This allows us to use this detection within the TCG_TARGET_HAS_*
macros, instead of requiring a function call into tcg-target.inc.c.
Backports commit 40b2ccb156534f5d5f1d110a6ce008d87ee10af1 from qemu
While we don't require a new opcode, it is handy to have an expander
that knows the first source is zero.
Backports commit 07cc68d52852bf47dea7c402b46ddd28248d4212 from qemu
Adds tcg_gen_extract_* and tcg_gen_sextract_* for extraction of
fixed position bitfields, much like we already have for deposit.
Backports commit 7ec8bab3deae643b1ce579c2d65a244f30708330 from qemu
This patch introduces a helper to query the iotlb entry for a
possible iova. This will be used by later device IOTLB API to enable
the capability for a dataplane (e.g vhost) to query the IOTLB.
Backports commit 052c8fa9983f553fdfa0d61034774070dd639c2b from qemu
gcc 5.3.0 diagnoses
translate-all.c: In function ‘alloc_code_gen_buffer’:
translate-all.c:756:17: error: switch condition has boolean value
switch (buf2 != MAP_FAILED) {
^
Backports commit f68808c7494b38764e1895a9852b994638b86536 from qemu
tcg_out_ldst: using a generic ALIAS_PADD to avoid ifdefs
tcg_out_ld: generates LD or LW
tcg_out_st: generates SD or SW
Backports commit 32b69707df3365aadaad1d058044a7704397ec62 from qemu
tcg_out_mov: using OPC_OR as most mips assemblers do;
tcg_out_movi: extended to 64-bit immediate.
Backports commit 2294d05dab503d11664e73712c7f250fd0bf9e3b from qemu
Without the mips32r2 instructions to perform swapping, bswap is quite large,
dominating the size of each reverse-endian qemu_ld/qemu_st operation.
Create two subroutines in the prologue block. The subroutines require extra
reserved registers (TCG_TMP[2, 3]). Using these within qemu_ld means that
we need not place additional restrictions on the qemu_ld outputs.
Backports commit 7f54eaa3b78d71cb57e45a719980f9b5ff06d21c from qemu
Bulk patch adding 64-bit opcodes into tcg_out_op. Note that
mips64 is as yet neither complete nor enabled.
Backports commit 0119b1927d531f3fac22b9b4da01dafc23644973 from qemu
Since the mips manual tables are in octal, reorg all of the opcodes
into that format for clarity. Note that the 64-bit opcodes are as
yet unused.
Backports commit 57a701fc2b34902310d4dbd1411088055616938a from qemu
Without the mips32r2 instructions to perform swapping, bswap is quite large,
dominating the size of each reverse-endian qemu_ld/qemu_st operation.
Create a subroutine in the prologue block. The subroutine requires extra
reserved registers (TCG_TMP[2, 3]). Using these within qemu_ld means that
we need not place additional restrictions on the qemu_ld outputs.
Backports commit bb08afe9f0aee1a3f5c23508e2511b882ca31e1b from qemu
Also manage word and byte operands and fix the computation of
overflow in the case of M68000 arithmetic shifts.
Backports commit 367790cce8e14131426f5190dfd7d1bdbf656e4d from qemu
Report this properly via exception and, importantly, allow
the disassembler the chance to tell us what insn is not handled.
Backports commit 72d2e4b6a437f11f97d3138f6b2ec177b78210c7 from qemu
680x0 movem can load/store words and long words and can use more
addressing modes. Coldfire can only use long words with (Ax) and
(d16,Ax) addressing modes.
Backports commit 7b542eb96d7d5d9266a9c0425f05d49c8e6df2f9 from qemu
Implement CAS using cmpxchg.
Implement CAS2 using helper and either cmpxchg when
the 32bit addresses are consecutive, or with
parallel_cpus+cpu_loop_exit_atomic() otherwise.
Backports commit 14f944063affbcc7bd6df42b060793dbfee8a822 from qemu
Update helper to set the throwing location in case of div-by-0.
Cleanup divX.w and add quad word variants of divX.l.
Backports commit 0ccb9c1d8128a020720d5c6abf99a470742a1b94 from qemu
Update helper to set the throwing location in case of div-by-0.
Cleanup divX.w and add quad word variants of divX.l.
Backports commit 0ccb9c1d8128a020720d5c6abf99a470742a1b94 from qemu
Provide gen_lea_mode and gen_ea_mode, where the mode can be
specified manually, rather than taken from the instruction.
Backports commit f84aab269ddab8509b77408b886e9071bf5c48fb from qemu
ARM1176 CPUs have TrustZone support and can use the Vector Base
Address Register, but currently, qemu only adds VBAR support to ARMv7
CPUs. Fix this by adding a new feature ARM_FEATURE_VBAR which can used
for ARMv7 and ARM1176 CPUs.
The VBAR feature is always set for ARMv7 because some legacy boards
require it even if this is not architecturally correct.
Backports commit 91db4642f868cf2e591b62d31a19d35b02ea791e from qemu
We already log exception entry; add logging of the AArch64 exception
return path as well.
Backports commit c9b61d9aa1ad234b0961f8add023cdc999cda3da from qemu
The value of the MVFR1 (Media and VFP Feature Register 1) register for
the Cortex-A8 appears to be incorrect (according to the TRM, DDI0344K),
with the "full denormal arithmetic" and "propagation of NaN" fields
holding both 0 instead of both 1.
