Separate shift + extract low will result in one extra insn
for hosts like RISC-V, MIPS, and Sparc.
Backports commit 664b7e3b97d6376f3329986c465b3782458b0f8b from qemu
All of the inputs to these instructions are 32-bits. Rather than
extend each input to 64-bits and then extract the high 32-bits of
the output, use tcg_gen_muls2_i32 and other 32-bit generator functions.
Backports commit 5f8cd06ebcf57420be8fea4574de2e074de46709 from qemu
Rotate is the more compact and obvious way to swap 16-bit
elements of a 32-bit word.
Backports commit adefba76e8bf10dfb342094d2f5debfeedb1a74d from qemu
The helper function is more documentary, and also already
handles the case of rotate by zero.
Backports commit dd861b3f29be97a9e3cdb9769dcbc0c7d7825185 from qemu
The immediate shift generator functions already test for,
and eliminate, the case of a shift by zero.
Backports commit 464eaa9571fae5867d9aea7d7209c091c8a50223 from qemu
Unless we're guaranteed to always increase ARM_MAX_VQ by a multiple of
four, then we should use DIV_ROUND_UP to ensure we get an appropriate
array size.
Backports commit 46417784d21c89446763f2047228977bdc267895 from qemu
The current implementation of ZCR_ELx matches the architecture, only
implementing the lower four bits, with the rest RAZ/WI. This puts
a strict limit on ARM_MAX_VQ of 16. Make sure we don't let ARM_MAX_VQ
grow without a corresponding update here.
Backports commit 7b351d98709d3f77d6bb18562e1bf228862b0d57 from qemu
Replace x = double_saturate(y) with x = add_saturate(y, y).
There is no need for a separate more specialized helper.
Backports commit 640581a06d14e2d0d3c3ba79b916de6bc43578b0 from qemu
Promote this function from aarch64 to fully general use.
Use it to unify the code sequences for generating illegal
opcode exceptions.
Backports commit 3cb36637157088892e9e33ddb1034bffd1251d3b from qemu
Unlike the other more generic gen_exception{,_internal}_insn
interfaces, breakpoints always refer to the current instruction.
Backports commit 06bcbda3f64d464b6ecac789bce4bd69f199cd68 from qemu
The offset is variable depending on the instruction set.
Passing in the actual value is clearer in intent.
Backpors commit aee828e7541a5895669ade3a4b6978382b6b094a from qemu
We must update s->base.pc_next when we return from the translate_insn
hook to the main translator loop. By incrementing s->base.pc_next
immediately after reading the insn word, "pc_next" contains the address
of the next instruction throughout translation.
All remaining uses of s->pc are referencing the address of the next insn,
so this is now a simple global replacement. Remove the "s->pc" field.
Backports commit a04159166b880b505ccadc16f2fe84169806883d from qemu
Provide a common routine for the places that require ALIGN(PC, 4)
as the base address as opposed to plain PC. The two are always
the same for A32, but the difference is meaningful for thumb mode.
Backports commit 16e0d8234ef9291747332d2c431e46808a060472 from qemu
We currently have 3 different ways of computing the architectural
value of "PC" as seen in the ARM ARM.
The value of s->pc has been incremented past the current insn,
but that is all. Thus for a32, PC = s->pc + 4; for t32, PC = s->pc;
for t16, PC = s->pc + 2. These differing computations make it
impossible at present to unify the various code paths.
With the newly introduced s->pc_curr, we can compute the correct
value for all cases, using the formula given in the ARM ARM.
This changes the behaviour for load_reg() and load_reg_var()
when called with reg==15 from a 32-bit Thumb instruction:
previously they would have returned the incorrect value
of pc_curr + 6, and now they will return the architecturally
correct value of PC, which is pc_curr + 4. This will not
affect well-behaved guest software, because all of the places
we call these functions from T32 code are instructions where
using r15 is UNPREDICTABLE. Using the architectural PC value
here is more consistent with the T16 and A32 behaviour.
