The PMUv3 driver of linux kernel (in arch/arm64/kernel/perf_event.c)
relies on the PMUVER field of id_aa64dfr0_el1 to decide if PMU support
is present or not. This patch clears the PMUVER field under TCG mode
when vPMU=off. Without it, PMUv3 will init insider guest VMs even
with vPMU=off. This patch also removes a redundant line inside the
if-statement.
Backports commit 2b3ffa929249b15a75d8bde3e8e57a744f52aff0 from qemu
When identifying the DFSR format for an alignment fault, use
the mmu index that we are passed, rather than calling cpu_mmu_index()
to get the mmu index for the current CPU state. This doesn't actually
make any difference since the only cases where the current MMU index
differs from the index used for the load are the "unprivileged
load/store" instructions, and in that case the mmu index may
differ but the translation regime is the same (apart from the
"use from Hyp mode" case which is UNPREDICTABLE).
However it's the more logical thing to do.
Backports commit e517d95b63427fae9f03958dbc005c36b4ebf2cf from qemu
This patch converts the old "is_write" bool into IOMMUAccessFlags. The
difference is that "is_write" can only express either read/write, but
sometimes what we really want is "none" here (neither read nor write).
Replay is an good example - during replay, we should not check any RW
permission bits since thats not an actual IO at all.
Backports commit bf55b7afce53718ef96f4e6616da62c0ccac37dd from qemu
This function is an abstraction helper for address_space_translate() and
address_space_get_iotlb_entry(). It does the lookup of address into
memory region section, then does proper IOMMU translation if necessary.
Refactor the two existing functions to use it.
This fixes vhost when IOMMU is disabled by guest.
Backports commit a764040cc831cfe5b8bf1c80e8341b9bf2de3ce8 from qemu
In case where the conditional write is the first write to the page,
TLB_NOTDIRTY will be set and stop_the_world is triggered. Handle this as
a special case and set the dirty bit. After that fall through to the
actual atomic instruction below.
Backports commit 7f9af1abdcc69fd1d3d8d2be68464329600616d6 from qemu
Users of tcg_gen_atomic_cmpxchg and do_atomic_op rightfully utilize
the output. Even though this code is dead, it gets translated, and
without the initialization we encounter a tcg_error.
Backports commit 79b1af906245558c30e0a5faf26cb52b63f83cce from qemu
We already require gcc 4.1 or newer (for the atomic
support), so the fallback codepaths for older gcc
versions than that are now dead code and we can
just delete them.
NB: clang reports itself as gcc 4.2 (regardless of
clang version), so clang won't be using the fallbacks
either.
Backports commit fa54abb8c298f892639ffc4bc2f61448ac3be4a1 from qemu
Now that we've rewritten M-profile exception return so that the magic
PC values are not visible to other parts of QEMU, we can delete the
special casing of them elsewhere.
Backports commit f4e8e4edda875cab9df91dc4ae9767f7cb1f50aa from qemu
On M profile, return from exceptions happen when code in Handler mode
executes one of the following function call return instructions:
* POP or LDM which loads the PC
* LDR to PC
* BX register
and the new PC value is 0xFFxxxxxx.
QEMU tries to implement this by not treating the instruction
specially but then catching the attempt to execute from the magic
address value. This is not ideal, because:
* there are guest visible differences from the architecturally
specified behaviour (for instance jumping to 0xFFxxxxxx via a
different instruction should not cause an exception return but it
will in the QEMU implementation)
* we have to account for it in various places (like refusing to take
an interrupt if the PC is at a magic value, and making sure that
the MPU doesn't deny execution at the magic value addresses)
Drop these hacks, and instead implement exception return the way the
architecture specifies -- by having the relevant instructions check
for the magic value and raise the 'do an exception return' QEMU
internal exception immediately.
