A previous commit changed the record encryption function
`ssl_encrypt_buf` to compute the MAC in a temporary buffer
and copying the relevant part of it (which is strictly smaller
if the truncated HMAC extension is used) to the outgoing message
buffer. However, the change was only made in case Encrypt-Then-MAC
was enabled, but not in case of MAC-Then-Encrypt. While this
doesn't constitute a problem, for the sake of uniformity this
commit changes `ssl_encrypt_buf` to compute the MAC in a temporary
buffer in this case, too.
The function `mbedtls_rsa_complete` is supposed to guarantee that
RSA operations will complete without failure. In contrast, it does
not ensure consistency of parameters, which is the task of the
checking functions `rsa_check_pubkey` and `rsa_check_privkey`.
Previously, the maximum allowed size of the RSA modulus was checked
in `mbedtls_rsa_check_pubkey`. However, exceeding this size would lead
to failure of some RSA operations, hence this check belongs to
`mbedtls_rsa_complete` rather than `mbedtls_rsa_check_pubkey`.
This commit moves it accordingly.
The function `pk_get_rsapubkey` originally performed some basic
sanity checks (e.g. on the size of public exponent) on the parsed
RSA public key by a call to `mbedtls_rsa_check_pubkey`.
This check was dropped because it is not possible to thoroughly
check full parameter sanity (i.e. that (-)^E is a bijection on Z/NZ).
Still, for the sake of not silently changing existing behavior,
this commit puts back the call to `mbedtls_rsa_check_pubkey`.
- Adapt the change in all.sh to the new keep-going mode
- Restore alphabetical order of configuration flags for
alternative implementations in config.h and rebuild
library/version_features.c
`mbedtls_rsa_deduce_primes` implicitly casts the result of a call to
`mbedtls_mpi_lsb` to a `uint16_t`. This is safe because of the size
of MPI's used in the library, but still may have compilers complain
about it. This commit makes the cast explicit.
Conflict resolution: additions in the same places as
upstream-public/pr/865, both adding into lexicographically sorted
lists, resolved by taking the additions in lexicographic order.
* development:
Timing self test: shorten redundant tests
Timing self test: increased duration
Timing self test: increased tolerance
Timing unit tests: more protection against infinite loops
Unit test for mbedtls_timing_hardclock
New timing unit tests
selftest: allow excluding a subset of the tests
selftest: allow running a subset of the tests
selftest: refactor to separate the list of tests from the logic
Timing self test: print some diagnosis information
mbedtls_timing_get_timer: don't use uninitialized memory
timing interface documentation: minor clarifications
Timing: fix mbedtls_set_alarm(0) on Unix/POSIX
* public/pr/1136:
Timing self test: shorten redundant tests
Timing self test: increased duration
Timing self test: increased tolerance
Timing unit tests: more protection against infinite loops
Unit test for mbedtls_timing_hardclock
New timing unit tests
selftest: allow excluding a subset of the tests
selftest: allow running a subset of the tests
selftest: refactor to separate the list of tests from the logic
Timing self test: print some diagnosis information
mbedtls_timing_get_timer: don't use uninitialized memory
timing interface documentation: minor clarifications
Timing: fix mbedtls_set_alarm(0) on Unix/POSIX
1. Surround the generate keys with
`#if ! defined(MBEDTLS_CMAC_ALT) || defined(MBEDTLS_SELF_TEST)`
to resolve build issue when `MBEDTLS_SELF_TEST` is defined for
alternative CMAC as well
2. Update ChangeLog
Increase the duration of the self test, otherwise it tends to fail on
a busy machine even with the recently upped tolerance. But run the
loop only once, it's enough for a simple smoke test.
mbedtls_timing_self_test fails annoyingly often when running on a busy
machine such as can be expected of a continous integration system.
Increase the tolerances in the delay test, to reduce the chance of
failures that are only due to missing a deadline on a busy machine.
Print some not-very-nice-looking but helpful diagnosis information if
the timing selftest fails. Since the failures tend to be due to heavy
system load that's hard to reproduce, this information is necessary to
understand what's going on.
mbedtls_timing_get_timer with reset=1 is called both to initialize a
timer object and to reset an already-initialized object. In an
initial call, the content of the data structure is indeterminate, so
the code should not read from it. This could crash if signed overflows
trap, for example.
As a consequence, on reset, we can't return the previously elapsed
time as was previously done on Windows. Return 0 as was done on Unix.
The POSIX/Unix implementation of mbedtls_set_alarm did not set the
mbedtls_timing_alarmed flag when called with 0, which was inconsistent
with what the documentation implied and with the Windows behavior.
* restricted/pr/403:
Correct record header size in case of TLS
Don't allocate space for DTLS header if DTLS is disabled
Improve debugging output
Adapt ChangeLog
Add run-time check for handshake message size in ssl_write_record
Add run-time check for record content size in ssl_encrypt_buf
Add compile-time checks for size of record content and payload
* development:
Don't split error code description across multiple lines
Register new error code in error.h
Move deprecation to separate section in ChangeLog
Extend scope of ERR_RSA_UNSUPPORTED_OPERATION error code
Adapt RSA test suite
Adapt ChangeLog
Deprecate usage of RSA primitives with wrong key type
* restricted/pr/397:
Don't split error code description across multiple lines
Register new error code in error.h
Move deprecation to separate section in ChangeLog
Extend scope of ERR_RSA_UNSUPPORTED_OPERATION error code
Adapt RSA test suite
Adapt ChangeLog
Deprecate usage of RSA primitives with wrong key type
In a previous PR (Fix heap corruption in implementation of truncated HMAC
extension #425) the place where MAC is computed was changed from the end of
the SSL I/O buffer to a local buffer (then (part of) the content of the local
buffer is either copied to the output buffer of compare to the input buffer).
