Do not yet convert the helpers to loop over opr_sz, but the
descriptor allows the vector tail to be cleared. Which fixes
an existing bug vs SVE.
Backports commit aaffebd6d3135b8aed7e61932af53b004d261579 from qemu
With this conversion, we will be able to use the same helpers
with sve. This also fixes a bug in which we failed to clear
the high bits of the SVE register after an AdvSIMD operation.
Backports commit 1738860d7e60dec5dbeba17f8b44d31aae3accac from qemu
With this conversion, we will be able to use the same helpers
with sve. In particular, pass 3 vector parameters for the
3-operand operations; for advsimd the destination register
is also an input.
This also fixes a bug in which we failed to clear the high bits
of the SVE register after an AdvSIMD operation.
Backports commit a04b68e1d4c4f0cd5cd7542697b1b230b84532f5 from qemu
The RISC-V ISA spec version 1.09.1 has been deprecated in QEMU since
4.1. It's not commonly used so let's remove support for it.
Backports commit 1a9540d1f1a9c5022d9273d0244e5809679dd33b from qemu
If the output of the move is dead, then the last use is in
the store. If we propagate the input to the store, then we
can remove the move opcode entirely.
Backports commit 61f15c487fc2aea14f6b0e52c459ae8b7d252a65 from qemu
For immediates, we must continue the special casing of 8-bit
elements. The other element sizes and shift types are trivially
implemented with shifts.
Backports commit 885b1706df6f0211a22e120fac910fb3abf3e733 from qemu
No host backend support yet, but the interfaces for rotls
are in place. Only implement left-rotate for now, as the
only known use of vector rotate by scalar is s390x, so any
right-rotate would be unused and untestable.
Backports commit 23850a74afb641102325b4b7f74071d929fc4594 from qemu
We do not reflect this expansion in tcg_can_emit_vecop_list,
so it is unused and unusable. However, we actually perform
the same expansion in do_gvec_shifts, so it is also unneeded.
Backports commit 3d5bb2ea5cc9ed54f65a6929a6e6baa01cabd98b from qemu
No host backend support yet, but the interfaces for rotlv
and rotrv are in place.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Drop the generic expansion from rot to shift; we can do better
for each backend, and then this code becomes unused.
Backports commit 5d0ceda902915e3f0e21c39d142c92c4e97c3ebb from qemu
No host backend support yet, but the interfaces for rotli
are in place. Canonicalize immediate rotate to the left,
based on a survey of architectures, but provide both left
and right shift interfaces to the translators.
Backports commit b0f7e7444c03da17e41bf327c8aea590104a28ab from qemu
Example provided in the launchpad bug fails with:
qemu: uncaught target signal 4 (Illegal instruction) - core dumped
Illegal instruction (core dumped)
It appears fetoxm1 is not implemented:
IN: expm1f
0x800005cc: fetoxm1x %fp2,%fp0
Disassembler disagrees with translator over instruction decoding
Please report this to qemu-devel@nongnu.org
(gdb) x/2hx 0x800005cc
0x800005cc: 0xf200 0x0808
This patch adds the instruction.
Backports commit 250b1da35d579f42319af234f36207902ca4baa4 from qemu
Traditionally, MIPS use 4KB page size, but Loongson prefer 16KB page
size in system emulator. So, let's define TARGET_PAGE_BITS_VARY and
TARGET_PAGE_BITS_MIN to support variable page size.
Backports commit ee3863b9d414f0b4a59a88f2a79b496a99d4f6dd from qemu
Using the MSR instruction to write to CPSR.E is deprecated, but it is
required to work from any mode including unprivileged code. We were
incorrectly forbidding usermode code from writing it because
CPSR_USER did not include the CPSR_E bit.
We use CPSR_USER in only three places:
* as the mask of what to allow userspace MSR to write to CPSR
* when deciding what bits a linux-user signal-return should be
able to write from the sigcontext structure
* in target_user_copy_regs() when we set up the initial
registers for the linux-user process
In the first two cases not being able to update CPSR.E is a bug, and
in the third case it doesn't matter because CPSR.E is always 0 there.
So we can fix both bugs by adding CPSR_E to CPSR_USER.
Because the cpsr_write() in restore_sigcontext() is now changing
a CPSR bit which is cached in hflags, we need to add an
arm_rebuild_hflags() call there; the callsite in
target_user_copy_regs() was already rebuilding hflags for other
reasons.
