When CPU vendor is AMD, the AMD feature alias bits on
CPUID[0x80000001].EDX are already automatically copied from CPUID[1].EDX
on x86_cpu_realizefn(). When CPU vendor is Intel, those bits are
reserved and should be zero. On either case, those bits shouldn't be set
in the CPU model table.
Backports commit 726a8ff68677d8d5fba17eb0ffb85076bfb598dc from qemu
Static properties require only 1 line of code, much simpler than the
existing code that requires writing new getters/setters.
As a nice side-effect, this fixes an existing bug where the setters were
incorrectly allowing the properties to be changed after the CPU was
already realized.
Backports commit b9472b76d273c7796d877c49af50969c0a879c50 from qemu
Switch all the uses of ld/st*_phys to address_space_ld/st*,
except for those cases where the address space is the CPU's
(ie cs->as). This was done with the following script which
generates a Coccinelle patch.
A few over-80-columns lines in the result were rewrapped by
hand where Coccinelle failed to do the wrapping automatically,
as well as one location where it didn't put a line-continuation
'\' when wrapping lines on a change made to a match inside
a macro definition.
===begin===
for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do
cat <<EOF
@ cpu_matches_ld_${FN} @
expression E1,E2;
identifier as;
@@
ld${FN}_phys(E1->as,E2)
@ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @
expression E1,E2;
@@
-ld${FN}_phys(E1,E2)
+address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL)
EOF
done
for FN in b w_le w_be l_le l_be q_le q_be w l q; do
cat <<EOF
@ cpu_matches_st_${FN} @
expression E1,E2,E3;
identifier as;
@@
st${FN}_phys(E1->as,E2,E3)
@ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @
expression E1,E2,E3;
@@
-st${FN}_phys(E1,E2,E3)
+address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL)
EOF
done
===endit===
Backports commit 42874d3a8c6267ff7789a0396843c884b1d0933a from qemu
Since the BSP bit is writable on real hardware, during reset all the CPUs which
were not chosen to be the BSP should have their BSP bit cleared. This fix is
required for KVM to work correctly when it changes the BSP bit.
An additional fix is required for QEMU tcg to allow software to change the BSP
bit.
Backports commit 9cb11fd7539b5b787d8fb3834004804a58dd16ae from qemu
According to my reading of the Intel documentation, the SYSRET instruction
is supposed to force the RPL bits of the %ss register to 3 when returning
to user mode. The actual sequence is:
SS.Selector <-- (IA32_STAR[63:48]+8) OR 3; (* RPL forced to 3 *)
However, the code in helper_sysret() leaves them at 0 (in other words, the "OR
3" part of the above sequence is missing). It does set the privilege level
bits of %cs correctly though.
This has caused me trouble with some of my VxWorks development: code that runs
okay on real hardware will crash on QEMU, unless I apply the patch below.
Backports commit ac57622985220de064059971f9ccb00905e9bd04 from qemu
The APIC ID compatibility code is required only for PC, and now that
x86_cpu_initfn() doesn't use x86_cpu_apic_id_from_index() anymore, that
code can be moved to pc.c.
Backports commit de13197a38cf45c990802661a057f64a05426cbc from qemu
Instead of setting APIC ID automatically when creating a X86CPU, require
the property to be set before realizing the object (which all callers of
cpu_x86_create() already do).
Backports commit e1356dd70aef11425883dd4d2885f1d208eb9d57 from qemu
The PC CPU initialization code already sets apic-id based on the CPU
topology, and CONFIG_USER doesn't need the topology-based APIC ID
calculation code.
Make CONFIG_USER set apic-id before realizing the CPU (just like PC
already does), so we can simplify x86_cpu_initfn later. As there is no
CPU topology configuration in CONFIG_USER, just use cpu_index as the
APIC ID.
Backports commit 9c235e83f1c3437be6ca45755909efb745c10deb from qemu
The field doesn't need to be inside CPUState, and it is not specific for
the CPUID instruction, so move and rename it.
Backports commit 9e9d3863adcbd1ffeca30f240f49805b00ba0d87 from qemu
Instead of putting extra logic inside cpu.h, just do everything inside
cpu_x86_init_user().
Backports commit 15258d46baef5f8265ad5f1002905664cf58f051 from qem
The function was used in only two places. In one of them, the function
made the code less readable by requiring temporary te[bcd]x variables.
In the other one we can simply inline the existing code.
Backports commit 08e1a1e5a175ecbfdb761db5a62090498f736969 from qemu
Right now, the AVX512 registers are split in many different fields:
xmm_regs for the low 128 bits of the first 16 registers, ymmh_regs
for the next 128 bits of the same first 16 registers, zmmh_regs
for the next 256 bits of the same first 16 registers, and finally
hi16_zmm_regs for the full 512 bits of the second 16 bit registers.
This makes it simple to move data in and out of the xsave region,
but would be a nightmare for a hypothetical TCG implementation and
leads to a proliferation of [XYZ]MM_[BWLSQD] macros. Instead,
this patch marshals data manually from the xsave region to a single
32x512-bit array, simplifying the macro jungle and clarifying which
bits are in which vmstate subsection.
The migration format is unaffected.
Backports commit b7711471f551aa4419f9d46a11121f48ced422da from qemu
While we're at it, emit the opcode adjacent to where we currently
record data for search_pc. This puts gen_io_start et al on the
"correct" side of the marker.
Backports commit 667b8e29c5b1d8c5b4e6ad5f780ca60914eb6e96 from qemu
This is improved type checking for the translators -- it's no longer
possible to accidentally swap arguments to the branch functions.
Note that the code generating backends still manipulate labels as int.
With notable exceptions, the scope of the change is just a few lines
for each target, so it's not worth building extra machinery to do this
change in per-target increments.
Backports commit 42a268c241183877192c376d03bd9b6d527407c7 from qemu
The method by which we count the number of ops emitted
is going to change. Abstract that away into some inlines.
Backports commit fe700adb3db5b028b504423b946d4ee5200a8f2f from qemu.
Thus, use cpu_env as the parameter, not TCG_AREG0 directly.
Update all uses in the translators.
Backports commit e1ccc05444676b92c63708096e36582be27fbee1 from qemu
Writing / reading to model specific registers should be as easy as
calling a function, it's a bit stupid to write shell code and run them
just to write/read to a MSR, and even worse, you need more than just a
shellcode to read...
So, add a special register ID called UC_X86_REG_MSR, which should be
passed to uc_reg_write()/uc_reg_read() as the register ID, and then a
data structure which is uc_x86_msr (12 bytes), as the value (always), where:
Byte Value Size
0 MSR ID 4
4 MSR val 8
* Remove glib from samples makefile
* changes to 16 bit segment registers needs to update segment base as well as segment selector
* change how x86 segment registers are set in 16-bit mode
* more appropriate solution to initial state of x86 segment registers in 16-bit mode
* remove commented lines
* Remove glib from samples makefile
* changes to 16 bit segment registers needs to update segment base as well as segment selector
* change how x86 segment registers are set in 16-bit mode
