Now that do_ats_write() is entirely in control of whether to
generate a 32-bit PAR or a 64-bit PAR, we can make it use the
correct (complicated) condition for doing so.
Backports commit 1313e2d7e2cd8b21741e0cf542eb09dfc4188f79 from qemu
Currently get_phys_addr() and its various subfunctions return
a hard-coded fault status register value for translation
failures. This is awkward because FSR values these days may
be either long-descriptor format or short-descriptor format.
Worse, the right FSR type to use doesn't depend only on the
translation table being walked -- some cases, like fault
info reported to AArch32 EL2 for some kinds of ATS operation,
must be in long-descriptor format even if the translation
table being walked was short format. We can't get those cases
right with our current approach.
Provide fields in the ARMMMUFaultInfo struct which allow
get_phys_addr() to provide sufficient information for a caller to
construct an FSR value themselves, and utility functions which do
this for both long and short format FSR values, as a first step in
switching get_phys_addr() and its children to only returning the
failure cause in the ARMMMUFaultInfo struct.
Backports commit 1fa498fe0de979030bd1f481046e9f1c5574a584 from qemu
For M profile, we currently have an mmu index MNegPri for
"requested execution priority negative". This fails to
distinguish "requested execution priority negative, privileged"
from "requested execution priority negative, usermode", but
the two can return different results for MPU lookups. Fix this
by splitting MNegPri into MNegPriPriv and MNegPriUser, and
similarly for the Secure equivalent MSNegPri.
This takes us from 6 M profile MMU modes to 8, which means
we need to bump NB_MMU_MODES; this is OK since the point
where we are forced to reduce TLB sizes is 9 MMU modes.
(It would in theory be possible to stick with 6 MMU indexes:
{mpu-disabled,user,privileged} x {secure,nonsecure} since
in the MPU-disabled case the result of an MPU lookup is
always the same for both user and privileged code. However
we would then need to rework the TB flags handling to put
user/priv into the TB flags separately from the mmuidx.
Adding an extra couple of mmu indexes is simpler.)
Backports commit 62593718d77c06ad2b5e942727cead40775d2395 from qemu
WFI/E are often, but not always, 4 bytes long. When they are, we need to
set ARM_EL_IL_SHIFT in the syndrome register.
Pass the instruction length to HELPER(wfi), use it to decrement pc
appropriately and to pass an is_16bit flag to syn_wfx, which sets
ARM_EL_IL_SHIFT if needed.
Set dc->insn in both arm_tr_translate_insn and thumb_tr_translate_insn.
Backports commit 58803318e5a546b2eb0efd7a053ed36b6c29ae6f from qemu
Secure function return happens when a non-secure function has been
called using BLXNS and so has a particular magic LR value (either
0xfefffffe or 0xfeffffff). The function return via BX behaves
specially when the new PC value is this magic value, in the same
way that exception returns are handled.
Adjust our BX excret guards so that they recognize the function
return magic number as well, and perform the function-return
unstacking in do_v7m_exception_exit().
Backports commit d02a8698d7ae2bfed3b11fe5b064cb0aa406863b from qemu
Implement the security attribute lookups for memory accesses
in the get_phys_addr() functions, causing these to generate
various kinds of SecureFault for bad accesses.
The major subtlety in this code relates to handling of the
case when the security attributes the SAU assigns to the
address don't match the current security state of the CPU.
In the ARM ARM pseudocode for validating instruction
accesses, the security attributes of the address determine
whether the Secure or NonSecure MPU state is used. At face
value, handling this would require us to encode the relevant
bits of state into mmu_idx for both S and NS at once, which
would result in our needing 16 mmu indexes. Fortunately we
don't actually need to do this because a mismatch between
address attributes and CPU state means either:
* some kind of fault (usually a SecureFault, but in theory
perhaps a UserFault for unaligned access to Device memory)
* execution of the SG instruction in NS state from a
Secure & NonSecure code region
The purpose of SG is simply to flip the CPU into Secure
state, so we can handle it by emulating execution of that
instruction directly in arm_v7m_cpu_do_interrupt(), which
means we can treat all the mismatch cases as "throw an
exception" and we don't need to encode the state of the
other MPU bank into our mmu_idx values.
