The crypto emulation code in target-arm/crypto_helper.c never worked
correctly on big endian hosts, due to the fact that it uses a union
of array types to convert between the native VFP register size (64
bits) and the types used in the algorithms (bytes and 32 bit words)
We cannot just swab between LE and BE when reading and writing the
registers, as the SHA code performs word additions, so instead, add
array accessors for the CRYPTO_STATE type whose LE and BE specific
implementations ensure that the correct array elements are referenced.
Backports commit b449ca3c1874418d948878d5417a32fc0dbf9fea from qemu
Added a "has_el3" state property to the ARMCPU descriptor. This property
indicates whether the ARMCPU has security extensions enabled (EL3) or not.
By default it is disabled at this time.
Backports commit 51942aee3c51ca23b0dd78f95534a57e8dc1e582 from qemu
Add an unset_feature() function to compliment the set_feature() function. This
will be used to disable functions after they have been enabled during
initialization.
Backports commit 08828484a5c1ec55a6cbb4b4d377bfcf41199b5c from qemu
Merge of the v8_el2_cp_reginfo and el3_cp_reginfo ARMCPRegInfo lists.
Previously, some EL3 registers were restricted to the ARMv8 list under the
impression that they were not needed on ARMv7. However, this is not the case
as the ARMv7/32-bit variants rely on the ARMv8/64-bit variants to handle
migration and reset. For this reason they must always exist.
Backports commit 60fb1a87b47b14e4ea67043aa56f353e77fbd70a from qemu
When EL3 is running in AArch32 (or ARMv7 with Security Extensions)
FCSEIDR, CONTEXTIDR, TPIDRURW, TPIDRURO and TPIDRPRW have a secure
and a non-secure instance.
Backports commit 54bf36ed351c526cde0c853079f9ff1ab7e2ff89 from qemu
When EL3 is running in Aarch32 (or ARMv7 with Security Extensions)
VBAR has a secure and a non-secure instance, which are mapped to
VBAR_EL1 and VBAR_EL3.
Backports commit fb6c91ba2bb0b1c1b8662ceeeeb9474a025f9a6b from qemu
When EL3 is running in AArch32 (or ARMv7 with Security Extensions)
PAR has a secure and a non-secure instance.
Backports commit 01c097f7960b330c4bf038d34bae17ad6c1ba499 from qemu
When EL3 is running in AArch32 (or ARMv7 with Security Extensions)
IFAR and DFAR have a secure and a non-secure instance.
Backports commit b848ce2b9cbd38da3f2530fd93dba76dba0621c0 from qemu
When EL3 is running in AArch32 (or ARMv7 with Security Extensions)
DFSR has a secure and a non-secure instance.
Backports commit 4a7e2d7315bd2ce28e49ccd0bde73eabdfd7437b from qemu
When EL3 is running in AArch32 (or ARMv7 with Security Extensions)
IFSR has a secure and a non-secure instance. Adds IFSR32_EL2 definition and
storage.
Backports commit 88ca1c2d70523486a952065f3ed7b8fc823b5863 from qemu
When EL3 is running in AArch32 (or ARMv7 with Security Extensions)
DACR has a secure and a non-secure instance. Adds definition for DACR32_EL2.
Backports commit 0c17d68c1d3d6c35f37f5692042d2edb65c8bcc0 from qemu
Adds secure and non-secure bank register suport for TTBCR.
Added new struct to compartmentalize the TCR data and masks. Removed old
tcr/ttbcr data and added a 4 element array of the new structs in cp15. This
allows for one entry per EL. Added a CP register definition for TCR_EL3.
Backports commit 11f136ee25232a00f433cefe98ee33cd614ecccc from qemu
Adds secure and non-secure bank register suport for TTBR0 and TTBR1.
Changes include adding secure and non-secure instances of ttbr0 and ttbr1 as
well as a CP register definition for TTBR0_EL3. Added a union containing
both EL based array fields and secure and non-secure fields mapped to them.
Updated accesses to use A32_BANKED_CURRENT_REG_GET macro.
Backports commit 7dd8c9af0d9d18fb3e54a4843b3bb1398bd330bc to qemu
Add checks of SCR AW/FW bits when performing writes of CPSR. These SCR bits
are used to control whether the CPSR masking bits can be adjusted from
non-secure state.
Backports commit 6e8801f9dea9e10449f4fd7d85dbe8cab708a686 from qemu
Use MVBAR register as exception vector base address for
exceptions taken to CPU monitor mode.
Backports commit e89e51a17ea0d8aef9bf9b766c98f963e835fbf2 from qemu
Added CP register defintions for SDER and SDER32_EL3 as well as cp15.sder for
register storage.
Backports commit 144634ae6c1618dcee6aced9c0d4427844154091 from qemu
Implements NSACR register with corresponding read/write functions
for ARMv7 and ARMv8.
Backports commit 770225764f831031d2e1453f69c365eb1b647d87 from qemu
SCR.{IRQ/FIQ} bits allow to route IRQ/FIQ exceptions to monitor CPU
mode. When taking IRQ exception to monitor mode FIQ exception is
additionally masked.
