The value returned from tcg_qemu_tb_exec() is the value passed to the
corresponding tcg_gen_exit_tb() at translation time of the last TB
attempted to execute. It is a little confusing to store it in a variable
named 'next_tb'. In fact, it is a combination of 4-byte aligned pointer
and additional information in its two least significant bits. Break it
down right away into two variables named 'last_tb' and 'tb_exit' which
are a pointer to the last TB attempted to execute and the TB exit
reason, correspondingly. This simplifies the code and improves its
readability.
Correct a misleading documentation comment for tcg_qemu_tb_exec() and
fix logging in cpu_tb_exec(). Also rename a misleading 'next_tb' in
another couple of places.
Backports commit 819af24b9c1e95e6576f1cefd32f4d6bf56dfa56 from qemu
In user mode, there's only a static address translation, TBs are always
invalidated properly and direct jumps are reset when mapping change.
Thus the destination address is always valid for direct jumps and
there's no need to restrict it to the pages the TB resides in.
Backports commit 90aa39a1cc4837360889f0e033ca25cc82100308 from qemu
We don't take care of direct jumps when address mapping changes. Thus we
must be sure to generate direct jumps so that they always keep valid
even if address mapping changes. Luckily, we can only allow to execute a
TB if it was generated from the pages which match with current mapping.
Document tcg_gen_goto_tb() declaration and note the reason for
destination PC limitations.
Some targets with variable length instructions allow TB to straddle a
page boundary. However, we make sure that both of TB pages match the
current address mapping when looking up TBs. So it is safe to do direct
jumps into the both pages. Correct the checks for some of those targets.
Given that, we can safely patch a TB which spans two pages. Remove the
unnecessary check in cpu_exec() and allow such TBs to be patched.
Backports commit 5b053a4a28278bca606eeff7d1c0730df1b047e9 from qemu
Unify the code of this function with tb_jmp_remove_from_list(). Making
these functions similar improves their readability. Also this could be a
step towards making this function thread-safe.
Backports commit f9c5b66f487a04d3747dc6997b1503f9258df945 from qemu
Move the code for removing jumps to a TB out of tb_phys_invalidate() to
a separate static inline function tb_jmp_unlink(). This simplifies
tb_phys_invalidate() and improves code structure.
Backports commit 89bba496322d4cf996d42cdd4bb0912231656c3d from qemu
tb_jmp_remove() was only used to remove the TB from a list of all TBs
jumping to the same TB which is n-th jump destination of the given TB.
Put a comment briefly describing the function behavior and rename it to
better reflect its purpose.
Backports commit 133626783aa5a1bf86332fa3e6f7b8efe005f924 from qemu
The check is to make sure that another thread hasn't already done the
same while we were outside of tb_lock. Mention this in a comment.
Backports commit 9962c478b153a18fe88a6509fe58cd178aff8abc from qemu
Initialize TB's direct jump list data fields and reset the jumps before
tb_link_page() puts it into the physical hash table and the physical
page list. So TB is completely initialized before it becomes visible.
This is pure rearrangement of code to a more suitable place, though it
could be a preparation for relaxing the locking scheme in future.
Backports commit 901bc3deb43bf37c85e43955905d003be7ae5fa5 from qemu
These fields do not contain pure pointers to a TranslationBlock
structure. So uintptr_t is the most appropriate type for them.
Also put some asserts to assure that the two least significant bits of
the pointer are always zero before assigning it to jmp_list_first.
Backports commit c37e6d7e3589ecb96914faa21025ad7ba6654aea from qemu
Briefly describe in a comment how direct block chaining is done. It
should help in understanding of the following data fields.
Rename some fields in TranslationBlock and TCGContext structures to
better reflect their purpose (dropping excessive 'tb_' prefix in
TranslationBlock but keeping it in TCGContext):
tb_next_offset => jmp_reset_offset
tb_jmp_offset => jmp_insn_offset
tb_next => jmp_target_addr
jmp_next => jmp_list_next
jmp_first => jmp_list_first
Avoid using a magic constant as an invalid offset which is used to
indicate that there's no n-th jump generated.