This commit doesn't include the actual emulation of SG;
it also doesn't include implementation of the IDAU, which
is a per-board way to specify hard-coded memory attributes
for addresses, which override the CPU-internal SAU if they
specify a more secure setting than the SAU is programmed to.
Backports commit 35337cc391245f251bfb9134f181c33e6375d6c1 from qemu
The exception-return magic values get some new bits in v8M, which
makes some bit definitions for them worthwhile.
We don't use the bit definitions for the switch on the low bits
which checks the return type for v7M, because this is defined
in the v7M ARM ARM as a set of valid values rather than via
per-bit checks.
Backports commit 4d1e7a4745c050f7ccac49a1c01437526b5130b5 from qemu
For M profile we must clear the exclusive monitor on reset, exception
entry and exception exit. We weren't doing any of these things; fix
this bug.
Backports commit dc3c4c14f0f12854dbd967be3486f4db4e66d25b from qemu
Define a new MachineClass field ignore_memory_transaction_failures.
If this is flag is true then the CPU will ignore memory transaction
failures which should cause the CPU to take an exception due to an
access to an unassigned physical address; the transaction will
instead return zero (for a read) or be ignored (for a write). This
should be set only by legacy board models which rely on the old
RAZ/WI behaviour for handling devices that QEMU does not yet model.
New board models should instead use "unimplemented-device" for all
memory ranges where the guest will attempt to probe for a device that
QEMU doesn't implement and a stub device is required.
We need this for ARM boards, where we're about to implement support for
generating external aborts on memory transaction failures. Too many
of our legacy board models rely on the RAZ/WI behaviour and we
would break currently working guests when their "probe for device"
code provoked an external abort rather than a RAZ.
Backports commit ed860129acd3fcd0b1e47884e810212aaca4d21b from qemu
Move the regime_is_secure() utility function to internals.h;
we are going to want to call it from translate.c.
Backports commit 61fcd69b0db268e7612b07fadc436b93def91768 from qemu
For external aborts, we will want to be able to specify the EA
(external abort type) bit in the syndrome field. Allow callers of
deliver_fault() to do that by adding a field to ARMMMUFaultInfo which
we use when constructing the syndrome values.
Backports commit c528af7aa64f159eb30b46e567b650c5440fc117 from qemu
In the ARM get_phys_addr() code, switch to using the MMUAccessType
enum and its MMU_* values rather than int and literal 0/1/2.
Backports commit 03ae85f858fc46495258a5dd4551fff2c34bd495 from qemu
The excnames[] array is defined in internals.h because we used
to use it from two different source files for handling logging
of AArch32 and AArch64 exception entry. Refactoring means that
it's now used only in arm_log_exception() in helper.c, so move
the array into that function.
Backports commit 2c4a7cc5afb1bfc1728a39abd951ddd7714c476e from qemu
Recent changes have added new EXCP_ values to ARM but forgot
to update the excnames[] array which is used to provide
human-readable strings when printing information about the
exception for debug logging. Add the missing entries, and
add a comment to the list of #defines to help avoid the mistake
being repeated in future.
Backports commit 32b81e620ea562d56ab2733421b5da1082b237a2 from qemu
The v7m CONTROL register bit 1 is SPSEL, which indicates
the stack being used. We were storing this information
not in v7m.control but in the separate v7m.other_sp
structure field. Unfortunately, the code handling reads
of the CONTROL register didn't take account of this, and
so if SPSEL was updated by an exception entry or exit then
a subsequent guest read of CONTROL would get the wrong value.
Using a separate structure field doesn't really gain us
anything in efficiency, so drop this unnecessary complexity
in favour of simply storing all the bits in v7m.control.
This is a migration compatibility break for M profile
CPUs only.
Backports commit abc24d86cc0364f402e438fae3acb14289b40734 from qemu
In BE32 mode, sub-word size watchpoints can fail to trigger because the
address of the access is adjusted in the opcode helpers before being
compared with the watchpoint registers. This patch reverses the address
adjustment before performing the comparison with the help of a new CPUClass
hook.
This version of the patch augments and tidies up comments a little.
Backports commit 40612000599e52e792d23c998377a0fa429c4036 from qemu
We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.
Backports commit fcf5ef2ab52c621a4617ebbef36bf43b4003f4c0 from qemu
2018-03-01 22:50:58 -05:00
Renamed from qemu/target-arm/internals.h (Browse further)