Backports commit de38d23b542efca54108ef28bcc0efe96f378d2e from qemu
Define a new ARM CP register info list for the ARMv7 Security Extension
feature. Register that list only for ARM cores with Security Extension/EL3
support. Moving AArch32 SCR into Security Extension register group.
Backports commit 0f1a3b2470d798ad5335eb9d6236f02ff64e31a8 from qemu
Prepare for cp register banking by inserting every cp register twice,
once for secure world and once for non-secure world.
Backports commit 3f3c82a57d128aa3ec823aa8032867c3a6e2e795 from qemu
Added additional NS-bit to CPREG hash encoding. Updated hash lookup
locations to specify hash bit currently set to non-secure.
Backports commit 51a79b039728277e35fd19f7a7b4bc6cb323697f from qemu
Prepare ARMCPRegInfo to support specifying two fieldoffsets per
register definition. This will allow us to keep one register
definition for banked registers (different offsets for secure/
non-secure world).
Also added secure state tracking field and flags. This allows for
identification of the register info secure state.
Backports commit c3e302606253a17568dc3ef30238f102468f7ee1 from qemu
This patch is based on idea found in patch at
git://github.com/jowinter/qemu-trustzone.git
f3d955c6c0ed8c46bc0eb10b634201032a651dd2 by
Johannes Winter <johannes.winter@iaik.tugraz.at>.
The TBFLAG captures the SCR NS secure state at the time when a TB is created so
the correct bank is accessed on system register accesses.
Backports commit 3f342b9e0e64ad681cd39840bfa75ef12d2807c1 from qemu
If EL3 is in AArch32 state certain cp registers are banked (secure and
non-secure instance). When reading or writing to coprocessor registers
the following macros can be used.
- A32_BANKED macros are used for choosing the banked register based on provided
input security argument. This macro is used to choose the bank during
translation of MRC/MCR instructions that are dependent on something other
than the current secure state.
- A32_BANKED_CURRENT macros are used for choosing the banked register based on
current secure state. This is NOT to be used for choosing the bank used
during translation as it breaks monitor mode.
If EL3 is operating in AArch64 state coprocessor registers are not
banked anymore. The macros use the non-secure instance (_ns) in this
case, which is architecturally mapped to the AArch64 EL register.
Backports commit ea30a4b824ecc3c829b70eb9999ac5457dc5790f from qemu
Adds a dedicated function and a lookup table for determining the target
exception level of IRQ and FIQ exceptions. The lookup table is taken from the
ARMv7 and ARMv8 specification exception routing tables.
Backports commit 0eeb17d618361a0f4faddc160e33598b23da6dd5 from qemu
This patch extends arm_excp_unmasked() to use lookup tables for determining
whether IRQ and FIQ exceptions are masked. The lookup tables are based on the
ARMv8 and ARMv7 specification physical interrupt masking tables.
If EL3 is using AArch64 IRQ/FIQ masking is ignored in all exception levels
other than EL3 if SCR.{FIQ|IRQ} is set to 1 (routed to EL3).
Backports commit 57e3a0c7cb0ac2f0288890482e0a463adce2080a from qemu
Using rs = -1 in gen_logic_imm() for microMIPS LUI instruction is dangerous
and may bite us when implementing microMIPS R6 because in R6 AUI and LUI
are distinguished by rs value. Therefore use 0 for safety.
Backports commit 5e88759a52934a32502298f2c78c6dfaa144364b from qemu
The test is supposed to terminate TB if the end of the page is reached.
However, with current implementation it may never succeed for microMIPS or
mips16.
Backports commit fe2372910a09034591fd2cfc2d70cca43fccaa95 from qemu
Commit fecd264 added a number of fall-throughs, but neglected to
properly document them as intentional. Commit d922445 cleaned that up
for many, but not all cases. Take care of the remaining ones.
Backports commit b6f3b233eabb4df5d65ae9fbfb3d3c8befea0de7 from qemu
Reduce line wrapping throughout MSA helper macros by using a local float
status pointer rather than referring to the float status through the
environment each time. No functional change.
Backports commit 1a4d570017bf35d99340781ecb59dd3772464031 from qemu
Add missing calls to synchronise the SoftFloat status with the CP1.FSCR:
+ for the rounding and flush-to-zero modes upon processor reset,
+ for the flush-to-zero mode on FSCR updates through the GDB stub.
Refactor code accordingly and remove the redundant RESTORE_ROUNDING_MODE
macro.
Backports commit bb962386b82c1b0e9e12fdb6b9bb62106bf1f822 from qemu
Make CP0.Status writes made with the MTTC0 instruction respect this
register's mask just like all the other places. Also preserve the
current values of masked out bits.
Backports commit 1d725ae952a14b30c84b7bc81b218b8ba77dd311 from qemu
Make sure the address space is unconditionally wrapped on 32-bit
processors, that is ones that do not implement at least the MIPS III
ISA.