Backports commit fdbcf6329d0c2984c55d7019419a72bf8e583c36 from qemu
Add a new field to retain the address of the instruction currently
being translated. The 32-bit uses are all within subroutines used
by a32 and t32. This will become less obvious when t16 support is
merged with a32+t32, and having a clear definition will help.
Convert aarch64 as well for consistency. Note that there is one
instance of a pre-assert fprintf that used the wrong value for the
address of the current instruction.
Backports commit 43722a6d4f0c92f7e7e1e291580039b0f9789df1 from qemu
This function is used in two different contexts, and it will be
clearer if the function is given the address to which it applies.
Backports commit 331b1ca616cb708db30dab68e3262d286e687f24 from qemu
When generating an architectural single-step exception we were
routing it to the "default exception level", which is to say
the same exception level we execute at except that EL0 exceptions
go to EL1. This is incorrect because the debug exception level
can be configured by the guest for situations such as single
stepping of EL0 and EL1 code by EL2.
We have to track the target debug exception level in the TB
flags, because it is dependent on CPU state like HCR_EL2.TGE
and MDCR_EL2.TDE. (That we were previously calling the
arm_debug_target_el() function to determine dc->ss_same_el
is itself a bug, though one that would only have manifested
as incorrect syndrome information.) Since we are out of TB
flag bits unless we want to expand into the cs_base field,
we share some bits with the M-profile only HANDLER and
STACKCHECK bits, since only A-profile has this singlestep.
Fixes: https://bugs.launchpad.net/qemu/+bug/1838913
Backports commit 8bd587c1066f4456ddfe611b571d9439a947d74c from qemu
Factor out code to 'generate a singlestep exception', which is
currently repeated in four places.
To do this we need to also pull the identical copies of the
gen-exception() function out of translate-a64.c and translate.c
into translate.h.
(There is a bug in the code: we're taking the exception to the wrong
target EL. This will be simpler to fix if there's only one place to
do it.)
Backports commit c1d5f50f094ab204accfacc2ee6aafc9601dd5c4 from qemu
While most features are now detected by probing the ID_* registers
kernels can (and do) use MIDR_EL1 for working out of they have to
apply errata. This can trip up warnings in the kernel as it tries to
work out if it should apply workarounds to features that don't
actually exist in the reported CPU type.
Avoid this problem by synthesising our own MIDR value.
Backports commit 2bd5f41c00686a1f847a60824d0375f3df2c26bf from qemu
rt==15 is a special case when reading the flags: it means the
destination is APSR. This patch avoids rejecting vmrs apsr_nzcv, fpscr
as illegal instruction.
Backports commit cdc6896659b85f7ed8f7552850312e55170de0c5 from qemu
An attempt to do an exception-return (branch to one of the magic
addresses) in linux-user mode for M-profile should behave like
a normal branch, because linux-user mode is always going to be
in 'handler' mode. This used to work, but we broke it when we added
support for the M-profile security extension in commit d02a8698d7ae2bfed.
In that commit we allowed even handler-mode calls to magic return
values to be checked for and dealt with by causing an
EXCP_EXCEPTION_EXIT exception to be taken, because this is
needed for the FNC_RETURN return-from-non-secure-function-call
handling. For system mode we added a check in do_v7m_exception_exit()
to make any spurious calls from Handler mode behave correctly, but
forgot that linux-user mode would also be affected.
How an attempted return-from-non-secure-function-call in linux-user
mode should be handled is not clear -- on real hardware it would
result in return to secure code (not to the Linux kernel) which
could then handle the error in any way it chose. For QEMU we take
the simple approach of treating this erroneous return the same way
it would be handled on a CPU without the security extensions --
treat it as a normal branch.
The upshot of all this is that for linux-user mode we should never
do any of the bx_excret magic, so the code change is simple.
