The current method of toggling the libdecor window visibility by destroying and recreating the frame results in a race where a use-after-free bug can manifest itself within libdecor when window visibility is toggled quickly. Instead, use the libdecor function for toggling visibility instead of destroying and recreating the frame every time.
Wayland works like SDL's "auto capture" feature already, tracking the mouse
globally only while a drag is occuring, and this is the only way to get mouse
input outside the window.
Setting this flag ourselves lets SDL_CaptureMouse() work in the most common
use case without actually implementing CaptureMouse for the backend, including
SDL's auto capture feature.
Fixes#6010.
GNOME exposes the cursor size and theme via the org.freedesktop.portal.Settings interface of the xdg-desktop portal, so query these values via D-Bus, if available.
The XCURSOR_SIZE/XCURSOR_THEME envvars will be tried first, so as not to override any user specified sizes or themes, then D-Bus, then, failing that, it will fall back to default values.
The event no longer spams each time a window gets focus if there are windows on monitors with different color profiles.
This also has the side effect that you no longer get a color profile event at window creation, which is consistent with other events that communicate state changes.
- Touch events may be translated to mouse movement events without the normal Xinput2 raw motion events
being sent. Not all touch events will necessarily move the mouse but this ensures we update the global
mouse state just in case.
- Fix up some formatting
CR: saml
Cache off NSWindow's windowNumber in SDL_WindowData on setup and use that in `Cocoa_SendWakeupEvent` to prevent accessing windowNumber off the main thread.
As discussed in PR review, there may be an off-chance that the index
returned doesn't match up with SDL's display indexing.
This change ensures that the indices match and adds a safety check for
off-screen windows.
With the introduction of this function, it is possible that for certain
monitor and window configurations, creating an SDL window will cause a
native crash.
```
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000050
Exception Codes: 0x0000000000000001, 0x0000000000000050
Exception Note: EXC_CORPSE_NOTIFY
Termination Reason: Namespace SIGNAL, Code 11 Segmentation fault: 11
Terminating Process: exc handler [56627]
VM Region Info: 0x50 is not in any region. Bytes before following region: 140737486737328
REGION TYPE START - END [ VSIZE] PRT/MAX SHRMOD REGION DETAIL
UNUSED SPACE AT START
--->
VM_ALLOCATE 7fffffe75000-7fffffe76000 [ 4K] r-x/r-x SM=ALI
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libSDL2.dylib 0x10247f665 SDL_UpdateFullscreenMode + 357
1 libSDL2.dylib 0x10247ec70 SDL_CreateWindow_REAL + 1504
2 ??? 0x111262de8 ???
3 ??? 0x110c39fff ???
4 libcoreclr.dylib 0x101fdf2a9 CallDescrWorkerInternal + 124
```
Tracking thread from our end: https://github.com/ppy/osu-framework/issues/5190
Regressed with: https://github.com/libsdl-org/SDL/pull/5573
In testing, the window would not find a valid screen if created
"hanging" off a primary display with a secondary display below it. In
checking why this was the case, the `display_centre` was being
calculated with a negative y origin, causing a final negative value
falling outside all display bounds:
```
SDL error log [debug]: display_centre.y = -1296 + 1296 / 2
SDL error log [debug]: Display rect 0: 0 0 2560 1440
SDL error log [debug]: Display rect 1: 2560 -625 1080 2560
SDL error log [debug]: Display rect 2: 0 1440 1728 1296
```
The method that was being used to find the current window using the frame
origin/size seems unreliable, so I have opted to replace it with with a
tried method (https://stackoverflow.com/a/40891902).
Initial testing shows that this works with non-standard DPI screens, but
further testing would be appreciated (cc @sezero / @misl6 from the
original PR thread).
We actually request CSD mode with xdg-decoration for borderless
windows, so we get what we wanted there and there's no point in going
into fallback paths.
Currently, the SDL_WINDOWEVENT_RESIZED event is sent before the actual
window is resized (and various internal state, such as the desired
GL/Vulkan backbuffer size, are updated). This makes sense, as SDL will
discard a no-op resize, which would be the case if we had resized before
sending the event (indeed, there are existing hacks to prevent this).
However, this means that SDL_{GL,Vulkan}_GetDrawableSize() will still
use the old size in the SDL_WINDOWEVENT_RESIZED handler. In the case of
SDL_Renderer, this means the drawable size it uses will be wrong, and
the viewport will get "updated" to the old value.
This then results in bug #5899.
