Remove is_mem as it is never tested anymore since:
commit bfa50bc2638d877cf2900712b7503be22e8811cb
Backports commit 805167adcb900fa7b2b114d639c418f5313d0b42 from qemu
When taking an exception print the content of the exception link
register. This is useful especially for synchronous exceptions because
in that case this registers holds the address of the instruction that
generated the exception.
Backports commit b21ab1fc217b4a2b8f2f85d16bdd8510a7817a34 from qemu
Define a new CPU definition supporting MIPS32 Release 6 ISA and
microMIPS32 Release 6 ISA.
Backports commit 4b3bcd016d83cc75f6a495c1db54b6c77f037adc from qemu
Signal a Reserved Instruction exception for removed instruction encoding
in microMIPS Release 6.
Backports commit 9e8f441a7e094c0dc33a1c8f521d9e5bcfc1b4da from qemu
64-bit paired-single (PS) floating point data type is optional in the
pre-Release 6.
It has to raise RI exception when PS type is not implemented. (FIR.PS = 0)
(The PS data type is removed in the Release 6.)
Loongson-2E and Loongson-2F don't have any implementation field in
FCSR0(FIR) but do support PS data format, therefore for these cores RI will
not be signalled regardless of PS bit.
Backports commit e29c962804c4dd3fabd44e703aa87eec555ed910 from qemu
Refactor those instructions in order to reuse them for microMIPS32
Release 6.
Rearrange gen_move_low32().
Backports commit 1f1b4c008e250f870719ed38fbd0bcc14322fc01 from qemu
Remove it except for two things in qerror.h:
* Two #include to be cleaned up separately to avoid cluttering this
patch.
* The QERR_ macros. Mark as obsolete.
Backports commit 4629ed1e98961bbe678db68ef5f4342ff174a6c3 from qemu
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Backports commit c6bd8c706a799eb0fece99f468aaa22b818036f3 from qemu
Error classes other than ERROR_CLASS_GENERIC_ERROR should not be used
in new code. Hiding them in QERR_ macros makes new uses hard to spot.
Fortunately, there's just one such macro left. Eliminate it with this
coccinelle semantic patch:
@@
expression EP, E;
@@
-error_set(EP, QERR_DEVICE_NOT_FOUND, E)
+error_set(EP, ERROR_CLASS_DEVICE_NOT_FOUND, "Device '%s' not found", E)
Backports commit 75158ebbe259f0bd8bf435e8f4827a43ec89c877 from qemu
Now that qbool is fixed, let's fix getting and setting a bool
value to a qdict member to also use C99 bool rather than int.
I audited all callers to ensure that the changed return type
will not cause any changed semantics.
Backports commit 34acbc95229f9f841bde83691a5af949c15e105b from qemu
We require a C99 compiler, so let's use 'bool' instead of 'int'
when dealing with boolean values. There are few enough clients
to fix them all in one pass.
Backports commit fc48ffc39ed1060856475e4320d5896f26c945e8 from qemu
The action to potentially switch sp register is not occurring at the correct
point in the interrupt entry or exception exit sequences.
For the interrupt entry case the sp on entry is used to create the stack
exception frame - but this may well be the user stack pointer, since we
haven't done the switch yet. Re-order the flow to switch the sp regs then
use the current sp to create the exception frame.
For the return from exception case the code is unwinding the sp after
switching sp registers. But it should always unwind the supervisor sp
first, then carry out any required sp switch.
Note that these problems don't effect operation unless the user sp bit is
set in the CACR register. Only a single sp is used in the default power up
state. Previously Linux only used this single sp mode. But modern versions
of Linux use the user sp mode now, so we need correct behavior for Linux
to work.
Backports commit 0c8ff723bd29e5c8b2ca989f857ae5c37ec49c4e from qemu
Fill out the code support for the move to/from usp instructions. They are
being decoded, but there is no code to support there actions. So add it.
Current versions of Linux running on the ColdFire 5208 use these instructions.