This ought to be a weird corner case that only affects broken guest
code (because Linux user processes should never be attempting to do
exception returns or NS function returns), except that the code that
assigns addresses in RAM for the process and stack in our linux-user
code does not attempt to avoid this magic address range, so
legitimate code attempting to return to a trampoline routine on the
stack can fall into this case. This change fixes those programs,
but we should also look at restricting the range of memory we
use for M-profile linux-user guests to the area that would be
real RAM in hardware.
Backports commit 9027d3fba605d8f6093342ebe4a1da450d374630 from qemu
The function neon_store_reg32() doesn't free the TCG temp that it
is passed, so the caller must do that. We got this right in most
places but forgot to free the TCG temps in trans_VMOV_64_sp().
Backports commit 38fb634853ac6547326d9f88b9a068d9fc6b4ad4 from qemu
In Arm v8.0 M-profile CPUs without the Security Extension and also in
v7M CPUs, there is no NSACR register. However, the code we have to handle
the FPU does not always check whether the ARM_FEATURE_M_SECURITY bit
is set before testing whether env->v7m.nsacr permits access to the
FPU. This means that for a CPU with an FPU but without the Security
Extension we would always take a bogus fault when trying to stack
the FPU registers on an exception entry.
We could fix this by adding extra feature bit checks for all uses,
but it is simpler to just make the internal value of nsacr 0xcff
("all non-secure accesses allowed"), since this is not guest
visible when the Security Extension is not present. This allows
us to continue to follow the Arm ARM pseudocode which takes a
similar approach. (In particular, in the v8.1 Arm ARM the register
is documented as reading as 0xcff in this configuration.)
Fixes: https://bugs.launchpad.net/qemu/+bug/1838475
Backports commit 02ac2f7f613b47f6a5b397b20ab0e6b2e7fb89fa from qemu
Most Arm architectural debug exceptions (eg watchpoints) are ignored
if the configured "debug exception level" is below the current
exception level (so for example EL1 can't arrange to get debug exceptions
for EL2 execution). Exceptions generated by the BRK or BPKT instructions
are a special case -- they must always cause an exception, so if
we're executing above the debug exception level then we
must take them to the current exception level.
This fixes a bug where executing BRK at EL2 could result in an
exception being taken at EL1 (which is strictly forbidden by the
architecture).
Fixes: https://bugs.launchpad.net/qemu/+bug/1838277
Backports commit 987a23224218fa3bb3aa0024ad236dcf29ebde9e from qemu
In arm_cpu_realizefn() we make several assertions about the values of
guest ID registers:
* if the CPU provides AArch32 v7VE or better it must advertise the
ARM_DIV feature
* if the CPU provides AArch32 A-profile v6 or better it must
advertise the Jazelle feature
These are essentially consistency checks that our ID register
specifications in cpu.c didn't accidentally miss out a feature,
because increasingly the TCG emulation gates features on the values
in ID registers rather than using old-style checks of ARM_FEATURE_FOO
bits.
Unfortunately, these asserts can cause problems if we're running KVM,
because in that case we don't control the values of the ID registers
-- we read them from the host kernel. In particular, if the host
kernel is older than 4.15 then it doesn't expose the ID registers via
the KVM_GET_ONE_REG ioctl, and we set up dummy values for some
registers and leave the rest at zero. (See the comment in
target/arm/kvm64.c kvm_arm_get_host_cpu_features().) This set of
dummy values is not sufficient to pass our assertions, and so on
those kernels running an AArch32 guest on AArch64 will assert.
We could provide a more sophisticated set of dummy ID registers in
this case, but that still leaves the possibility of a host CPU which
reports bogus ID register values that would cause us to assert. It's
more robust to only do these ID register checks if we're using TCG,
as that is the only case where this is truly a QEMU code bug.
