AArch32 translation code does not distinguish between DISAS_UPDATE and
DISAS_JUMP. Thus, we cannot use any of them without first updating PC in
CPU state. Furthermore, it is too complicated to update PC in CPU state
before PC gets updated in disas context. So it is hardly possible to
correctly end TB early if is is not likely to be executed before calling
disas_*_insn(), e.g. just after calling breakpoint check helper.
Modify DISAS_UPDATE and DISAS_JUMP usage in AArch32 translation and
apply to them the same semantic as AArch64 translation does:
- DISAS_UPDATE: update PC in CPU state when finishing translation
- DISAS_JUMP: preserve current PC value in CPU state when finishing
translation
This patch fixes a bug in AArch32 breakpoint handling: when
check_breakpoints helper does not generate an exception, ending the TB
early with DISAS_UPDATE couldn't update PC in CPU state and execution
hangs.
Backports commit 577bf808958d06497928c639efaa473bf8c5e099 from qemu
Do not raise a CPU exception if no CPU breakpoint has fired, since
singlestep is also done by generating a debug internal exception. This
fixes a bug with singlestepping in gdbstub.
Backports commit 5c629f4ff4dc9ae79cc732f59a8df15ede796ff7 from qemu
Adding an assertion to qobject_decref() will ensure that a
programming error causing use-after-free will result in
immediate failure (provided no other thread has started
using the memory) instead of silently attempting to wrap
refcnt around and leaving the problem to potentially bite
later at a harder point to diagnose.
Backports commit cc9f60d4a2a4bf2578a9309a18f1c4602c9f5ce7 from qemu
Now these instructions are handled by TCG and can be added to the
TCG_7_0_EBX_FEATURES macro.
Backports commit 0c47242b519a224279f13c685aa6e79347f97b85 from qemu
Detect the clflushopt and pcommit instructions and check their
corresponding feature flags, instead of checking CPUID_SSE and
CPUID_CLFLUSH.
Backports commit 891bc821a3ee462b09b1ec436f2891f00ab1f85b from qemu
Accept the clwb instruction (66 0F AE /6) if its corresponding feature
flag is enabled on CPUID[7].
Backports commit 5e1fac2dba7780e0cb2c022d4b39586af70bea0d from qemu
Whenever the MRU cache hits for the list of RAM blocks, qemu_get_ram_block
does an unnecessary write that causes a processor cache line to bounce
from one core to another. This causes a performance hit.
Backports commit 68851b98e5bf6d397498b74f1776801274ab8d48 from qemu
This makes ROM blocks resizeable. This infrastructure is required for other
functionality we have queued.
Backports commit aaf03019175949eda5087329448b8a0033b89479 from qemu
POPCNT is not available on Penryn and older and on Opteron_G2 and older,
and we want to make the default CPU runnable in most hosts, so it won't
be enabled by default in KVM mode.
We should eventually have all features supported by TCG enabled by
default in TCG mode, but as we don't have a good mechanism today to
ensure we have different defaults in KVM and TCG mode, disable POPCNT in
the qemu64 and qemu32 CPU models entirely.
Backports commit 6aa91e4a0237ddcebb85e3a95e166f3b3cfa42ae from qemu
ABM is not available on Sandy Bridge and older, and we want to make the
default CPU runnable in most hosts, so it won't be enabled by default in
KVM mode.
We should eventually have all features supported by TCG enabled by
default in TCG mode, but as we don't have a good mechanism today to
ensure we have different defaults in KVM and TCG mode, disable ABM in
the qemu64 CPU model entirely.
Backports commit 711956722c6764336f8b78a2106e57c55f02f36d from qemu
SSE4a is not available in any Intel CPU, and we want to make the default
CPU runnable in most hosts, so it doesn't make sense to enable it by
default in KVM mode.
We should eventually have all features supported by TCG enabled by
default in TCG mode, but as we don't have a good mechanism today to
ensure we have different defaults in KVM and TCG mode, disable SSE4a in
the qemu64 CPU model entirely.