Backports commit f309101c26b59641fc1aa8fb2a98a5441cdaea03 from qemu
The setting of tcg_ctx.code_gen_buffer_size is done by the only caller of
size_code_gen_buffer(), which is code_gen_alloc():
$ git grep size_code_gen_buffer
translate-all.c:static inline size_t size_code_gen_buffer(size_t tb_size)
translate-all.c: tcg_ctx.code_gen_buffer_size = size_code_gen_buffer(tb_size);
Backports commit 835154b6e2200460f04719d0028716a37c178368 from qemu
Ensure direct jump patching in MIPS is atomic by using
atomic_read()/atomic_set() for code patching.
Backports commit c82460a560176ef69c2f0662bd280612e274db96 from qemu
Ensure direct jump patching in SPARC is atomic by using
atomic_read()/atomic_set() for code patching.
Backports commit 84f79fb7c6e857edc807e4a251338243ce0cbac3 from qemu
Ensure direct jump patching in AArch64 is atomic by using
atomic_read()/atomic_set() for code patching.
Backports commit 9e269112953be4d670cb0d25042bd6546fcf3e45 from qemu
Ensure direct jump patching in ARM is atomic by using
atomic_read()/atomic_set() for code patching.
Backports commit 7d14e0e2d661479985197203589c38840e1066df from qemu
Ensure direct jump patching in s390 is atomic by:
* naturally aligning a location of direct jump address;
* using atomic_read()/atomic_set() for code patching.
Backports commit ed3d51ecd7fe248d3959e469d53890ac9ffe0cd2 from qemu
Ensure direct jump patching in i386 is atomic by:
* naturally aligning a location of direct jump address;
* using atomic_read()/atomic_set() for code patching.
Backports commit 0d07abf05e98903c7faf204a9a90f7d45b7554dc from qemu
These macros provide a convenient way to n-byte align pointers up and
down and check if a pointer is n-byte aligned.
Backports commit 6b587d3cda48e7ba26de8d30bf0d8a7063970715 from qemu
We are inconsistent with the type of tb->flags: usage varies loosely
between int and uint64_t. Settle to uint32_t everywhere, which is
superior to both: at least one target (aarch64) uses the most significant
bit in the u32, and uint64_t is wasteful.
Compile-tested for all targets.
Backports commit 89fee74a0f066dfd73830a7b5fa137e87888c870 from qemu
The TCR_EL2 and TCR_EL3 regdefs were incorrectly using the
vmsa_tcr_el1_write function for writes. Since these registers don't
have the A1 bit that TCR_EL1 does, we don't need to do a tlb_flush()
when they are written. Remove the unnecessary .writefn and also the
harmless but unneeded .raw_writefn and .resetfn definitions.
Backports commit 6459b94c26dd666badb3547fef1456992a08e60b from qemu
The various load/store variants under disas_ldst_reg can all reuse the
same decoding for opc, size, rt and is_vector.
This patch unifies the decoding in preparation for generating
instruction syndromes for data aborts.
This will allow us to reduce the number of places to hook in updates
to the load/store state needed to generate the insn syndromes.
No functional change.
Backports commit cd694521ca061a5d0436d5df4ec8c17c8f4dfcdb from qemu
Use extract32 instead of open coding the bit masking when decoding
is_signed and is_extended. This streamlines the decoding with some
of the other ldst variants.
No functional change.
Backports commit 026a19c3128678d4fe301fc36e8ffacdc9ecccb8 from qemu
Split the data abort syndrome generator into two versions:
One with a valid Instruction Specific Syndrome (ISS) and another without.
The following new flags are supported by the syndrome generator
with ISS:
* isv - Instruction syndrome valid
* sas - Syndrome access size
* sse - Syndrome sign extend
* srt - Syndrome register transfer
* sf - Sixty-Four bit register width
* ar - Acquire/Release
These flags are not yet used, so this patch has no functional change
except that we will now correctly set the IL bit in data abort
syndromes without ISS information.
Backports commit 094d028a7968236cd2b7f7b96394f7a3b8ad97c8 from qemu
Use tcg_set_insn_param() instead of directly accessing internal
tcg data structures to update an insn param.
Backports commit 25caa94c4a26daaab1e65c6d887e2972aeb5749e from qemu
Add tcg_set_insn_param as a mechanism to modify an insn
parameter after emiting the insn. This is useful for icount
and also for embedding fault information for a specific insn.
Backports commit 1d41478fd428e01f057d3248292e4cdcdb048523 from qemu
There is a bug in ARM address translation regime with a long-descriptor
format. On the descriptor reading its address is formed from an index
which is a part of the input address. And on the first iteration this index
is incorrectly masked with 'grainsize' mask. But it can be wider according
to pseudo-code.
