The TCG code is quite performance sensitive, but at the same time can
also be quite tricky. That is why asserts that can be enabled with the
--enable-debug-tcg configure option.
This used to work the following way:
| #include "config.h"
|
| ...
|
| #if !defined(CONFIG_DEBUG_TCG) && !defined(NDEBUG)
| /* define it to suppress various consistency checks (faster) */
| #define NDEBUG
| #endif
|
| ...
|
| #include <assert.h>
Since commit 757e725b (tcg: Clean up includes) "config.h" as been
replaced by "qemu/osdep.h" which itself includes <assert.h>. As a
consequence the assertions are always enabled, even when using
--disable-debug-tcg, causing a performance regression, especially on
targets with many registers. For instance on qemu-system-ppc the
speed difference is about 15%.
tcg_debug_assert is controlled directly by CONFIG_DEBUG_TCG and already
uses in some places. This patch replaces all the calls to assert into
calss to tcg_debug_assert.
Backports commit eabb7b91b36b202b4dac2df2d59d698e3aff197a from qemu
Accoding the chapter 7.6 Trap Processing of the SPARC Architecture Manual v9,
the Trap Based Address Register is not modified as a trap is taken.
This fix allows booting FreeBSD-10.3-RELEASE-sparc64.
Backports commit de5f1077446ca455342db149737bdc395a7b9882 from qemu
ldstub [addr], reg incorrectly reads a signed byte from memory which causes
problems in the 32-bit Solaris mutex code. Here the byte value being read is
0xff which is incorrectly sign-extended to 0xffffffff before being written back
to the target register causing lock detection to behave incorrectly.
This fixes the intermittent hangs and MUTEX_HELD warnings issued to the
console when running 32-bit Solaris images under qemu-system-sparc.
With thanks to Joseph Dery for providing a condensed test image to consistently
reproduce the problem on demand, and Martin Husemann for allowing me access to
real hardware for comparison.
Backports commit 4553e10360a0713e31647220ed396942f9a6fca0 from qemu
Since 5e5f07e08 "TCG: Move translation block variables
to new context inside tcg_ctx: tb_ctx" on Feb 1 2013, compilation
of usermode + TB_DEBUG_CHECK has been broken. Fix it.
Backports commit 7e6bd36d61129feb7f667cb09ffec1b7b54b971c from qemu
Xiao Guangrong ran kvm-unit-tests on an actual machine with PKU and
found that it fails:
test pte.p pte.user pde.p pde.user pde.a pde.pse pkru.wd pkey=1 user write efer.nx cr4.pke: FAIL: error code 27 expected 7
Dump mapping: address: 0x123400000000
------L4: 2ebe007
------L3: 2ebf007
------L2: 8000000020000a5
(All failures are combinations of "pde.user pde.p pkru.wd pkey=1",
plus either "pde.pse" or "pte.p pte.user", plus one of "user cr0.wp",
"cr0.wp" or "user", plus unimportant bits such as accessed/dirty or
efer.nx).
So PFEC.PKEY is set even if the ordinary check failed (which it did
because pde.w is zero). Adjust QEMU to match behavior of silicon.
Backports commit 44d066a2f770ee9d61fd1c2a609bdf2a994dfdf7 from qemu
The MIPS TCG backend is the only one to have
tcg_target_reg_alloc_order[] elements of type TCGReg rather than int.
This resulted in commit 91478cefaaf2 ("tcg: Allocate indirect_base
temporaries in a different order") breaking the build on MIPS since the
type differed from indirect_reg_alloc_order[]:
tcg/tcg.c:1725:44: error: pointer type mismatch in conditional expression [-Werror]
order = rev ? indirect_reg_alloc_order : tcg_target_reg_alloc_order;
^
Make it an array of ints to fix the build and match other architectures.
Backports commit 2dc7553d0c0a3915c649e1a91b0f0be70b4674b3 from qemu
In order to simplify arguments of function, introduce a new struct
named X86CPUTopoInfo.