Unfortunately, this change was made only for TLS 1.0 and later, leaving SSL
3.0 in an inconsistent state due to ssl_mac() still writing to the old,
hard-coded location, which, for MAC verification, resulted in later comparing
the end of the input buffer (containing the computed MAC) to the local buffer
(uninitialised), most likely resulting in MAC verification failure, hence no
interop (even with ourselves).
This commit completes the move to using a local buffer by using this strategy
for SSL 3.0 too. Fortunately ssl_mac() was static so it's not a problem to
change its signature.
Fix missing definition of mbedtls_zeroize when MBEDTLS_FS_IO is
disabled in the configuration.
Introduced by e7707228b4
Merge remote-tracking branch 'upstream-public/pr/1062' into development
In case truncated HMAC must be used but the Mbed TLS peer hasn't been updated
yet, one can use the compile-time option MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT to
temporarily fall back to the old, non-compliant implementation of the truncated
HMAC extension.
The truncated HMAC extension as described in
https://tools.ietf.org/html/rfc6066.html#section-7 specifies that when truncated
HMAC is used, only the HMAC output should be truncated, while the HMAC key
generation stays unmodified. This commit fixes Mbed TLS's behavior of also
truncating the key, potentially leading to compatibility issues with peers
running other stacks than Mbed TLS.
Details:
The keys for the MAC are pieces of the keyblock that's generated from the
master secret in `mbedtls_ssl_derive_keys` through the PRF, their size being
specified as the size of the digest used for the MAC, regardless of whether
truncated HMAC is enabled or not.
/----- MD size ------\ /------- MD size ----\
Keyblock +----------------------+----------------------+------------------+---
now | MAC enc key | MAC dec key | Enc key | ...
(correct) +----------------------+----------------------+------------------+---
In the previous code, when truncated HMAC was enabled, the HMAC keys
were truncated to 10 bytes:
/-10 bytes-\ /-10 bytes-\
Keyblock +-------------+-------------+------------------+---
previously | MAC enc key | MAC dec key | Enc key | ...
(wrong) +-------------+-------------+------------------+---
The reason for this was that a single variable `transform->maclen` was used for
both the keysize and the size of the final MAC, and its value was reduced from
the MD size to 10 bytes in case truncated HMAC was negotiated.
This commit fixes this by introducing a temporary variable `mac_key_len` which
permanently holds the MD size irrespective of the presence of truncated HMAC,
and using this temporary to obtain the MAC key chunks from the keyblock.
Previously, MAC validation for an incoming record proceeded as follows:
1) Make a copy of the MAC contained in the record;
2) Compute the expected MAC in place, overwriting the presented one;
3) Compare both.
This resulted in a record buffer overflow if truncated MAC was used, as in this
case the record buffer only reserved 10 bytes for the MAC, but the MAC
computation routine in 2) always wrote a full digest.
For specially crafted records, this could be used to perform a controlled write of
up to 6 bytes past the boundary of the heap buffer holding the record, thereby
corrupting the heap structures and potentially leading to a crash or remote code
execution.
This commit fixes this by making the following change:
1) Compute the expected MAC in a temporary buffer that has the size of the
underlying message digest.
2) Compare to this to the MAC contained in the record, potentially
restricting to the first 10 bytes if truncated HMAC is used.
A similar fix is applied to the encryption routine `ssl_encrypt_buf`.
* development: (30 commits)
update README file (#1144)
Fix typo in asn1.h
Improve leap year test names in x509parse.data
Correctly handle leap year in x509_date_is_valid()
Renegotiation: Add tests for SigAlg ext parsing
Parse Signature Algorithm ext when renegotiating
Minor style fix
config.pl get: be better behaved
config.pl get: don't rewrite config.h; detect write errors
Fixed "config.pl get" for options with no value
Fix typo and bracketing in macro args
Ensure failed test_suite output is sent to stdout
Remove use of GNU sed features from ssl-opt.sh
Fix typos in ssl-opt.sh comments
Add ssl-opt.sh test to check gmt_unix_time is good
Extend ssl-opt.h so that run_test takes function
Always print gmt_unix_time in TLS client
Restored note about using minimum functionality in makefiles
Note in README that GNU make is required
Fix changelog for ssl_server2.c usage fix
...
This commit fixes a comparison of ssl_session->encrypt_then_mac against the
ETM-unrelated constant MBEDTLS_SSL_EXTENDED_MS_DISABLED. Instead,
MBEDTLS_SSL_ETM_DISABLED should be used.
The typo is has no functional effect since both constants have the same value 0.
Remove a check introduced in the previous buffer overflow fix with keys of
size 8N+1 which the subsequent fix for buffer start calculations made
redundant.
Added a changelog entry for the buffer start calculation fix.
For a key of size 8N+1, check that the first byte after applying the
public key operation is 0 (it could have been 1 instead). The code was
incorrectly doing a no-op check instead, which led to invalid
signatures being accepted. Not a security flaw, since you would need the
private key to craft such an invalid signature, but a bug nonetheless.
The check introduced by the previous security fix was off by one. It
fixed the buffer overflow but was not compliant with the definition of
PSS which technically led to accepting some invalid signatures (but
not signatures made without the private key).
