Going to approach this problem via __attribute__((always_inline))
instead, but full conversion will take several steps.
Backports commit fc1bc777910dc14a3db4e2ad66f3e536effc297d from qemu
Having this in io_readx/io_writex meant that we forgot to
re-compute index after tlb_fill. It also means we can use
the normal aligned memory load path. It also fixes a bug
in that we had cached a use of index across a tlb_fill.
Backports commit f1be36969de2fb9b6b64397db1098f115210fcd9 from qemu
Instead of expanding a series of macros to generate the load/store
helpers we move stuff into common functions and rely on the compiler
to eliminate the dead code for each variant.
Backports commit eed5664238ea5317689cf32426d9318686b2b75c from qemu
Currently the dc_zva helper function uses a variable length
array. In fact we know (as the comment above remarks) that
the length of this array is bounded because the architecture
limits the block size and QEMU limits the target page size.
Use a fixed array size and assert that we don't run off it.
Backports commit 63159601fb3e396b28da14cbb71e50ed3f5a0331 from qemu
In the M-profile architecture, if the CPU implements the DSP extension
then the XPSR has GE bits, in the same way as the A-profile CPSR. When
we added DSP extension support we forgot to add support for reading
and writing the GE bits, which are stored in env->GE. We did put in
the code to add XPSR_GE to the mask of bits to update in the v7m_msr
helper, but forgot it in v7m_mrs. We also must not allow the XPSR we
pull off the stack on exception return to set the nonexistent GE bits.
Correct these errors:
* read and write env->GE in xpsr_read() and xpsr_write()
* only set GE bits on exception return if DSP present
* read GE bits for MRS if DSP present
Backports commit f1e2598c46d480c9e21213a244bc514200762828 from qemu
I encountered the following compilation error on mingw:
/mnt/d/qemu/include/qemu/osdep.h:97:9: error: '__USE_MINGW_ANSI_STDIO' macro redefined [-Werror,-Wmacro-redefined]
\#define __USE_MINGW_ANSI_STDIO 1
^
/mnt/d/llvm-mingw/aarch64-w64-mingw32/include/_mingw.h:433:9: note: previous definition is here
\#define __USE_MINGW_ANSI_STDIO 0 /* was not defined so it should be 0 */
It turns out that __USE_MINGW_ANSI_STDIO must be set before any
system headers are included, not just before stdio.h.
Backports commit 946376c21be1cd9dcc3c7936b204b113781603f7 from qemu
Assuming that the ISA clearly describes how to determine
the length of the instruction, and the ISA has a reasonable
maximum instruction length, the input to the decoder can be
right-justified in an appropriate insn word.
This is not 100% convenient, as out-of-line %fields are
numbered relative to the maximum instruction length, but
this appears to still be usable.
Backports commit 17560e9349ff1fcce814184b37993f92378cf0c4 from qemu
Now that we have curr_cflags, we can include CF_USE_ICOUNT
early and then remove it as necessary.
Backports commit 416986d3f97329655e30da7271a2d11c6d707b06 from qemu
Now that all code generation has been converted to check CF_PARALLEL, we can
generate !CF_PARALLEL code without having yet set !parallel_cpus --
and therefore without having to be in the exclusive region during
cpu_exec_step_atomic.
While at it, merge cpu_exec_step into cpu_exec_step_atomic.
Backports commit ac03ee5331612e44beb393df2b578c951d27dc0d from qemu
Thereby decoupling the resulting translated code from the current state
of the system.
The tb->cflags field is not passed to tcg generation functions. So
we add a field to TCGContext, storing there a copy of tb->cflags.
Most architectures have <= 32 registers, which results in a 4-byte hole
in TCGContext. Use this hole for the new field.
Backports commit e82d5a2460b0e176128027651ff9b104e4bdf5cc from qemu
Thereby decoupling the resulting translated code from the current state
of the system.