* Fix assumption that DRI_DEVNAME begins at 0
The existing logic of the code was to count every possible entry in
KMSDRM_DRI_PATH. After this a for loop would start trying to open
filename0, filename1, filename2, etc. In recent Linux kernels (say
5.18) with simpledrm, the lowest KMSDRM_DRI_DEVNAME is often
/dev/dri/card1, rather than /dev/dri/card0, causing the code to fail
once /dev/dri/card0 has failed to open. Running:
modprobe foodrm && modprobe bardrm && rmmod foodrm
before you try to run an application with SDL KMSDRM would have also
made this fail.
* Various changes from review
- Removed newline and period from SDL error
- Explicitely compare memcmp to zero (also changed to SDL_memcmp)
- Changed memcpy to strncpy
- Less aggressive line wrapping
* Various changes from review
- strncpy to SDL_strlcpy
- removed size hardcodings for KMSDRM_DRI_PATHSIZE and
KMSDRM_DRI_DEVNAMESIZE
- made all KMSDRM_DRI defines, run-time variables to reduce bugs caused
by these defines being more build-time on Linux and more run-rime on
OpenBSD
- renamed openbsd69orgreater variable to moderndri
- altered comment from "if on OpenBSD" to add difference in 6.9
* Various changes from review
- Use max size of destination, rather than max size of source
- Less hardcodings
The documentation doesn't state that the argument is ever modified,
and no implementation does so currently.
This is a non-breaking change to guarantee as much to callers.
* Xbox GDK support (14 squashed commits)
* Added basic keyboard testing
* Update readme
* Code review fixes
* Fixed issue where controller add/removal wasn't working (since the device notification events don't work on Xbox, have to use the joystick thread to poll XInput)
Use SDL_lroundf() to round fractional backbuffer sizes halfway away from zero, as this is the rounding method recommended by the forthcoming Wayland fractional scaling protocol.
We might want to use ssize_t as @Guldoman suggested, but that's a larger internal API change, and still requires casting of the SDL_utf8strnlen() result.
Fixes https://github.com/libsdl-org/SDL/pull/5821
Some compositors will provide 'nicer' / 'human readable' output descriptions via the xdg-output protocol. Use these description strings, when available, instead of the model name provided by wl-output. On compositors such as GNOME where this is provided, the display names provided to applications by SDL will now match those in the desktop display settings panel. On compositors where this data isn't provided, the old behavior of using the model string provided by wl-output will remain unchanged.
Additionally, per the protocol spec, output data provided by xdg-output should supersede wl-output data, so this is the recommended behavior in general.
If the width is sufficiently ludicrous, then the calculated pitch or
the image size could conceivably be a signed integer overflow, which
is undefined behaviour. Calculate in the unsigned size_t domain, with
overflow checks.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Adds hint "SDL_WINDOWS_DPI_SCALING" which can be set to "1" to
change the SDL coordinate system units to be DPI-scaled points, rather
than pixels everywhere.
This means windows will be appropriately sized, even when created on
high-DPI displays with scaling.
e.g. requesting a 640x480 window from SDL, on a display with 125%
scaling in Windows display settings, will create a window with an
800x600 client area (in pixels).
Setting this to "1" implicitly requests process DPI awareness
(setting SDL_WINDOWS_DPI_AWARENESS is unnecessary),
and forces SDL_WINDOW_ALLOW_HIGHDPI on all windows.
If the move results in a DPI change, we need to allow the window to resize (e.g. AdjustWindowRectExForDpi frame sizes are different).
- WM_DPICHANGED: Don't assume WM_GETDPISCALEDSIZE is always called for PMv2 awareness - it's only called during interactive dragging.
- WIN_AdjustWindowRectWithStyle: always calculate final window size including frame based on the destination rect,
not based on the current window DPI.
- Update wmmsg.h to include WM_GETDPISCALEDSIZE (for WMMSG_DEBUG)
- WIN_AdjustWindowRectWithStyle: add optional logging
- WM_GETMINMAXINFO: add optional HIGHDPI_DEBUG logging
- WM_DPICHANGED: fix potentially clobbering data->expected_resize
Together these changes fix the following scenario:
- launch testwm2 with the SDL_WINDOWS_DPI_AWARENESS=permonitorv2 environment variable
- Windows 10 21H2 (OS Build 19044.1706)
- Left (primary) monitor: 3840x2160, 125% scaling
- Right (secondary) monitor: 2560x1440, 100% scaling
- Alt+Enter, Alt+Enter (to enter + leave desktop fullscreen), Alt+Right (to move window to right monitor). Ensure the window client area stays 640x480. Drag the window back to the 125% monitor, ensure client area stays 640x480.
