This ports over the RISC-V architecture from Qemu. This is currently a
very barebones transition. No code hooking or any fancy stuff.
Currently, you can feed it instructions and query the CPU state itself.
This also allows choosing whether or not RISC-V 32-bit or RISC-V 64-bit
is desirable through Unicorn's interface as well.
Extremely basic examples of executing a single instruction have been
added to the samples directory to help demonstrate how to use the basic
functionality.
These changes were mostly made in upstream unicorn for what I can guess,
was to support old versions of MSVC's compiler.
This is also a pain to maintain, since everything needs to be done
manually and can be a source of errors. It also makes it take more work
than it needs to, to backport changes from qemu.
Because of that, this change restores Qemu's organization of the
coprocessor registers.
This decoding more closely matches the ARMv8.4 Table C4-6,
Encoding table for Data Processing - Register Group.
In particular, op2 == 0 is now more than just Add/sub (with carry).
Backports commit 2fba34f70d9a81bab56e61bb99a4d6632bdfe531 from qemu
We do not need an out-of-line helper for manipulating bits in pstate.
While changing things, share the implementation of gen_ss_advance.
Backports commit 22ac3c49641f6eed93dca5b852030b4d3eacf6c4 from qemu
The EL0+UMA check is unique to DAIF. While SPSel had avoided the
check by nature of already checking EL >= 1, the other post v8.0
extensions to MSR (imm) allow EL0 and do not require UMA. Avoid
the unconditional write to pc and use raise_exception_ra to unwind.
Backports commit ff730e9666a716b669ac4a8ca7c521177d1d2b15 from qemu
Minimize the number of places that will need updating when
the virtual host extensions are added.
Backports commit 64e40755cd41fbe8cd266cf387e42ddc57a449ef from qemu
Found by inspection: Rn is the base register against which the
load began; I is the register within the mask being processed.
The exception return should of course be processed from the loaded PC.
Backports commit 9d090d17234058f55c3c439d285db78c94d7d4de from qemu
Previously we weren't even initializing the instruction table, so any
attempt at emulation would cause a segmentation fault.
This also moves the end address check after the decoding to correctly
perform exiting behavior with the new translator model.
Previously we'd be checking prior to the actual decoding if we were at
the ending address. This worked fine using the old model of the
translation process in qemu. However, this causes the wrong behavior to
occur in both ARM and Thumb/Thumb-2 modes using the newer translator
model.
Given the translator itself checks for the end address already, this
needs to be placed within arm_post_translate_insn().
This prevents the emulation process being off-by-one as well when it
comes to actually executing the instructions.
1. Create an enum name for the IPSR register.
2. Implement read and write of the IPSR via the xpsr helper functions.
Fixes#1065
Backports commit 6c319941a5462ee3a4af4593c371f5674394d6ce from unicorn.
* Added MXCSR register for reading and writing
* Changed writing for fpucw register, now the qemu rounding status is updated as well
Backports commit 256e7782ceafb1f8915da167040d5368c38f9585 from unicorn
Set up MMI code to be compiled only for TARGET_MIPS64. This is
needed so that GPRs are 64 bit, and combined with MMI registers,
they will form full 128 bit registers.
Backports commit 37b9aae2e6e005e6df206a0b4804972460806166 from qemu
Note that float16_to_float32 rightly squashes SNaN to QNaN.
But of course pickNaNMulAdd, for ARM, selects SNaNs first.
So we have to preserve SNaN long enough for the correct NaN
to be selected. Thus float16_to_float32_by_bits.
Backports commit a4e943a716d5fac923d82df3eabc65d1e3624019 from qemu
There is a set of VFP instructions which we implement in
disas_vfp_v8_insn() and gate on the ARM_FEATURE_V8 bit.
These were all first introduced in v8 for A-profile, but in
M-profile they appeared in v7M. Gate them on the MVFR2
FPMisc field instead, and rename the function appropriately.
Backports commit c0c760afe800b60b48c80ddf3509fec413594778 from qemu
Instead of gating the A32/T32 FP16 conversion instructions on
the ARM_FEATURE_VFP_FP16 flag, switch to our new approach of
looking at ID register bits. In this case MVFR1 fields FPHP
and SIMDHP indicate the presence of these insns.
This change doesn't alter behaviour for any of our CPUs.
Backports commit 602f6e42cfbfe9278be34e9b91d2ceb695837e02 from qemu
Previously this was only supported for roundAndPackFloat64.
New support in round_canonical, round_to_int, float128_round_to_int,
roundAndPackFloat32, roundAndPackInt32, roundAndPackInt64,
roundAndPackUint64. This does not include any of the floatx80 routines,
as we do not have users for that rounding mode there.
