Avoid redundant computation of cpu state by passing it in
from the caller, which has already computed it for itself.
Backports commit be87955687446be152f366af543c9234eab78a7c from qemu
This inline function has one user in cpu.c, and need not be exposed
otherwise. Code movement only, with fixups for checkpatch.
Backports commit 310cedf39dea240a89f90729fd99481ff6158e90 from qemu
When VHE is enabled, the exception level below EL2 is not EL1,
but EL0, and so to identify the entry vector offset for exceptions
targeting EL2 we need to look at the width of EL0, not of EL1.
Backports commit cb092fbbaeb7b4e91b3f9c53150c8160f91577c7 from qemu
The EL2&0 translation regime is affected by Load Register (unpriv).
The code structure used here will facilitate later changes in this
area for implementing UAO and NV.
Backports commit cc28fc30e333dc2f20ebfde54444697e26cd8f6d from qemu
Since we only support a single ASID, flush the tlb when it changes.
Note that TCR_EL2, like TCR_EL1, has the A1 bit that chooses between
the two TTBR* registers for the location of the ASID.
Backports commit d06dc93340825030b6297c61199a17c0067b0377 from qemu
Apart from the wholesale redirection that HCR_EL2.E2H performs
for EL2, there's a separate redirection specific to the timers
that happens for EL0 when running in the EL2&0 regime.
Backports commit bb5972e439dc0ac4d21329a9d97bad6760ec702d from qemu
Several of the EL1/0 registers are redirected to the EL2 version when in
EL2 and HCR_EL2.E2H is set. Many of these registers have side effects.
Link together the two ARMCPRegInfo structures after they have been
properly instantiated. Install common dispatch routines to all of the
relevant registers.
The same set of registers that are redirected also have additional
EL12/EL02 aliases created to access the original register that was
redirected.
Omit the generic timer registers from redirection here, because we'll
need multiple kinds of redirection from both EL0 and EL2.
Backports commit e2cce18f5c1d0d55328c585c8372cdb096bbf528 from qemu
The comment that we don't support EL2 is somewhat out of date.
Update to include checks against HCR_EL2.TDZ.
Backports commit 4351cb72fb65926136ab618c9e40c1f5a8813251 from qemu
Use the correct sctlr for EL2&0 regime. Due to header ordering,
and where arm_mmu_idx_el is declared, we need to move the function
out of line. Use the function in many more places in order to
select the correct control.
Backports commit aaec143212bb70ac9549cf73203d13100bd5c7c2 from qemu
Return the indexes for the EL2&0 regime when the appropriate bits
are set within HCR_EL2.
Backports commit 6003d9800ee38aa11eefb5cd64ae55abb64bef16 from qemu
Create a predicate to indicate whether the regime has
both positive and negative addresses.
Backports commit 339370b90d067345b69585ddf4b668fa01f41d67 from qemu
Prepare for, but do not yet implement, the EL2&0 regime.
This involves adding the new MMUIdx enumerators and adjusting
some of the MMUIdx related predicates to match.
Backports commit b9f6033c1a5fb7da55ed353794db8ec064f78bb2 from qemu.
Replace the magic numbers with the relevant ARM_MMU_IDX_M_* constants.
Keep the definitions short by referencing previous symbols.
Backports commit 25568316b2a7e73d68701042ba6ebdb217205e20 from qemu
Define via macro expansion, so that renumbering of the base ARMMMUIdx
symbols is automatically reflected in the bit definitions.
Backports commit 5f09a6dfbfbff4662f52cc3130a2e07044816497 from qemu
We are about to expand the number of mmuidx to 10, and so need 4 bits.
For the benefit of reading the number out of -d exec, align it to the
penultimate nibble.
Backports commit 506f149815c2168f16ade17893e117419d93f248 from qemu
We had completely run out of TBFLAG bits.
Split A- and M-profile bits into two overlapping buckets.
This results in 4 free bits.
We used to initialize all of the a32 and m32 fields in DisasContext
by assignment, in arm_tr_init_disas_context. Now we only initialize
either the a32 or m32 by assignment, because the bits overlap in
tbflags. So zero the entire structure in gen_intermediate_code.
Backports commit 79cabf1f473ca6e9fa0727f64ed9c2a84a36f0aa from qemu
This is part of a reorganization to the set of mmu_idx.
The non-secure EL2 regime only has a single stage translation;
there is no point in pointing out that the idx is for stage1.
Backports commit e013b7411339342aac8d986c5d5e329e1baee8e1 from qemu
This is part of a reorganization to the set of mmu_idx.
The EL3 regime only has a single stage translation, and
is always secure.
Backports commit 127b2b086303296289099a6fb10bbc51077f1d53 from qemu
This is part of a reorganization to the set of mmu_idx.
This emphasizes that they apply to the Secure EL1&0 regime.
Backports commit fba37aedecb82506c62a1f9e81d066b4fd04e443 from qemu
This is part of a reorganization to the set of mmu_idx.
The EL1&0 regime is the only one that uses 2-stage translation.
Spelling out Stage avoids confusion with Secure.
Backports commit 2859d7b590760283a7b5aef40b723e9dfd7c98ba from qemu
This is part of a reorganization to the set of mmu_idx.
