In the PAC computation, sbox was applied over wrong bits.
As this is a 4-bit sbox, bit index should be incremented by 4 instead of 16.
Test vector from QARMA paper (https://eprint.iacr.org/2016/444.pdf) was
used to verify one computation of the pauth_computepac() function which
uses sbox2.
Launchpad: https://bugs.launchpad.net/bugs/1859713
Backports commit de0b1bae6461f67243282555475f88b2384a1eb9 from qemu
The PMU is not optional on cortex-r5 and cortex-r5f (see
the "Features" chapter of the Technical Reference Manual).
Backports commit 90f671581ac601fcc1b840d9e9abe7e3c3e672db from qemu
A regression that was introduced, with the refactor to TranslatorOps,
drops two lines that update the PC when single-stepping is being performed.
Fixes: 11ab74b01e0a ("target/m68k: Convert to TranslatorOps")
Backports commit 322f244aaa80a5208090d41481c1c09c6face66b from qemu
During the conversion to decodetree, the setting of
ISSIs16Bit got lost. This causes the guest os to
incorrectly adjust trapping memory operations.
Backports commit 1a1fbc6cbb34c26d43d8360c66c1d21681af14a9 from qemu
The IL bit is set for 32-bit instructions, thus passing false
with the is_16bit parameter to syn_data_abort_with_iss() makes
a syn mask that always has the IL bit set.
Pass is_16bit as true to make the initial syn mask have IL=0,
so that the final IL value comes from or'ing template_syn.
Cc: qemu-stable@nongnu.org
Fixes: aaa1f954d4ca ("target-arm: A64: Create Instruction Syndromes for Data Aborts")
Backports commit 30d544839e278dc76017b9a42990c41e84a34377 from qemu
The wfi instruction can be configured to be trapped by a higher exception
level, such as the EL2 hypervisor. When the instruction is trapped, the
program counter should contain the address of the wfi instruction that
caused the exception. The program counter is adjusted for this in the wfi op
helper function.
However, this correction is done to env->pc, which only applies to AArch64
mode. For AArch32, the program counter is stored in env->regs[15]. This
adds an if-else statement to modify the correct program counter location
based on the the current CPU mode.
Backports commit 855532912b0e1bf803ae393e5b0c7e80948cd6a4 from qemu
The SPSR register is named within the Unicorn headers, but the code
to access it is absent. This means that it will always read as 0 and
ignore writes. This makes it harder to work with changes in processor
mode, as the usual way to return from a CPU exception is a
`MOVS pc, lr` for undefined instructions or `SUBS pc, lr, #4`
for most other aborts - which implicitly restores the CPSR from SPSR.
This change adds the access to the SPSR so that it can be read and
written as the caller might expect.
Backports commit 99097cab4c39fb3fc50eea8f0006954f62a149b2 from unicorn.
Under some circumstances, the PC is not fixed up properly when
returning from the execution of a block in cpu_tb_exec. This appears
to be caused by the resetting of the PC from the tb.
This change removes the additional fixup in the cases where there
is code tracing or timing active. Either of these cases would result
in the wrong PC being reported.
Closes unicorn-engine#1105.
Backports commit b59632fb645d456338472e3d757c065c0ed74ad5 from unicorn
Calling emu_stop and causing the pc value to be incorrect after the end of the run. (#1157)
Backports commit 83887b8193dfeca3e5e8da851b41f874bcd0514e from unicorn.
* fix a mem-leak.
* check the uc and l1_map before using them.
* fix multi-level free bug.
* Add pointer check.
Backports commit 79d89e5d3b83c6ee5d523738bc488d1e44b06f6a from unicorn.
* first draft for an invalid instruction hook
* Fixed documentation on return value of invalid insn hook
Backports commit 07f94ad1fc62293cac330df9714d739be6354926 from unicorn
Fixes:
target/arm/translate-a64.c: In function 'disas_crypto_three_reg_sha512':
target/arm/translate-a64.c:13625:9: error: 'genfn' may be used uninitialized in this function [-Werror=maybe-uninitialized]
genfn(tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
qemu/target/arm/translate-a64.c:13609:8: error: 'feature' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (!feature) {
Backports commit c7a5e7910517e2711215a9e869a733ffde696091 from qemu
It lacks VMX features and two security feature bits (disclosed recently) in
MSR_IA32_ARCH_CAPABILITIES in current Cooperlake CPU model, so add them.