Backports commit 87d757d60d66d5ee1608460b0f1e07e2b758db9c from qemu
Thereby decoupling the resulting translated code from the current state
of the system.
Backports commit f0ddf11b23260f0af84fb529486a8f9ba2d19401 from qemu
Thereby decoupling the resulting translated code from the current state
of the system.
Backports commit b5e3b4c2aca8eb5a9cfeedfb273af623f17c3731 from qemu
Thereby decoupling the resulting translated code from the current state
of the system.
Backports commit 2399d4e7cec22ecf1c51062d2ebfd45220dbaace from qemu
We were generating code during tb_invalidate_phys_page_range,
check_watchpoint, cpu_io_recompile, and (seemingly) discarding
the TB, assuming that it would magically be picked up during
the next iteration through the cpu_exec loop.
Instead, record the desired cflags in CPUState so that we request
the proper TB so that there is no more magic.
Backports commit 9b990ee5a3cc6aa38f81266fb0c6ef37a36c45b9 from qemu
This will enable us to decouple code translation from the value
of parallel_cpus at any given time. It will also help us minimize
TB flushes when generating code via EXCP_ATOMIC.
Note that the declaration of parallel_cpus is brought to exec-all.h
to be able to define there the "curr_cflags" inline.
Backports commit 4e2ca83e71b51577b06b1468e836556912bd5b6e from qemu
Unless overridden via an env var or configure arg, QEMU will only look
for the 'python' binary in $PATH. This is unhelpful on distros which
are only shipping Python 3.x (eg Fedora) in their default install as,
if they comply with PEP 394, the bare 'python' binary won't exist.
This changes configure so that by default it will search for all three
common python binaries, preferring to find Python 3.x versions.
Backports commit faf441429adfe5767be52c5dcdb8bc03161d064f from qemu
When running "make" in a build directory from the pre-Kconfig merge time,
the build process currently fails with:
make: *** No rule to make target `.../default-configs/pci.mak',
needed by `aarch64-softmmu/config-devices.mak'. Stop.
To make sure that this problem at least goes away when the user runs
"configure" (or "sh config.status") again, we have to make sure that
we re-generate the .mak.d files. Thus remove the old stale files
while running the configure script.
Backports commit 9c79024225af6b3ae04ea2dd94a5e5c4132a9e65 from qemu
Without the -Wno-typedef-redefinition option, clang complains if a typedef
gets redefined in gnu99 mode (since this is officially a C11 feature). This
used to also happen with older versions of GCC, but since we've bumped our
minimum GCC version to 4.8, all versions of GCC that we support do not seem
to issue this warning in gnu99 mode anymore. So this has become a common
problem for people who only test their code with GCC - they do not notice
the issue until they submit their patches and suddenly patchew or a
maintainer complains.
Now that we do not urgently need to keep the code clean from typedef
redefintions anymore with recent versions of GCC, we can ease the
situation with clang, too, and simply shut these warnings off for good.
Backports commit e6e90feedb706b1b92827a5977b37e1e8defb8ef from qemu
The M-profile architecture floating point system supports
lazy FP state preservation, where FP registers are not
pushed to the stack when an exception occurs but are instead
only saved if and when the first FP instruction in the exception
handler is executed. Implement this in QEMU, corresponding
to the check of LSPACT in the pseudocode ExecuteFPCheck().
Backports commit e33cf0f8d8c9998a7616684f9d6aa0d181b88803 from qemu
Pushing registers to the stack for v7M needs to handle three cases:
* the "normal" case where we pend exceptions
* an "ignore faults" case where we set FSR bits but
do not pend exceptions (this is used when we are
handling some kinds of derived exception on exception entry)
* a "lazy FP stacking" case, where different FSR bits
are set and the exception is pended differently
Implement this by changing the existing flag argument that
tells us whether to ignore faults or not into an enum that
specifies which of the 3 modes we should handle.
