We can now use the CPUClass hook instead of a named function.
Create a static tlb_fill function to avoid other changes within
cputlb.c. This also isolates the asserts within. Remove the
named tlb_fill function from all of the targets.
Backports commit c319dc13579a92937bffe02ad2c9f1a550e73973 from qemu
Note that env->pc is removed from the qemu_log as that value is garbage.
The PC isn't recovered until cpu_restore_state, called from
cpu_loop_exit_restore, called from riscv_raise_exception.
Backports commit 8a4ca3c10a96be6ed7f023b685b688c4d409bbcb from qemu
Note that env->active_tc.PC is removed from the qemu_log as that value
is garbage. The PC isn't recovered until cpu_restore_state, called from
cpu_loop_exit_restore, called from do_raise_exception_err.
Backports commit 931d019f5b2e7bbacb162869497123be402ddd86 from qemu
Since the only non-negative TLBRET_* value is TLBRET_MATCH,
the subsequent test for ret < 0 is useless. Use early return
to allow subsequent blocks to be unindented.
Backports commit e38f4eb63020075432cb77bf48398187809cf4a3 from qemu
At present we give ret = 0, or TLBRET_MATCH. This gets matched
by the default case, which falls through to TLBRET_BADADDR.
However, it makes more sense to use a proper value. All of the
tlb-related exceptions are handled identically in cpu_loop.c,
so TLBRET_BADADDR is as good as any other. Retain it.
Backports commit 995ffde9622c01f5b307cab47f9bd7962ac09db2 from qemu
This hook will replace the (user-only mode specific) handle_mmu_fault
hook, and the (system mode specific) tlb_fill function.
The handle_mmu_fault hook was written as if there was a valid
way to recover from an mmu fault, and had 3 possible return states.
In reality, the only valid action is to raise an exception,
return to the main loop, and deliver the SIGSEGV to the guest.
Note that all of the current implementations of handle_mmu_fault
for guests which support linux-user do in fact only ever return 1,
which is the signal to return to the main loop.
Using the hook for system mode requires that all targets be converted,
so for now the hook is (optionally) used only from user-only mode.
Backports commit da6bbf8513e621a8fc2fd315d77318f36547474d from qemu
Remove a function of the same name from target/arm/.
Use a branchless implementation of abs gleaned from gcc.
Backports commit ff1f11f7f8710a768f9313f24bd7f509d3db27e5 from qemu
Allow expansion either via shift by scalar or by replicating
the scalar for shift by vector.
Backports commit b4578cd91cda4cef1c413304353ca6dc5b957b60 from qemu
The gvec expanders perform a modulo on the shift count. If the target
requires alternate behaviour, then it cannot use the generic gvec
expanders anyway, and will have to have its own custom code.
Backports commit 5ee5c14cacda27e904cd6b0d9e7ffe1acff42838 from qemu
Allow the backend to expand dup from memory directly, instead of
forcing the value into a temp first. This is especially important
if integer/vector register moves do not exist.
Note that officially tcg_out_dupm_vec is allowed to fail.
If it did, we could fix this up relatively easily:
VECE == 32/64:
Load the value into a vector register, then dup.
Both of these must work.
VECE == 8/16:
If the value happens to be at an offset such that an aligned
load would place the desired value in the least significant
end of the register, go ahead and load w/garbage in high bits.
Load the value w/INDEX_op_ld{8,16}_i32.
Attempt a move directly to vector reg, which may fail.
Store the value into the backing store for OTS.
Load the value into the vector reg w/TCG_TYPE_I32, which must work.
Duplicate from the vector reg into itself, which must work.
All of which is well and good, except that all supported
hosts can support dupm for all vece, so all of the failure
paths would be dead code and untestable.
Backports commit 37ee55a081b7863ffab2151068dd1b2f11376914 from qemu
The LD1R instruction does all the work. Note that the only
useful addressing mode is a base register with no offset.
Backports commit f23e5e15edfd49d5dd72cab2ed2d85ac354b2eeb from qemu
This case is similar to INDEX_op_mov_* in that we need to do
different things depending on the current location of the source.
Backports commit bab1671f0fa928fd678a22f934739f06fd5fd035 from qemu
The i386 backend already has these functions, and the aarch64 backend
could easily split out one. Nothing is done with these functions yet,
but this will aid register allocation of INDEX_op_dup_vec in a later patch.
Adjust the aarch64 tcg_out_dupi_vec signature to match the new interface.
Backports commit e7632cfa8b76cdbbc1c76e8737338ef5844e7d60 from qemu
PowerPC Altivec does not support direct moves between vector registers
and general registers. So when tcg_out_mov fails, we can use the
backing memory for the temporary to perform the move.
Backports commit 240c08d0998f402c325fce489de0d14831048128 from qemu
This patch merely changes the interface, aborting on all failures,
of which there are currently none.
Backports commit 78113e83e0007e869c9f0cb4c0497a77538988e3 from qemu
We have a function that takes an additional condition parameter
over the standard backend interface. It already takes care of
eliding no-op moves.
