The code sequence we were generating was only good for unsigned
comparisons. For signed comparisions, use the sequence from gcc.
Fixes booting of ppc64 firmware, with a patch changing the code
sequence for ppc comparisons.
Backports commit 7170ac33135e6ecf89752d3949bcecf9b9766d1c from qemu
It is more typical to provide the ';' by the caller of a macro
than to embed it in the macro itself; this is because syntax
highlight engines can get confused if a macro is called without
a semicolon before the closing '}'.
Backports commit 94f5c480e9b5ce95394026b3f025816470e23eaf from qemu
Move generic make flags in MAKEFLAGS (SUBDIR_MAKEFLAGS is more qemu specific).
Use --quiet to silence make 'is up to date' message.
Backports commit 42a77f1ce4934b243df003f95bda88530631387a from qemu
Instead of ignoring the response from address_space_ld*()
(indicating an attempt to read a page table descriptor from
an invalid physical address), use it to report the failure
correctly.
Since this is another couple of locations where we need to
decide the value of the ARMMMUFaultInfo ea bit based on a
MemTxResult, we factor out that operation into a helper
function.
Backports commit 3b39d734141a71296d08af3d4c32f872fafd782e from qemu
For PMSAv7, the v7A/R Arm ARM defines that setting AP to 0b111
is an UNPREDICTABLE reserved combination. However, for v7M
this value is documented as having the same behaviour as 0b110:
read-only for both privileged and unprivileged. Accept this
value on an M profile core rather than treating it as a guest
error and a no-access page.
Backports commit 8638f1ad7403b63db880dadce38e6690b5d82b64 from qemu
Refactor disas_thumb2_insn() so that it generates the code for raising
an UNDEF exception for invalid insns, rather than returning a flag
which the caller must check to see if it needs to generate the UNDEF
code. This brings the function in to line with the behaviour of
disas_thumb_insn() and disas_arm_insn().
Backports commit 2eea841c11096e8dcc457b80e21f3fbdc32d2590 from qemu
ldxp loads two consecutive doublewords from memory regardless of CPU
endianness. On store, stlxp currently assumes to work with a 128bit
value and consequently switches order in big-endian mode. With this
change it packs the doublewords in reverse order in anticipation of the
128bit big-endian store operation interposing them so they end up in
memory in the right order. This makes it work for both MTTCG and !MTTCG.
It effectively implements the ARM ARM STLXP operation pseudo-code:
data = if BigEndian() then el1:el2 else el2:el1;
With this change an aarch64_be Linux 4.14.4 kernel succeeds to boot up
in system emulation mode.
Backports commit 0785557f8811133bd69be02aeccf018d47a26373 from qemu
This code is preventing the MMU debug code from displaying virtual
mappings of IO devices (anything that is not located in the RAM).
Before this patch, Qemu would output 0xffffffffffffffff (-1) as the
physical address corresponding to an IO device virtual address.
With this patch the intended physical address is displayed.
Backports commit 7e450a8f50ac12fc8f69b6ce555254c84efcf407 from qemu
Add the third stack pointer, the Interrupt Stack Pointer (ISP)
(680x0 only). This stack will be needed in softmmu mode.
Update movec to set/get the value of the three stacks.
Backports commit 6e22b28e22aa6ed1b8db6f24da2633868019d4c9 from qemu
Some cleanup, and allows SR to be moved from any addressing mode.
Previous code was wrong for coldfire: coldfire also allows to
use addressing mode to set SR/CCR. It only supports Data register
to get SR/CCR (move from)
Backports commit b6a21d8d8f69ac04fd6180e752a65d582c07e948 from qemu
The instruction traps if the CPU is not in
Supervisor state but the helper is empty because
there is no easy way to reset all the peripherals
without resetting the CPU itself.
Backports commit 0bdb2b3bf5660f892ddbfa09baea56cdca57ad1d from qemu
Add cache lines invalidate and cache lines push
as no-op operations, as we don't have cache.
These instructions are 68040 only.
Backports commit f58ed1c50add3e76331afdc92387c0da9dd9e443 from qemu
move16 moves the source line to the destination line. Lines are aligned
to 16-byte boundaries and are 16 bytes long.
Backports commit 9d4f0429f3dc1dc6c67de3eaa3106e6c1cfa1524 from qemu
chk and chk2 compare a value to boundaries, and
trigger a CHK exception if the value is out of bounds.