Backports commit 2a8327e8a8288e301a2f01bc3ca2d465a3a4ca78 from qemu
Introduce a CPU model for the Cortex R5 processor. ARMv7 with MPU,
and both thumb and ARM div instructions.
Also implement dummy ATCM and BTCM. These CPs are defined for R5 but
don't have a lot of meaning in QEMU yet. Raz them so the guest can
proceed if they are read. The TCM registers will return a size of 0,
indicating no TCM.
Backports commit d6a6b13ea1dfeb25c43a648e94cfe4395906f1da from qemu
Unified MPU only. Uses ARM architecture major revision to switch
between PMSAv5 and v7 when ARM_FEATURE_MPU is set. PMSA v6 remains
unsupported and is asserted against.
Backports commit f6bda88ff839e2adefe4959b7def420b90703855 from qemu
Define the arm CP registers for PMSAv7 and their accessor functions.
RGNR serves as a shared index that indexes into arrays storing the
DRBAR, DRSR and DRACR registers. DRBAR and friends have to be VMSDd
separately from the CP interface using a new PMSA specific VMSD
subsection.
Backports commit 6cb0b013a1fa421cdfb83257cd33f855cc90649a from qemu
Define the MPUIR register for MPU supporting ARMv6 and onwards.
Currently we only support unified MPU.
The size of the unified MPU is defined via the number of "dregions".
So just a single config is added to specify this size. (When split MPU
is implemented we will add an extra iregions config).
Backports commit 3281af8114c6b8ead02f08b58e3c36895c1ea047 from qemu
cp_reg_reset() is called from g_hash_table_foreach() which does not
define a specific ordering of the hash table iteration. Thus doing reset
for registers marked as ALIAS would give an ambiguous result when
resetvalue is different for original and alias registers. Exit
cp_reg_reset() early when passed an alias register. Then clean up alias
register definitions from needless resetvalue and resetfn.
In particular, this fixes a bug in the handling of the PMCR register,
which had different resetvalues for its 32 and 64-bit views.
Backports commit b061a82b8afcc45ce09d770d9c0acdf429401054 from qemu
This patch adds the Cortex-M4 CPU. The M4 is basically the same as
the M3, the main differences being the DSP instructions and an
optional FPU. Only no-FPU cortex-M4 is implemented here, cortex-M4F
is not because the core target-arm code doesn't support the M-profile
FPU model yet.
Backports commit ba890a9b2509a0087bb7eafddae02ea5ecbb7bb4 from qemu
The tb_check_watchpoint function currently assumes that all memory
access is done either directly through the TCG code or through an
helper which knows its return address. This is obviously wrong as the
helpers use cpu_ldxx/stxx_data functions to access the memory.
Instead of aborting in that case, don't try to retranslate the code, but
assume that the CPU state (and especially the program counter) has been
saved before calling the helper. Then invalidate the TB based on this
address.
Backports commit 8d302e76755b8157373073d7107e31b0b13f80c1 from qemu
To avoid to many #ifdef in target code, provide a tlb_vaddr_to_host for
both user and softmmu modes. In the first case the function always
succeed and just call the g2h function.
Backports commit 2e83c496261c799b0fe6b8e18ac80cdc0a5c97ce from qemu
The architecture defines that when taking an exception trying to
access a coprocessor register, the "preferred return address" for
the exception is the address of the instruction that caused the
exception. Correct an off-by-4 error which meant we were returning
the address after the instruction for traps which happened because
of a failure of a runtime access-check function on an AArch32
register. (Traps caused by translate-time checkable permissions
failures had the correct address, as did traps on AArch64 registers.)
This fixes https://bugs.launchpad.net/qemu/+bug/1463338
Backports commit 3977ee5d7a9f2e3664dd8b233f3224694e23b62b from qemu
For processors that support MPUs, add a property to de-feature it. This
is similar to the implementation of the EL3 feature.
The processor definition in init sets ARM_FEATURE_MPU if it can support
an MPU. post_init exposes the property, defaulting to true. If cleared
by the instantiator, ARM_FEATURE_MPU is then removed at realize time.
This is to support R profile processors that may or may-not have an MPU
configured.