Fix buffer overflow in RSA-PSS signature verification when the hash is
too large for the key size. Found by Seth Terashima, Qualcomm.
Added a non-regression test and a positive test with the smallest
permitted key size for a SHA-512 hash.
The function mbedtls_ecp_gen_keypair_base did not wipe the stack buffer used to
hold the private exponent before returning. This commit fixes this by not using
a stack buffer in the first place but instead calling mpi_fill_random directly
to acquire the necessary random MPI.
This commit modifies mpi_read_binary to always allocate the minimum number of
limbs required to hold the entire buffer provided to the function, regardless of
its content. Previously, leading zero bytes in the input data were detected and
used to reduce memory footprint and time, but this non-constant behavior turned
out to be non-tolerable for the cryptographic applications this function is used
for.
Previously, if `MBEDTLS_SSL_RENEGOTIATION` was disabled, incoming handshake
messages in `mbedtls_ssl_read` (expecting application data) lead to the
connection being closed. This commit fixes this, restricting the
`MBEDTLS_SSL_RENEGOTIATION`-guard to the code-paths responsible for accepting
renegotiation requests and aborting renegotiation attempts after too many
unexpected records have been received.
Signature algorithm extension was skipped when renegotiation was in
progress, causing the signature algorithm not to be known when
renegotiating, and failing the handshake. Fix removes the renegotiation
step check before parsing the extension.
As the optional RSA parameters DP, DQ and QP are effectively discarded (they are only considered for their length to
ensure that the key fills the entire buffer), it is not necessary to read them into separate MPI's.
The number of loop iterations per candidate in `mbedtls_deduce_primes` was off
by one. This commit corrects this and removes a toy non-example from the RSA
test suite, as it seems difficult to have the function fail on small values of N
even if D,E are corrupted.
Signature algorithm extension was skipped when renegotiation was in
progress, causing the signature algorithm not to be known when
renegotiating, and failing the handshake. Fix removes the renegotiation
step check before parsing the extension.
This commit splits off the RSA helper functions into separate headers and
compilation units to have a clearer separation of the public RSA interface,
intended to be used by end-users, and the helper functions which are publicly
provided only for the benefit of designers of alternative RSA implementations.
1) move the change into Features from Changes, in the changLog
2) Change the feature alternative configuration MBEDTLS_ECDH_ALT
definition to function alternative defintions
MBEDTLS_ECDH_COMPUTE_SHARED_ALT and MBEDTLS_ECDH_GEN_PUBLIC_ALT
1) update ChangLog to have new feature in Features instead of Changes
2) Change MBEDTLS_ECDSA_ALT to function specific alternative definitions:
MBEDTLS_ECDSA_SIGN_ALT, MBEDTLS_ECDSA_VERIFY_ALT and MBEDTLS_ECDSA_GENKEY_ALT
It is not necessary to pass a CSPRNG to `mbedtls_rsa_deduce_moduli`, as there
exist well-working static strategies, and even if a PRNG is preferred, a
non-secure one would be sufficient.
Further, the implementation is changed to use a static strategy for the choice
of candidates which according to some benchmarks even performs better than the
previous one using random candidate choices.
Change ssl_parse_server_hello() so that the parsed first four random
bytes from the ServerHello message are printed by the TLS client as
a Unix timestamp regardless of whether MBEDTLS_DEBUG_C is defined. The
debug message will only be printed if debug_level is 3 or higher.
Unconditionally enabling the debug print enabled testing of this value.
Change ssl_parse_server_hello() so that the parsed first four random
bytes from the ServerHello message are printed by the TLS client as
a Unix timestamp regardless of whether MBEDTLS_DEBUG_C is defined. The
debug message will only be printed if debug_level is 3 or higher.
Unconditionally enabling the debug print enabled testing of this value.
Further, state explicitly that wrong key types need not be supported by alternative RSA implementations, and that those
may instead return the newly introduced error code MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION.
This commit returns to using constant macros instead of global variables for the DHM group constants. Further, macros
providing the binary encoding of the primes from RFC 3526 and RFC 7919 are added. The hex-string macros are deprecated.
This commit modifies the PKCS1 v1.5 signature verification function `mbedtls_rsa_rsassa_pkcs1_v15_verify` to prepare the
expected PKCS1-v1.5-encoded hash using the function also used by the signing routine `mbedtls_rsa_rsassa_pkcs1_v15_sign`
and comparing it to the provided byte-string afterwards. This comes at the benefits of (1) avoiding any error-prone
parsing, (2) removing the dependency of the RSA module on the ASN.1 parsing module, and (3) reducing code size.
This commit moves the code preparing PKCS1 v1.5 encoded hashes from `mbedtls_rsa_rsassa_pkcs1_v15_sign` to a separate
non-public function `rsa_rsassa_pkcs1_v15_encode`. This code-path will then be re-used by the signature verification function
`mbetls_rsa_rsassa_pkcs1_v15_verify` in a later commit.
Original intention was to be allowed to perform in-place operations like changing the byte-order before importing
parameters into an HSM. Now a copy is needed in this case, but there's no more danger of a user expecting the arguments
to be left untouched.
State explicitly that `pk_parse_pkcs8_undencrypted_der` and `pk_parse_key_pkcs8_encrypted_der` are not responsible for
zeroizing and freeing the provided key buffer.
This commit changes the implementation of `mbedtls_rsa_get_len` to return
`ctx->len` instead of always re-computing the modulus' byte-size via
`mbedtls_mpi_size`.