Backports commit 8bf6cbaf396a8b54b138bb8a7c3377f2868ed16e from qemu
As gen_helper_get_ccr() is able to compute CCR from cc_op and
flags, we don't need to flush flags before to call it.
flush_flags() and get_ccr() use COMPUTE_CCR() to compute
flags. get_ccr() computes CCR value,
whereas flush_flags update live cc_op and flags.
Backports commit 4131c242cc850aaf76e59d4c787d220f07850cf5 from qemu
And remove update_cc_op() from gen_exception() because there is
one in gen_jmp_im().
Backports commit 7cd7b5ca9be805e8a4ced4c07014c24e34812f27 from qemu
We had two fields specific to INDEX_op_call. Rename these and
add some macros so that the fields may be reused for other opcodes.
Backports commit cd9090aa9dbba30db8aec9a2fc103aaf1ab0f5a7 from qemu
With no fixed array allocation, we can't overflow a buffer.
This will be important as optimizations related to host vectors
may expand the number of ops used.
Use QTAILQ to link the ops together.
Backports commit 15fa08f8451babc88d733bd411d4c94976f9d0f8 from qemu
cpu_restore_state officially supports being passed an address it can't
resolve the state for. As a result the checks in the helpers are
superfluous and can be removed. This makes the code consistent with
other users of cpu_restore_state.
Of course this does nothing to address what to do if cpu_restore_state
can't resolve the state but so far it seems this is handled elsewhere.
The change was made with included coccinelle script.
Backports commit 65255e8efdd5fca602bcc4ff61a879939ff75f4f from qemu
The first call of set_cc_op() in a new translation sequence
is done with old_op set to CC_OP_DYNAMIC (-1).
This will do an out of bound access to the array cc_op_live[].
We fix that by adding an entry in cc_op_live[] for CC_OP_DYNAMIC.
Backports commit 7deddf96e94f3e1eb3677db0ea7b53e61751b544 from qemu
Renaming cpu address space names so that they won't be the same when
there are more than one.
Backports commit 87a621d857be1b2b3dd1d0847ca311a863dbcb53 from qemu
Normally we create an address space for that CPU and pass that address
space into the function. Let's just do it inside to unify address space
creations. It'll simplify my next patch to rename those address spaces.
Backports commit 80ceb07a83375e3a0091591f96bd47bce2f640ce from qemu
These gcc warnings are fixed:
target/i386/translate.c:4461:12: warning:
variable 'prefixes' might be clobbered by 'longjmp' or 'vfork' [-Wclobbered]
target/i386/translate.c:4466:9: warning:
variable 'rex_w' might be clobbered by 'longjmp' or 'vfork' [-Wclobbered]
target/i386/translate.c:4466:16: warning:
variable 'rex_r' might be clobbered by 'longjmp' or 'vfork' [-Wclobbered]
Tested with x86_64-w64-mingw32-gcc from Debian stretch.
Backports commit a4926d99129a1d8072fc4681cd4efdb214f65ed4 from qemu
Intel IceLake cpu has added new cpu features,AVX512_VBMI2/GFNI/
VAES/VPCLMULQDQ/AVX512_VNNI/AVX512_BITALG. Those new cpu features
need expose to guest VM.
The bit definition:
CPUID.(EAX=7,ECX=0):ECX[bit 06] AVX512_VBMI2
CPUID.(EAX=7,ECX=0):ECX[bit 08] GFNI
CPUID.(EAX=7,ECX=0):ECX[bit 09] VAES
CPUID.(EAX=7,ECX=0):ECX[bit 10] VPCLMULQDQ
CPUID.(EAX=7,ECX=0):ECX[bit 11] AVX512_VNNI
CPUID.(EAX=7,ECX=0):ECX[bit 12] AVX512_BITALG
The release document ref below link:
https://software.intel.com/sites/default/files/managed/c5/15/\
architecture-instruction-set-extensions-programming-reference.pdf
Backports commit aff9e6e46a343e1404498be4edd03db1112f0950 from qemu
For some systems (i.e. FreeBSD) the default 'make' is not compatible with the
GNU extensions used by QEMU makefiles.