(The recommended way to change CPSR.E is to use the 'SETEND'
instruction, which we do correctly allow from usermode code.)
Backports commit 268b1b3dfbb92a9348406f728a33f39e3d8dcd8a from qemu
Do not explicitly store zero to the NEON high part
when we can pass !is_q to clear_vec_high.
Backports commit e1f778596ebfa8782276f4dd4651f2b285d734ff from qemu
The 8-byte store for the end a !is_q operation can be
merged with the other stores. Use a no-op vector move
to trigger the expand_clr portion of tcg_gen_gvec_mov.
Backports commit 5c27392dd08bd8534893abf25ef501f1bd8680fe from qemu
Replace the floatx80 compare specializations with inline functions
that call the standard floatx80_compare{,_quiet} functions.
Use bool as the return type.
Backports commit c6baf65000f826a713e8d9b5b35e617b0ca9ab5d from qemu
Replace the float128 compare specializations with inline functions
that call the standard float128_compare{,_quiet} functions.
Use bool as the return type.
Backports commit b7b1ac684fea49c6bfe1ad8b706aed7b09116d15 from qemu
Replace the float64 compare specializations with inline functions
that call the standard float64_compare{,_quiet} functions.
Use bool as the return type.
Backports commit 0673ecdf6cb2b1445a85283db8cbacb251c46516 from qemu
Replace the float32 compare specializations with inline functions
that call the standard float32_compare{,_quiet} functions.
Use bool as the return type.
Backports commit 5da2d2d8e53d80e92a61720ea995c86b33cbf25d from qemu
Give the previously unnamed enum a typedef name. Use it in the
prototypes of compare functions. Use it to hold the results
of the compare functions.
Backports commit 71bfd65c5fcd72f8af2735905415c7ce4220f6dc from qemu
Give the previously unnamed enum a typedef name. Use the packed
attribute so that we do not affect the layout of the float_status
struct. Use it in the prototypes of relevant functions.
Adjust switch statements as necessary to avoid compiler warnings.
Backports commit 3dede407cc61b64997f0c30f6dbf4df09949abc9 from qemu
Slightly tidies the usage within softfloat.c and the
representation in float_status.
Backports commit a828b373bdabc7e53d1e218e3fc76f85b6674688 from qemu
The existing f{32,64}_addsub_post test, which checks for zero
inputs, is identical to f{32,64}_mul_fast_test. Which means
we can eliminate the fast_test/fast_op hooks in favor of
reusing the same post hook.
This means we have one fewer test along the fast path for multiply.
Backports commit b240c9c497b9880ac0ba29465907d5ebecd48083 from qemu
The softfloat function floatx80_round_to_int incorrectly handles the
case of a pseudo-denormal where only the high bit of the significand
is set, ignoring that bit (treating the number as an exact zero)
rather than treating the number as an alternative representation of
+/- 2^-16382 (which may round to +/- 1 depending on the rounding mode)
as hardware does. Fix this check (simplifying the code in the
process).
Backports commit 9ecaf5ccec13ff2e8fe1e72f6e0f3367d2169c1c from qemu
The softfloat floatx80 comparisons fail to allow for pseudo-denormals,
which should compare equal to corresponding values with biased
exponent 1 rather than 0. Add an adjustment for that case when
comparing numbers with the same sign.
Backports commit be53fa785ab766d2722628403edee75b3e6ab599 from qemu
The softfloat function addFloatx80Sigs, used for addition of values
with the same sign and subtraction of values with opposite sign, fails
to handle the case where the two values both have biased exponent zero
and there is a carry resulting from adding the significands, which can
occur if one or both values are pseudo-denormals (biased exponent
zero, explicit integer bit 1). Add a check for that case, so making
the results match those seen on x86 hardware for pseudo-denormals.
Backports commit 41602807766e253ccb6fb761f3ff12767f786e2c from qemu
Conversions between IEEE floating-point formats should convert
signaling NaNs to quiet NaNs. Most of those in QEMU's softfloat code
do so, but those for floatx80 fail to. Fix those conversions to
silence signaling NaNs as well.
Backports commit 7537c2b4a363237534c96d089a02b0712b49d890 from qemu
Convert the Neon floating point VFMA and VFMS insn to decodetree.