Backports commit a356dacf647506bccdf8ecd23574246a8bf615ac from qemu
In the v7M architecture, if an exception is generated in the process
of doing the lazy stacking of FP registers, the handling of
possible escalation to HardFault is treated differently to the normal
approach: it works based on the saved information about exception
readiness that was stored in the FPCCR when the stack frame was
created. Provide a new function armv7m_nvic_set_pending_lazyfp()
which pends exceptions during lazy stacking, and implements
this logic.
This corresponds to the pseudocode TakePreserveFPException().
Backports the relevant parts of commit
a99ba8ab1601904e0fa20325192fc850362ce80e from qemu
Add a new helper function which returns the MMU index to use
for v7M, where the caller specifies all of the security
state, privilege level and whether the execution priority
is negative, and reimplement the existing
arm_v7m_mmu_idx_for_secstate_and_priv() in terms of it.
We are going to need this for the lazy-FP-stacking code.
Backports commit fa6252a988dbe440cd6087bf93cbe0887f0c401b from qemu
The M-profile FPCCR.ASPEN bit indicates that automatic floating-point
context preservation is enabled. Before executing any floating-point
instruction, if FPCCR.ASPEN is set and the CONTROL FPCA/SFPA bits
indicate that there is no active floating point context then we
must create a new context (by initializing FPSCR and setting
FPCA/SFPA to indicate that the context is now active). In the
pseudocode this is handled by ExecuteFPCheck().
Implement this with a new TB flag which tracks whether we
need to create a new FP context.
Backports commit 6000531e19964756673a5f4b694a649ef883605a from qemu
The M-profile FPCCR.S bit indicates the security status of
the floating point context. In the pseudocode ExecuteFPCheck()
function it is unconditionally set to match the current
security state whenever a floating point instruction is
executed.
Implement this by adding a new TB flag which tracks whether
FPCCR.S is different from the current security state, so
that we only need to emit the code to update it in the
less-common case when it is not already set correctly.
Note that we will add the handling for the other work done
by ExecuteFPCheck() in later commits.
Backports commit 6d60c67a1a03be32c3342aff6604cdc5095088d1 from qemu
We are close to running out of TB flags for AArch32; we could
start using the cs_base word, but before we do that we can
economise on our usage by sharing the same bits for the VFP
VECSTRIDE field and the XScale XSCALE_CPAR field. This
works because no XScale CPU ever had VFP.
Backports commit ea7ac69d124c94c6e5579145e727adec9ccbefef from qemu
Move the NS TBFLAG down from bit 19 to bit 6, which has not
been used since commit c1e3781090b9d36c60 in 2015, when we
started passing the entire MMU index in the TB flags rather
than just a 'privilege level' bit.
This rearrangement is not strictly necessary, but means that
we can put M-profile-only bits next to each other rather
than scattered across the flag word.
Backports commit 7fbb535f7aeb22896fedfcf18a1eeff48165f1d7 from qemu
Handle floating point registers in exception return.
This corresponds to pseudocode functions ValidateExceptionReturn(),
ExceptionReturn(), PopStack() and ConsumeExcStackFrame().
Backports commit 6808c4d2d2826920087533f517472c09edc7b0d2 from qemu
The magic value pushed onto the callee stack as an integrity
check is different if floating point is present.
Backports commit 0dc51d66fcfcc4c72011cdafb401fd876ca216e7 from qemu
The TailChain() pseudocode specifies that a tail chaining
exception should sanitize the excReturn all-ones bits and
(if there is no FPU) the excReturn FType bits; we weren't
doing this.
Backports commit 60fba59a2f9a092a44b688df5d058cdd6dd9c276 from qemu
For v8M floating point support, transitions from Secure
to Non-secure state via BLNS and BLXNS must clear the
CONTROL.SFPA bit. (This corresponds to the pseudocode
BranchToNS() function.)
Backports commit 3cd6726f0ba7cc77342ee721bd86094e13b2a42a from qemu
Implement the code which updates the FPCCR register on an
exception entry where we are going to use lazy FP stacking.