The effect on the generated code is minor:
bx lr, old code (and new code for Thread mode):
TCG:
mov_i32 tmp5,r14
movi_i32 tmp6,$0xfffffffffffffffe
and_i32 pc,tmp5,tmp6
movi_i32 tmp6,$0x1
and_i32 tmp5,tmp5,tmp6
st_i32 tmp5,env,$0x218
exit_tb $0x0
set_label $L0
exit_tb $0x7f2aabd61993
x86_64 generated code:
0x7f2aabe87019: mov %ebx,%ebp
0x7f2aabe8701b: and $0xfffffffffffffffe,%ebp
0x7f2aabe8701e: mov %ebp,0x3c(%r14)
0x7f2aabe87022: and $0x1,%ebx
0x7f2aabe87025: mov %ebx,0x218(%r14)
0x7f2aabe8702c: xor %eax,%eax
0x7f2aabe8702e: jmpq 0x7f2aabe7c016
bx lr, new code when in Handler mode:
TCG:
mov_i32 tmp5,r14
movi_i32 tmp6,$0xfffffffffffffffe
and_i32 pc,tmp5,tmp6
movi_i32 tmp6,$0x1
and_i32 tmp5,tmp5,tmp6
st_i32 tmp5,env,$0x218
movi_i32 tmp5,$0xffffffffff000000
brcond_i32 pc,tmp5,geu,$L1
exit_tb $0x0
set_label $L1
movi_i32 tmp5,$0x8
call exception_internal,$0x0,$0,env,tmp5
x86_64 generated code:
0x7fe8fa1264e3: mov %ebp,%ebx
0x7fe8fa1264e5: and $0xfffffffffffffffe,%ebx
0x7fe8fa1264e8: mov %ebx,0x3c(%r14)
0x7fe8fa1264ec: and $0x1,%ebp
0x7fe8fa1264ef: mov %ebp,0x218(%r14)
0x7fe8fa1264f6: cmp $0xff000000,%ebx
0x7fe8fa1264fc: jae 0x7fe8fa126509
0x7fe8fa126502: xor %eax,%eax
0x7fe8fa126504: jmpq 0x7fe8fa122016
0x7fe8fa126509: mov %r14,%rdi
0x7fe8fa12650c: mov $0x8,%esi
0x7fe8fa126511: mov $0x56095dbeccf5,%r10
0x7fe8fa12651b: callq *%r10
which is a difference of one cmp/branch-not-taken. This will
be lost in the noise of having to exit generated code and
look up the next TB anyway.
Backports commit 3bb8a96f5348913ee130169504f3642f501b113e from qemu
For M profile exception-return handling we'd like to generate different
code for some instructions depending on whether we are in Handler
mode or Thread mode. This isn't the same as "are we privileged
or user", so we need an extra bit in the TB flags to distinguish.
Backports commit 064c379c99b835bdcc478d21a3849507ea07d53a from qemu
Move the code to generate the "condition failed" instruction
codepath out of the if (singlestepping) {} else {}. This
will allow adding support for handling a new is_jmp type
which can't be neatly split into "singlestepping case"
versus "not singlestepping case".
Backports commit f021b2c4627890d82fbcc300db3bd782b37b7f8a from qemu
arm: Abstract out "are we singlestepping" test to utility function
We now test for "are we singlestepping" in several places and
it's not a trivial check because we need to care about both
architectural singlestep and QEMU gdbstub singlestep. We're
also about to add another place that needs to make this check,
so pull the condition out into a function.
Backports commit b636649f5a2e108413dd171edaf320f781f57942 from qemu
Move the utility routines gen_set_condexec() and gen_set_pc_im()
up in the file, as we will want to use them from a function
placed earlier in the file than their current location.
Backports commit 4d5e8c969a74c86124fc2284ea603cc6dd3c5dfa from qemu
We currently have two places that do:
if (dc->ss_active) {
gen_step_complete_exception(dc);
} else {
gen_exception_internal(EXCP_DEBUG);
}
Factor this out into its own function, as we're about to add
a third place that needs the same logic.
Backports commit 5425415ebba5fa20558e1ef25e1997a6f5ea4c7c from qemu
In Thumb mode, the only instructions which can cause an interworking
branch by writing the PC are BLX, BX, BXJ, LDR, POP and LDM. Unlike
ARM mode, data processing instructions which target the PC do not
cause interworking branches.
When we added support for doing interworking branches on writes to
PC from data processing instructions in commit 21aeb3430ce7ba, we
accidentally changed a Thumb instruction to have interworking
branch behaviour for writes to PC. (MOV, MOVS register-shifted
register, encoding T2; this is the standard encoding for
LSL/LSR/ASR/ROR (register).)