Fixes: 22a866b6166d ("i386: Add new CPU model Cooperlake")
Backports commit 2dea9d9ca4ea7e9afe83d0b4153b21a16987e866 from qemu
The bit 6, 7 and 8 of MSR_IA32_ARCH_CAPABILITIES are recently disclosed
for some security issues. Add the definitions for them to be used by named
CPU models.
Backports commit 6c997b4adb300788d61d72e2b8bc67c03a584956 from qemu
Before we introduce blocking semihosting calls we need to ensure we
can restart the system on semi hosting exception. To be able to do
this the EXCP_SEMIHOST operation should be idempotent until it finally
completes. Practically this means ensureing we only update the pc
after the semihosting call has completed.
Backports commit 4ff5ef9e911c670ca10cdd36dd27c5395ec2c753 from qemu
All semihosting exceptions are dealt with earlier in the common code
so we should never get here.
Backports commit b906acbb3aceed5b1eca30d9d365d5bd7431400b from qemu
Python 3.5 is the oldest Python version available on our
supported build platforms, and Python 2 end of life will be 3
weeks after the planned release date of QEMU 4.2.0. Drop Python
2 support from configure completely, and require Python 3.5 or
newer.
Backports commit ddf90699631db53c981b6a5a63d31c08e0eaeec7 from qemu
qemu_strtoi64() assumes int64_t is long long. This is marked FIXME.
Replace by a QEMU_BUILD_BUG_ON() to avoid surprises.
Same for qemu_strtou64().
Fix a typo in qemu_strtoul()'s contract while there.
Backports commit 369276ebf3cbba419653a19a01b790f3bcf3aea7 from qemu
Cooper Lake is intel's successor to Cascade Lake, the new
CPU model inherits features from Cascadelake-Server, while
add one platform associated new feature: AVX512_BF16. Meanwhile,
add STIBP for speculative execution.
Backports commit 22a866b6166db5caa4abaa6e656c2a431fa60726 from qemu
stibp feature is already added through the following commit.
0e89165829
Add a macro for it to allow CPU models to report it when host supports.
Backports commit 5af514d0cb314f43bc53f2aefb437f6451d64d0c from qemu
Define MSR_ARCH_CAP_MDS_NO in the IA32_ARCH_CAPABILITIES MSR to allow
CPU models to report the feature when host supports it.
Backports commit 77b168d221191156c47fcd8d1c47329dfdb9439e from qemu
A write to the SCR can change the effective EL by droppping the system
from secure to non-secure mode. However if we use a cached current_el
from before the change we'll rebuild the flags incorrectly. To fix
this we introduce the ARM_CP_NEWEL CP flag to indicate the new EL
should be used when recomputing the flags.
Backports partof commit f80741d107673f162e3b097fc76a1590036cc9d1 from
qemu
ARMv8.2 introduced support for Data Cache Clean instructions
to PoP (point-of-persistence) - DC CVAP and PoDP (point-of-deep-persistence)
- DV CVADP. Both specify conceptual points in a memory system where all writes
that are to reach them are considered persistent.
The support provided considers both to be actually the same so there is no
distinction between the two. If none is available (there is no backing store
for given memory) both will result in Data Cache Clean up to the point of
coherency. Otherwise sync for the specified range shall be performed.
Backports commit 0d57b49992200a926c4436eead97ecfc8cc710be from qemu
Add an option to trigger memory writeback to sync given memory region
with the corresponding backing store, case one is available.
This extends the support for persistent memory, allowing syncing on-demand.
Backports commit 61c490e25e081af39ff40556f6c1229b8b011585 from qemu
Background: s390x implements Low-Address Protection (LAP). If LAP is
enabled, writing to effective addresses (before any translation)
0-511 and 4096-4607 triggers a protection exception.
So we have subpage protection on the first two pages of every address
space (where the lowcore - the CPU private data resides).
By immediately invalidating the write entry but allowing the caller to
continue, we force every write access onto these first two pages into
the slow path. we will get a tlb fault with the specific accessed
addresses and can then evaluate if protection applies or not.
We have to make sure to ignore the invalid bit if tlb_fill() succeeds.
Backports commit f52bfb12143e29d7c8bd827bdb751aee47a9694e from qemu
... similar to tlb_vaddr_to_host(); however, allow access to the host
page except when TLB_NOTDIRTY or TLB_MMIO is set.
Backports commit fef39ccd567032d3ad520ed80f3576068e6eb2e3 from qemu
Let size > 0 indicate a promise to write to those bytes.
Check for write watchpoints in the probed range.
Backports commit 03a981893c99faba84bb373976796ad7dce0aecc from qemu
The raising of exceptions from check_watchpoint, buried inside
of the I/O subsystem, is fundamentally broken. We do not have
the helper return address with which we can unwind guest state.
