Commit graph

93 commits

Author SHA1 Message Date
Peter Maydell db9901f2ad
target-arm: Avoid buffer overrun on UNPREDICTABLE ldrd/strd
A LDRD or STRD where rd is not an even number is UNPREDICTABLE.
We were letting this fall through, which is OK unless rd is 15,
in which case we would attempt to do a load_reg or store_reg
to a nonexistent r16 for the second half of the double-word.
Catch the odd-numbered-rd cases and UNDEF them instead.

To do this we rearrange the structure of the code a little
so we can put the UNDEF catches at the top before we've
allocated TCG temporaries.

Backports commit a4bb522ee51087af61998f290d12ba2e14c7910e from qemu
2018-02-12 17:17:23 -05:00
Peter Maydell 3497be0faa
target-arm: Fix handling of STM (user) with r15 in register list
The A32 encoding of LDM distinguishes LDM (user) from LDM (exception
return) based on whether r15 is in the register list. However for
STM (user) there is no equivalent distinction. We were incorrectly
treating "r15 in list" as indicating exception return for both LDM
and STM, with the result that an STM (user) involving r15 went into
an infinite loop. Fix this; note that the value stored for r15
in this case is the current PC regardless of our current mode.

Backports commit da3e53ddcb0ca924da97ca5a35605fc554aa3e05 from qemu
2018-02-12 16:16:05 -05:00
Peter Maydell da216e211f
target-arm: Use correct mmu_idx for unprivileged loads and stores
The MMU index to use for unprivileged loads and stores is more
complicated than we currently implement:
* for A64, it should be "if at EL1, access as if EL0; otherwise
access at current EL"
* for A32/T32, it should be "if EL2, UNPREDICTABLE; otherwise
access as if at EL0".

In both cases, if we want to make the access for Secure EL0
this is not the same mmu_idx as for Non-Secure EL0.

Backports commit 579d21cce63f3dd2f6ee49c0b02a14e92cb4a836 from qemu
2018-02-12 11:28:17 -05:00
Peter Maydell 3261ed5801
target-arm: Define correct mmu_idx values and pass them in TB flags
We currently claim that for ARM the mmu_idx should simply be the current
exception level. However this isn't actually correct -- secure EL0 and EL1
should have separate indexes from non-secure EL0 and EL1 since their
VA->PA mappings may differ. We also will want an index for stage 2
translations when we properly support EL2.

Define and document all seven mmu index values that we require, and
pass the mmu index in the TB flags rather than exception level or
priv/user bit.

This change doesn't update the get_phys_addr() code, so our page
table walking still assumes a simplistic "user or priv?" model for
the moment.

Backports commit c1e3781090b9d36c60e1a254ba297cb34011d3d4 from qemu
2018-02-12 11:21:19 -05:00
Kirill Batuzov d45ea1ba3b
target-arm: check that LSB <= MSB in BFI instruction
The documentation states that if LSB > MSB in BFI instruction behaviour
is unpredictable. Currently QEMU crashes because of assertion failure in
this case:

tcg/tcg-op.h:2061: tcg_gen_deposit_i32: Assertion `len <= 32' failed.

While assertion failure may meet the "unpredictable" definition this
behaviour is undesirable because it allows an unprivileged guest program
to crash the emulator with the OS and other programs.

This patch addresses the issue by throwing illegal instruction exception
if LSB > MSB. Only ARM decoder is affected because Thumb decoder already
has this check in place.

To reproduce issue run the following program

int main(void) {
asm volatile (".long 0x07c00c12" :: );
return 0;
}

compiled with
gcc -marm -static badop_arm.c -o badop_arm

Backports commit 45140a57675ecb4b0daee71bf145c24dbdf9429c from qemu
2018-02-12 11:06:12 -05:00
Peter Maydell fb78e79d72
target-arm: add secure state bit to CPREG hash
Added additional NS-bit to CPREG hash encoding. Updated hash lookup
locations to specify hash bit currently set to non-secure.

Backports commit 51a79b039728277e35fd19f7a7b4bc6cb323697f from qemu
2018-02-11 18:35:52 -05:00
Sergey Fedorov acdd665668
target-arm: add non-secure Translation Block flag
This patch is based on idea found in patch at
git://github.com/jowinter/qemu-trustzone.git
f3d955c6c0ed8c46bc0eb10b634201032a651dd2 by
Johannes Winter <johannes.winter@iaik.tugraz.at>.