These are the last insns in the 3-reg-same group so we can
remove all the support/loop code from the old decoder.
Backports commit e95485f85657be21135c17a9226e297c21e73360 from qemu
Convert the Neon fp VMAX/VMIN/VMAXNM/VMINNM/VRECPS/VRSQRTS 3-reg-same
insns to decodetree. (These are all the remaining non-accumulation
instructions in this group.)
Backports commit d5fdf9e9e1c6f2bbb0a4bcaafd85d344cce9c298 from qemu
The usual location for the env argument in the argument list of a TCG helper
is immediately after the return-value argument. recps_f32 and rsqrts_f32
differ in that they put it at the end.
Move the env argument to its usual place; this will allow us to
more easily use these helper functions with the gvec APIs.
Backports commit 26c6f695cfd2a3ccddb4d015a25b56f56aa62928 from qemu
Convert the Neon integer 3-reg-same compare insns VCGE, VCGT,
VCEQ, VACGE and VACGT to decodetree.
Backports commit 727ff1d63213e6666e511956903b9e97a339ec7e from qemu
Convert the Neon integer VMUL, VMLA, and VMLS 3-reg-same inssn to
decodetree.
We don't have a gvec helper for multiply-accumulate, so VMLA and VMLS
need a loop function do_3same_fp(). This takes a reads_vd parameter
to do_3same_fp() which tells it to load the old value into vd before
calling the callback function, in the same way that the do_vfp_3op_sp()
and do_vfp_3op_dp() functions in translate-vfp.inc.c work. (The
only uses in this patch pass reads_vd == true, but later commits
will use reads_vd == false.)
This conversion fixes in passing an underdecoding for VMUL
Backports commit 8aa71ead912ca0a9c0d29b74e0976f91952f950a from qemu
Convert the Neon float VPMIN, VPMAX and VPADD 3-reg-same insns to
decodetree. These are the only remaining 'pairwise' operations,
so we can delete the pairwise-specific bits of the old decoder's
for-each-element loop now.
Backports commit ab978335a56e3618212868fdce3a54217c6e71e6 from qemu
Convert the Neon VADD, VSUB, VABD 3-reg-same insns to decodetree.
We already have gvec helpers for addition and subtraction, but must
add one for fabd.
Backports commit a26a352bb498662cd0c205cb433a352f86fac7d2 from qemu
Convert the Neon VQDMULH and VQRDMULH 3-reg-same insns to
decodetree. These are the last integer operations in the
3-reg-same group.
Backports commit 7ecc28bc72b8033cf4e0c6332135ec20d4125dfb from qemu
Convert the Neon integer VPADD 3-reg-same insns to decodetree. These
are 'pairwise' operations. (Note that VQRDMLAH, which shares the
same primary opcode but has U=1, has already been converted.)
Backports commit fa22827d4eb078b6c58cd3d19af0b50ed951e832 from qemu
Convert the Neon integer VPMAX and VPMIN 3-reg-same insns to
decodetree. These are 'pairwise' operations.
Backports commit 059c2398a2b1ae86c6722c45e79fb0d0f4d95b1d from qemu
Convert the VQSHL, VRSHL and VQRSHL insns in the 3-reg-same
group to decodetree. We have already implemented the size==0b11
case of these insns; this commit handles the remaining sizes
Backports commit 6812dfdc6b0286730d6f903ebfbdc4f81b80c29b from qemu
Convert the Neon VRHADD and VHSUB 3-reg-same insns to decodetree.
(These are all the other insns in 3-reg-same which were using
GEN_NEON_INTEGER_OP() and which are not pairwise or
reversed-operands.)
Backports commit 8e44d03f4b5590e19a4f7910ca1c327609933dd7 from qemu
Convert the 64-bit element insns in the 3-reg-same group
to decodetree. This covers VQSHL, VRSHL and VQRSHL where
size==0b11.
Backports commit 35d4352fa9e94b35bf17f58181cb16c184b98d56 from qemu
Convert the Neon VQRDMLAH and VQRDMLSH insns in the 3-reg-same group
to decodetree. These don't use do_3same() because they want to
operate on VFP double registers, whose offsets are different from the
neon_reg_offset() calculations do_3same does.
Backports commit a063569508af8295cf6271e06700e5b956bb402d from qemu