For this encoding, behaviour with Rd == R15 is specified as
UNPREDICTABLE, so allowing an interworking branch is within
spec, but it's confusing and differs from our handling of this
class of UNPREDICTABLE for other Thumb ALU operations. Make
it perform a simple (non-interworking) branch like the others.
Backports commit bedb8a6b09c1754c3b9f155750c62dc087706698 from qemu
For M-profile CPUs, the BXJ instruction does not exist at all, and
the encoding should always UNDEF. We were accidentally implementing
it to behave like A-profile BXJ; correct the error.
Backports commit 9d7c59c84d4530d05e8702b1c3a31e6da00a397e from qemu
In tlb_fill() we construct a syndrome register value from a
fault status register value which is filled in by arm_tlb_fill().
arm_tlb_fill() returns FSR values which might be in the format
used with short-format page descriptors, or the format used
with long-format (LPAE) descriptors. The syndrome register
always uses LPAE-format FSR status codes.
It isn't actually possible to end up delivering a syndrome
register value to the guest for a fault which is reported
with a short-format FSR (that kind of stage 1 fault will only
happen for an AArch32 translation regime which doesn't have
a syndrome register, and can never be redirected to an AArch64
or Hyp exception level). Add an assertion which checks this,
and adjust the code so that we construct a syndrome with
an invalid status code, rather than allowing set bits in
the FSR input to randomly corrupt other fields in the syndrome.
Backports commit 65ed2ed90d9d81fd4b639029be850ea5651f919f from qemu
The excnames[] array is defined in internals.h because we used
to use it from two different source files for handling logging
of AArch32 and AArch64 exception entry. Refactoring means that
it's now used only in arm_log_exception() in helper.c, so move
the array into that function.
Backports commit 2c4a7cc5afb1bfc1728a39abd951ddd7714c476e from qemu
Recent changes have added new EXCP_ values to ARM but forgot
to update the excnames[] array which is used to provide
human-readable strings when printing information about the
exception for debug logging. Add the missing entries, and
add a comment to the list of #defines to help avoid the mistake
being repeated in future.
Backports commit 32b81e620ea562d56ab2733421b5da1082b237a2 from qemu
For "ldp x0, x1, [x0]", if the second load is on a second page and
the second page is unmapped, the exception would be raised with x0
already modified. This means the instruction couldn't be restarted.
Backports commit 2d1bbf51c2cb948da4b6fd5f91cf3ecc80b28156 from qemu
MemoryRegionCache did not know about virtio support for IOMMUs (because the
two features were developed at the same time). Revert MemoryRegionCache
to "normal" address_space_* operations for 2.9, as it is simpler than
undoing the virtio patches.
Backports commit 90c4fe5fc517a045e7a7cf2f23472e114042ca29 from qemu
The C store helper functions take the address argument as a
target_ulong type; if this is 32 bit but the host is 64 bit
then the SPARC calling convention requires that the caller
must zero extend the value. We weren't doing this, which
meant we could pass values to the caller with high bits set
and QEMU would crash if it was compiled with optimizations.
In particular, the i386 BIOS would not start.
Backports commit 5c32be5baf41aec4f4675d2bf24f9948756abf3c from qemu
The C store helper functions take the data argument as a uint8_t,
uint16_t, etc depending on the store size. The SPARC calling
convention requires that data types smaller than the register
size must be extended by the caller. We weren't doing this,
which meant that if QEMU was compiled with optimizations enabled
we could end up storing incorrect values to guest memory.
(In particular the i386 guest BIOS would crash on startup.)
Add code to the trampolines that call the store helpers to
do the zero extension as required.
Backports commit 709a340d679d95a0c6cbb9b5f654498f04345b50 from qemu
The existing code for "host" and "max" CPU models overrides every
single feature in the CPU object at realize time, even the ones
that were explicitly enabled or disabled by the user using
"feat=on" or "feat=off", while features set using +feat/-feat are
kept.
This means "-cpu host,+invtsc" works as expected, while
"-cpu host,invtsc=on" doesn't.