The TBFLAG captures the SCR NS secure state at the time when a TB is created so
the correct bank is accessed on system register accesses.

Backports commit 3f342b9e0e64ad681cd39840bfa75ef12d2807c1 from qemu
2018-02-11 17:50:46 -05:00
Richard Henderson 2c091e5fb8
target-arm: Add condexec state to insn_start
Backports commit 52e971d9ff67e340ac2a86bd67e14bd31c7991e0 from qemu
2018-02-11 15:13:40 -05:00
Richard Henderson dd1ec408e5
target-*: Increment num_insns immediately after tcg_gen_insn_start
This does tidy the icount test common to all targets.

Backports commit 959082fc4a93a016a6b697e1e0c2b373d8a3a373 from qemu
2018-02-11 12:46:30 -05:00
Richard Henderson a64d0ff657
target-*: Unconditionally emit tcg_gen_insn_start
While we're at it, emit the opcode adjacent to where we currently
record data for search_pc. This puts gen_io_start et al on the
"correct" side of the marker.

Backports commit 667b8e29c5b1d8c5b4e6ad5f780ca60914eb6e96 from qemu
2018-02-11 12:41:20 -05:00
Lioncash b3f9ff667b
tcg: Rename debug_insn_start to insn_start
With an eye toward making it mandatory.

Backports commit 765b842adec4c5a359e69ca08785553599f71496 from qemu
2018-02-11 12:34:01 -05:00
Richard Henderson 70dd48b855
target-arm: Handle always condition codes within arm_test_cc
Handling this with TCG_COND_ALWAYS will allow these unlikely
cases to be handled without special cases in the rest of the
translator. The TCG optimizer ought to be able to reduce
these ALWAYS conditions completely.

Backports commit 9305eac09e61d857c9cc11e20db754dfc25a82db from qemu
2018-02-10 23:48:10 -05:00
Lioncash 94f1227f7a
target-arm: Introduce DisasCompare
Split arm_gen_test_cc into 3 functions, so that it can be reused
for non-branch TCG comparisons.

Backports commit 6c2c63d3a02c79e9035ca0370cc549d0f938a4dd from qemu
2018-02-10 23:45:47 -05:00
Richard Henderson a3aaf5a864
tcg: Remove tcg_gen_trunc_i64_i32
Replacing it with tcg_gen_extrl_i64_i32.

Backports commit ecc7b3aa71f5fdcf9ee87e74ca811d988282641d from qemu
2018-02-10 23:11:02 -05:00
Richard Henderson 232632e76c
tcg: Change translator-side labels to a pointer
This is improved type checking for the translators -- it's no longer
possible to accidentally swap arguments to the branch functions.

Note that the code generating backends still manipulate labels as int.

With notable exceptions, the scope of the change is just a few lines
for each target, so it's not worth building extra machinery to do this
change in per-target increments.

Backports commit 42a268c241183877192c376d03bd9b6d527407c7 from qemu
2018-02-09 14:17:56 -05:00
Lioncash 0273e6ae18
tcg: Put opcodes in a linked list
The previous setup required ops and args to be completely sequential,
and was error prone when it came to both iteration and optimization.
2018-02-09 12:54:05 -05:00
Richard Henderson a41b9acc0c
tcg: Introduce tcg_op_buf_count and tcg_op_buf_full
The method by which we count the number of ops emitted
is going to change. Abstract that away into some inlines.

Backports commit fe700adb3db5b028b504423b946d4ee5200a8f2f from qemu.
2018-02-09 09:31:17 -05:00
Richard Henderson 78378289e3
tcg: Move emit of INDEX_op_end into gen_tb_end
Backports commit 0a7df5da986bd7ee0789f2d7b8611f2e8eee5046 from qemu
2018-02-09 08:51:01 -05:00
Richard Henderson 6b4b493dae
tcg: Change tcg_global_mem_new_* to take a TCGv_ptr
Thus, use cpu_env as the parameter, not TCG_AREG0 directly.
Update all uses in the translators.