Backports commit 8f4821d77e465bc2ef77302d47640d5a43d92b30 from qemu
Reported by GCC9 when building with -Wimplicit-fallthrough=2:
target/arm/helper.c: In function ‘arm_cpu_do_interrupt_aarch32_hyp’:
target/arm/helper.c:7958:14: error: this statement may fall through [-Werror=implicit-fallthrough=]
7958 | addr = 0x14;
| ~~~~~^~~~~~
target/arm/helper.c:7959:5: note: here
7959 | default:
| ^~~~~~~
cc1: all warnings being treated as errors
Backports commit 9bbb4ef991fa93323f87769a6e217c2b9273a128 from qemu
In the M-profile architecture, when we do a vector table fetch and it
fails, we need to report a HardFault. Whether this is a Secure HF or
a NonSecure HF depends on several things. If AIRCR.BFHFNMINS is 0
then HF is always Secure, because there is no NonSecure HardFault.
Otherwise, the answer depends on whether the 'underlying exception'
(MemManage, BusFault, SecureFault) targets Secure or NonSecure. (In
the pseudocode, this is handled in the Vector() function: the final
exc.isSecure is calculated by looking at the exc.isSecure from the
exception returned from the memory access, not the isSecure input
argument.)
We weren't doing this correctly, because we were looking at
the target security domain of the exception we were trying to
load the vector table entry for. This produces errors of two kinds:
* a load from the NS vector table which hits the "NS access
to S memory" SecureFault should end up as a Secure HardFault,
but we were raising an NS HardFault
* a load from the S vector table which causes a BusFault
should raise an NS HardFault if BFHFNMINS == 1 (because
in that case all BusFaults are NonSecure), but we were raising
a Secure HardFault
Correct the logic.
We also fix a comment error where we claimed that we might
be escalating MemManage to HardFault, and forgot about SecureFault.
(Vector loads can never hit MPU access faults, because they're
always aligned and always use the default address map.)
Backports commit 51c9122e92b776a3f16af0b9282f1dc5012e2a19 from qemu
The ARMv5 architecture didn't specify detailed per-feature ID
registers. Now that we're using the MVFR0 register fields to
gate the existence of VFP instructions, we need to set up
the correct values in the cpu->isar structure so that we still
provide an FPU to the guest.
This fixes a regression in the arm926 and arm1026 CPUs, which
are the only ones that both have VFP and are ARMv5 or earlier.
This regression was introduced by the VFP refactoring, and more
specifically by commits 1120827fa182f0e76 and 266bd25c485597c,
which accidentally disabled VFP short-vector support and
double-precision support on these CPUs.
Backports commit cb7cef8b32033f6284a47d797edd5c19c5491698 from qemu
When we converted to using feature bits in 602f6e42cfbf we missed out
the fact (dp && arm_dc_feature(s, ARM_FEATURE_V8)) was supported for
-cpu max configurations. This caused a regression in the GCC test
suite. Fix this by setting the appropriate bits in mvfr1.FPHP to
report ARMv8-A with FP support (but not ARMv8.2-FP16).
Fixes: https://bugs.launchpad.net/qemu/+bug/1836078
Backports commit 45b1a243b81a7c9ae56235937280711dd9914ca7 from qemu
In commit e9d652824b0 we extracted the vfp_set_fpscr_to_host()
function but failed at calling it in the correct place, we call
it after xregs[ARM_VFP_FPSCR] is modified.
Fix by calling this function before we update FPSCR.
Backports commit 85795187f416326f87177cabc39fae1911f04c50 from qemu
Off by one error in the EL2 and EL3 tests. Remove the test
against EL3 entirely, since it must always be true.
Backports commit 6a02a73211c5bc634fccd652777230954b83ccba from qemu
Coverity points out (CID 1402195) that the loop in trans_VMOV_imm_dp()
that iterates over the destination registers in a short-vector VMOV
accidentally throws away the returned updated register number
from vfp_advance_dreg(). Add the missing assignment. (We got this
correct in trans_VMOV_imm_sp().)