Although the variable ret was initialised to an error, the
MBEDTLS_MPI_CHK macro was overwriting it. Therefore it ended up being
0 whenewer the bignum computation was successfull and stayed 0
independently of the actual check.
This commit renames the test-only flag MBEDTLS_ENTROPY_HAVE_STRONG to ENTROPY_HAVE_STRONG to make it more transparent
that it's an internal flag, and also to content the testscript tests/scripts/check-names.pl which previously complained
about the macro occurring in a comment in `entropy.c` without being defined in a library file.
This commit removes extension-writing code for X.509 non-v3 certificates from
mbedtls_x509write_crt_der. Previously, even if no extensions were present an
empty sequence would have been added.
Fix compilation error on Mingw32 when `_TRUNCATE` is defined. Use
`_TRUNCATE` only if `__MINGW32__` not defined. Fix suggested by
Thomas Glanzmann and Nick Wilson on issue #355
The stack buffer used to hold the decrypted key in pk_parse_pkcs8_encrypted_der
was statically sized to 2048 bytes, which is not enough for DER encoded 4096bit
RSA keys.
This commit resolves the problem by performing the key-decryption in-place,
circumventing the introduction of another stack or heap copy of the key.
There are two situations where pk_parse_pkcs8_encrypted_der is invoked:
1. When processing a PEM-encoded encrypted key in mbedtls_pk_parse_key.
This does not need adaption since the PEM context used to hold the decoded
key is already constructed and owned by mbedtls_pk_parse_key.
2. When processing a DER-encoded encrypted key in mbedtls_pk_parse_key.
In this case, mbedtls_pk_parse_key calls pk_parse_pkcs8_encrypted_der with
the buffer provided by the user, which is declared const. The commit
therefore adds a small code paths making a copy of the keybuffer before
calling pk_parse_pkcs8_encrypted_der.
This commit adds the function mbedtls_rsa_validate_crt for validating a set of CRT parameters. The function
mbedtls_rsa_check_crt is simplified accordingly.
Primality testing is guarded by the configuration flag MBEDTLS_GENPRIME and used in the new RSA helper functions. This
commit adds a corresponding preprocessor directive.
Alternative RSA implementations can be provided by defining MBEDTLS_RSA_ALT in
config.h, defining an mbedtls_rsa_context struct in a new file rsa_alt.h and
re-implementing the RSA interface specified in rsa.h.
Through the previous reworkings, the adherence to the interface is the only
implementation obligation - in particular, implementors are free to use a
different layout for the RSA context structure.
There were preprocessor directives in pk.c and pk_wrap.c that cheked
whether the bit length of size_t was greater than that of unsigned int.
However, the check relied on the MBEDTLS_HAVE_INT64 macro being defined
which is not directly related to size_t. This might result in errors in
some platforms. This change modifies the check to use the macros
SIZE_MAX and UINT_MAX instead making the code more robust.
As noted in #557, several functions use 'index' resp. 'time'
as parameter names in their declaration and/or definition, causing name
conflicts with the functions in the C standard library of the same
name some compilers warn about.
This commit renames the arguments accordingly.
Modify the function mbedtls_x509_csr_parse_der() so that it checks the
parsed CSR version integer before it increments the value. This prevents
a potential signed integer overflow, as these have undefined behaviour
in the C standard.
Rename the macro MBEDTLS_PLATFORM_SETUP_ALT to
MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT to make the name more descriptive
as this macro enables/disables both functions.
Add the following two functions to allow platform setup and teardown
operations for the full library to be hooked in:
* mbedtls_platform_setup()
* mbedtls_platform_teardown()
An mbedtls_platform_context C structure is also added and two internal
functions that are called by the corresponding setup and teardown
functions above:
* mbedtls_internal_platform_setup()
* mbedtls_internal_plartform_teardown()
Finally, the macro MBEDTLS_PLATFORM_SETUP_ALT is also added to allow
mbedtls_platform_context and internal function to be overriden by the
user as needed for a platform.
The previous commit bd5ceee484f201b90a384636ba12de86bd330cba removed
the definition of the global constants
- mbedtls_test_ca_crt_rsa_len,
- mbedtls_test_cli_crt_rsa_len,
- mbedtls_test_ca_crt_rsa, and
- mbedtls_test_cli_crt_rsa.
This commit restores these to maintain ABI compatibility.
Further, it was noticed that without SHA256_C being enabled the
previous code failed to compile because because the SHA1 resp. SHA256
certificates were only defined when the respective SHAXXX_C options
were set, but the emission of the global variable mbedtls_test_ca_crt
was unconditionally defined through the SHA256
certificate. Previously, the RSA SHA1 certificate was unconditionally
defined and used for that.
As a remedy, this commit makes sure some RSA certificate is defined
and exported through the following rule:
1. If SHA256_C is active, define an RSA SHA256 certificate and export
it as mbedtls_test_ca_crt. Also, define SHA1 certificates only if
SHA1_C is set.
2. If SHA256_C is not set, always define SHA1 certificate and export
it as mbedtls_test_ca_crt.
Fix a resource leak on windows platform, in mbedtls_x509_crt_parse_path,
in case a failure. when an error occurs, goto cleanup, and free the
resource, instead of returning error code immediately.
Protecting the ECP hardware acceleratior with mutexes is inconsistent with the
philosophy of the library. Pre-existing hardware accelerator interfaces
leave concurrency support to the underlying platform.
Fixes#863
Modify the function mbedtls_x509_csr_parse_der() so that it checks the
parsed CSR version integer before it increments the value. This prevents
a potential signed integer overflow, as these have undefined behaviour
in the C standard.
