointer into .stabstr, while efficient with memory, makes the
FuncInfo data structure STABS-specific: one must know the details of a
STABS N_FUN string's syntax to interpret FuncInfo::name. This patch
removes this STABS dependency from the data structure, and moves us
closer to having an appropriate structure for representing unified
STABS and DWARF data.
a=jimblandy
r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@375 4c0a9323-5329-0410-9bdc-e9ce6186880e
In STABS, if one function's line number information contains an N_SOL
entry to switch to a new source file, then the next function's line
data should pick up in the same source file where the prior function
left off. However, the Linux dumper restarts each function in the
compilation unit's main source file. This patch fixes that, so that
the output attributes the lines in subsequent functions to the correct
source files.
a=jimblandy
r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@373 4c0a9323-5329-0410-9bdc-e9ce6186880e
Let LineInfo structures point directly to their SourceLineInfo
structures, rather than holding the index of the file's name in the
.stabstr section in the early phases, and then later the holding
source_id of the file.
This is another step in the process of moving STABS-specific values
out of the types that represent the breakpad symbol data. When we're
done, the non-STABS structures will be something that we can populate
with both STABS and DWARF data --- or at least it will be more easily
replaced with such.
a=jimblandy
r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@371 4c0a9323-5329-0410-9bdc-e9ce6186880e
std::vector::erase() invalidates the iterator, so we need
to advance the iterator by using the return value of erase().
R=nealsid
A=wtc
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@370 4c0a9323-5329-0410-9bdc-e9ce6186880e
STABS information introduces a compilation unit with an N_SO entry
whose address is the start address of the file and whose string is the
name of the compilation unit's main source file. However, STABS
entries can only hold one address, so STABS indicates the compilation
unit's ending address with an N_SO entry whose name is empty.
Currently, the dumper's data structures simply create SourceFileInfo
structures with empty names for these end-of-unit N_SO entries. We
want to remove STABS-specific characteristics from these structures so
that we can replace them with an input-format-independent structure.
This moves end-of-compilation-unit addresses out of the symbol table
structure, and into their own list of boundary addresses.
a=jimblandy
r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@369 4c0a9323-5329-0410-9bdc-e9ce6186880e
Use a list of pointers to SourceFileInfo structures, not a list of the
structures themselves. This is preparation for a subsequent patch
which makes the data structures less STABS-specific.
This patch introduces a memory leak. If an included file is
referenced only by line entries for functions that LoadFuncSymbols
elected to omit from the func_info list, then its SourceFileInfo
structure is leaked when we destroy the name_to_file map. This leak
is fixed in a subsequent patch by letting the map of files by name own
the file objects.
a=jimblandy
r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@368 4c0a9323-5329-0410-9bdc-e9ce6186880e
Replace the sorted lists of files and functions with an array of
boundary addresses. This replaces CompareAddress with the default
comparison, and SortByAddress and NextAddress with the stock STL sort
and upper_bound algorithms, losing ~50 lines of code.
a=jimblandy
r=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@367 4c0a9323-5329-0410-9bdc-e9ce6186880e
In NextAddress, check both the file list and the function list for the
nearest boundary. Don't assume that, if we find any bounding entry in
the function list, that must be the nearest thing.
A=jimblandy
R=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@365 4c0a9323-5329-0410-9bdc-e9ce6186880e
The current arrangement would produce needless warnings if
WriteSymbolFile were ever used twice in the same program invocation.
Even if it weren't wrong, it's unnecessary, and local non-const static
variables require extra care when reading to be sure of their effect.
A=jimblandy
R=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@363 4c0a9323-5329-0410-9bdc-e9ce6186880e
With this patch, the time required to generate Breakpad symbols for
Firefox's libxul.so on a MacBook Pro 3,1 drops from 32s to 2s.
I verified that this patch had no effect on the output of dump_syms
when applied to firefox-bin and its libraries when built with -gstabs+.
A=jimblandy
R=nealsid
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@362 4c0a9323-5329-0410-9bdc-e9ce6186880e
- Made localization for UI entirely string-based, with flexible layout based on the size of the strings inserted.
- Made the request for an email address optional.
