This is to appease sanitizer builds which complain that:
"error: control reaches end of non-void function"
Backports commit 550276ae0a88851edda2cb7fcdd64256dbb8e314 from qemu
Add some notes on the use of the relaxed atomic access helpers and their
importance for defined behaviour in C11's multi-threaded memory model.
Backports commit e653bc6b0ff645c25b8a2eb607c18a5c98b59db6 from qemu
In the ARM v6 architecture, 'sub pc, pc, 1' is not an interworking
branch, so the computed new value is written to r15 as a normal
value. The architecture says that in this case, bits [1:0] of
the value written must be ignored if we are in ARM mode (or
bit [0] ignored if in Thumb mode); this is a change from the
ARMv4/v5 specification that behaviour is UNPREDICTABLE.
Use the correct mask on the PC value when doing a non-interworking
store to PC.
A popular library used on RaspberryPi uses this instruction
as part of a trick to determine whether it is running on
ARMv6 or ARMv7, and we were mishandling the sequence.
Fixes bug: https://bugs.launchpad.net/bugs/1625295
Backports commit 9b6a3ea7a699594162ed3d11e4e04b98568dc5c0 from qemu
Fix the decoding of iss_sf in disas_ld_lit.
The SF (Sixty-Four) field in the ISS (Instruction Specific Syndrome)
is a bit that specifies the width of the register that the
instruction loads to.
If cleared it specifies 32 bits.
If set it specifies 64 bits.
Backports commit 173ff58580b383a7841b18fddb293038c9d40d1c from qemu
Current CPU definition for AMD Opteron third generation includes
features like SSE4a and LAHF_LM support in emulated CPUID. These
features are present in K8 rev.E or K10 CPUs and later. However,
current G3 family and model describe 2nd generation K8 cores instead.
This is incorrect but was considered harmless until our tests found a
problem with linux kernels >= 3.10 (and maybe earlier) which specifically
check for Opteron K8 model when parsing CPUID leaf 0x80000001:
http://lxr.free-electrons.com/source/arch/x86/kernel/cpu/amd.c?v=3.16#L552
This code will disable LAHF_LM feature in /proc/cpuinfo if model number
is inconsistent.
This change sets Opteron_G3 family/model/stepping to 16/2/3 which is
a proper Opteron 3rd generation 2350 CPU.
Backports commit 339892d758efb2d0954160d41736a0eac9875d67 from qemu
A regression was introduced by commit 96193c22a "target-i386:
Move xsave component mask to features array": all
CPUID[EAX=0xD,ECX=0]:EAX bits were being reported as unmigratable
because they don't have feature names defined. This broke
"-cpu host" because it enables only migratable features by
default.
This adds a new field to FeatureWordInfo: migratable_flags, which
will make those features be reported as migratable even if they
don't have a property name defined.
Backports commit 6fb2fff75dceed1716e757882a6dfbadd9042407 from qemu
CPUState is a fairly common pointer to pass to these helpers. This means
if you need other arguments for the async_run_on_cpu case you end up
having to do a g_malloc to stuff additional data into the routine. For
the current users this isn't a massive deal but for MTTCG this gets
cumbersome when the only other parameter is often an address.
This adds the typedef run_on_cpu_func for helper functions which has an
explicit CPUState * passed as the first parameter. All the users of
run_on_cpu and async_run_on_cpu have had their helpers updated to use
CPUState where available.
Backports commit e0eeb4a21a3ca4b296220ce4449d8acef9de9049 from qemu
As discussed on the list [1], having a comment stating that this file
is "public domain" is arguably wrong and not legally binding. This patch
replaces that comment with a clear GPLv2+ license as proposed in [2].
[1] http://lists.nongnu.org/archive/html/qemu-devel/2016-09/msg06151.html
[2] http://lists.nongnu.org/archive/html/qemu-devel/2016-09/msg06217.html
Worth noting, compiler.h was originally created on 5c026320 by splitting
qemu-common.h. At the time, qemu-common.h was already GPLv2+.
Backports commit cc9d8a3b2c41c22fb09f90f3085e6036c199c3ca from qemu
This will ensure all checks for features[FEAT_KVM] in the code
will be correct in case the KVM CPUID leaf is completely
disabled.
Backports commit aec661de86894e914d2d82431d9cefa9a9a40213 from qemu
This will reuse the existing check/enforce logic in
x86_cpu_filter_features() to check the xsave component bits
against GET_SUPPORTED_CPUID.