This emphasizes that they apply to the EL1&0 regime.
The ultimate goal is
-- Non-secure regimes:
ARMMMUIdx_E10_0,
ARMMMUIdx_E20_0,
ARMMMUIdx_E10_1,
ARMMMUIdx_E2,
ARMMMUIdx_E20_2,
-- Secure regimes:
ARMMMUIdx_SE10_0,
ARMMMUIdx_SE10_1,
ARMMMUIdx_SE3,
-- Helper mmu_idx for non-secure EL1&0 stage1 and stage2
ARMMMUIdx_Stage2,
ARMMMUIdx_Stage1_E0,
ARMMMUIdx_Stage1_E1,
The 'S' prefix is reserved for "Secure". Unless otherwise specified,
each mmu_idx represents all stages of translation.
Backports commit 01b98b686460b3a0fb47125882e4f8d4268ac1b6 from qemu
At the same time, add writefn to TTBR0_EL2 and TCR_EL2.
A later patch will update any ASID therein.
Backports commit ed30da8eee6906032b38a84e4807e2142b09d8ec from qemu
Not all of the breakpoint types are supported, but those that
only examine contextidr are extended to support the new register.
Backports commit e2a1a4616c86159eb4c07659a02fff8bb25d3729 from qemu
When support for the AHP flag was added we inexplicably only freed the
new temps in one of the two legs. Move those tcg_temp_free to the same
level as the allocation to fix that leak.
Backports commit aeab8e5eb220cc5ff84b0b68b9afccc611bf0fcd from qemu
Implement emulation of GINVT instruction. As QEMU doesn't support
caches and virtualization, this implementation covers only one
instruction (GINVT - Global Invalidate TLB) among all TLB-related
MIPS instructions.
Backports commit 99029be1c2875cd857614397674bbf563ddb6f91 from qemu
WatchHi is extended by the field MemoryMapID with the GINVT instruction.
The field is accessible by MTHC0/MFHC0 in 32-bit architectures and DMTC0/
DMFC0 in 64-bit architectures.
Backports commit feafe82cc2289a31b3e3f11dc76f3539ea22d670 from qemu
This fixes a confusion in the help output. (Although, if you squint
long enough at the '-cpu help' output, you _do_ notice that
"Skylake-Client-noTSX-IBRS" is an alias of "Skylake-Client-v3";
similarly for Skylake-Server-v3.)
Without this patch:
$ qemu-system-x86 -cpu help
...
x86 Skylake-Client-v1 Intel Core Processor (Skylake)
x86 Skylake-Client-v2 Intel Core Processor (Skylake, IBRS)
x86 Skylake-Client-v3 Intel Core Processor (Skylake, IBRS)
...
x86 Skylake-Server-v1 Intel Xeon Processor (Skylake)
x86 Skylake-Server-v2 Intel Xeon Processor (Skylake, IBRS)
x86 Skylake-Server-v3 Intel Xeon Processor (Skylake, IBRS)
...
With this patch:
$ ./qemu-system-x86 -cpu help
...
x86 Skylake-Client-v1 Intel Core Processor (Skylake)
x86 Skylake-Client-v2 Intel Core Processor (Skylake, IBRS)
x86 Skylake-Client-v3 Intel Core Processor (Skylake, IBRS, no TSX)
...
x86 Skylake-Server-v1 Intel Xeon Processor (Skylake)
x86 Skylake-Server-v2 Intel Xeon Processor (Skylake, IBRS)
x86 Skylake-Server-v3 Intel Xeon Processor (Skylake, IBRS, no TSX)
Backports commit 673b0add9ea7f432f34c1c99eaa7c567012fc838 from qemu
When executing an xRET instruction, supposing xPP holds the
value y, xIE is set to xPIE; the privilege mode is changed to y;
xPIE is set to 1. But QEMU sets xPIE to 0 incorrectly.
Backports commit a37f21c27d3e2342c2080aafd4cfe7e949612428 from qemu
In the PAC computation, sbox was applied over wrong bits.
As this is a 4-bit sbox, bit index should be incremented by 4 instead of 16.
Test vector from QARMA paper (https://eprint.iacr.org/2016/444.pdf) was
used to verify one computation of the pauth_computepac() function which
uses sbox2.
Launchpad: https://bugs.launchpad.net/bugs/1859713
Backports commit de0b1bae6461f67243282555475f88b2384a1eb9 from qemu
The PMU is not optional on cortex-r5 and cortex-r5f (see
the "Features" chapter of the Technical Reference Manual).
Backports commit 90f671581ac601fcc1b840d9e9abe7e3c3e672db from qemu
A regression that was introduced, with the refactor to TranslatorOps,
drops two lines that update the PC when single-stepping is being performed.
Fixes: 11ab74b01e0a ("target/m68k: Convert to TranslatorOps")
Backports commit 322f244aaa80a5208090d41481c1c09c6face66b from qemu
During the conversion to decodetree, the setting of
ISSIs16Bit got lost. This causes the guest os to
incorrectly adjust trapping memory operations.
Backports commit 1a1fbc6cbb34c26d43d8360c66c1d21681af14a9 from qemu