Backports commit c16f52b2c5d91c36e121795bd3b386cea0b7573c from qemu
The only fixed_reg is cpu_env, and it should not be modified
during any TB. Therefore code that tries to special-case moves
into a fixed_reg is dead. Remove it.
Backports commit d63e3b6e694ad6c887be135dddb9cd4893f1a844 from qemu
Replace the single opcode in .opc with a null-terminated
array in .opt_opc. We still require that all opcodes be
used with the same .vece.
Validate the contents of this list with CONFIG_DEBUG_TCG.
All tcg_gen_*_vec functions will check any list active
during .fniv expansion. Swap the active list in and out
as we expand other opcodes, or take control away from the
front-end function.
Convert all existing vector aware front ends.
Backports commit 53229a7703eeb2bbe101a19a33ef22aaf960c65b from qemu
PowerPC Altivec does not support add and subtract of 64-bit elements.
Prepare for that configuration by not assuming the operation is
universally supported.
Backports commit ce27c5d1a38e93da38653af71fb468c5eded4c7b from qemu
Use tcg_can_emit_vec_op instead of just TCG_TARGET_HAS_neg_vec,
so that we check the type and vece for the actual operation.
Backports commit ac383dde33405106469d04a78de1d76f1a730cb1 from qemu
Let's add tcg_gen_gvec_3i(), similar to tcg_gen_gvec_2i(), however
without introducing "gen_helper_gvec_3i *fnoi", as it isn't needed
for now.
Backports commit e1227bb6e59173117f094a6a13b998587b45c928 from qemu
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Backports commit a8b991b52dcde75ab5065046653626951aac666d from qemu
This is less tricky than for loads, because we always fall
back to single byte stores to implement unaligned stores.
Backports commit 4601f8d10d7628bcaf2a8179af36e04b42879e91 from qemu
If we attempt to recurse from load_helper back to load_helper,
even via intermediary, we do not get all of the constants
expanded away as desired.
But if we recurse back to the original helper (or a shim that
has a consistent function signature), the operands are folded
away as desired.
Backports commit 2dd926067867c2dd19e66d31a7990e8eea7258f6 from qemu
Going to approach this problem via __attribute__((always_inline))
instead, but full conversion will take several steps.
Backports commit fc1bc777910dc14a3db4e2ad66f3e536effc297d from qemu
Having this in io_readx/io_writex meant that we forgot to
re-compute index after tlb_fill. It also means we can use
the normal aligned memory load path. It also fixes a bug
in that we had cached a use of index across a tlb_fill.
Backports commit f1be36969de2fb9b6b64397db1098f115210fcd9 from qemu
Instead of expanding a series of macros to generate the load/store
helpers we move stuff into common functions and rely on the compiler
to eliminate the dead code for each variant.
Backports commit eed5664238ea5317689cf32426d9318686b2b75c from qemu
Currently the dc_zva helper function uses a variable length
array. In fact we know (as the comment above remarks) that
the length of this array is bounded because the architecture
limits the block size and QEMU limits the target page size.
Use a fixed array size and assert that we don't run off it.
Backports commit 63159601fb3e396b28da14cbb71e50ed3f5a0331 from qemu
In the M-profile architecture, if the CPU implements the DSP extension
then the XPSR has GE bits, in the same way as the A-profile CPSR. When
we added DSP extension support we forgot to add support for reading
and writing the GE bits, which are stored in env->GE. We did put in
the code to add XPSR_GE to the mask of bits to update in the v7m_msr
helper, but forgot it in v7m_mrs. We also must not allow the XPSR we
pull off the stack on exception return to set the nonexistent GE bits.
Correct these errors:
* read and write env->GE in xpsr_read() and xpsr_write()
* only set GE bits on exception return if DSP present
* read GE bits for MRS if DSP present
Backports commit f1e2598c46d480c9e21213a244bc514200762828 from qemu
I encountered the following compilation error on mingw:
/mnt/d/qemu/include/qemu/osdep.h:97:9: error: '__USE_MINGW_ANSI_STDIO' macro redefined [-Werror,-Wmacro-redefined]
\#define __USE_MINGW_ANSI_STDIO 1
^
/mnt/d/llvm-mingw/aarch64-w64-mingw32/include/_mingw.h:433:9: note: previous definition is here
\#define __USE_MINGW_ANSI_STDIO 0 /* was not defined so it should be 0 */
It turns out that __USE_MINGW_ANSI_STDIO must be set before any
system headers are included, not just before stdio.h.
Backports commit 946376c21be1cd9dcc3c7936b204b113781603f7 from qemu
Assuming that the ISA clearly describes how to determine
the length of the instruction, and the ISA has a reasonable
maximum instruction length, the input to the decoder can be
right-justified in an appropriate insn word.
This is not 100% convenient, as out-of-line %fields are
numbered relative to the maximum instruction length, but
this appears to still be usable.
Backports commit 17560e9349ff1fcce814184b37993f92378cf0c4 from qemu