- Fixed a bug that would prevent comments or email from being collected if the text field were still focused.
- Refactored askUserPermissionToSend.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@335 4c0a9323-5329-0410-9bdc-e9ce6186880e
This upload fixes five issues:
1) Preston's email was hardcoded in the xib :-(
2) Changed from xib to NIB to facilitate Tiger building
3) Changed the logs location to be user specifiable by BreakpadMinidumpLocation
key, or ~/Library/Breakpad/<BREAKPAD_PRODUCT> by default
4) Fixed GTM Defines problem in order to build on Tiger
5) Also set CFBundleIcon in the sender program correctly, and updated plist, and
renamed ReporterIcons to crash_report_sendER.ICNS. However the rietveld upload
script doesn't appear to pick up renamed files correctly, so that file doesn't
show up in the patch upload.
Also various comments were updated for accuracy.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@323 4c0a9323-5329-0410-9bdc-e9ce6186880e
Written by Ginn Chen & Eagle.Lu@
R=nealsid (although I don't have a Solaris machine to build on, & these changes look localized to Sun-only builds)
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@314 4c0a9323-5329-0410-9bdc-e9ce6186880e
The method of calculating a binary ID using the LC_ID command isn't compatible with non-default build processes, most Mac consumers
use LC_UUID anyway but for those that don't, MD5 is a better choice
R=nealsid
W=Ted.Mielczarek
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@313 4c0a9323-5329-0410-9bdc-e9ce6186880e
the graceful code inside a #ifdef.
The problem is:
If ExceptionHandler is created and destroyed in DllMain, then the previous change to
remove the call to TerminateThread will lead to a deadlock. This is because inside
DllMain the loader lock is acquired, and the previous change waits for the handler
thread to exit in the destructor, that is with the loader lock acquired. But the
handler thread cannot finish until it gets the loader lock to call DllMain for
THREAD_DETACH.
With this change, we add conditional compilation so that clients that want to
avoid the call to terminate thread can do it by defining the appropriate preprocessor
variable.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@309 4c0a9323-5329-0410-9bdc-e9ce6186880e
Modified dump_syms to detect dSYM bundles or a binary with DWARF data appropriately, and convert data from DWARF reader to dump_syms native structures
R=danny.berlin (original writer of DWARF code)
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@286 4c0a9323-5329-0410-9bdc-e9ce6186880e
only in case of in-process dump generation; otherwise the dump processing code of
breakpad doesn't identify the crashing thread properly.
I am checking this in to-be-reviewed since it is needed urgently in one of the
products at Google.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@276 4c0a9323-5329-0410-9bdc-e9ce6186880e
details (second half of the post).
Changing PROCESS_ALL_ACCESS to GENERIC_ALL in ClientInfo class when
opening the client process handle on the OOP server side.
A minor change to pipe name in the test app also.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@274 4c0a9323-5329-0410-9bdc-e9ce6186880e
make the code compatible for teams that still use VS 2003 to build.
Fix a bug in client ClientInfo class that returned CustomClientInfo struct containing
a pointer in the client process address space instead of pointer to in-process data
structure.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@271 4c0a9323-5329-0410-9bdc-e9ce6186880e
scenarios that the OOP server can use in whatever way it wants to.
Fix a bug in CrashGenerationserver where CreateNamedPipe failure was not checked correctly.
TODO in near future: Add a custom stream to minidump files for the custom information.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@267 4c0a9323-5329-0410-9bdc-e9ce6186880e
tests(ok, just one) for the private copy of nlist that I checked in
last week, plus lay some of the ground work for collecting code
coverage numbers. Both of these are accomplished by leveraging the
built-in facilities of Xcode & Developer Tools(namely, CPlusTest and
gcov integration; however, eventually I will also add a way to get
lcov results from the gcov results). I also:
- renamed breakpad_nlist_64.c to breakpad_nlist_64.cc to be more
consistent(even though it's not C++ code it still only gets called by
C++ code so I don't have to deal with extern "C" constructs).