On the other hand on the iterations other than first the descriptor address
is formed from the previous level descriptor by masking with 'descaddrmask'
value. It always clears just 12 lower bits, but it must clear 'grainsize'
lower bits instead according to pseudo-code.
The patch fixes both cases.
Backports commit dddb5223413c5425ae6eaeb3b967627efc9675f7 from qemu
As described in AArch32.CheckS2Permission an instruction fetch fails if
XN bit is set or there is no read permission for the address.
Backports commit dfda68377e20943f474505e75238cb96bc6874bf from qemu
Returning a partial object on error is an invitation for a careless
caller to leak memory. We already fixed things in an earlier
patch to guarantee NULL if visit_start fails ("qapi: Guarantee
NULL obj on input visitor callback error"), but that does not
help the case where visit_start succeeds but some other failure
happens before visit_end, such that we leak a partially constructed
object outside visit_type_FOO(). As no one outside the testsuite
was actually relying on these semantics, it is cleaner to just
document and guarantee that ALL pointer-based visit_type_FOO()
functions always leave a safe value in *obj during an input visitor
(either the new object on success, or NULL if an error is
encountered), so callers can now unconditionally use
qapi_free_FOO() to clean up regardless of whether an error occurred.
The decision is done by adding visit_is_input(), then updating the
generated code to check if additional cleanup is needed based on
the type of visitor in use.
Note that we still leave *obj unchanged after a scalar-based
visit_type_FOO(); I did not feel like auditing all uses of
visit_type_Enum() to see if the callers would tolerate a specific
sentinel value (not to mention having to decide whether it would
be better to use 0 or ENUM__MAX as that sentinel).
Backports commit 68ab47e4b4ecc1c4649362b8cc1e49794d1a6537 from qemu
The semantics of the list visit are somewhat baroque, with the
following pseudocode when FooList is used:
start()
for (prev = head; cur = next(prev); prev = &cur) {
visit(&cur->value)
}
Note that these semantics (advance before visit) requires that
the first call to next() return the list head, while all other
calls return the next element of the list; that is, every visitor
implementation is required to track extra state to decide whether
to return the input as-is, or to advance. It also requires an
argument of 'GenericList **' to next(), solely because the first
iteration might need to modify the caller's GenericList head, so
that all other calls have to do a layer of dereferencing.
Thankfully, we only have two uses of list visits in the entire
code base: one in spapr_drc (which completely avoids
visit_next_list(), feeding in integers from a different source
than uint8List), and one in qapi-visit.py. That is, all other
list visitors are generated in qapi-visit.c, and share the same
paradigm based on a qapi FooList type, so we can refactor how
lists are laid out with minimal churn among clients.
We can greatly simplify things by hoisting the special case
into the start() routine, and flipping the order in the loop
to visit before advance:
start(head)
for (tail = *head; tail; tail = next(tail)) {
visit(&tail->value)
}
With the simpler semantics, visitors have less state to track,
the argument to next() is reduced to 'GenericList *', and it
also becomes obvious whether an input visitor is allocating a
FooList during visit_start_list() (rather than the old way of
not knowing if an allocation happened until the first
visit_next_list()). As a minor drawback, we now allocate in
two functions instead of one, and have to pass the size to
both functions (unless we were to tweak the input visitors to
cache the size to start_list for reuse during next_list, but
that defeats the goal of less visitor state).
The signature of visit_start_list() is chosen to match
visit_start_struct(), with the new parameters after 'name'.
The spapr_drc case is a virtual visit, done by passing NULL for
list, similarly to how NULL is passed to visit_start_struct()
when a qapi type is not used in those visits. It was easy to
provide these semantics for qmp-output and dealloc visitors,
and a bit harder for qmp-input (several prerequisite patches
refactored things to make this patch straightforward). But it
turned out that the string and opts visitors munge enough other
state during visit_next_list() to make it easier to just
document and require a GenericList visit for now; an assertion
will remind us to adjust things if we need the semantics in the
future.
Several pre-requisite cleanup patches made the reshuffling of
the various visitors easier; particularly the qmp input visitor.
Backports commit d9f62dde1303286b24ac8ce88be27e2b9b9c5f46 from qemu
As shown in the previous commit, the string input visitor was
treating bogus input as an empty list rather than an error.