Backports commit ed256144cd6f0ca2ff59fc3fc8dca547506f433b from qemu
Move the architecture agnostic function prototypes for exec.c out of
cputlb.h to exec-all.h. This allows hiding of the arch specific
cputlb.h from exec.c which should be getting close to having no
architecture specifics. Prepares support for multi-arch, which will have
a minimal cpu.h that services exec.c but not cputlb.h.
Backports commit dfccc7602374c9fd3b083208b552d62daa244811 from qemu
To prepare for multi-arch, cputlb.c should only have awareness of one
single architecture. This means it should not have access to the full
CPU lists which may be heterogeneous. Instead, push the CPU_LOOP() up
to the one and only caller in exec.c.
Backports commit 9a13565d52bfd321934fb44ee004bbaf5f5913a8 from qemu
The last two arguments to these functions are the last and first bit to
check relative to the base. The code was using incorrectly the first
bit and the number of bits. Fix this in cpu_physical_memory_get_dirty
and cpu_physical_memory_all_dirty. This requires a few changes in the
iteration; change the code in cpu_physical_memory_set_dirty_range to
match.
Backports commit 88c73d16ad1b6c22a2ab082064d0d521f756296a from qemu
The __atomic primitives have been available since GCC 4.7 and provide
a richer interface for describing memory ordering requirements. As a
bonus by using the primitives instead of hand-rolled functions we can
use tools such as the ThreadSanitizer which need the use of well
defined APIs for its analysis.
If we have __ATOMIC defines we exclusively use the __atomic primitives
for all our atomic access. Otherwise we fall back to the mixture of
__sync and hand-rolled barrier cases.
Backports commit a0aa44b488b3601415d55041e4619aef5f3a4ba8 from qemu
__atomic_thread_fence does not include a compiler barrier; in the
C++11 memory model, fences take effect in combination with other
atomic operations. GCC implements this by making __atomic_load and
__atomic_store access memory as if the pointer was volatile, and
leaves no trace whatsoever of acquire and release fences in the
compiler's intermediate representation.
In QEMU, we want memory barriers to act on all memory, but at the same
time we would like to use __atomic_thread_fence for portability reasons.
Add compiler barriers manually around the __atomic_thread_fence.
Backports commit 3bbf572345c65813f86a8fc434ea1b23beb08e16 from qemu
Although accesses to ram_list.dirty_memory[] use atomics so multiple
threads can safely dirty the bitmap, the data structure is not fully
thread-safe yet.
This patch handles the RAM hotplug case where ram_list.dirty_memory[] is
grown. ram_list.dirty_memory[] is change from a regular bitmap to an
RCU array of pointers to fixed-size bitmap blocks. Threads can continue
accessing bitmap blocks while the array is being extended. See the
comments in the code for an in-depth explanation of struct
DirtyMemoryBlocks.
I have tested that live migration with virtio-blk dataplane works.
Backports commit 5b82b703b69acc67b78b98a5efc897a3912719eb from qemu
Move the ALIAS tag from VTCR_EL2 to VTCR so that we migrate the
64-bit version, as is usual. (This has no particular effect now
unless the guest wrote to the high RES0 bits of VTCR_EL2.)
Add a comment about why it's OK that we don't have the various
accessor functions that the EL1 TCR regdefs do.
Backports commit bf06c1123a427fefc2cf9cf8019578eafc19eb6f from qemu
The regdefs for the ESR_EL2 and ESR_EL3 system registers should not
be marked as ARM_CP_ALIAS, because these are the master copies; the
DFSR regdef in vmsa_pmsa_cp_reginfo[] is marked as an alias.
Remove the ALIAS tags so that these registers are correctly migrated.
Backports commit 094a7d0b9d10812d06be2c5c19288cee4603c693 from qemu
The regdef for SCTRL_EL3 was incorrectly marked as being an
ARM_CP_ALIAS, with the remark that this was because the 32-bit
definition would take care of reset and migration. However the
intention for banked registers as documented in the comment in
add_cpreg_to_hashtable() is:
* 2) If ARMv8 is enabled then we can count on a 64-bit version
* taking care of the secure bank. This requires that separate
* 32 and 64-bit definitions are provided.
and so it marks the 32-bit secure banked version as an alias.