Also make MIPS16 SAVE and RESTORE instructions use address calculation
rather than plain arithmetic operations for stack pointer manipulation
so that their semantics for stack accesses follows the architecture
specification. That in particular applies to user software run on
64-bit processors with the CP0.Status.UX bit clear where the address
space is wrapped to 32 bits.
Backports commit c48245f0c62405f27266fcf08722d8c290520418 from qemu
Tighten ISA level checks down to MIPS II that many of our instructions
are missing. Also make sure any 64-bit instruction enables are only
applied to 64-bit processors, that is ones that implement at least the
MIPS III ISA.
Backports commit d9224450208e0de62323b64ace91f98bc31d6e2c from qemu
Fix CP0.Config3.ISAOnExc write accesses on microMIPS processors. This
bit is mandatory for any processor that implements the microMIPS
instruction set. This bit is r/w for processors that implement both the
standard MIPS and the microMIPS instruction set. This bit is r/o and
hardwired to 1 if only the microMIPS instruction set is implemented.
There is no other bit ever writable in CP0.Config3 so defining a
corresponding `CP0_Config3_rw_bitmask' member in `CPUMIPSState' is I
think an overkill. Therefore make the ability to write the bit rely on
the presence of ASE_MICROMIPS set in the instruction flags.
The read-only case of the microMIPS instruction set being implemented
only can be added when we add support for such a configuration. We do
not currently have such support, we have no instruction flag that would
control the presence of the standard MIPS instruction set nor any
associated code in instruction decoding.
This change is needed to boot a microMIPS Linux kernel successfully,
otherwise it hangs early on as interrupts are enabled and then the
exception handler invoked loops as its first instruction is interpreted
in the wrong execution mode and triggers another exception right away.
And then over and over again.
We already check the current setting of the CP0.Config3.ISAOnExc in
`set_hflags_for_handler' to set the ISA bit correctly on the exception
handler entry so it is the ability to set it that is missing only.
Backports commit 90f12d735d66ac1196d9a2bced039a432eefc03d from qemu
Fix microMIPS MOVE16 and MOVEP instructions on 64-bit processors by
using register addition operations.
This copies the approach taken with MIPS16 MOVE instructions (I8_MOV32R
and I8_MOVR32 opcodes) and follows the observation that OPC_ADDU expands
to tcg_gen_mov_tl whenever `rt' is 0 and `rs' is not, therefore copying
`rs' to `rd' verbatim. This is not the case with OPC_ADDIU where a
sign-extension from bit #31 is made, unless in the uninteresting case of
`rs' being 0, losing the upper 32 bits of the value copied for any
proper 64-bit values.
This also serves as an optimization as one op is produced in generated
code rather than two (again, unless `rs' is 0, where it doesn't change
anything).
Backports commit 7215d7e7aea85699bf516c3e8d84f6a22584da35 from qemu
Make writes to CP0.Status and CP0.Cause have the same effect as
executing corresponding MTC0 instructions would in Kernel Mode. Also
ignore writes in the user emulation mode.
Currently for requests from the GDB stub we write all the bits across
both registers, ignoring any read-only locations, and do not synchronise
the environment to evaluate side effects. We also write these registers
in the user emulation mode even though a real kernel presents them as
read only.
Backports commit 81a423e6c6d3ccaa79de4e58024369c660c1eeb4 from qemu
Correct these issues with the handling of CP0.Status for MIPSr6:
* only ignore the bit pattern of 0b11 on writes to CP0.Status.KSU, that
is for processors that do implement Supervisor Mode, let the bit
pattern be written to CP0.Status.UM:R0 freely (of course the value
written to read-only CP0.Status.R0 will be discarded anyway); this is
in accordance to the relevant architecture specification[1],
* check the newly written pattern rather than the current contents of
CP0.Status for the KSU bits being 0b11,
* use meaningful macro names to refer to CP0.Status bits rather than
magic numbers.
References:
[1] "MIPS Architecture For Programmers, Volume III: MIPS64 / microMIPS64
Privileged Resource Architecture", MIPS Technologies, Inc., Document
Number: MD00091, Revision 6.00, March 31, 2014, Table 9.45 "Status
Register Field Descriptions", pp. 210-211.
Backports commit f88f79ec9df06d26d84e1d2e0c02d2634b4d8583 from qemu
Correct MIPS16/microMIPS branch size calculation in PC adjustment
needed:
- to set the value of CP0.ErrorEPC at the entry to the reset exception,
- for the purpose of branch reexecution in the context of device I/O.
Follow the approach taken in `exception_resume_pc' for ordinary, Debug
and NMI exceptions.
MIPS16 and microMIPS branches can be 2 or 4 bytes in size and that has
to be reflected in calculation. Original MIPS ISA branches, which is
where this code originates from, are always 4 bytes long, just as all
original MIPS ISA instructions.
Backports commit c3577479815f5bcf9d38993967bca2115af245d8 from qemu