Fix parse_str() to set errp, then the callers to exit early if
an error was reported.
Meanwhile, fix the testsuite to use the generated
qapi_free_int16List() instead of rolling our own, and to
validate the fixed behavior, while at the same time documenting
one more change that we'd like to make in a later patch (a
failed visit_start_list should guarantee a NULL pointer,
regardless of what things were on input).
Backports commit 74f24cb6306d065045d0e2215a7d10533fa59c57 from qemu
As mentioned in previous patches, we want to call visit_end_struct()
functions unconditionally, so that visitors can release resources
tied up since the matching visit_start_struct() without also having
to worry about error priority if more than one error occurs.
Even though error_propagate() can be safely used to ignore a second
error during cleanup caused by a first error, it is simpler if the
cleanup cannot set an error. So, split out the error checking
portion (basically, input visitors checking for unvisited keys) into
a new function visit_check_struct(), which can be safely skipped if
any earlier errors are encountered, and leave the cleanup portion
(which never fails, but must be called unconditionally if
visit_start_struct() succeeded) in visit_end_struct().
Generated code in qapi-visit.c has diffs resembling:
|@@ -59,10 +59,12 @@ void visit_type_ACPIOSTInfo(Visitor *v,
| goto out_obj;
| }
| visit_type_ACPIOSTInfo_members(v, obj, &err);
|- error_propagate(errp, err);
|- err = NULL;
|+ if (err) {
|+ goto out_obj;
|+ }
|+ visit_check_struct(v, &err);
| out_obj:
|- visit_end_struct(v, &err);
|+ visit_end_struct(v);
| out:
and in qapi-event.c:
@@ -47,7 +47,10 @@ void qapi_event_send_acpi_device_ost(ACP
| goto out;
| }
| visit_type_q_obj_ACPI_DEVICE_OST_arg_members(v, ¶m, &err);
|- visit_end_struct(v, err ? NULL : &err);
|+ if (!err) {
|+ visit_check_struct(v, &err);
|+ }
|+ visit_end_struct(v);
| if (err) {
| goto out;
Backports commit 15c2f669e3fb2bc97f7b42d1871f595c0ac24af8 from qemu
Tighten assertions in the QMP output visitor, so that:
- qmp_output_get_qobject() can only be called after pairing a
visit_end_* for every visit_start_* (rather than allowing it on
a partially built object)
- qmp_output_get_qobject() cannot be called unless at least one
visit_type_* or visit_start/visit_end pair has occurred since
creation/reset (the accidental return of NULL fixed by commit
ab8bf1d7 would have been much easier to diagnose)
- ensure that we are encountering the expected object or list
type, to provide protection against mismatched push(struct)/
pop(list) or push(list)/pop(struct), similar to the qmp-input
protection added in commit bdd8e6b5.
- ensure that except for the root, 'name' is non-null inside a
dict, and NULL inside a list (this may need changing later if
we add "name.0" support for better error messages for a list,
but for now it makes sure all users are at least consistent)
Backports commit 56a6f02b8ce1fe41a2a9077593e46eca7d98267d from qemu
Implement the new type_null() callback for the qmp input and
output visitors. While we don't yet have a use for this in QAPI
input (the generator will need some tweaks first), some
potential usages have already been discussed on the list.
Meanwhile, the output visitor could already output explicit null
via type_any, but this gives us finer control.
At any rate, it's easy to test that we can round-trip an explicit
null through manual use of visit_type_null() wrapped by a virtual
visit_start_struct() walk, even if we can't do the visit in a
QAPI type. Repurpose the test_visitor_out_empty test,
particularly since a future patch will tighten semantics to
forbid use of qmp_output_get_qobject() without at least one
intervening visit_type_*.
Backports commit 3df016f185521f8dfa5bd89168722887156405c7 from qemu
Right now, qmp-output-visitor happens to produce a QNull result
if nothing is actually visited between the creation of the visitor
and the request for the resulting QObject. A stronger protocol
would require that a QMP output visit MUST visit something. But
to still be able to produce a JSON 'null' output, we need a new
visitor function that states our intentions. Yes, we could say
that such a visit must go through visit_type_any(), but that
feels clunky.
So this patch introduces the new visit_type_null() interface and
its no-op interface in the dealloc visitor, and stubs in the
qmp visitors (the next patch will finish the implementation).
