We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.
Backports commit fcf5ef2ab52c621a4617ebbef36bf43b4003f4c0 from qemu
In commit c52ab08aee6f7d4717fc6b517174043126bd302f,
the patch snippet for the "syscall" insn got applied to "iret".
Backports commit 410e98146ffde201ab4c778823ac8beaa74c4c3f from qemu
A couple of places where it was easy to identify a right-shift
followed by an extract or and-with-immediate, and the obvious
sign-extract from a high byte register.
Backports commit 04fc2f1c8fc030a11e08e81bb926392c0991282a from qemu
The syscall and sysret instructions behave a bit differently:
TF is checked after the instruction completes.
This allows the o/s to disable #DB at a syscall by adding TF to FMASK.
And then when the sysret is executed the #DB is taken "as if" the
syscall insn just completed.
Backports commit c52ab08aee6f7d4717fc6b517174043126bd302f from qemu
The diff here is uglier than necessary. All this does is to turn
FOO
into:
if (s->prefix & PREFIX_LOCK) {
BAR
} else {
FOO
}
where FOO is the original implementation of an unlocked cmpxchg.
Backports commit ae03f8de45427042ecd10b0941a005f21ecc064c from qemu
This was found with test-i386. The issue is that instructions
such as
addr32 lea (%eax), %rax
did not perform a 32-bit extension, because the LEA translation
skipped the gen_lea_v_seg step. That step does not just add
segments, it also takes care of extending from address size to
pointer size.
Backports commit 620abfb004543404bef1953e25da2ad77352941a from qemu
Instead of using -1 as end of chain, use 0, and link through the 0
entry as a fully circular double-linked list.
Backports commit dcb8e75870e2de199db853697f8839cb603beefe from qemu
'HF_SOFTMMU_MASK' is only set when 'CONFIG_SOFTMMU' is defined. So
there's no need in this flag: test 'CONFIG_SOFTMMU' instead.
Backports commit da6d48e3348bbc266896cf8adf0c33f1eaf5b31f from qemu
Information is tracked inside the TCGContext structure, and later used
by tracing events with the 'tcg' and 'vcpu' properties.
The 'cpu' field is used to check tracing of translation-time
events ("*_trans"). The 'tcg_env' field is used to pass it to
execution-time events ("*_exec").
Backports commit 7c2550432abe62f53e6df878ceba6ceaf71f0e7e from qemu
exec-all.h contains TCG-specific definitions. It is not needed outside
TCG-specific files such as translate.c, exec.c or *helper.c.
One generic function had snuck into include/exec/exec-all.h; move it to
include/qom/cpu.h.
Backports commit 63c915526d6a54a95919ebece83fa9ca631b2508 from qemu
In user mode, there's only a static address translation, TBs are always
invalidated properly and direct jumps are reset when mapping change.
Thus the destination address is always valid for direct jumps and
there's no need to restrict it to the pages the TB resides in.
Backports commit 90aa39a1cc4837360889f0e033ca25cc82100308 from qemu
We don't take care of direct jumps when address mapping changes. Thus we
must be sure to generate direct jumps so that they always keep valid
even if address mapping changes. Luckily, we can only allow to execute a
TB if it was generated from the pages which match with current mapping.
Document tcg_gen_goto_tb() declaration and note the reason for
destination PC limitations.
Some targets with variable length instructions allow TB to straddle a
page boundary. However, we make sure that both of TB pages match the
current address mapping when looking up TBs. So it is safe to do direct
jumps into the both pages. Correct the checks for some of those targets.
Given that, we can safely patch a TB which spans two pages. Remove the
unnecessary check in cpu_exec() and allow such TBs to be patched.
Backports commit 5b053a4a28278bca606eeff7d1c0730df1b047e9 from qemu
We are inconsistent with the type of tb->flags: usage varies loosely
between int and uint64_t. Settle to uint32_t everywhere, which is
superior to both: at least one target (aarch64) uses the most significant
bit in the u32, and uint64_t is wasteful.
Compile-tested for all targets.
Backports commit 89fee74a0f066dfd73830a7b5fa137e87888c870 from qemu
QEMU 2.6 added support for the XSAVE family of instructions, which
includes the XSETBV instruction which allows setting the XCR0
register.
But, when booting Linux kernels with XSAVE support enabled, I was
getting very early crashes where the instruction pointer was set
to 0x3. I tracked it down to a jump instruction generated by this:
gen_jmp_im(s->pc - pc_start);
where s->pc is pointing to the instruction after XSETBV and pc_start
is pointing _at_ XSETBV. Subtract the two and you get 0x3. Whoops.
The fix is to replace this typo with the pattern found everywhere
else in the file when folks want to end the translation buffer.
Richard Henderson confirmed that this is a bug and that this is the
correct fix.
Backports commit 502c8e86ea07294067578292c6d402601c196019 from qemu
We discriminate here between opcodes that are illegal in the current
cpu mode or with illegal arguments (such as modrm.mod == 3) and
encodings that are unknown (such as an unimplemented isa extension).
Backports commit b9f9c5b41aab06479cb1695990b7cca98ef84fc7 from qemu
The patch in 7f0b714 was too simplistic, in that we wound up setting
the flag and then resetting it immediately in gen_eob.
Fixes the reported boot problem with Windows XP.
Backports commit f083d92c03e7a0741d2a9eba774a60d5a3ca772f from qemu
While ADDSEG will only be false in 16-bit mode for LEA, it can be
false even in other cases when 16-bit addresses are obtained via
the 67h prefix in 32-bit mode. In this case, gen_lea_v_seg forgets
to add a nonzero FS or GS base if CS/DS/ES/SS are all zero. This
case is pretty rare but happens when booting Windows 95/98, and
this patch fixes it.
The bug is visible since commit d6a291498, but it was introduced
together with gen_lea_v_seg and it probably could be reproduced
with a "addr16 gs movsb" instruction as early as in commit
ca2f29f555805d07fb0b9ebfbbfc4e3656530977.
Backports commit e2e02a820741ec4d96b8f313b06a2a7ed5e94fbd from qemu
In non-64-bit modes, the instruction always stores 16 bits.
But in 64-bit mode, when the destination is a register, the
instruction can write 32 or 64 bits.
Backports commit a657f79e32422634415c09f3f15c73d610297af5 from qemu
SMSW and LMSW accept register operands, but commit 1906b2a ("target-i386:
Rearrange processing of 0F 01", 2016-02-13) did not account for that.
Backports commit 880f8486503b32a29b653a3c0b3cfc5432012f38 from qemu
This is immediately usable by lea and multi-byte nop,
and will be required to implement parts of the mpx spec.
Backports commit a074ce42a3186bd9f96ef541bb2e01419181dae3 from qemu
