It is a common thing amongst the various cpu reset functions want to
flush the SoftMMU's TLB entries. This is done either by calling
tlb_flush directly or by way of a general memset of the CPU
structure (sometimes both).
This moves the tlb_flush call to the common reset function and
additionally ensures it is only done for the CONFIG_SOFTMMU case and
when tcg is enabled.
In some target cases we add an empty end_of_reset_fields structure to the
target vCPU structure so have a clear end point for any memset which
is resetting value in the structure before CPU_COMMON (where the TLB
structures are).
While this is a nice clean-up in general it is also a precursor for
changes coming to cputlb for MTTCG where the clearing of entries
can't be done arbitrarily across vCPUs. Currently the cpu_reset
function is usually called from the context of another vCPU as the
architectural power up sequence is run. By using the cputlb API
functions we can ensure the right behaviour in the future.
Backports commit 1f5c00cfdb8114c1e3a13426588ceb64f82c9ddb from qemu
The cpu is allowed to require stricter alignment on these 8- and 16-byte
operations, and the OS is required to fix up the accesses as necessary,
so the previous code was not wrong.
However, we can easily handle this misalignment for all direct 8-byte
operations and for direct 16-byte loads.
We must retain 16-byte alignment for 16-byte stores, so that we don't have
to probe for writability of a second page before performing the first of
two 8-byte stores. We also retain 8-byte alignment for no-fault loads,
since they are rare and it's not worth extending the helpers for this.
Backports commit cb21b4da6cca1bb4e3f5fefb698fb9e4d00c8f66 from qemu
At the same time, fix a problem with stqf_asi, when
a write might access two pages.
Backports commit f939ffe5a022a8798824e2720ed5a14186fca6b6 from qemu
Now that we never call out to helpers when direct accesses can
handle an asi, remove the corresponding code in those helpers.
For ldda, this removes the entire helper.
Backports commit 918d9a2c9d36378a3cf6636018900a4731c83b9d from qemu
As used by HelenOS, presumably for ultra 2 and 3,
prior to the sun4v platform and the current twinx names.
Backports commit 34a6e13da70b2c798630a8dbd03d09f201c0198f from qemu
It's handy to have a mmu idx for physical addresses, so
that mmu disabled and physical access asis can use the
same path as normal accesses.
Backports commit af7a06bac7d3abb2da48ef3277d2a415772d2ae8 from qemu
Several helpers call helper_raise_exception directly, which requires
in turn that their callers have performed save_state. The new function
allows a TCG return address to be passed in so that we can restore
PC + NPC + flags data from that.
This fixes a bug in the usage of helper_check_align, whose callers had
not been calling save_state. It fixes another bug in which the divide
helpers used GETPC at a level other than the direct callee from TCG.
This allows the translator to avoid save_state prior to SAVE, RESTORE,
and FLUSHW instructions.
Backports commit 2f9d35fc4006122bad33f9ae3e2e51d2263e98ee from qemu
There is no need to make sure that the memory is zeroed after the
allocation if we also immediatly fill the whole buffer afterwards
with memcpy(). Thus g_new0 should be g_new instead. But since we
are also doing a memcpy() here, we can also simply replace both
with g_memdup() instead.
Backports commit a337f295defad7eb977da4d6317cf70f7f2fa4b4 from qemu
Instead of using -1 as end of chain, use 0, and link through the 0
entry as a fully circular double-linked list.
Backports commit dcb8e75870e2de199db853697f8839cb603beefe from qemu
By arranging for explicit writes to cpu_fsr after floating point
operations, we are able to mark the helpers as not writing to
tcg globals, which means that we don't need to invalidate the
integer register set across said calls.
Backports commit 7385aed20db5d83979f683b9d0048674411e963c from qemu
We've now implemented all fp asis inline, except for the no-fault
memory reads. The latter can be passed directly to helper_ld_asi.
Backports commit f2fe396f0fae6b389169f65abf294df9ae6cfee5 from qemu
Replace gen_get_asi, and use it for both 32-bit and 64-bit.
For v8, do supervisor and immediate checks here.
Also, move save_state and TB ending into the respective
subroutines, out of disas_sparc_insn.
Backports commit 7ec1e5ea4bd0700fa48da86bffa2fcc6146c410a from qemu
Knowing the value of %asi at translation time means that we
can handle the common settings without a function call.
The steady state appears to be %asi == ASI_P, so that sparcv9
code can use offset forms of lda/sta. The %asi register gets
pushed and popped on entry to certain functions, but it rarely
takes on values other than ASI_P or ASI_AIUP. Therefore we're
unlikely to be expanding the set of TBs created.
Backports commit a6d567e523ed7e928861f3caa5d49368af3f330d from qemu
We now have a single copy of gen_ld_asi, gen_st_asi,
gen_swap_asi, and everything uses gen_get_asi.
Backports commit 22e700607aeaff5f5e139d0fdc3d861e5502040c from qemu
Doing this instead of saving the raw PS_PRIV and TL. This means
that all nucleus mode TBs (TL > 0) can be shared. This fixes a
bug in that we didn't include HS_PRIV in the TB flags, and so could
produce incorrect TB matches for hypervisor state.
The LSU and DMMU states were unused by the translator. Including
them in TB flags meant unnecessary mismatches from tb_find_fast.
Backports commit 99a230638a3674e921224dbe628159c867d734b1 from qemu
The global is only ever read for one insn; we can just as well
use a load from env instead and generate the same code. This
also allows us to indicate the the associated helpers do not
touch TCG globals.
Backports commit e86ceb0d652baa5738e05a59ee0e7989dafbeaa1 from qemu
Most of them use guard symbols like CPU_$target_H, but we also have
__MIPS_CPU_H__ and __TRICORE_CPU_H__. They all upset
scripts/clean-header-guards.pl.
The script dislikes CPU_$target_H because they don't match their file
name (they should, to make guard collisions less likely). The others
are reserved identifiers.
Clean them all up: use guard symbol $target_CPU_H for
target-$target/cpu.h.
Backports commit 07f5a258750b3b9a6e10fd5ec3e29c9a943b650e from qemu
There are functions tlb_fill(), cpu_unaligned_access() and
do_unaligned_access() that are called with access type and mmu index
arguments. But these arguments are named 'is_write' and 'is_user' in their
declarations. The patches fix the arguments to avoid a confusion.
Backports commit b35399bb4e9968296a12303b00f9f2066470e987 from qemu
Make SPARC target use sparc_cpu_parse_features() directly
so it won't get in the way of switching other propertified
targets to handling features as global properties.
Backports commit fb02d56e96d553088c5b4267a3c954a3e952a50a from qemu
Information is tracked inside the TCGContext structure, and later used
by tracing events with the 'tcg' and 'vcpu' properties.
The 'cpu' field is used to check tracing of translation-time
events ("*_trans"). The 'tcg_env' field is used to pass it to
execution-time events ("*_exec").
Backports commit 7c2550432abe62f53e6df878ceba6ceaf71f0e7e from qemu
exec-all.h contains TCG-specific definitions. It is not needed outside
TCG-specific files such as translate.c, exec.c or *helper.c.
One generic function had snuck into include/exec/exec-all.h; move it to
include/qom/cpu.h.
Backports commit 63c915526d6a54a95919ebece83fa9ca631b2508 from qemu
