Commit graph

18 commits

Author SHA1 Message Date
James Hogan f285157856
target/mips: Abstract mmu_idx from hflags
The MIPS mmu_idx is sometimes calculated from hflags without an env
pointer available as cpu_mmu_index() requires.

Create a common hflags_mmu_index() for the purpose of this calculation
which can operate on any hflags, not just with an env pointer, and
update cpu_mmu_index() itself and gen_intermediate_code() to use it.

Also update debug_post_eret() and helper_mtc0_status() to log the MMU
mode with the status change (SM, UM, or nothing for kernel mode) based
on cpu_mmu_index() rather than directly testing hflags.

This will also allow the logic to be more easily updated when a new MMU
mode is added.

Backports commit b0fc6003224543d2bdb172eca752656a6223e4a1 from qemu
2018-03-04 00:45:00 -05:00
James Hogan 54b349aee5
target/mips: Decode microMIPS EVA load & store instructions
Implement decoding of microMIPS EVA load and store instruction groups in
the POOL31C pool. These use the same gen_ld(), gen_st(), gen_st_cond()
helpers as the MIPS32 decoding, passing the equivalent MIPS32 opcodes as
opc.

Backports commit 8fffc64696783b1ff1d17262d098976479895660 from qemu
2018-03-04 00:37:39 -05:00
Leon Alrae 8fadc55db3
target-mips: make ITC Configuration Tags accessible to the CPU
Add CP0.ErrCtl register with WST, SPR and ITC bits. In 34K and interAptiv
processors these bits are used to enable CACHE instruction access to
different arrays. When WST=0, SPR=0 and ITC=1 the CACHE instruction will
access ITC tag values.

Generally we do not model caches and we have been treating the CACHE
instruction as NOP. But since CACHE can operate on ITC Tags new
MIPS_HFLAG_ITC_CACHE hflag is introduced to generate the helper only when
CACHE is in the ITC Access mode.

Backports commit 0d74a222c27e26fc40f4f6120c61c3f9ceaa3776 from qemu
2018-03-04 00:34:30 -05:00
James Hogan 22ca920e40
target/mips: Decode MIPS32 EVA load & store instructions
Implement decoding of MIPS32 EVA loads and stores. These access the user
address space from kernel mode when implemented, so for each instruction
we need to check that EVA is available from Config5.EVA & check for
sufficient COP0 privilege (with the new check_eva()), and then override
the mem_idx used for the operation.

Unfortunately some Loongson 2E instructions use overlapping encodings,
so we must be careful not to prevent those from being decoded when EVA
is absent.

Backports commit 7696414729b2d0f870c80ad1dd637d854bc78847 from qemu
2018-03-04 00:20:09 -05:00
James Hogan 42a5534ade
target/mips: Prepare loads/stores for EVA
EVA load and store instructions access the user mode address map, so
they need to use mem_idx of MIPS_HFLAG_UM. Update the various utility
functions to allow mem_idx to be more easily overridden from the
decoding logic.

Specifically we add a mem_idx argument to the op_ld/st_* helpers used
for atomics, and a mem_idx local variable to gen_ld(), gen_st(), and
gen_st_cond().

Backports commit dd4096cd2ccc19384770f336c930259da7a54980 from qemu
2018-03-04 00:14:09 -05:00
James Hogan 152323fe35
target/mips: Add CP0_Ebase.WG (write gate) support
Add support for the CP0_EBase.WG bit, which allows upper bits to be
written (bits 31:30 on MIPS32, or bits 63:30 on MIPS64), along with the
CP0_Config5.CV bit to control whether the exception vector for Cache
Error exceptions is forced into KSeg1.

This is necessary on MIPS32 to support Segmentation Control and Enhanced
Virtual Addressing (EVA) extensions (where KSeg1 addresses may not
represent an unmapped uncached segment).

It is also useful on MIPS64 to allow the exception base to reside in
XKPhys, and possibly out of range of KSEG0 and KSEG1.

Backports commit 74dbf824a1313b6064bbebb981a7440951d70896 from qemu
2018-03-03 23:55:09 -05:00
James Hogan fe0de45a26
target/mips: Fix MIPS64 MFC0 UserLocal on BE host
Using MFC0 to read CP0_UserLocal uses tcg_gen_ld32s_tl, however
CP0_UserLocal is a target_ulong. On a big endian host with a MIPS64
target this reads and sign extends the more significant half of the
64-bit register.