Replace PHYS_SECTION_WATCH and io_mem_watch with TLB_WATCHPOINT.
Move the call to cpu_check_watchpoint into the cputlb helpers
where we do have the helper return address.
This allows watchpoints on RAM to bypass the full i/o access path.
Backports commit 50b107c5d617eaf93301cef20221312e7a986701 from qemu
We had two different mechanisms to force a recheck of the tlb.
Before TLB_RECHECK was introduced, we had a PAGE_WRITE_INV bit
that would immediate set TLB_INVALID_MASK, which automatically
means that a second check of the tlb entry fails.
We can use the same mechanism to handle small pages.
Conserve TLB_* bits by removing TLB_RECHECK.
Backports commit 30d7e098d5c38644359820317fcf72e3e129ec53 from qemu
Factor it out into common code. Similar to the !CONFIG_USER_ONLY variant,
let's not allow to cross page boundaries.
Backports commit 59e96ac6cb13951dd09afc70622858089abf3384 from qemu
We have already aligned page2 to the start of the next page.
There is no reason to do that a second time.
Backports commit 5787585d0406cfd54dda0c71ea1a603347ce6e71 from qemu
We are currently passing the size of the full write to
the tlb_fill for the second page. Instead pass the real
size of the write to that page.
This argument is unused within all tlb_fill, except to be
logged via tracing, so in practice this makes no difference.
But in a moment we'll need the value of size2 for watchpoints,
and if we've computed the value we might as well use it.
Backports commit 8f7cd2ad4acd01242d00807e231097b3de9f0930 from qemu
This bit configures endianness of PCI MMIO devices. It is used by
Solaris and OpenBSD sunhme drivers.
Tested working on OpenBSD.
Unfortunately Solaris 10 had a unrelated keyboard issue blocking
testing... another inch towards Solaris 10 on SPARC64 =)
Backports commit ccdb4c5535f41ee4da2ef158f58fca0327e50dab from qemu
Append MemTxAttrs to interfaces so we can pass along up coming Invert
Endian TTE bit on SPARC64.
Backports commit 9bed46e67e2ee54bc596ba58063ee71a5ca40923 from qemu
Notice new attribute, byte swap, and force the transaction through the
memory slow path.
Required by architectures that can invert endianness of memory
transaction, e.g. SPARC64 has the Invert Endian TTE bit.
Backports commit a26fc6f5152b47f1d7ed928f9c9d462d01ff1624 from qemu
Now that MemOp has been pushed down into the memory API, and
callers are encoding endianness, we can collapse byte swaps
along the I/O path into the accelerator and target independent
adjust_endianness.
Collapsing byte swaps along the I/O path enables additional endian
inversion logic, e.g. SPARC64 Invert Endian TTE bit, with redundant
byte swaps cancelling out.
Backports commit 9bf825bf3df4ebae3af51566c8088e3f1249a910 from qemu
Preparation for collapsing the two byte swaps adjust_endianness and
handle_bswap into the former.
Backports commit be5c4787e9a6eed12fd765d9e890f7cc6cd63220 from qemu
Preparation for collapsing the two byte swaps adjust_endianness and
handle_bswap into the former.
Call memory_region_dispatch_{read|write} with endianness encoded into
the "MemOp op" operand.
This patch does not change any behaviour as
memory_region_dispatch_{read|write} is yet to handle the endianness.
Once it does handle endianness, callers with byte swaps can collapse
them into adjust_endianness.
Backports commit d5d680cacc66ef7e3c02c81dc8f3a34eabce6dfe from qemu
Temporarily no-op size_memop was introduced to aid the conversion of
memory_region_dispatch_{read|write} operand "unsigned size" into
"MemOp op".
Now size_memop is implemented, again hard coded size but with
MO_{8|16|32|64}. This is more expressive and avoids size_memop calls.
Backports commit 07f0834f264a79d6225202bd35ca37f74afb8df1 from qemu
Temporarily no-op size_memop was introduced to aid the conversion of
memory_region_dispatch_{read|write} operand "unsigned size" into
"MemOp op".
Now size_memop is implemented, again hard coded size but with
MO_{8|16|32|64}. This is more expressive and avoids size_memop calls.
Backports commit 4574664677116dedb29b12150137f3888374a857 from qemu
Convert memory_region_dispatch_{read|write} operand "unsigned size"
into a "MemOp op".
Backports commit e67c904668d82ca4416cd91d37d9f5abcceef747 from qemu