For the visitors that will not implement the callback, document
the situation. The code in qapi-visit-core unconditionally
dereferences the callback pointer, so that a segfault will inform
a developer if they need to implement the callback for their
choice of visitor.
Note that JSON has a primitive null type, with the single value
null; likewise with the QNull type for QObject; but for QAPI,
we just have the 'null' value without a null type. We may
eventually want to add more support in QAPI for null (most likely,
we'd use it via an alternate type that permits 'null' or an
object); but we'll create that usage when we need it.
Backports commit 3bc97fd5924561d92f32758c67eaffd2e4e25038 from qemu
The visitor interface for mapping between QObject/QemuOpts/string
and QAPI is scandalously under-documented, making changes to visitor
core, individual visitors, and users of visitors difficult to
coordinate. Among other questions: when is it safe to pass NULL,
vs. when a string must be provided; which visitors implement which
callbacks; the difference between concrete and virtual visits.
Correct this by retrofitting proper contracts, and document where some
of the interface warts remain (for example, we may want to modify
visit_end_* to require the same 'obj' as the visit_start counterpart,
so the dealloc visitor can be simplified). Later patches in this
series will tackle some, but not all, of these warts.
Add assertions to (partially) enforce the contract. Some of these
were only made possible by recent cleanup commits.
Backports commit adfb264c9ed04bfc694921b72173be8e29e90024 from qemu
After recent changes, the only remaining use of
visit_start_implicit_struct() is for allocating the space needed
when visiting an alternate. Since the term 'implicit struct' is
hard to explain, rename the function to its current usage. While
at it, we can merge the functionality of visit_get_next_type()
into the same function, making it more like visit_start_struct().
Generated code is now slightly smaller:
| {
| Error *err = NULL;
|
|- visit_start_implicit_struct(v, (void**) obj, sizeof(BlockdevRef), &err);
|+ visit_start_alternate(v, name, (GenericAlternate **)obj, sizeof(**obj),
|+ true, &err);
| if (err) {
| goto out;
| }
|- visit_get_next_type(v, name, &(*obj)->type, true, &err);
|- if (err) {
|- goto out_obj;
|- }
| switch ((*obj)->type) {
| case QTYPE_QDICT:
| visit_start_struct(v, name, NULL, 0, &err);
...
| }
|-out_obj:
|- visit_end_implicit_struct(v);
|+ visit_end_alternate(v);
| out:
| error_propagate(errp, err);
| }
Backports commit dbf11922622685934bfb41e7cf2be9bd4a0405c0 from qemu
In the QMP input visitor, visiting a list traverses two objects:
the QAPI GenericList of the caller (which gets advanced in
visit_next_list() regardless of this patch), and the QList input
that we are converting to QAPI. For consistency with QDict
visits, we want to consume elements from the input QList during
the visit_type_FOO() for the list element; that is, we want ALL
the code for consuming an input to live in qmp_input_get_object(),
rather than having it split according to whether we are visiting
a dict or a list. Making qmp_input_get_object() the common point
of consumption will make it easier for a later patch to refactor
visit_start_list() to cover the GenericList * head of a QAPI list,
and in turn will get rid of the 'first' flag (which lived in
qmp_input_next_list() pre-patch, and is hoisted to StackObject
by this patch).
This patch is therefore altering the post-condition use of 'entry',
while keeping what gets visited unchanged, from:
start_list next_list type_ELT ... next_list type_ELT next_list end_list
visits 1st elt last elt
entry NULL 1st elt 1st elt last elt last elt NULL gone
where type_ELT() returns (entry ? entry : 1st elt) and next_list() steps
entry
to this usage:
start_list next_list type_ELT ... next_list type_ELT next_list end_list
visits 1st elt last elt
entry 1st elt 1nd elt 2nd elt last elt NULL NULL gone
where type_ELT() steps entry and returns the old entry, and next_list()
leaves entry alone.
Backports commit fcf3cb21783b2dae3358fdbe7001cb2f74e0cedf from qemu
Don't embed the root of the visit into the stack of current
containers being visited. That way, we no longer get confused
on whether the first visit of a dictionary is to the dictionary
itself or to one of the members of the dictionary, based on
whether the caller passed name=NULL; and makes the QMP Input
visitor like other visitors where the value of 'name' is now
ignored on the root visit. (We may someday want to revisit
the rules on what 'name' should be on a top-level visit,
rather than just ignoring it; but that would be the topic of
another patch).