- I created a new target (minidump_tests) that has a "Coverage"
configuration with the appropriate GCC flags turned on. It is only
compiled in 64-bit configurations and has 10.5 as a minimum
deployment target as well as uses the 10.5 SDK.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@260 4c0a9323-5329-0410-9bdc-e9ce6186880e
64-bit builds of Leopard. I ported the code over myself and will
check it into the Breakpad tree until we decide there's a better
longer-term solution. If you want to diff the changes, the Apple
source is in libc/gen/nlist.c(I used 498 from 10.5.2).
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@259 4c0a9323-5329-0410-9bdc-e9ce6186880e
security attributes on the pipe. This is useful when the process
hosting the crash server wants to let processes from other users to
connect to it and generate dumps for them.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@258 4c0a9323-5329-0410-9bdc-e9ce6186880e
I waited for the style reviewer to approve all my code so hopefully there
should be no more style related check-ins.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@256 4c0a9323-5329-0410-9bdc-e9ce6186880e
Have sent an email for code review already but this check-in is urgent
to fix potential build breaks.
It contains the following changes:
- Change project settings for exception_handler.vcproj so that it links in
crash_generation.lib so that the applications using exception_handler.lib
do not have to link to crash_generation.lib. Make these changes for all 4
build configurations.
- Change the test app project settings to not link to crash_generation.lib
and only link to exception_handler.lib; again for all four configurations.
These changes help the applications that are currently linking to exception_handler.lib
in that they don't have to link to one more lib to get out-of-process dump generation
functionality. In fact, even if they do not use out-of-process dump generation functionality,
after those changes, the apps will need to link with crash_generation.lib anyway in order to
build correctly. This change will eliminate that need.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@248 4c0a9323-5329-0410-9bdc-e9ce6186880e
added in my last check-in for out-of-process dump generation. My last check-in broke the breakpad_client.sln
build for non debug builds since for the new project that I added (crash_generation.vcproj) to that solution,
I always only changed project properties for debug build. In fact, I didn't have the static-crt build configurations
for the new project either. Similar problems existed for the test application I added, windows/test/crash_generation_app).
This changelist contains changes to 2 solution files, 2 vcproj files and 1 .cc file. The fixes to .cc file are to avoid
warnings on variables used only in debug modes (in asserts) when building in release modes.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@247 4c0a9323-5329-0410-9bdc-e9ce6186880e
Implement out-of-process dump generation for Windows platform.
Details:
- Created a lib, crash_generation.lib, that implements the out-of-process dump generation protocol.
- The lib code is under client/windows/crash_generation folder and is organized in the following way:
- CrashGenerationServer class (crash_generation_server.h/.cc) implements the server side of
the protocol.
- CrashGenerationClient class (crash_generation_client.h/.cc) implements the client side of
the protocol.
- MinidumpGenerator class (minidump_generator.h/.cc) serves as an abstractino for generating
dump files using Windows APIs, coming up with new file names by creating GUIDs, etc.
- ProtocolMessage class (ipc_protocol.h) represents the message format between the client and server
for pipe IPC.
- Server allows one client at a time on the pipe in the current implementation.
- ReadMe.txt explains the state machine the server uses to serve clients.
- ExceptionHandler is modified and a new constructor is added that allows specifying the pipe name. If the
pipe name is NULL, the behavior is backward compatible - in-process dump generation is done as before. If
the pipe name is specified, out-of-process dump generation registration is attempted. If that fails, the
behavior is again backward compatible.
- If out-of-process registration succeeds, all write dump requests, direct or indirect, are directed to
crash server process that served the registration request. NOTE that the explicit dump requests made by
calling the static method of ExceptionHandler are not directed to theserver.
- client/windows/tests/crash_generation_app implements a simple Win32 GUI application to help test the
out-of-process dump generation client and server. Typical use of the app is to start one instance, click
Server --> Start and then start the other instance. The other instance will register with the first
instance automatically at start-up. Then the second instance can be used to request various typoes of
dump requests by using options under the Client menu.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@244 4c0a9323-5329-0410-9bdc-e9ce6186880e
having been initialized. The code is correct however the compiler can't see
the relationship between has_content_length_header and the claimed_size so it
generates a warning.