This results in the sctlr_s/sctlr_el[3] field never being reset
or migrated for a 64-bit CPU with EL3 enabled.
Fix this by removing the ARM_CP_ALIAS annotation from SCTLR_EL3.
Since this means it now needs a real reset value, move the regdef
into the same place that we define the 32-bit SCTLR.
Backports commit e24fdd238a159d830a9a65dd9b08f80fba9b9e06 from qemu
MIPS Release 6 and MIPS SIMD Architecture make it mandatory to have IEEE
754-2008 FPU which is indicated by CP1 FIR.HAS2008, FCSR.ABS2008 and
FCSR.NAN2008 bits set to 1.
In QEMU we still keep these bits cleared as there is no 2008-NaN support.
However, this now causes problems preventing from running R6 Linux with
the v4.5 kernel. Kernel refuses to execute 2008-NaN ELFs on a CPU
whose FPU does not support 2008-NaN encoding:
(...)
VFS: Mounted root (ext4 filesystem) readonly on device 8:0.
devtmpfs: mounted
Freeing unused kernel memory: 256K (ffffffff806f0000 - ffffffff80730000)
request_module: runaway loop modprobe binfmt-464c
Starting init: /sbin/init exists but couldn't execute it (error -8)
request_module: runaway loop modprobe binfmt-464c
Starting init: /bin/sh exists but couldn't execute it (error -8)
Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
Therefore always indicate presence of 2008-NaN support in R6 as well as in
R5+MSA CPUs, even though this feature is not yet supported by MIPS in QEMU.
Backports commit ba5c79f26221c0fd7139c883a34a4e75d993f732 from qemu
There is no particular reason to keep these functions in the header.
Suggested by Paolo.
Backports commit 99affd1d5bd4e396ecda50e53dfbc5147fa1313d from qemu
The MAAR register is a read/write register included in Release 5
of the architecture that defines the accessibility attributes of
physical address regions. In particular, MAAR defines whether an
instruction fetch or data load can speculatively access a memory
region within the physical address bounds specified by MAAR.
As QEMU doesn't do speculative access, hence this patch only
provides ability to access the registers.
Backports commit f6d4dd810983fdf3d1c9fb81838167efef63d1c8 from qemu
Indicate that in the MIPS64R6-generic CPU the memory-mapped
Global Configuration Register Space is implemented.
Backports commit a9a95061715ca09abff56a3f239f704c410912c2 from qemu
Physical base address for the memory-mapped Coherency Manager Global
Configuration Register space.
The MIPS default location for the GCR_BASE address is 0x1FBF_8.
This register only exists if Config3 CMGCR is set to one.
Backports commit c870e3f52cac0c8a4a1377398327c4ff20d49d41 from qemu
To avoid cluttering the code with #ifdef legs we wrap up the print
statements into a tlb_debug() macro. As access to the virtual TLB can
get quite heavy defining DEBUG_TLB_LOG will ensure all the logs go to
the qemu_log target of CPU_LOG_MMU instead of stderr. This remains
compile time optional as these debug statements haven't been considered
for usefulness for user visible logging.
I've also removed DEBUG_TLB_CHECK which wasn't used.
Backports commit 8526e1f4e418443a4d6ed0714487e47d45ef9c98 from qemu
qemu-log: dfilter-ise exec, out_asm, op and opt_op
This ensures the code generation debug code will honour -dfilter if set.
For the "exec" tracing I've added a new inline macro for efficiency's
sake.
Backports commit d977e1c2dbc9e63454b2000f91954d02543bf43b from qemu
When debugging big programs or system emulation sometimes you want both
the verbosity of cpu,exec et all but don't want to generate lots of logs
for unneeded stuff. This patch adds a new option -dfilter which allows
you to specify interesting address ranges in the form:
-dfilter 0x8000..0x8fff,0xffffffc000080000+0x200,...