The RSA key generation test needs strong entropy to succeed. This commit captures the presence of a strong entropy
source in a preprocessor flag and only runs the key generation test if that flag is set.
Rename the macro MBEDTLS_PLATFORM_SETUP_ALT to
MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT to make the name more descriptive
as this macro enables/disables both functions.
Add the following two functions to allow platform setup and teardown
operations for the full library to be hooked in:
* mbedtls_platform_setup()
* mbedtls_platform_teardown()
An mbedtls_platform_context C structure is also added and two internal
functions that are called by the corresponding setup and teardown
functions above:
* mbedtls_internal_platform_setup()
* mbedtls_internal_plartform_teardown()
Finally, the macro MBEDTLS_PLATFORM_SETUP_ALT is also added to allow
mbedtls_platform_context and internal function to be overriden by the
user as needed for a platform.
The previous commit bd5ceee484f201b90a384636ba12de86bd330cba removed
the definition of the global constants
- mbedtls_test_ca_crt_rsa_len,
- mbedtls_test_cli_crt_rsa_len,
- mbedtls_test_ca_crt_rsa, and
- mbedtls_test_cli_crt_rsa.
This commit restores these to maintain ABI compatibility.
Further, it was noticed that without SHA256_C being enabled the
previous code failed to compile because because the SHA1 resp. SHA256
certificates were only defined when the respective SHAXXX_C options
were set, but the emission of the global variable mbedtls_test_ca_crt
was unconditionally defined through the SHA256
certificate. Previously, the RSA SHA1 certificate was unconditionally
defined and used for that.
As a remedy, this commit makes sure some RSA certificate is defined
and exported through the following rule:
1. If SHA256_C is active, define an RSA SHA256 certificate and export
it as mbedtls_test_ca_crt. Also, define SHA1 certificates only if
SHA1_C is set.
2. If SHA256_C is not set, always define SHA1 certificate and export
it as mbedtls_test_ca_crt.
Fix a resource leak on windows platform, in mbedtls_x509_crt_parse_path,
in case a failure. when an error occurs, goto cleanup, and free the
resource, instead of returning error code immediately.
Protecting the ECP hardware acceleratior with mutexes is inconsistent with the
philosophy of the library. Pre-existing hardware accelerator interfaces
leave concurrency support to the underlying platform.
Fixes#863
If we didn't walk the whole chain, then there may be any kind of errors in the
part of the chain we didn't check, so setting all flags looks like the safe
thing to do.
This change moves the calls to mbedtls_sha256_starts() and
mbedtls_sha512_starts() out of the mbedtls_entropy_init() function as
these now have return codes which need to be checked.
This patch modifies the entropy.c module to ensure that the sha256 and
sha512 contexts are correctly initialised and freed instead of skipping
these calls or simply zeroizing with memset() or mbedtls_zeroize().
This is important as the sha contexts might otherwise leak memory or
other resources, and even more so in the context of hardware
accelerators where the configuration of the device might be done in the
init and free calls.
This patch modifies the internal md context structure in md_wrap.c to
add return values to the function pointers. This enables us to use the
new API in the corresponding MD modules so that failures can be
found at any point in an MD computation.
The following function calls are being deprecated to introduce int
return values.
* mbedtls_sha512()
* mbedtls_sha512_starts()
* mbedtls_sha512_update()
* mbedtls_sha512_finish()
* mbedtls_sha512_process()
The return codes can be used to return error values. This is important
when using hardware accelerators.
The following function calls are being deprecated to introduce int
return values.
* mbedtls_sha256()
* mbedtls_sha256_starts()
* mbedtls_sha256_update()
* mbedtls_sha256_finish()
* mbedtls_sha256_process()
The return codes can be used to return error values. This is important
when using hardware accelerators.
The following function calls are being deprecated to introduce int
return values.
* mbedtls_ripemd160()
* mbedtls_ripemd160_starts()
* mbedtls_ripemd160_update()
* mbedtls_ripemd160_finish()
* mbedtls_ripemd160_process()
The return codes can be used to return error values. This is important
when using hardware accelerators.
The following function calls are being deprecated to introduce int
return values.
* mbedtls_md5()
* mbedtls_md5_starts()
* mbedtls_md5_update()
* mbedtls_md5_finish()
* mbedtls_md5_process()
The return codes can be used to return error values. This is important
when using hardware accelerators.
The following function calls are being deprecated to introduce int
return values.
* mbedtls_md4()
* mbedtls_md4_starts()
* mbedtls_md4_update()
* mbedtls_md4_finish()
* mbedtls_md4_process()
The return codes can be used to return error values. This is important
when using hardware accelerators.
The following function calls are being deprecated to introduce int
return values.
* mbedtls_md2()
* mbedtls_md2_starts()
* mbedtls_md2_update()
* mbedtls_md2_finish()
* mbedtls_md2_process()
The return codes can be used to return error values. This is important
when using hardware accelerators.
The following function calls are being deprecated to introduce int
return values.
* mbedtls_sha1()
* mbedtls_sha1_starts()
* mbedtls_sha1_update()
* mbedtls_sha1_finish()
* mbedtls_sha1_process()
The return codes can be used to return error values. This is important
when using hardware accelerators.
The check `if( *p + n > end )` in `ssl_parse_client_psk_identity` is
unsafe because `*p + n` might overflow, thus bypassing the check. As
`n` is a user-specified value up to 65K, this is relevant if the
library happens to be located in the last 65K of virtual memory.