An audit of all qmp_input_visitor_new() call sites shows that
there were only two places where callers had previously been
visiting to a QDict with a non-NULL name to bypass a call to
visit_start_struct(), and those were fixed in prior patches.
Backports commit ce140b176920b5b65184020735a3c65ed3e9aeda from qemu
Commit e8316d7 mistakenly passed consume=true within
qmp_input_optional() when checking if an optional member was
present, but the mistake was silently ignored since the code
happily let us extract a member more than once. Fix
qmp_input_optional() to not consume anything, then tighten up
the input visitor to ensure that a member is consumed exactly
once (all generated code follows this pattern; and the new
assert will catch any hand-written code that tries to visit
the same key more than once).
Backports commit e5826a2fd727f0be54a81083f31fe02a275465cd from qemu
The following uses of a QMP input visitor should be strict
(that is, excess keys in QDict input should be flagged if not
converted to QAPI):
- Testsuite code unrelated to explicitly testing non-strict
mode (test-qmp-commands, test-visitor-serialization); since
we want more code to be strict by default, having more tests
of strict mode doesn't hurt
- Code used for cloning QAPI objects (replay-input.c,
qemu-sockets.c); we are reparsing a QObject just barely
produced by the qmp output visitor and which therefore should
not have any garbage, so while it is extra work to be strict,
it validates that our clone is correct [note that a later patch
series will simplify these two uses by creating an actual
clone visitor that is much more efficient than a
generate/reparse cycle]
- qmp_object_add(), which calls into user_creatable_add_type().
Since command line parsing for '-object' uses the same
user_creatable_add_type() through the OptsVisitor, and that is
always strict, we want to ensure that any nested dictionaries
would be treated the same in QMP and from the command line (I
don't actually know if such nested dictionaries exist). Note
that on this code change, strictness only matters for nested
dictionaries (if even possible), since we already flag excess
input at the top level during an earlier object_property_set()
on an unknown key, whether from QemuOpts:
$ ./x86_64-softmmu/qemu-system-x86_64 -nographic -nodefaults -qmp stdio -object secret,id=sec0,data=letmein,format=raw,foo=bar
qemu-system-x86_64: -object secret,id=sec0,data=letmein,format=raw,foo=bar: Property '.foo' not found
or from QMP:
$ ./x86_64-softmmu/qemu-system-x86_64 -nographic -nodefaults -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 93, "minor": 5, "major": 2}, "package": ""}, "capabilities": []}}
{"execute":"qmp_capabilities"}
{"return": {}}
{"execute":"object-add","arguments":{"qom-type":"secret","id":"sec0","props":{"format":"raw","data":"letmein","foo":"bar"}}}
{"error": {"class": "GenericError", "desc": "Property '.foo' not found"}}
The only remaining uses of non-strict input visits are:
- QMP 'qom-set' (which eventually executes
object_property_set_qobject()) - mark it as something to revisit
in the future (I didn't want to spend any more time on this patch
auditing if we have any QOM dictionary properties that might be
impacted, and couldn't easily prove whether this code path is
shared with anything else).
- test-qmp-input-visitor: explicit tests of non-strict mode. If
we later get rid of users that don't need strictness, then this
test should be merged with test-qmp-input-strict
Backports relevant parts of commit 240f64b6dc3346d044d7beb7cc3a53668ce47384 from qemu
Rather than having two separate ways to create a QMP input
visitor, where the safer approach has the more verbose name,
it is better to consolidate things into a single function
where the caller must explicitly choose whether to be strict
or to ignore excess input. This patch is the strictly
mechanical conversion; the next patch will then audit which
uses can be made stricter.
Backports commit fc471c18d5d2ec713d5a019f9530398675494bc8 from qemu
Management of the top of stack was a bit verbose; creating a
temporary variable and adding some comments makes the existing
code more legible before the next few patches improve things.
No semantic changes other than asserting that we are always
visiting a QObject, and not a NULL value. In particular, the
check for 'name && qobject_type(qobj) == QTYPE_QDICT)' is a
bit overkill (a dict visit should always have a name); a later
patch revisits that, while this patch is only changing one
layer of indentation due to dropping 'if (qobj)'.
Backports commit b471d012e5d7bec1d2272738141e121b5581fcdf from qemu