This was a known bug, already documented in a comment inside
x86_cpu_expand_features(). What makes this bug worse now is that
libvirt 3.0.0 and newer now use "feat=on|off" instead of
+feat/-feat when it detects a QEMU version that supports it (see
libvirt commit d47db7b16dd5422c7e487c8c8ee5b181a2f9cd66).
Change the feature property getter/setter to set a
env->user_features field, to keep track of features that were
explicitly changed using QOM properties. Then make the
max_features code not override user features when handling "-cpu
host" and "-cpu max".
This will also allow us to remove the plus_features/minus_features
hack in the future, but I plan to do that after 2.9.0 is
released.
Backports commit d4a606b38b5d4b3689b86cc1575908e82179ecfb from qemu
The Cygwin target is really compiling for native Win32 with -mno-cygwin.
Except, GCC 4.7.0 has finally removed the long deprecated -mno-cygwin
option, and that happened about five years ago.
Let it rest in peace.
Backports commit c8645752ce31cc044ecc5f969a986fdcb6aab590 from qemu
It is unnecessary to test R6 from delay/forbidden slot check
in gen_msa_branch().
https://bugs.launchpad.net/qemu/+bug/1663287
Backports commit 075a1fe788d36b271ec25507466c30b9a90b5d54 from qemu
this fixes many warnings like:
target/mips/translate.c:6253:13: warning: Value stored to 'rn' is never read
rn = "invalid sel";
^ ~~~~~~~~~~~~~
Backports commit 3570d7f6672836140f0a1ec9bf95dd5ea50a2aaa from qemu
static code analyzer complain:
target/mips/helper.c:453:5: warning: Function call argument is an uninitialized value
qemu_log_mask(CPU_LOG_MMU,
^~~~~~~~~~~~~~~~~~~~~~~~~~
'physical' and 'prot' are uninitialized if 'ret' is not TLBRET_MATCH.
Backports commit def74c0cf05722b2e502d4b4f1219966c5b0cbd3 from qemu
Our implementation of writes to the APSR for M-profile via the MSR
instruction was badly broken.
First and worst, we had the sense wrong on the test of bit 2 of the
SYSm field -- this is supposed to request an APSR write if bit 2 is 0
but we were doing it if bit 2 was 1. This bug was introduced in
commit 58117c9bb429cd, so hasn't been in a QEMU release.
Secondly, the choice of exactly which parts of APSR should be written
is defined by bits in the 'mask' field. We were not passing these
through from instruction decode, making it impossible to check them
in the helper.
Pass the mask bits through from the instruction decode to the helper
function and process them appropriately; fix the wrong sense of the
SYSm bit 2 check.
Invalid mask values and invalid combinations of mask and register
number are UNPREDICTABLE; we choose to treat them as if the mask
values were valid.
Backports commit b28b3377d7e9ba35611d454d5a63ef50cab1f8c5 from qemu
For M profile (unlike A profile) the reset value of R14 is specified
as 0xffffffff. (The rationale is that this is an illegal exception
return value, so if guest code tries to return to it it will result
in a helpful exception.)
Registers r0 to r12 and the flags are architecturally UNKNOWN on
reset, so we leave those at zero.
Backports commit 056f43df9168413f304500b69c33158d66efb7cf from qemu
For M profile CPUs, FAULTMASK should be 0 on reset, like PRIMASK.
QEMU stores FAULTMASK in the PSTATE F bit, so (as with PRIMASK in the
I bit) we have to clear these to undo the A profile default of 1.
Update the comment accordingly and move it so that it's closer to the
code it's referring to.
Backports commit dc7abe4d65ad39390b2db120f5ad18f8f6576f8b from qemu
For v7M attempts to access a nonexistent coprocessor are reported
differently from plain undefined instructions (as UsageFaults of type
NOCP rather than type UNDEFINSTR). Split them out into a new
EXCP_NOCP so we can report the FSR value correctly.
Backports commit 7517748e3f71a3099e57915fba95c4c308e6d842 from qemu
For v7M attempts to access a nonexistent coprocessor are reported
differently from plain undefined instructions (as UsageFaults of type
NOCP rather than type UNDEFINSTR). Split them out into a new
EXCP_NOCP so we can report the FSR value correctly.