This commit replaces the check by a safe version.
This patch modifies the function mbedtls_gcm_self_test() function to
ensure that AES-GCM-192 tests are only run if the key size is supported
by the available implementation. This is useful when using
MBEDTLS_AES_ALT as some hardware crypto accelerators might not support
AES-192.
This patch modifies the function mbedtls_aes_selftest() function to
ensure that AES-192 tests are only run if the key size is supported by
the available implementation. This is useful when using MBEDTLS_AES_ALT
as some hardware crypto accelerators might not support AES-192.
* restricted/iotssl-1398:
Add ChangeLog entry
Ensure application data records are not kept when fully processed
Add hard assertion to mbedtls_ssl_read_record_layer
Fix mbedtls_ssl_read
Simplify retaining of messages for future processing
This commit fixes the following case: If a client is both expecting a
SERVER_HELLO and has an application data record that's partially
processed in flight (that's the situation the client gets into after
receiving a ServerHelloRequest followed by ApplicationData), a
subsequent call to mbedtls_ssl_read will set keep_current_message = 1
when seeing the unexpected application data, but not reset it to 0
after the application data has been processed. This commit fixes this.
It also documents and suggests how the problem might be solved in a
more structural way on the long run.
This commit adds a hard assertion to mbedtls_ssl_read_record_layer
triggering if both ssl->in_hslen and ssl->in_offt are not 0. This
should never happen, and if it does, there's no sensible way of
telling whether the previous message was a handshake or an application
data message.
There are situations in which it is not clear what message to expect
next. For example, the message following the ServerHello might be
either a Certificate, a ServerKeyExchange or a CertificateRequest. We
deal with this situation in the following way: Initially, the message
processing function for one of the allowed message types is called,
which fetches and decodes a new message. If that message is not the
expected one, the function returns successfully (instead of throwing
an error as usual for unexpected messages), and the handshake
continues to the processing function for the next possible message. To
not have this function fetch a new message, a flag in the SSL context
structure is used to indicate that the last message was retained for
further processing, and if that's set, the following processing
function will not fetch a new record.
This commit simplifies the usage of this message-retaining parameter
by doing the check within the record-fetching routine instead of the
specific message-processing routines. The code gets cleaner this way
and allows retaining messages to be used in other situations as well
without much effort. This will be used in the next commits.
This commit adds four tests to tests/ssl-opt.sh:
(1) & (2): Check behaviour of optional/required verification when the
trusted CA chain is empty.
(3) & (4): Check behaviour of optional/required verification when the
client receives a server certificate with an unsupported curve.
This commit changes the behaviour of mbedtls_ssl_parse_certificate
to make the two authentication modes MBEDTLS_SSL_VERIFY_REQUIRED and
MBEDTLS_SSL_VERIFY_OPTIONAL be in the following relationship:
Mode == MBEDTLS_SSL_VERIFY_REQUIRED
<=> Mode == MBEDTLS_SSL_VERIFY_OPTIONAL + check verify result
Also, it changes the behaviour to perform the certificate chain
verification even if the trusted CA chain is empty. Previously, the
function failed in this case, even when using optional verification,
which was brought up in #864.
* gilles/IOTSSL-1330/development:
Changelog entry for the bug fixes
SSLv3: when refusing renegotiation, stop processing
Ignore failures when sending fatal alerts
Cleaned up double variable declaration
Code portability fix
Added changelog entry
Send TLS alerts in many more cases
Skip all non-executables in run-test-suites.pl
SSL tests: server requires auth, client has no certificate
Balanced braces across preprocessor conditionals
Support setting the ports on the command line
By default, keep allowing SHA-1 in key exchange signatures. Disabling
it causes compatibility issues, especially with clients that use
TLS1.2 but don't send the signature_algorithms extension.
SHA-1 is forbidden in certificates by default, since it's vulnerable
to offline collision-based attacks.
In the TLS test client, allow SHA-1 as a signature hash algorithm.
Without this, the renegotation tests failed.
A previous commit had allowed SHA-1 via the certificate profile but
that only applied before the initial negotiation which includes the
signature_algorithms extension.
Default to forbidding the use of SHA-1 in TLS where it is unsafe: for
certificate signing, and as the signature hash algorithm for the TLS
1.2 handshake signature. SHA-1 remains allowed in HMAC-SHA-1 in the
XXX_SHA ciphersuites and in the PRF for TLS <= 1.1.
For easy backward compatibility for use in controlled environments,
turn on the MBEDTLS_TLS_DEFAULT_ALLOW_SHA1 compiled-time option.
* hanno/sig_hash_compatibility:
Improve documentation
Split long lines
Remember suitable hash function for any signature algorithm.
Introduce macros and functions to characterize certain ciphersuites.
Add missing return code checks in the functions pem_des_decrypt(),
pem_3des_decrypt() and pem_aes_decrypt() so that the calling function
mbedtls_pem_read_buffer() is notified of errors reported by the crypto
primitives AES, DES and 3DES.
Fixed a bug in ssl_srv.c when parsing TLS_FALLBACK_SCSV in the
ciphersuite list that caused it to miss it sometimes. Reported by Hugo
Leisink as issue #810. Fix initially by @andreasag01; this commit
isolates the bug fix and adds a non-regression test.