Backports commit 0909ad24b2769368716c85f79fbb995dbb7041a9 from qemu
Reloading of local variables after sigsetjmp is only needed for some
buggy compilers.
The code which should reload these variables causes compiler warnings
with gcc 4.7 when compiler optimizations are enabled:
cpu-exec.c:204:15: error:
variable ‘cpu’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
cpu-exec.c:207:15: error:
variable ‘cc’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
cpu-exec.c:202:28: error:
argument ‘env’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
Now this code is only used for compilers which need it
(and gcc 4.5.x, x > 0 which does not need it but won't give warnings).
There were bug reports for clang and gcc 4.5.0, while gcc 4.5.1
was reported to work fine without the reload code. For clang it
is not clear which versions are affected, so simply keep the status quo
for all clang compilations. This can be improved later.
Backports commit 0448f5f8b816923b198ab6c32286fd1f3b2f3e45 from qemu
This ensures that cpu_reload_memory_map() is called as soon as
tcg_cpu_address_space_init() is called, and before cpu->memory_dispatch
is used. qemu-system-s390x never changes the address spaces after
tcg_cpu_address_space_init() is called, and thus tcg_commit() is never
called. This causes a SIGSEGV.
Because memory_map_init() will now call mem_commit(), we have to
initialize io_mem_* before address_space_memory and friends.
Backports commit 680a4783dc13f1059c03d11da58193d76c19ead6 from qemu
These messages are disabled by default; a perfect usecase for tracepoints,
which in fact already exist. Add the missing information to them and
stop using qemu_log_mask.
Backports commit 6f94b7d97f7e0e486a70fb06b703442e2c04a29a from qemu
In this mode, referring an invalid element of the source forces the
result to false (table 4-7, last column) but referring an invalid
element of the destination forces the result to true, so the outer
loop should still be run even if some elements of the destination
will be invalid. They will be avoided in the inner loop, which
correctly bounds "i" to validd, but they will still contribute to a
positive outcome of the search.
This fixes tst_strstr in glibc 2.17.
Backports commit 54c54f8b56047d3c2420e1ae06a6a8890c220ac4 from qemu
Except for removing periods and exclamation points, no other changes
were made to the error messages (yet).
Backports relevant parts of commit 8afb900030b93122a40ef4a636d02ba888bdce12 from qemu
Straightforward replacement, except for qemu_kill_report(), which
printed a common part of its error message first, then the applicable
special part. Print each complete message with a single
error_report() instead.
Multi-line messages were replaced by error_report() followed by
error_printf().
The following changes were made to the error messages:
* The "invalid date format" message was reworded to better fit
the new error_report()+error_printf() pattern.
* On the remaining messages, only the trailing newlines, "qemu:" and
"error:" message prefixes were removed.
Backports relevant parts of commit f61eddcb2bb5cbbdd1d911b7e937db9affc29028 from qemu
If this CPU supports EL3, enhance the printing of the current
CPU mode in debug logging to distinguish S from NS modes as
appropriate.
Backports commit 06e5cf7acd1f94ab7c1cd6945974a1f039672940 from qemu
The AArch64 debug CPU display of PSTATE as "PSTATE=200003c5 (flags --C-)"
on the end of the same line as the last of the general purpose registers
is unnecessarily different from the AArch32 display of PSR as
"PSR=200001d3 --C- A svc32" on its own line. Update the AArch64
code to put PSTATE in its own line and in the same format, including
printing the exception level (mode).
Backports commit 08b8e0f527930208a548b424d2ab3103bf3c8c02 from qemu
Correct updating XContext.Region field on mmu exceptions.
If Config3.CTXTC = 0 then the R field of XContext has to be updated
with the value of bits 63..62 of the virtual address upon a TLB
exception.
Also fixed the below line which overs 80 characters.
Backports commit 60270f85cc93d2d34e45b7679c374b1d771f0eeb from qemu
Add SIGRIE (Signal Reserved Instruction Exception) for both MIPS and
microMIPS.
The instruction allows to use the 16-bit code field for software use.