Calling the GNU make (gmake) works, however the help displayed refers to the
host 'make' and copy/paste leads to lot of unobvious errors:
$ gmake check-help
[...]
make check Run all tests
$ make check
make: "Makefile" line 28: Missing dependency operator
make: "Makefile" line 37: Need an operator
make: "Makefile" line 41: warning: duplicate script for target "git-submodule-update" ignored
make: "rules.mak" line 70: warning: duplicate script for target "%.o" ignored
make: Unknown modifier ' '
make: Unclosed substitution for eval modules (= missing)
make: "tests/Makefile.include" line 24: Variable/Value missing from "export"
make: "tests/" line 1: warning: Zero byte read from file, skipping rest of line.
make: "tests/" line 1: Need an operator
make: "Makefile" line 660: warning: duplicate script for target "ifneq" ignored
make: "Makefile" line 78: warning: using previous script for "ifneq" defined here
make: Fatal errors encountered -- cannot continue
Using the $(MAKE) variable, the help displayed is consistent with the 'make'
program used.
Backports commit b98a3bae2596fd9bf60f140d042c8e993daba930 from qemu
This was never used since its introduction in commit
196ea13104f8 ("memory: Add global-locking property to memory
regions").
Backports commit e2fbe20851ceec5ccd7b539a89db0420393fb85d from qemu
SPARC Linux has an oddity that it insists that mmap()
of MAP_FIXED memory must be at an alignment defined by
SHMLBA, which is more aligned than the page size
(typically, SHMLBA alignment is to 16K, and pages are 8K).
This is a relic of ancient hardware that had cache
aliasing constraints, but even on modern hardware the
kernel still insists on the alignment.
To ensure that we get mmap() alignment sufficient to
make the kernel happy, change QEMU_VMALLOC_ALIGN,
qemu_fd_getpagesize() and qemu_mempath_getpagesize()
to use the maximum of getpagesize() and SHMLBA.
In particular, this allows 'make check' to pass on Sparc:
we were previously failing the ivshmem tests.
Backports commit 57d1f6d7ce23e79a8ebe4a57bd2363b269b4664b from qemu
Now that do_ats_write() is entirely in control of whether to
generate a 32-bit PAR or a 64-bit PAR, we can make it use the
correct (complicated) condition for doing so.
Backports commit 1313e2d7e2cd8b21741e0cf542eb09dfc4188f79 from qemu
All of the callers of get_phys_addr() and arm_tlb_fill() now ignore
the FSR values they return, so we can just remove the argument
entirely.
Backports commit bc52bfeb3be2052942b7dac8ba284f342ac9605b from qemu
In do_ats_write(), rather than using the FSR value from get_phys_addr(),
construct the PAR values using the information in the ARMMMUFaultInfo
struct. This allows us to create a PAR of the correct format regardless
of what the translation table format is.
For the moment we leave the condition for "when should this be a
64 bit PAR" as it was previously; this will need to be fixed to
properly support AArch32 Hyp mode.
Backports commit 5efe9ed45dec775ebe91ce72bd805ee780d16064 from qemu
Now that ARMMMUFaultInfo is guaranteed to have enough information
to construct a fault status code, we can pass it in to the
deliver_fault() function and let it generate the correct type
of FSR for the destination, rather than relying on the value
provided by get_phys_addr().
I don't think there are any cases the old code was getting
wrong, but this is more obviously correct.
Backports commit 681f9a89d201d7891e2c60dff5e5415d8f618518 from qemu
Make get_phys_addr_pmsav8() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Backports commit 3f551b5b7380ff131fe22944aa6f5b166aa13caf from qemu
Make get_phys_addr_pmsav7() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Backports commit 9375ad15338b24e06109071ac3a85df48a2cc2e6 from qemu
Make get_phys_addr_pmsav5() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Note that PMSAv5 does not define any guest-visible fault status
register, so the different "fsr" values we were previously
returning are entirely arbitrary. So we can just switch to using
the most appropriae fi->type values without worrying that we
need to special-case FaultInfo->FSC conversion for PMSAv5.
Backports commit 53a4e5c5b07b2f50c538511b74b0d3d4964695ea from qemu
Make get_phys_addr_v6() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Backports commit da909b2c23a68e57bbcb6be98229e40df606f0c8 from qemu
Make get_phys_addr_v6() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Backports commit f06cf243945ccb24cb9578304306ae7fcb4cf3fd from qemu
Make get_phys_addr_v5() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Backports commit f989983e8dc9be6bc3468c6dbe46fcb1501a740c from qemu
All the callers of arm_ldq_ptw() and arm_ldl_ptw() ignore the value
that those functions store in the fsr argument on failure: if they
return failure to their callers they will always overwrite the fsr
value with something else.
Remove the argument from these functions and S1_ptw_translate().
This will simplify removing fsr from the calling functions.
Backports commit 3795a6de9f7ec4a7e3dcb8bf02a88a014147b0b0 from qemu