Backports commit e1ccc05444676b92c63708096e36582be27fbee1 from qemu
2018-02-08 12:33:33 -05:00
Lioncash 0f453b0595
target/arm: Add aa{32, 64}_vfp_{dreg, qreg} helpers
Backports commit 9a2b5256ea1f68c89d5da4b54f180f576c2c82d6 from qemu
2018-02-07 10:09:26 -05:00
Lioncash dd577f5ea5
target/arm: Change the type of vfp.regs
Backports commit 3f68b8a5a6862f856524bb347bf348ae364dd43c from qemu
2018-02-07 09:57:43 -05:00
Merry 82c4212ce3
Merge pull request #8 from lioncash/optimize
Backport REV16 optimizations from qemu
2018-02-05 20:58:58 +00:00
Lioncash 5a37b8c28e
Backport optimizations to AArch32's REV16 handling
Backports commit 68cedf733ae32363ccf54f0b52c8a424d5ec98ed from qemu
2018-02-04 14:53:28 -05:00
Lioncash 4fb2fbfacf
Backport the JAZELLE feature flag
Backports commit c99a55d38dd5b5131f3fcbbaf41828a09ee62544 in qemu to unicorn
2018-02-02 08:50:18 -05:00
Lioncash 84319130cd
Backport the M_SECURITY feature flag
Backports relevant parts from commit 1e577cc7cffd3de14dbd321de5c3ef191c6ab07f in qemu to unicorn
2018-02-02 08:44:46 -05:00
Lioncash 291b5753eb
Backport the THUMB_DSP feature flag
Backports commit 62b44f059a84d1ac580a653fc4110dfabaef6b83 in qemu to unicorn.
2018-02-02 07:59:26 -05:00
Nguyen Anh Quynh 513075e061 arm: fix an warning reported by GCC 2017-04-21 21:12:57 +08:00
Nguyen Anh Quynh e917c9de10 Merge branch 'master' into msvc2 2017-04-21 01:17:00 +08:00
0xSeb 605400e10e determine correct Thumb/Thumb2 instruction size (16/32-bit) for code … (#796)
* determine correct Thumb/Thumb2 instruction size (16/32-bit) for code hook

* determine correct Thumb/Thumb2 instruction size (16/32-bit) for code hook

* determine correct Thumb/Thumb2 instruction size (16/32-bit) for code hook
2017-04-15 00:39:56 +08:00
xorstream 8e45102b43 Arm support ported. (#736)
* Fix for MIPS issue.

* Sparc support added.

* M68K support added.

* Arm support ported.

* Fix issue with VS2015 shlobj.h file
2017-01-23 23:30:57 +08:00
xorstream fac6a66860 platform.h move #3 2017-01-21 00:13:21 +11:00
xorstream 1aeaf5c40d This code should now build the x86_x64-softmmu part 2. 2017-01-19 22:50:28 +11:00
Andrew Dutcher 97b10da133 Undo the disaster that was the patch to unicorn github issue #266 and fix it correctly. makes normal self-modifying code work. 2016-08-09 19:35:20 -07:00
Ryan Hileman 0886ae8ede rework code/block tracing 2016-01-22 18:42:27 -08:00
Ryan Hileman 93052f6566 refactor to allow multiple hooks for one type 2016-01-22 18:41:43 -08:00
Nguyen Anh Quynh b72671c6d5 sparc, arm, m68k: check for exit request after every hooked instruction 2015-12-20 12:28:15 +08:00
Nguyen Anh Quynh 3ca8774f1a arm: properly handle the case when first insn in block is until address 2015-09-30 14:42:08 +08:00
Nguyen Anh Quynh 886946dcf4 do not use syscall to quit emulation. this can fix issues #147 & #148 2015-09-26 16:49:00 +08:00
Nguyen Anh Quynh 5005b4a6e2 arm: early check to see if the address of this block is the until address 2015-09-17 09:16:57 +07:00
Jonathon Reinhart 3bd705a060 Merge remote-tracking branch 'upstream/master' into change-handle-based-api 2015-08-30 00:23:51 -04:00
Nguyen Anh Quynh b335cf016c do not generate basic-block callback when translation is broken in the middle due to full cache (all the remaining archs) 2015-08-27 21:09:00 +08:00
Jonathon Reinhart 622d5cd5f9 change uch to uc_struct (target-arm) 2015-08-26 09:02:16 -04:00
Nguyen Anh Quynh 344d016104 import 2015-08-21 15:04:50 +08:00