Fix this by using ld_tl to load the whole target_ulong and ext32s_tl to
sign extend it, as done for various other target_ulong COP0 registers.

Backports commit e40df9a80bb7cdb0a4ca650985fa9fe572097fa7 from qemu
2018-03-03 23:37:41 -05:00
Lluís Vilanova 32b3c3815d
tcg: Pass generic CPUState to gen_intermediate_code()
Needed to implement a target-agnostic gen_intermediate_code()
in the future.

Backports commit 9c489ea6bed134fecfd556b439c68bba48fbe102 from qemu
2018-03-03 23:34:18 -05:00
Aurelien Jarno 1c0169842d
target/mips: optimize WSBH, DSBH and DSHD
Use the same mask to avoid having to load two different constants.

Backports commit 06a57e5cc7ee5292a4915117ebf951e310a28264 from qemu
2018-03-03 22:47:39 -05:00
Miodrag Dinic 8daabd339e
target/mips: fix msa copy_[s|u]_df rd = 0 corner case
This patch fixes the msa copy_[s|u]_df instruction emulation when
the destination register rd is zero. Without this patch the zero
register would get clobbered, which should never happen because it
is supposed to be hardwired to 0.

Fix this corner case by explicitly checking rd = 0 and effectively
making these instructions emulation no-op in that case.

Backports commit cab4888136a92250fdd401402622824994f7ce0b from qemu
2018-03-03 22:08:12 -05:00
Aurelien Jarno 2c49a6b2f6
target/mips: optimize indirect branches
Backports commit e350d8ca3ac7e31c6af71a4ab74d2442dfefc697 from qemu
2018-03-03 14:23:58 -05:00
Aurelien Jarno 8ce8d4fe20
target/mips: optimize cross-page direct jumps in softmmu
Backports commit d9a9acde64b862107933f9e9a01435e51bf8f91b from qemu
2018-03-03 14:23:25 -05:00
Yongbok Kim ce3aecf263
target/mips: fix delay slot detection in gen_msa_branch()
It is unnecessary to test R6 from delay/forbidden slot check
in gen_msa_branch().

https://bugs.launchpad.net/qemu/+bug/1663287

Backports commit 075a1fe788d36b271ec25507466c30b9a90b5d54 from qemu
2018-03-02 14:15:50 -05:00
Philippe Mathieu-Daudé d17c07b548
target-mips: replace break by goto cp0_unimplemented
this fixes many warnings like:

target/mips/translate.c:6253:13: warning: Value stored to 'rn' is never read
rn = "invalid sel";
^ ~~~~~~~~~~~~~

Backports commit 3570d7f6672836140f0a1ec9bf95dd5ea50a2aaa from qemu
2018-03-02 14:14:57 -05:00
Philippe Mathieu-Daudé 5f78f3cd80
target-mips: log bad coprocessor0 register accesses with LOG_UNIMP
Backports commit 965447eecb6b98d6dfc4dbd97f836093c7e398a0 from qemu
2018-03-02 14:12:29 -05:00
Philippe Mathieu-Daudé e7176e6c85
target-mips: remove old & unuseful comments
Backports commit 989f2aa9af7f05c323761b66c0e299059a19b7b1 from qemu
2018-03-02 14:11:20 -05:00
Paul Burton 411ddd16cf
target-mips: Provide function to test if a CPU supports an ISA
Provide a new cpu_supports_isa function which allows callers to
determine whether a CPU supports one of the ISA_ flags, by testing
whether the associated struct mips_def_t sets the ISA flags in its
insn_flags field.

An example use of this is to allow boards which generate bootloader code
to determine the properties of the CPU that will be used, for example
whether the CPU is 64 bit or which architecture revision it implements.

Backports commit bed9e5ceb158c886d548fe59675a6eba18baeaeb from qemu
2018-03-02 08:20:19 -05:00
Thomas Huth b2f1326437
Move target-* CPU file into a target/ folder
We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.

Backports commit fcf5ef2ab52c621a4617ebbef36bf43b4003f4c0 from qemu
2018-03-01 22:50:58 -05:00
Renamed from qemu/target-mips/translate.c (Browse further)