The hint allows setting a specific DPI awareness ("unaware", "system", "permonitor", "permonitorv2").
This is the first part of High-DPI support on Windows ( https://github.com/libsdl-org/SDL/issues/2119 ).
It doesn't implement a virtualized SDL coordinate system, which will be
addressed in a later commit. (This hint could be useful for SDL apps
that want 1 SDL unit = 1 pixel, though.)
Detecting and behaving correctly under per-monitor V2
(calling AdjustWindowRectExForDpi where needed) should fix the
following issues:
https://github.com/libsdl-org/SDL/issues/3286https://github.com/libsdl-org/SDL/issues/4712
XDG-toplevel min/max size values are double-buffered data and must be committed before entering the fullscreen state, or a max window size value smaller than the display dimensions may cause the compositor to incorrectly configure the fullscreen window size. This fixes windowed->fullscreen transitions on GNOME, where, previously, certain combinations of window flags and min/max size values could cause entering fullscreen mode to fail with odd window sizes and/or offsets due to the new max size values not being committed before entering fullscreen, causing the compositor to clamp to the old values.
In the case of libdecor, it has its own layer of buffering on top of the xdg-toplevel surface for the min/max window dimensions, so both a frame commit and surface commit are required to set the state properly.
Previously, the surface damage region was being set in the same callback used for preventing render hangs in the GL backend when the surface was not visible. This was not ideal, as the callback was never fired in the case of using a different render backend or having a swap interval of 0. Use a separate frame callback for setting the surface damage region to ensure that it fires reliably, regardless of the backend being used or swap interval.
Some compositors (GNOME for example) don't set the transform flag when dealing with portrait mode displays, so the video modes won't have the width/height swapped in all cases where they should be. Check for both the 90/270 degree transform flag and if the display is taller than it is wide when determining whether to swap the width and height of the emulated video modes, and adjust the comparison logic when size testing against the native mode to account for this.
Add the hint "SDL_VIDEO_WAYLAND_MODE_EMULATION", which can be used to disable mode emulation under Wayland. When disabled, only the desktop and/or native display resolution is exposed.
Previously, scale values used by the displays and surfaces were always integers, with fractional scale values only being calculated when the backbuffer and viewport sizes were being determined. Now, if xdg-output is available, the fractional scale of output displays is calculated when the displays are enumerated and the true scale values of the output devices are used whenever possible.
This unifies the integer and fractional scaling systems, allows for the use of more accurate scale values that minimize overdraw when windows straddle multiple outputs, and lays the groundwork for the pending Wayland scaling protocols that will report the preferred scale values per-surface instead of per-output.
Compartmentalize the fullscreen mode emulation code blocks, unify the windowed/fullscreen viewport logic, consolidate all window geometry code into a central function to eliminate blocks of duplicate code and rename related variables and functions to more explicitly reflect their purpose.
Because we were sending multiple chunks of preedit strings,
`SDL_SendEditingText` was using the old `SDL_TEXTEDITING` event only.
Now if `SDL_HINT_IME_SUPPORT_EXTENDED_TEXT` is enabled, we send the full
string and correctly set the cursor position and selection size.
As of #5703, we call libdecor_dispatch() in Wayland_WaitEventTimeout(),
but this will crash if we don't load libdecor, as
SDL_VideoData::shell.libdecor will be NULL.
Since we don't load libdecor if we don't intend to use it (i.e., if
should_use_libdecor returns false), this results in a crash under KDE in
almost all circumstances.
Since #5602, SDL is intended to have the same ABI across the whole
major-version 2 cycle, so we should not check that the minor version
matches the one that was used to compile an application.
There are two checks that could make sense here.
The first check is that the major version matches the expected major
version. This is usually unnecessary and is not usually done (if we're
calling into the wrong library we'll likely crash anyway), but since we
have the information, we might as well continue to use it.
The second check is whether the version provided by the caller is
equal to or greater than a threshold version at which additional fields
were added to the struct. If it is, we should populate those fields;
if it is not, then we cannot. This is only useful on platforms where
additional fields have genuinely been added during the lifetime of
SDL 2, like Windows and DirectFB (but not X11).
This commit changes the first check to be consistent about only looking
at the minor version, while leaving the second check using SDL_VERSIONNUM
(which will be removed or widened in SDL 3, but it's fine for now).
Resolves: https://github.com/libsdl-org/SDL/issues/5711
Fixes: cd7c2f1 "Switch versioning scheme to be the same as GLib and Flatpak"
Signed-off-by: Simon McVittie <smcv@collabora.com>