Backports commit 89a11ff756410aecb87d2c774df6e45dbf4105c1 from qemu
Thumb instructions in an IT block are set up to be conditionally
executed depending on a set of condition bits encoded into the IT
bits of the CPSR/XPSR. The architecture specifies that if the
condition bits are 0b1111 this means "always execute" (like 0b1110),
not "never execute"; we were treating it as "never execute". (See
the ConditionHolds() pseudocode in both the A-profile and M-profile
Arm ARM.)
This is a bit of an obscure corner case, because the only legal
way to get to an 0b1111 set of condbits is to do an exception
return which sets the XPSR/CPSR up that way. An IT instruction
which encodes a condition sequence that would include an 0b1111 is
UNPREDICTABLE, and for v8A the CONSTRAINED UNPREDICTABLE choices
for such an IT insn are to NOP, UNDEF, or treat 0b1111 like 0b1110.
Add a comment noting that we take the latter option.
Backports commit 5529de1e5512c05276825fa8b922147663fd6eac from qemu
In the various helper functions for v7M/v8M instructions, use
the _ra versions of cpu_stl_data() and friends. Otherwise we
may get wrong behaviour or an assert() due to not being able
to locate the TB if there is an exception on the memory access
or if it performs an IO operation when in icount mode
Backports commit 2884fbb60412049ec92389039ae716b32057382e from qemu
In preparation for supporting TCG disablement on ARM, we move most
of TCG related v7m/v8m helpers and APIs into their own file.
Note: It is easier to review this commit using the 'histogram'
diff algorithm:
$ git diff --diff-algorithm=histogram ...
or
$ git diff --histogram ...
Backports commit 7aab5a8c8bb525ea390b4ebc17ab82c0835cfdb6 from qemu
Semihosting hooks either SVC or HLT instructions, and inside KVM
both of those go to EL1, ie to the guest, and can't be trapped to
KVM.
Let check_for_semihosting() return False when not running on TCG.
backports commit 91f78c58da9ba78c8ed00f5d822b701765be8499 from qemu
In the next commit we will split the M-profile functions from this
file. Some function will be called out of helper.c. Declare them in
the "internals.h" header.
Backports commit 787a7e76c2e93a48c47b324fea592c9910a70483 from qemu
This code is specific to the SoftFloat floating-point
implementation, which is only used by TCG.
Backports commit 4a15527c9feecfd2fa2807d5e698abbc19feb35f from qemu
The vfp_set_fpscr() helper contains code specific to the host
floating point implementation (here the SoftFloat library).
Extract this code to vfp_set_fpscr_from_host().
Backports commit 0c6ad94809b37a1f0f1f75d3cd0e4a24fb77e65c from qemu
The vfp_set_fpscr() helper contains code specific to the host
floating point implementation (here the SoftFloat library).
Extract this code to vfp_set_fpscr_to_host().
Backports commit e9d652824b05845f143ef4797d707fae47d4b3ed from qemu
To ease the review of the next commit,
move the vfp_exceptbits_to_host() function directly after
vfp_exceptbits_from_host(). Amusingly the diff shows we
are moving vfp_get_fpscr().
Backports commit 20e62dd8c831c9065ed4a8e64813c93ad61c50d7 from qemu.
These routines are TCG specific.
The arm_deliver_fault() function is only used within the new
helper. Make it static.
Backports commit e21b551cb652663f2f2405a64d63ef6b4a1042b7 from qemu
In the next commit we will split the TLB related routines of
this file, and this function will also be called in the new
file. Declare it in the "internals.h" header.
Backports commit ebae861fc6c385a7bcac72dde4716be06e6776f1 from qemu
Those helpers are a software implementation of the ARM v8 memory zeroing
op code. They should be moved to the op helper file, which is going to
eventually be built only when TCG is enabled.
Backports commit 6cdca173ef81a9dbcee9e142f1a5a34ad9c44b75 from qemu