This instruction is introduced by and required as of Release 6.
Backports commit bb238210bb096534b68dab15a87c6ff0bef43672 from qemu
Set Config5.XNP for R6 cores to indicate the extended LL/SC family
of instructions NOT present.
Backports commit 35ac9e342e008e3d47ef18d33a6977fdb99de9cd from qemu
Add Performance Counter (4) and XNP (5) register numbers to RDHWR.
Add check_hwrena() to simplify access control checkings.
Add RDHWR support to microMIPS R6.
Backports commit b00c72180c36510bf9b124e190bd520e3b7e1358 from qemu
Implement the relationship between CP0.Status.KX, SX and UX. It should not
be possible to set UX bit if SX is 0, the same applies for setting SX if
KX is 0.
Backports commit 2dcf7908d9e0274c08911400beb7ed14276bb170 from qemu
In Release 6, the behaviour of WAIT has been modified to make it a
requirement that a processor that has disabled operation as a result of
executing a WAIT will resume operation on arrival of an interrupt even if
interrupts are not enabled.
Backports commit 7540a43a1d9de71fa7a53ccd2bb24a04e2aace41 from qemu
qobject_to_qstring() crashes on null, which is a trap for the unwary.
Return null instead, and simplify a few callers.
Backports commit 7f0278435df1fa845b3bd9556942f89296d4246b from qemu
qobject_to_qlist() crashes on null, which is a trap for the unwary.
Return null instead.
Backports commit 2d6421a90047a83f6722832405fe09571040ea5b from qemu
qobject_to_qfloat() and qobject_to_qint() crash on null, which is a
trap for the unwary. Return null instead, and simplify a few callers.
Backports commit fcf73f66a67f5e58c18216f8c8651e38cf4d90af from qemu
qobject_to_qdict() crashes on null, which is a trap for the unwary.
Return null instead, and simplify a few callers.
Backports commit 89cad9f3ec6b30d7550fb5704475fc9c3393a066 from qemu
qobject_to_qbool() crashes on null, which is a trap for the unwary.
Return null instead, and simplify a few callers.
Backports commit 14b6160099f0caf5dc9d62e637b007bc5d719a96 from qemu
Some targets already had this within their logic, but make sure
it's present for all targets.
Backports commit 522a0d4e3c0d397ffb45ec400d8cbd426dad9d17 from qemu
Reduce the boilerplate required for each target. At the same time,
move the test for breakpoint after calling tcg_gen_insn_start.
Note that arm and aarch64 do not use cpu_breakpoint_test, but still
move the inline test down after tcg_gen_insn_start.
Backports commit b933066ae03d924a92b2616b4a24e7d91cd5b841 from qemu
Left shift of negative values is undefined behavior. Detected by clang:
qemu/target-i386/translate.c:2423:26: runtime error:
left shift of negative value -8
This changes the code to reverse the sign after the left shift.
Backports commit 712b4243c761cb6ab6a4367a160fd2a42e2d4b76 from qemu
Introduce ARMMMUFaultInfo to propagate MMU Fault information
across the MMU translation code path. This is in preparation for
adding Stage-2 translation.
No functional changes.
Backports commit e14b5a23d8c83304559f31397f95d22ada60a19a from qemu
The starting level for S2 pagetable walks is computed
differently from the S1 starting level. Implement the S2
variant.
Backports commit 1853d5a9dcac910322c6cc5b2fddec45fd052d25 from qemu
Rename granule_sz to stride to better match the reference manuals.
No functional change.
Backports commit 973a5434825c076995218868b5b3047e5de400c6 from qemu
Remove the tsz variable and introduce inputsize.
This simplifies the code a little and makes it easier to
compare with the reference manuals.
No functional change.
Backports commit 4ca6a051758edf625a17dfc4ce4ab72edabac170 from qemu
Add support for AArch32 S2 negative t0sz. In preparation for
using 40bit IPAs on AArch32.
Backports commit 4ee38098010240e0b390061fdd0151ff62d80279 from qemu