Backports commit 96193c22ab39ea24f81e386ad7883260ff24f5fd from qemu
Instead of doing complex calculations and calling
kvm_arch_get_supported_cpuid() inside cpu_x86_cpuid(), calculate
the set of required XSAVE components earlier, at realize time.
Backports commit 2ca8a8becc2eeb5262e478ce502f5daa53f3d0bc from qemu
Move the xsave area size calculation from cpu_x86_cpuid() inside
its own function. While doing it, change it to use the XSAVE area
struct sizes for the initial size, instead of the magic 0x240
number.
Backports commit 1fda6198e4126af9988754c8824cfc9928649890 from qemu
Instead of assigning individual bits in a loop, just copy the
values from ena_mask.
Backports commit 8057c621b1b17cbcb35fe67d1a09ada9055873a9 from qemu
Instead of checking both env->features and ena_mask at two
different places in the CPUID code, initialize ena_mask based on
the features that are enabled for the CPU, and then clear
unsupported bits based on kvm_arch_get_supported_cpuid().
The results should be exactly the same, but it will make it
easier to move the mask calculation elsewhare, and reuse
x86_cpu_filter_features() for the kvm_arch_get_supported_cpuid()
check.
Backports commit 4928cd6de6b4211a79f98c8dc39115be1e815c2b from qemu
The code that calculates the set of supported XSAVE components on
CPUID looks at ext_save_areas to find out which components should
be enabled. However, if there are zeroed entries in the
ext_save_areas array, the
((env->features[esa->feature] & esa->bits) == esa->bits)
check will always succeed and QEMU will unconditionally try to
enable the component.
Luckily this never caused any problems because the only missing
entry in ext_save_areas is the PT State component (bit 8), and
KVM currently doesn't support it (so it was cleared on ena_mask).
But the code was still incorrect and would break if KVM starts
returning CPUID[EAX=0xD,ECX=0].EAX[bit 8] as supported on
GET_SUPPORTED_CPUID.
Fix the problem by changing the code to not enable a XSAVE
component if ExtSaveArea::bits is zero.
Backports commit 9646f4927faf68e8690588c2fd6dc9834c440b58 from qemu
It makes it easier to guarantee the arrays are the right size,
and to find information when looking at the code.
Backports commit 2d5312da566e4424a807d078da05f92ee7be3eec from qemu
SVM needs CPUID[0x8000000A] to be available. So if SVM is enabled
in a CPU model or explicitly in the command-line, adjust CPUID
xlevel to expose the CPUID[0x8000000A] leaf.
Backports commit 0c3d7c0051576d220e6da0a8ac08f2d8482e2f0b from qemu
Instead of requiring users and management software to be aware of
required CPUID level/xlevel/xlevel2 values for each feature,
automatically increase those values when features need them.
This was already done for CPUID[7].EBX, and is now made generic
for all CPUID feature flags. Unit test included, to make sure we
don't break ABI on older machine-types and don't mess with the
CPUID level values if they are explicitly set by the user.
Backports commit c39c0edf9bb3b968ba95484465a50c7b19f4aa3a from qemu
Instead of using cpuid_level, use an empty struct as a marker
(like we already did with {start,end}_init_save). This will avoid
accidentaly resetting the wrong fields if we change the field
ordering on CPUX86State.
Backports commit 5e992a8e337e710ea2d02f35668ac55a80e15f99 from qemu
No CPU model in builtin_x86_defs has xlevel2 set, so it is always
zero. Delete the field.
Note that this is not an user-visible change. It doesn't remove
the ability to set xlevel2 on the command-line, it just removes
an unused field in builtin_x86_defs.
Backports commit 0456441b5eb6694a561ad5bb8dad52483e6a08d0 from qemu
Define a new CPU definition supporting 24KEc cores, similar to
the existing 24Kc, but with added support for DSP instructions
and MIPS16e (and without FPU).
Backports commit e9deaad8a58c899dc32e9fdeff9e533070e79dca from qemu
Add the "cortex-a7" CPU with features and registers matching the Cortex-A7
MPCore Technical Reference Manual and the Cortex-A7 Floating-Point Unit
Technical Reference Manual. The A7 is very similar to the A15.
Backports commit dcf578ed8cec89543158b103940e854ebd21a8cf from qemu
This avoids a double hand-full of magic numbers in the
xsave and xrstor helper functions.
Backports commit 3f32bd21df655e62eb271182a5c63280d631c7b3 from qemu
TARGET_PAGE_MASK, as defined, has type "int". We need to extend
that to the proper target width before oring in an "unsigned".