I had a go tracing the history of the use of this value, and it seems
it's always just been wrong in QEMU: maybe it was derived from early
documentation, or guessed based on the use of a "VFP Lite" implementation
in the Cortex-A8.
Depending on the startup/early-boot code in use, this can manifest as
failure to perform denormal arithmetic properly: in our case, selecting
a Cortex-A8 CPU when using QEMU as an instruction-set simulator for
bare-metal GCC testing caused tests using denormal arithmetic to
fail. Problems might be masked (or not occur) when using a full OS kernel
with suitable trap handlers (I'm not sure).
Backports commit 0f1944735b6bac810b067e8a7a5154744536fd59 from qemu
We can't use LOAD AND TEST for unsigned data and then expect to
extract the result with ADD LOGICAL WITH CARRY. Fall through to
using COMPARE LOGICAL IMMEDIATE instead.
Backports commit 65839b56b9a740e6b898b5d81afc160502bd2935 from qemu
The new paging more is extension of IA32e mode with more additional page
table level.
It brings support of 57-bit vitrual address space (128PB) and 52-bit
physical address space (4PB).
The structure of new page table level is identical to pml4.
The feature is enumerated with CPUID.(EAX=07H, ECX=0):ECX[bit 16].
CR4.LA57[bit 12] need to be set when pageing enables to activate 5-level
paging mode.
Backports commit 6c7c3c21f95dd9af8a0691c0dd29b07247984122 from qemu
The syscall and sysret instructions behave a bit differently:
TF is checked after the instruction completes.
This allows the o/s to disable #DB at a syscall by adding TF to FMASK.
And then when the sysret is executed the #DB is taken "as if" the
syscall insn just completed.
Backports commit c52ab08aee6f7d4717fc6b517174043126bd302f from qemu
Device models often have to perform multiple access to a single
memory region that is known in advance, but would to use "DMA-style"
functions instead of address_space_map/unmap. This can happen
for example when the data has to undergo endianness conversion.
Introduce a new data structure to cache the result of
address_space_translate without forcing usage of a host address
like address_space_map does.
Backports commit 1f4e496e1fc2eb6c8bf377a0f9695930c380bfd3 from qemu
This extracts the common part of address_space_map and
address_space_cache_init into a new function.
Backports commit 715c31ec8e12107f47ac74b464c97e813c76f898 from qemu
Templatize the address_space_* and *_phys functions, so that we can add
similar functions in the next patch that work with a lightweight,
cache-like version of address_space_map/unmap.
Backports commit 0ce265ffef87f19f4dd1ff0663e09a63d66ae408 from qemu
Since CPUARMState.vfp.regs is not 16 byte aligned, the ^ 8 fixup used
for a big-endian host doesn't do what's intended. Fix this by adding
in the vfp.regs offset after computing the inter-register offset.
Backports commit d437262fa8edd0d9fbe038a515dda3dbf7c5bb54 from qemu
We add s->be_data within do_vec_ld/st. Adding it here means that
we have the wrong bits set in SIZE for a big-endian host, leading
to g_assert_not_reached in write_vec_element and read_vec_element.
Backports commit 74b13f92c2428abae41a61c46a5cf47545da5fcb from qemu
Commit 2afbdf8 ("target-i386: exception handling for memory helpers",
2015-09-15) changed tlb_fill's cpu_restore_state+raise_exception_err
to raise_exception_err_ra. After this change, the cpu_restore_state
and raise_exception_err's cpu_loop_exit are merged into
raise_exception_err_ra's cpu_loop_exit_restore.
This actually fixed some bugs, but when SVM is enabled there is a
second path from raise_exception_err_ra to cpu_loop_exit. This is
the VMEXIT path, and now cpu_vmexit is called without a
cpu_restore_state before.
The fix is to pass the retaddr to cpu_vmexit (via
cpu_svm_check_intercept_param). All helpers can now use GETPC() to pass
the correct retaddr, too.
Backports commit 823fb688ebc52a7d79c1308acb28c92b56820167 from qemu
When icount is active, tb_add_jump is surprisingly called with an
out of bounds basic block index. I have no idea how that can work,
but it does not seem like a good idea. Clear *last_tb for all
TB_EXIT_ICOUNT_EXPIRED cases, even when all you have to do is
refill icount_extra.
Backports commit d8dea6fbcbed177ca5d23ab77b3834a9437f0e88 from qemu
There were some patterns, like 0x0000_ffff_ffff_00ff, for which we
would select to begin a multi-insn sequence with MOVN, but would
fail to set the 0x0000 lane back from 0xffff.
Backports commit 50b468d42107a2c646b1c566ed17d9ec362c51c4 from qemu
When al == xzr, we cannot use addi/subi because that encodes xsp.
Force a zero into the temp register for that (rare) case.
Backports commit 028fbea47713f909d6ea761a457779a82b276247 from qemu
rcu_read_unlock was not called if the address_space_access_valid result is
negative.
This caused (at least) a problem when qemu on PPC/E500+TAP failed to terminate
properly and instead got stuck in a deadlock.
Backports commit 662a97d74f9b34cafe9aeb6d96620a97d768a1fa from qemu