Patch from Sorin Jianu, r=bryner
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@211 4c0a9323-5329-0410-9bdc-e9ce6186880e
- Only looks for EXC_MASK_BAD_ACCESS, EXC_MASK_BAD_INSTRUCTION, and EXC_MASK_ARITHMETIC exceptions
- Adds try/catch blocks around "new" for bad_alloc
- Uses map.find() rather than map[] notation so as not to create extraneous objects
- Creates the exception watching thread as detached
r=mmentovai
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@117 4c0a9323-5329-0410-9bdc-e9ce6186880e
- Calculate unique file id for mach-o files
- Add file id support to dump_syms and symupload tools
- Fix return values of tools to indicate success or failure
- Change dump_syms class to be Objective-C++
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@109 4c0a9323-5329-0410-9bdc-e9ce6186880e
ExceptionHandler on Windows. Patch by John Abd-El-Malek. r=me
Interface change: post-dump and pre-dump (filter) callbacks now must accept
an additional EXCEPTION_POINTERS* argument.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@103 4c0a9323-5329-0410-9bdc-e9ce6186880e
the server rejected a crash report, by changing the return value from a
boolean to a tri-state enum.
Fixes issue #101. Reviewed by mmentovai.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@99 4c0a9323-5329-0410-9bdc-e9ce6186880e
- Generate local symbol file for module
- Output minidump report in a format similar to Apple's crash reporter
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@93 4c0a9323-5329-0410-9bdc-e9ce6186880e
Summary of this patch:
* It adds a new wstring* parameter to the end of both
SendCrashReport() and HTTPUpload::SendRequest(), which can be NULL.
* If the request isn't successful, the result parameter isn't touched.
* It adds HTTPUpload::UTF8ToWide() to allow the response to be
returned as a wstring,
* It changes the return value of SendRequest (and by extension,
SendCrashReport) so that if the size of the response body isn't
exactly the same as the value given in the Content-Length header, the
return value is false (in addition to the previous semantics).
* It also updates symupload.cc to account for the new parameter in
SendRequest().
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@81 4c0a9323-5329-0410-9bdc-e9ce6186880e
- Provide an optional filter callback that gets triggered before attempting
to write a dump, to give client code a chance to refuse handling early
in the process.
- Allow exceptions that are unhandled by Airbag (due to filter callback or
dump callback return value, or failure to write a dump) to be passed to the
previous handler or to the system.
- In order to pass exceptions unhandled by the topmost Airbag handler to
lower handlers, fix up the stacking of ExceptionHandler objects, and give
each ExceptionHandler object its own thread (like the Mac implementation)
to avoid deadlock.
- Provide a dump_path argument to callbacks, as requested by developers and
already implemented in the Mac handler.
- Avoid calling c_str in exception handler code (#90).
http://groups.google.com/group/airbag-dev/browse_thread/thread/4771825ced38a84c
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@79 4c0a9323-5329-0410-9bdc-e9ce6186880e
- Interface change: the "guid" and "age" parameters supplied to a symbol
server by symupload have been merged into "debug_identifier". Some
other parameters have had their names changed. Additional code_file,
os, and cpu parameters have been added.
- Interface change: the format of the MODULE line at the top of dumped .sym
files has changed slightly. The fields used for uuid and age have
merged into a debug_identifier-type field.
- debug_identifier is formatted the same way as CodeModule::debug_identifier
for ease of server-side processing.
http://groups.google.com/group/airbag-dev/browse_thread/thread/8022f504cf01f994
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@77 4c0a9323-5329-0410-9bdc-e9ce6186880e
- Introduces a standard API for dealing with modules. MinidumpModule
is now a concrete implementation of this API. Code may interact with
single modules using the CodeModule interface, and collections of
modules using its container, the CodeModules interface.
- CodeModule is used directly by SymbolSupplier implementations and
SourceLineResolver. Reliance on the specific implementation in
MinidumpModule has been eliminated.
- Module lists are now added to ProcessState objects. Module references
in each stack frame are now pointers to objects in these module lists.
- The sample minidump_stackwalk tool prints the module list after printing
all threads' stacks.
http://groups.google.com/group/airbag-dev/browse_frm/thread/a9c0550edde54cf8
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@74 4c0a9323-5329-0410-9bdc-e9ce6186880e