Backports commit 5d64abb32ffe558e616545819f3e53dd66335994 from qemu
Handling it just like float128_to_uint32_round_to_zero, that hopefully
is free of bugs :)
Documentation basically copied from float128_to_uint64
Backports commit e45de9922e43c1ce4f4739b62142314a13029d5c from qemu
Needed on s390x, to test for the data class of a number. So it will
gain soon a user.
A number is considered normal if the exponent is neither 0 nor all 1's.
That can be checked by adding 1 to the exponent, and comparing against
>= 2 after dropping an eventual overflow into the sign bit.
While at it, convert the other floatXX_is_normal functions to use a
similar, less error prone calculation, as suggested by Richard H.
Backports commit 47393181604d507f4fe2a15a65b1eede0f974d6a from qemu
Especially when dealing with out-of-line gvec helpers, it is often
helpful to specify some vector pointers as constant. E.g. when
we have two inputs and one output, marking the two inputs as consts
pointers helps to avoid bugs.
Const pointers can be specified via "cptr", however behave in TCG just
like ordinary pointers. We can specify helpers like:
DEF_HELPER_FLAGS_4(gvec_vbperm, TCG_CALL_NO_RWG, void, ptr, cptr, cptr, i32)
void HELPER(gvec_vbperm)(void *v1, const void *v2, const void *v3,
uint32_t desc)
And make sure that here, only v1 will be written (as long as const is
not casted away, of course).
Backports commit 8c6edfdd90522caa4fc429144d393aba5b99f584 from qemu
The last update to this file was 9 years ago. In the meantime,
4 of the 6 ideas have actually been completed. The lat two do
not actually make sense anymore.
Backports commit 9e564a1dde5abc7ae4cebc115142f685d98938d7 from qemu
There are lots of special cases within these insns. Split the
major argument decode/loading/saving into no_output (compares),
rd_is_dp, and rm_is_dp.
We still need to special case argument load for compare (rd as
input, rm as zero) and vcvt fixed (rd as input+output), but lots
of special cases do disappear.
Now that we have a full switch at the beginning, hoist the ISA
checks from the code generation.
Backports commit e80941bd64cc388554770fd72334e9e7d459a1ef from qemu
Move all of the fp helpers out of helper.c into a new file.
This is code movement only. Since helper.c has no copyright
header, take the one from cpu.h for the new file.
Backports commit 37356079fcdb34e13abbed8ea0c00ca880c31247 from qemu
For opcodes 0-5, move some if conditions into the structure
of a switch statement. For opcodes 6 & 7, decode everything
at once with a second switch.
Backports commit 3c3ff68492c2d00bd8cb39ed2d02bdaf5caf5cb8 from qemu
This was introduced by
commit bf8d09694ccc07487cd73d7562081fdaec3370c8
target/arm: Don't clear supported PMU events when initializing PMCEID1
and identified by Coverity (CID 1398645).
Backports commit 67da43d668320e1bcb0a0195aaf2de4ff2a001a0 from qemu
The "background region" for a v8M MPU is a default which will be used
(if enabled, and if the access is privileged) if the access does
not match any specific MPU region. We were incorrectly using it
always (by putting the condition at the wrong nesting level). This
meant that we would always return the default background permissions
rather than the correct permissions for a specific region, and also
that we would not return the right information in response to a
TT instruction.
Move the check for the background region to the same place in the
logic as the equivalent v8M MPUCheck() pseudocode puts it.
This in turn means we must adjust the condition we use to detect
matches in multiple regions to avoid false-positives.
Backports commit cff21316c666c8053b1f425577e324038d0ca30d from qemu
The next commit wants to generate qapi-emit-events.{c.h}. To enable
that, extend QAPISchemaModularCVisitor to support additional "system
modules", i.e. modules that don't correspond to a (user-defined) QAPI
schema module.
Backports commit c2e196a9b41235a308fb6d1c516aa91ba0a807c8 from qemu
We neglect to call .visit_module() for the special module we use for
built-ins. Harmless, but clean it up anyway. The
tests/qapi-schema/*.out now show the built-in module as 'module None'.
Subclasses of QAPISchemaModularCVisitor need to ._add_module() this
special module to enable code generation for built-ins. When this
hasn't been done, QAPISchemaModularCVisitor.visit_module() does
nothing for the special module. That looks like built-ins could
accidentally be generated into the wrong module when a subclass
neglects to call ._add_module(). Can't happen, because built-ins are
all visited before any other module. But that's non-obvious. Switch
off code generation explicitly.
Rename QAPISchemaModularCVisitor._begin_module() to
._begin_user_module().
New QAPISchemaModularCVisitor._is_builtin_module(), for clarity.
Backports commit dcac64711ea906e844ae60a5927e5580f7252c1e from qemu
Fortunately, the functions affected are so far only called from SVE,
so there is no tail to be cleared. But as we convert more of AdvSIMD
to gvec, this will matter.
Backports commit d8efe78e8039511b95c23d75bb48eca6873fbb0f from qemu