This patch modifies the following 2 functions in the AES module to
change the return type from void to int:
* mbedtls_aes_encrypt() -> mbedtls_internal_aes_encrypt()
* mbedtls_aes_decrypt() -> mbedtls_internal_aes_decrypt()
This change is necessary to allow users of MBEDTLS_AES_ALT,
MBEDTLS_AES_DECRYPT_ALT and MBEDTLS_AES_ENCRYPT_ALT to return an error
code when replacing the default with their own implementation, e.g.
a hardware crypto accelerator.
The RSA private key functions rsa_rsaes_pkcs1_v15_decrypt and
rsa_rsaes_oaep_decrypt put sensitive data (decryption results) on the
stack. Wipe it before returning.
Thanks to Laurent Simon for reporting this issue.
The sliding window exponentiation algorithm is vulnerable to
side-channel attacks. As a countermeasure we add exponent blinding in
order to prevent combining the results of different measurements.
This commit handles the case when the Chinese Remainder Theorem is used
to accelerate the computation.
The sliding window exponentiation algorithm is vulnerable to
side-channel attacks. As a countermeasure we add exponent blinding in
order to prevent combining the results of fifferent measurements.
This commits handles the case when the Chinese Remainder Theorem is NOT
used to accelerate computations.
According to RFC5246 the server can indicate the known Certificate
Authorities or can constrain the aurhorisation space by sending a
certificate list. This part of the message is optional and if omitted,
the client may send any certificate in the response.
The previous behaviour of mbed TLS was to always send the name of all the
CAs that are configured as root CAs. In certain cases this might cause
usability and privacy issues for example:
- If the list of the CA names is longer than the peers input buffer then
the handshake will fail
- If the configured CAs belong to third parties, this message gives away
information on the relations to these third parties
Therefore we introduce an option to suppress the CA list in the
Certificate Request message.
Providing this feature as a runtime option comes with a little cost in
code size and advantages in maintenance and flexibility.
This commit changes `ssl_parse_signature_algorithms_ext` to remember
one suitable ( := supported by client and by our config ) hash
algorithm per signature algorithm.
It also modifies the ciphersuite checking function
`ssl_ciphersuite_match` to refuse a suite if there
is no suitable hash algorithm.
Finally, it adds the corresponding entry to the ChangeLog.
The routine `mbedtls_ssl_write_server_key_exchange` heavily depends on
what kind of cipher suite is active: some don't need a
ServerKeyExchange at all, some need (EC)DH parameters but no server
signature, some require both. Each time we want to restrict a certain
piece of code to some class of ciphersuites, it is guarded by a
lengthy concatentation of configuration checks determining whether at
least one of the relevant cipher suites is enabled in the config; on
the code level, it is guarded by the check whether one of these
cipher suites is the active one.
To ease readability of the code, this commit introduces several helper
macros and helper functions that can be used to determine whether a
certain class of ciphersuites (a) is active in the config, and
(b) contains the currently present ciphersuite.
With this commit the Elliptic Curve Point interface is rewised. Two
compile time options has been removed to simplify the interface and
the function names got a new prefix that indicates that these functions
are for internal use and not part of the public interface.
The intended use of the abstraction layer for Elliptic Curve Point
arithmetic is to enable using hardware cryptographic accelerators.
These devices are a shared resource and the driver code rarely provides
thread safety.
This commit adds mutexes to the abstraction layer to protect the device
in a multi-threaded environment.
The primary use case behind providing an abstraction layer to enable
alternative Elliptic Curve Point arithmetic implementation, is making
use of cryptographic acceleration hardware if it is present.
To provide thread safety for the hardware accelerator we need a mutex
to guard it.
The compile time macros enabling the initialisation and deinitialisation
in the alternative Elliptic Curve Point arithmetic implementation had
names that did not end with '_ALT' as required by check-names.sh.
This patch introduces some additional checks in the PK module for 64-bit
systems only. The problem is that the API functions in the PK
abstraction accept a size_t value for the hashlen, while the RSA module
accepts an unsigned int for the hashlen. Instead of silently casting
size_t to unsigned int, this change checks whether the hashlen overflows
an unsigned int and returns an error.
The test case was generated by modifying our signature code so that it
produces a 7-byte long padding (which also means garbage at the end, so it is
essential in to check that the error that is detected first is indeed the
padding rather than the final length check).
In many places in TLS handling, some code detects a fatal error, sends
a fatal alert message, and returns to the caller. If sending the alert
fails, then return the error that triggered the alert, rather than
overriding the return status. This effectively causes alert sending
failures to be ignored. Formerly the code was inconsistently sometimes
doing one, sometimes the other.
In general ignoring the alert is the right thing: what matters to the
caller is the original error. A typical alert failure is that the
connection is already closed.
One case which remains not handled correctly is if the alert remains
in the output buffer (WANT_WRITE). Then it won't be sent, or will be
truncated. We'd need to either delay the application error or record
the write buffering notice; to be done later.
When provided with an empty line, mpi_read_file causes a numeric
underflow resulting in a stack underflow. This commit fixes this and
adds some documentation to mpi_read_file.
The modular inversion function hangs when provided with the modulus 1. This commit refuses this modulus with a BAD_INPUT error code. It also adds a test for this case.
The TLS client and server code was usually closing the connection in
case of a fatal error without sending an alert. This commit adds
alerts in many cases.
Added one test case to detect that we send the alert, where a server
complains that the client's certificate is from an unknown CA (case
tracked internally as IOTSSL-1330).
Fix a buffer overflow when writting a string representation of an MPI
number to a buffer in hexadecimal. The problem occurs because hex
digits are written in pairs and this is not accounted for in the
calculation of the required buffer size when the number of digits is
odd.