Then logging code can use the new qemu_log_in_addr_range() function to
decide if it will output logging information for the given range.
Backports commit 3514552e04388d8e7686bcf89efd022e892acb5b from qemu
Improve the TB execution logging so that it is easier to identify
what is happening from trace logs:
* move the "Trace" logging of executed TBs into cpu_tb_exec()
so that it is emitted if and only if we actually execute a TB,
and for consistency for the CPU state logging
* log when we link two TBs together via tb_add_jump()
* log when cpu_tb_exec() returns early from a chain of TBs
The new style logging looks like this:
Trace 0x7fb7cc822ca0 [ffffffc0000dce00]
Linking TBs 0x7fb7cc822ca0 [ffffffc0000dce00] index 0 -> 0x7fb7cc823110 [ffffffc0000dce10]
Trace 0x7fb7cc823110 [ffffffc0000dce10]
Trace 0x7fb7cc823420 [ffffffc000302688]
Trace 0x7fb7cc8234a0 [ffffffc000302698]
Trace 0x7fb7cc823520 [ffffffc0003026a4]
Trace 0x7fb7cc823560 [ffffffc0000dce44]
Linking TBs 0x7fb7cc823560 [ffffffc0000dce44] index 1 -> 0x7fb7cc8235d0 [ffffffc0000dce70]
Trace 0x7fb7cc8235d0 [ffffffc0000dce70]
Stopped execution of TB chain before 0x7fb7cc8235d0 [ffffffc0000dce70]
Trace 0x7fb7cc8235d0 [ffffffc0000dce70]
Trace 0x7fb7cc822fd0 [ffffffc0000dd52c]
Backports commit 1a830635229e14c403600167823ea6b3b79d3097 from qemu
Make qemu_log_mask() a macro which only calls the function to
do the actual work if the logging is enabled. This avoids making
a function call in possible fast paths where logging is disabled.
Backports commit 7ee606230e6b7645d92365d9b39179368e83ac54 from qemu
My later debugging patches need access to the origin PC which is held in
the TranslationBlock structure. Pass down the whole structure as it also
holds the information about the code start point.
Backports commit 5bd2ec3d7b47b2252745882795d79aef36380fb7 from qemu
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Backports commit f348b6d1a53e5271cf1c9f9acc4646b4b98c1771 from qemu
Not only it makes sense, but it gets rid of checkpatch warning:
WARNING: consider using qemu_strtosz in preference to strtosz
Also remove get rid of tabs to please checkpatch.
Backports commit 4677bb40f809394bef5fa07329dea855c0371697 from qemu
This patch replaces get_ticks_per_sec() calls with the macro
NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec()
is then removed. This replacement improves the readability and
understandability of code.
For example,
timer_mod(fdctrl->result_timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50));
NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns
matches the unit of the expression on the right side of the plus.
Backports commit 73bcb24d932912f8e75e1d88da0fc0ac6d4bce78 from qemu
qemu-common.h should only be included by .c files. Its file comment
explains why: "No header file should depend on qemu-common.h, as this
would easily lead to circular header dependencies."
One of the reasons for headers to include it is QEMU_ALIGN_UP() and
QEMU_ALIGN_DOWN(). Move them next to ROUND_UP() in qemu/osdep.h, to
facilitate removing these ill-advised includes later on.
Backports commit e07e540aaa08718c9ff8213067a3dcef31b3e313 from qemu
qemu-common.h should only be included by .c files. Its file comment
explains why: "No header file should depend on qemu-common.h, as this
would easily lead to circular header dependencies."
One of the reasons for headers to include it is HOST_LONG_BITS. Move
that to its more natural home qemu/osdep.h, to facilitate removing
these ill-advised includes later on.
This also lets us use HOST_LONG_BITS in bswap.h instead of duplicating
its definition there to avoid cyclic inclusion.
Backports commit a8139632161d7546218b696cada0a4f64cc78fb7 from qemu
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Backports commit da34e65cb4025728566d6504a99916f6e7e1dd6a from qemu
As soon as setjmp.h is included from qemu/osdep.h, those old include
statements are no longer needed.