Backports commit 7517748e3f71a3099e57915fba95c4c308e6d842 from qemu
When we take an exception for an undefined instruction, set the
appropriate CFSR bit.
Backports commit 81dd9648c69bb89afdd6f4bb3ed6f3efdac96524 from qemu
The CCR.STACKALIGN bit controls whether the CPU is supposed to force
8-alignment of the stack pointer on entry to the exception handler.
Backports commit dc858c6633a9af8b80c1509cf6f825e4390d3ad1 from qemu
Add the structure fields, VMState fields, reset code and macros for
the v7M system control registers CCR, CFSR, HFSR, DFSR, MMFAR and
BFAR.
Backports commit 2c4da50d9477fb830d778bb5d6a11215aa359b44 from qemu
Give an explicit error and abort when a load
from the vector table fails. Architecturally this
should HardFault (which will then immediately
fail to load the HardFault vector and go into Lockup).
Since we don't model Lockup, just report this guest
error via cpu_abort(). This is more helpful than the
previous behaviour of reading a zero, which is the
address of the reset stack pointer and not a sensible
location to jump to.
Backports commit 1b9ea408fca1ce8caae67b792355b023c69c5ac5 from qemu
For v7m we need to catch attempts to execute from special
addresses at 0xfffffff0 and above. Previously we did this
with the aid of a hacky special purpose lump of memory
in the address space and a check in translate.c for whether
we were translating code at those addresses.
We can implement this more cleanly using a CPU
unassigned access handler which throws the exception
if the unassigned access is for one of the special addresses.
Backports commit 542b3478a00cb7ef51c259255b3ab1e2a7daada2 from qemu
The MRS and MSR instruction handling has a number of flaws:
* unprivileged accesses should only be able to read
CONTROL and the xPSR subfields, and only write APSR
(others RAZ/WI)
* privileged access should not be able to write xPSR
subfields other than APSR
* accesses to unimplemented registers should log as
guest errors, not abort QEMU
Backports commit 58117c9bb429cd9552d998687aa99088eb1d8528 from qemu
The v7m CONTROL register bit 1 is SPSEL, which indicates
the stack being used. We were storing this information
not in v7m.control but in the separate v7m.other_sp
structure field. Unfortunately, the code handling reads
of the CONTROL register didn't take account of this, and
so if SPSEL was updated by an exception entry or exit then
a subsequent guest read of CONTROL would get the wrong value.
Using a separate structure field doesn't really gain us
anything in efficiency, so drop this unnecessary complexity
in favour of simply storing all the bits in v7m.control.
This is a migration compatibility break for M profile
CPUs only.
Backports commit abc24d86cc0364f402e438fae3acb14289b40734 from qemu
The MRS instruction requires that bits [19..16] are all 1s, and for
A/R profile also that bits [7..0] are all 0s. At this point in the
decode tree we have checked all of the rest of the instruction but
were allowing these to be any value. If these bits are not set then
the result is architecturally UNPREDICTABLE, but choosing to UNDEF is
more helpful to the user and avoids unexpected odd behaviour if the
encodings are used for some purpose in future architecture versions.
Backports commit 3d54026fb06d1aea7ebb4e9825970b06bebcacac from qemu
M profile doesn't have the MSR(banked) and MRS(banked) instructions
and uses the encodings for different kinds of M-profile MRS/MSR.
Guard the relevant bits of the decode logic to make sure we don't
accidentally fall into them by accident on M-profile.
(The bit being checked for this (bit 5) is part of the SYSm field on
M-profile, but since no currently allocated system registers have
encodings with bit 5 of SYSm set, this hasn't been a problem in
practice.)
Backports commit 43ac65742319ef5ac4461daf43316b189cd21e89 from qemu
M profile doesn't have the HVC or SMC encodings, so make them always
UNDEF rather than generating calls to helper functions that assume
A/R profile.
Backports commit 001b3cab51ebfcb13e8dd03ea25bfa3bd0c517a3 from qemu
The 'name' parameter to memory_region_init_* had been marked as debug
only, however vmstate_region_ram uses it as a parameter to
qemu_ram_set_idstr to set RAMBlock names and these form part of the
migration stream.
Backports commit e8f5fe2de125a0bfbefbaa6a69af81f4817cb7a0 from qemu