When using ssl_cookie with MBEDTLS_THREADING_C, fix a resource leak caused by
initiating a mutex in mbedtls_ssl_cookie_free instead of freeing it.
Raised and fix suggested by lan Gillingham in the mbed TLS forum
Tracked in #771
The function ecp_mod_koblitz computed the space for the result of a
multiplication optimally for that specific case, but unfortunately
the function mbedtls_mpi_mul_mpi performs a generic, suboptimal
calculation and needs one more limb for the result. Since the result's
buffer is on the stack, the best case scenario is that the program
stops.
This only happened on 64 bit platforms.
Fixes#569
A heap overread might happen when parsing malformed certificates.
Reported by Peng Li and Yueh-Hsun Lin.
Refactoring the parsing fixes the problem. This commit applies the
relevant part of the OpenVPN contribution applied to mbed TLS 1.3
in commit 17da9dd829.
Fixes a regression introduced by an earlier commit that modified
x509_crt_verify_top() to ensure that valid certificates that are after past or
future valid in the chain are processed. However the change introduced a change
in behaviour that caused the verification flags MBEDTLS_X509_BADCERT_EXPIRED and
MBEDTLS_BADCERT_FUTURE to always be set whenever there is a failure in the
verification regardless of the cause.
The fix maintains both behaviours:
* Ensure that valid certificates after future and past are verified
* Ensure that the correct verification flags are set.
Modifies the function mbedtls_x509_crl_parse() to ensure that a CRL in PEM
format with trailing characters after the footer does not result in the
execution of an infinite loop.
Fix potential integer overflows in the function mbedtls_base64_decode().
This overflow would mainly be exploitable in 32-bit systems and could
cause buffer bound checks to be bypassed.
Fix potential integer overflows in the following functions:
* mbedtls_md2_update() to be bypassed and cause
* mbedtls_cipher_update()
* mbedtls_ctr_drbg_reseed()
This overflows would mainly be exploitable in 32-bit systems and could
cause buffer bound checks to be bypassed.
Fix an incorrect condition in ssl_check_ctr_renegotiate() that compared
64 bits of record counter instead of 48 bits as described in RFC 6347
Section 4.3.1. This would cause the function's return value to be
occasionally incorrect and the renegotiation routines to be triggered
at unexpected times.
This PR fixes a number of unused variable/function compilation warnings
that arise when using a config.h that does not define the macro
MBEDTLS_PEM_PARSE_C.
Fixes many typos, and errors in comments.
* Clarifies many comments
* Grammar correction in config.pl help text
* Removed comment about MBEDTLS_X509_EXT_NS_CERT_TYPE.
* Comment typo fix (Dont => Don't)
* Comment typo fix (assure => ensure)
* Comment typo fix (byes => bytes)
* Added citation for quoted standard
* Comment typo fix (one complement => 1's complement)
The is some debate about whether to prefer "one's complement", "ones'
complement", or "1's complement". The more recent RFCs related to TLS
(RFC 6347, RFC 4347, etc) use " 1's complement", so I followed that
convention.
* Added missing ")" in comment
* Comment alignment
* Incorrect comment after #endif
Fix an incorrect condition in ssl_check_ctr_renegotiate() that compared
64 bits of record counter instead of 48 bits as described in RFC 6347
Section 4.3.1. This would cause the function's return value to be
occasionally incorrect and the renegotiation routines to be triggered
at unexpected times.
This PR fixes a number of unused variable/function compilation warnings
that arise when using a config.h that does not define the macro
MBEDTLS_PEM_PARSE_C.
This change fixes a regression introduced by an earlier commit that
modified x509_crt_verify_top() to ensure that valid certificates
that are after past or future valid in the chain are processed. However
the change introduced a change in behaviour that caused the
verification flags MBEDTLS_X509_BADCERT_EXPIRED and
MBEDTLS_BADCERT_FUTURE to always be set whenever there is a failure in
the verification regardless of the cause.
The fix maintains both behaviours:
* Ensure that valid certificates after future and past are verified
* Ensure that the correct verification flags are set.
To do so, a temporary pointer to the first future or past valid
certificate is maintained while traversing the chain. If a truly valid
certificate is found then that one is used, otherwise if no valid
certificate is found and the end of the chain is reached, the program
reverts back to using the future or past valid certificate.
This patch modifies the function mbedtls_x509_crl_parse() to ensure
that a CRL in PEM format with trailing characters after the footer does
not result in the execution of an infinite loop.
Fix an incorrect condition in ssl_check_ctr_renegotiate() that compared
64 bits of record counter instead of 48 bits as described in RFC 6347
Section 4.3.1. This would cause the function's return value to be
occasionally incorrect and the renegotiation routines to be triggered
at unexpected times.
This PR fixes a number of unused variable/function compilation warnings
that arise when using a config.h that does not define the macro
MBEDTLS_PEM_PARSE_C.
Fixes many typos, and errors in comments.
* Clarifies many comments
* Grammar correction in config.pl help text
* Removed comment about MBEDTLS_X509_EXT_NS_CERT_TYPE.
* Comment typo fix (Dont => Don't)
* Comment typo fix (assure => ensure)
* Comment typo fix (byes => bytes)
* Added citation for quoted standard
* Comment typo fix (one complement => 1's complement)
The is some debate about whether to prefer "one's complement", "ones'
complement", or "1's complement". The more recent RFCs related to TLS
(RFC 6347, RFC 4347, etc) use " 1's complement", so I followed that
convention.
* Added missing ")" in comment
* Comment alignment
* Incorrect comment after #endif