Backports commit 8f325f568fbd0158cd413e7d637573ba90b3eaab from qemu
Add a boolean for indicating uniprocessors with MP extensions. This
drives the U bit in MPIDR. Prepares support for Cortex-R5.
Backports commit a8e81b319d1ae1224cc7059877dcdf04a5aad59d from qemu
Currently, the return code for get_phys_addr is overloaded for both
success/fail and FSR value return. This doesn't handle the case where
there is an error with a 0 FSR. This case exists in PMSAv7.
So rework get_phys_addr and friends to return a success/failure boolean
return code and populate the FSR via a caller provided uint32_t
pointer.
Backports commit b7cc4e82f04a1c5b218a657f677a2fdd1e1c2889 from qemu
V6+ PMSA and VMSA share some common registers that are currently
in the VMSA definition block. Split them out into a new def that can
be shared to PMSA.
Backports commit 8e5d75c950a1241f6e1243c37f28cd58f68fedc9 from qemu
These registers are VMSA specific so they should be conditional on
VMSA (i.e. !MPU).
Backports commit 5e5cf9e35f25f9f932a6ce25107c11b67b426a43 from qemu
If doing a PMSA (MPU) system do not define the VMSA specific TLBTR CP.
The def is done separately from VMSA registers group as it is affected
by both the OMAP/STRONGARM RW errata and the MIDR backgrounding.
Backports commit 8085ce63c5967d200f1241b6c0a189371993c5df from qemu
When we're using KVM, the kernel's internal idea of the MPIDR
affinity fields must match the values we tell it for the guest
vcpu cluster configuration in the device tree. Since at the moment
the kernel doesn't support letting userspace tell it the correct
affinity fields to use, we must read the kernel's view and
reflect that back in the device tree.
Backports commit eb5e1d3c85dffe677da2550d211f9304a7d5ba3b from qemu
According to ARMv8 ARM, there are additional aliases to MIDR system register in
AArch32 state. So add them to the list.
Backports commit ac00c79ff6635ae9fd732ff357ada0d05e795500 from qemu
According to ARM Cortex-A53/A57 TRM, REVIDR reset value should be zero. So let
REVIDR reset value be specified by CPU model and correct it for Cortex-A53/A57.
Backports commit 13b72b2b9aa7ab7ee129e38e9587acd6a1b9a932 from qemu
This isn't used by any of the code. In fact it looks like it was never
used as it came in with ARMv7 support.
Backports commit a79e0218e0ae27c9cdd2648bd46e5a916c903cc2 from qemu
Since ARMv7 with LPAE support, a supersection short translation table
descriptor has had extended base address fields which hold bits 39:32 of
translated address. These fields are IMPDEF in ARMv6 and ARMv7 without
LPAE support.
Backports commit 4e42a6ca37e39e56725518851f4388e46bd91129 from qemu
The old ARMv5-style page table format includes a kind of second level
descriptor named the "extended small page" format, whose primary purpose
is to allow specification of the TEX memory attribute bits on a 4K page.
This exists on ARMv6 and also (as an implementation extension) on XScale
CPUs; it's UNPREDICTABLE on v5.
We were mishandling this in two ways:
(1) we weren't implementing it for v6 (probably never noticed because
Linux will use the new-style v6 page table format there)
(2) we were not correctly setting the page_size, which is 4K, not 1K
The latter bug went unnoticed for years because the only thing which
the page_size affects is which TLB entries get flushed when the guest
does a TLB invalidate on an address in the page, and prior to commit
2f0d8631b7 we were doing a full TLB flush very frequently due to Linux's
habit of writing the SCTLR pointlessly a lot.
(We can assume that after commit 2f0d8631b7 the bug went unnoticed
for a year because nobody's actually using the Zaurus/XScale emulation...)
Report the correct page size for these descriptors, and permit them
on ARMv6 CPUs. This fixes a problem where a kernel image for Zaurus
can boot the kernel OK but gets random segfaults when it tries to
run userspace programs.
Backports commit fc1891c74ae122a9dc7854f38bae7db03cd911e6 from qemu