Add also setjmp.h to the list in scripts/clean-includes.
Backports commit 8ff98f1ed2f50cd05c3c5027c7efdf69859ec664 from qemu
setjmp must be declared before sysemu/os-win32.h
because it is redefined there for 64 bit Windows.
Backports commit e89fdafb58038038e3ccb860c5e1068ba063bac8 from qemu
Now that the generator supports it, we might as well use an
anonymous base rather than breaking out a single-use Base
structure, for all three of our current QMP flat unions.
Oddly enough, this change does not affect the resulting
introspection output (because we already inline the members of
a base type into an object, and had no independent use of the
base type reachable from a command).
The case_whitelist now has to list the name of an implicit
type; which is not too bad (consider it a feature if it makes
it harder for developers to make the whitelist grow :)
Backports commit 3666a97f78704b941c360dc917acb14c8774eca7 from qemu
Rather than requiring all flat unions to explicitly create
a separate base struct, we can allow the qapi schema to specify
the common members via an inline dictionary. This is similar to
how commands can specify an inline anonymous type for its 'data'.
We already have several struct types that only exist to serve as
a single flat union's base; the next commit will clean them up.
In particular, this patch's change to the BlockdevOptions example
in qapi-code-gen.txt will actually be done in the real QAPI schema.
Now that anonymous bases are legal, we need to rework the
flat-union-bad-base negative test (as previously written, it
forms what is now valid QAPI; tweak it to now provide coverage
of a new error message path), and add a positive test in
qapi-schema-test to use an anonymous base (making the integer
argument optional, for even more coverage).
Note that this patch only allows anonymous bases for flat unions;
simple unions are already enough syntactic sugar that we do not
want to burden them further. Meanwhile, while it would be easy
to also allow an anonymous base for structs, that would be quite
redundant, as the members can be put right into the struct
instead.
Backports commit ac4338f8eb783fd421aae492ca262a586918471e from qemu
Simple unions were carrying a special case that hid their 'data'
QMP member from the resulting C struct, via the hack method
QAPISchemaObjectTypeVariant.simple_union_type(). But by using
the work we started by unboxing flat union and alternate
branches, coupled with the ability to visit the members of an
implicit type, we can now expose the simple union's implicit
type in qapi-types.h:
| struct q_obj_ImageInfoSpecificQCow2_wrapper {
| ImageInfoSpecificQCow2 *data;
| };
|
| struct q_obj_ImageInfoSpecificVmdk_wrapper {
| ImageInfoSpecificVmdk *data;
| };
...
| struct ImageInfoSpecific {
| ImageInfoSpecificKind type;
| union { /* union tag is @type */
| void *data;
|- ImageInfoSpecificQCow2 *qcow2;
|- ImageInfoSpecificVmdk *vmdk;
|+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2;
|+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk;
| } u;
| };
Doing this removes asymmetry between QAPI's QMP side and its
C side (both sides now expose 'data'), and means that the
treatment of a simple union as sugar for a flat union is now
equivalent in both languages (previously the two approaches used
a different layer of dereferencing, where the simple union could
be converted to a flat union with equivalent C layout but
different {} on the wire, or to an equivalent QMP wire form
but with different C representation). Using the implicit type
also lets us get rid of the simple_union_type() hack.
Of course, now all clients of simple unions have to adjust from
using su->u.member to using su->u.member.data; while this touches
a number of files in the tree, some earlier cleanup patches
helped minimize the change to the initialization of a temporary
variable rather than every single member access. The generated
qapi-visit.c code is also affected by the layout change:
|@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member
| }
| switch (obj->type) {
| case IMAGE_INFO_SPECIFIC_KIND_QCOW2:
|- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err);
|+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err);
| break;
| case IMAGE_INFO_SPECIFIC_KIND_VMDK:
|- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err);
|+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err);
| break;
| default:
| abort();
Backports commit 32bafa8fdd098d52fbf1102d5a5e48d29398c0aa from qemu