Backports commit ebb90a005da67147245cd38fb04a965a87a961b7 from qemu
This commit optimizes fence instructions. Two optimizations are
currently implemented: (1) unnecessary duplicate fence instructions,
and (2) merging weaker fences into a stronger fence.
[rth: Merge tcg_optimize_mb back into tcg_optimize, so that we only
loop over the opcode stream once. Merge "unrelated" weaker barriers
into one stronger barrier.]
Backports commit 34f939218ce78163171addd63750e1e0300376ab from qemu
Generate a 'lock orl $0,0(%esp)' instruction for ordering instead of
mfence which has similar ordering semantics.
Backports commit a7d00d4effb58889ac6df64f98ac50c9d1594149 from qemu
This commit introduces the TCGOpcode for memory barrier instruction.
This opcode takes an argument which is the type of memory barrier
which should be generated.
Backports commit f65e19bc2c9e8358e634d309606144ac2a3c2936 from qemu
The return address argument to the softmmu template helpers was
confused. In the legacy case, we wanted to indicate that there
is no return address, and so passed in NULL. However, we then
immediately subtracted GETPC_ADJ from NULL, resulting in a non-zero
value, indicating the presence of an (invalid) return address.
Push the GETPC_ADJ subtraction down to the only point it's required:
immediately before use within cpu_restore_state_from_tb, after all
NULL pointer checks have been completed.
This makes GETPC and GETRA identical. Remove GETRA as the lesser
used macro, replacing all uses with GETPC.
Backports commit 01ecaf438b1eb46abe23392c8ce5b7628b0c8cf5 from qemu
Previously we allowed fully unaligned operations, but not operations
that are aligned but with less alignment than the operation size.
In addition, arm32, ia64, mips, and sparc had been omitted from the
previous overalignment patch, which would have led to that alignment
being enforced.
Backports commit 85aa80813dd9f5c1f581c743e45678a3bee220f8 from qemu
In user-mode emulation env->idt.base memory is
allocated in linux-user/main.c with
size 8*512 = 4096 (for 64-bit).
When fake interrupt EXCP_SYSCALL is thrown
do_interrupt_user checks destination privilege level
for this fake exception, and tries to read 4 bytes
at address base + (256 * 2^4)=4096, that causes
segfault.
Privlege level was checked only for int's, so lets
read dpl from memory only for this case.
Backports commit 885b7c44e4f8b7a012a92770a0dba8b238662caa from qemu
Make sure reset zeroes TSC_AUX, XCR0, PKRU. Move XSTATE_BV from the
"vmstate only" section to the "KVM only" section.
Backports commit 7616f1c2da1c0f336a474a56ad6d32e15ccd666e from qemu
Unused function declarations were found using a simple gcc plugin and
manually verified by grepping the sources.
Backports commit d4b84d564ee3eb7a58e4585d671fb3c220b6c3b9 from qemu
All operations that take a floatx80 as an operand need to have their
inputs checked for malformed encodings. In all of these cases, use the
function floatx80_invalid_encoding to perform the check. If an invalid
operand is found, raise an invalid operation exception, and then return
either NaN (for fp-typed results) or the integer indefinite value (the
minimum representable signed integer value, for int-typed results).
For the non-quiet comparison operations, this touches adjacent code in
order to pass style checks.
Backports cast correction portion of commit d1eb8f2acba579830cf3798c3c15ce51be852c56m from qemu
Use the __atomic_*_n() primitives which take the value as argument. It
is not necessary to store the value locally before calling the
primitive, hence saving us a stack store and load.
Backports commit 89943de17c4e276f2c47f05b4604e8816a6a636c from qemu
For module build, .mo objects are passed to LINK and consumed in
process-archive-undefs. The reason behind that is documented in the
comment above process-archive-undefs.
Similarly, extract-libs should be called with .mo filtered out too.
Otherwise, the .mo-libs are added to the link command incorrectly,
spoiling the purpose of modularization.
Currently we don't have any .mo-libs usage, but it will be used soon
when we modularize more multi-source objects, like sdl and gtk.
Backports commit 5b1b6dbd94e2e2e98920f886cb32fcf4a1520b50 from qemu
In fact, this function does not exactly perform a lookup by physical
address as it is descibed for comment on get_page_addr_code(). Thus
it may be a bit confusing to have "physical" in it's name. So rename it
to tb_htable_lookup() to better reflect its actual functionality.
Backports commit b34de45fc40d01c14b31d3a682e284180a2ed8c5 from qemu
These functions are not too big and can be merged together. This makes
locking scheme more clear and easier to follow.
Backports commit bd2710d5da06ad7706d4864f65b3f0c9f7cb4d7f from qemu