We have to defer to the NVIC to determine whether the
various exceptions are currently ready or not.
Backports commit b593c2b81287040ab6f452afec6281e2f7ee487b from qemu
Handle floating point registers in exception entry.
This corresponds to the FP-specific parts of the pseudocode
functions ActivateException() and PushStack().
We defer the code corresponding to UpdateFPCCR() to a later patch.
Backports commit 0ed377a8013f40653a83f6ad2c9693897522d7dc from qemu
Currently the code in v7m_push_stack() which detects a violation
of the v8M stack limit simply returns early if it does so. This
is OK for the current integer-only code, but won't work for the
floating point handling we're about to add. We need to continue
executing the rest of the function so that we check for other
exceptions like not having permission to use the FPU and so
that we correctly set the FPCCR state if we are doing lazy
stacking. Refactor to avoid the early return.
Backports commit 3432c79a4e7345818d2defcf9e61a1bcb2907f9f from qemu
The M-profile CONTROL register has two bits -- SFPA and FPCA --
which relate to floating-point support, and should be RES0 otherwise.
Handle them correctly in the MSR/MRS register access code.
Neither is banked between security states, so they are stored
in v7m.control[M_REG_S] regardless of current security state.
Backports commit 2e1c5bcd32014c9ede1b604ae6c2c653de17fc53 from qemu
If the floating point extension is present, then the SG instruction
must clear the CONTROL_S.SFPA bit. Implement this.
(On a no-FPU system the bit will always be zero, so we don't need
to make the clearing of the bit conditional on ARM_FEATURE_VFP.)
Backports commit 1702071302934af77a072b7ee7c5eadc45b37573 from qemu
Correct the decode of the M-profile "coprocessor and
floating-point instructions" space:
* op0 == 0b11 is always unallocated
* if the CPU has an FPU then all insns with op1 == 0b101
are floating point and go to disas_vfp_insn()
For the moment we leave VLLDM and VLSTM as NOPs; in
a later commit we will fill in the proper implementation
for the case where an FPU is present.
Backports commit 8859ba3c9625e7ceb5599f457a344bcd7c5e112b from qemu
Like AArch64, M-profile floating point has no FPEXC enable
bit to gate floating point; so always set the VFPEN TB flag.
M-profile also has CPACR and NSACR similar to A-profile;
they behave slightly differently:
* the CPACR is banked between Secure and Non-Secure
* if the NSACR forces a trap then this is taken to
the Secure state, not the Non-Secure state
Honour the CPACR and NSACR settings. The NSACR handling
requires us to borrow the exception.target_el field
(usually meaningless for M profile) to distinguish the
NOCP UsageFault taken to Secure state from the more
usual fault taken to the current security state.
Backports commit d87513c0abcbcd856f8e1dee2f2d18903b2c3ea2 from qemu
The only "system register" that M-profile floating point exposes
via the VMRS/VMRS instructions is FPSCR, and it does not have
the odd special case for rd==15. Add a check to ensure we only
expose FPSCR.
Backports commit ef9aae2522c22c05df17dd898099dd5c3f20d688 from qemu
The M-profile floating point support has three associated config
registers: FPCAR, FPCCR and FPDSCR. It also makes the registers
CPACR and NSACR have behaviour other than reads-as-zero.
Add support for all of these as simple reads-as-written registers.
We will hook up actual functionality later.
The main complexity here is handling the FPCCR register, which
has a mix of banked and unbanked bits.
Note that we don't share storage with the A-profile
cpu->cp15.nsacr and cpu->cp15.cpacr_el1, though the behaviour
is quite similar, for two reasons:
* the M profile CPACR is banked between security states
* it preserves the invariant that M profile uses no state
inside the cp15 substruct
Backports commit d33abe82c7c9847284a23e575e1078cccab540b5 from qemu
