When we're using KVM, the kernel's internal idea of the MPIDR
affinity fields must match the values we tell it for the guest
vcpu cluster configuration in the device tree. Since at the moment
the kernel doesn't support letting userspace tell it the correct
affinity fields to use, we must read the kernel's view and
reflect that back in the device tree.
Backports commit eb5e1d3c85dffe677da2550d211f9304a7d5ba3b from qemu
According to ARMv8 ARM, there are additional aliases to MIDR system register in
AArch32 state. So add them to the list.
Backports commit ac00c79ff6635ae9fd732ff357ada0d05e795500 from qemu
According to ARM Cortex-A53/A57 TRM, REVIDR reset value should be zero. So let
REVIDR reset value be specified by CPU model and correct it for Cortex-A53/A57.
Backports commit 13b72b2b9aa7ab7ee129e38e9587acd6a1b9a932 from qemu
Since ARMv7 with LPAE support, a supersection short translation table
descriptor has had extended base address fields which hold bits 39:32 of
translated address. These fields are IMPDEF in ARMv6 and ARMv7 without
LPAE support.
Backports commit 4e42a6ca37e39e56725518851f4388e46bd91129 from qemu
The old ARMv5-style page table format includes a kind of second level
descriptor named the "extended small page" format, whose primary purpose
is to allow specification of the TEX memory attribute bits on a 4K page.
This exists on ARMv6 and also (as an implementation extension) on XScale
CPUs; it's UNPREDICTABLE on v5.
We were mishandling this in two ways:
(1) we weren't implementing it for v6 (probably never noticed because
Linux will use the new-style v6 page table format there)
(2) we were not correctly setting the page_size, which is 4K, not 1K
The latter bug went unnoticed for years because the only thing which
the page_size affects is which TLB entries get flushed when the guest
does a TLB invalidate on an address in the page, and prior to commit
2f0d8631b7 we were doing a full TLB flush very frequently due to Linux's
habit of writing the SCTLR pointlessly a lot.
(We can assume that after commit 2f0d8631b7 the bug went unnoticed
for a year because nobody's actually using the Zaurus/XScale emulation...)
Report the correct page size for these descriptors, and permit them
on ARMv6 CPUs. This fixes a problem where a kernel image for Zaurus
can boot the kernel OK but gets random segfaults when it tries to
run userspace programs.
Backports commit fc1891c74ae122a9dc7854f38bae7db03cd911e6 from qemu
The ARMCPRegInfo arrays v8_el3_no_el2_cp_reginfo and v8_el2_cp_reginfo
are actually used on non-v8 CPUs as well. Remove the incorrect v8_
prefix from their names.
Backports commit 4771cd01daaccb2a8929fa04c88c608e378cf814 from qemu
Adds CPTR_EL2/3 system registers definitions and access function.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
[PMM: merge CPTR_EL2 and HCPTR definitions into a single
def using STATE_BOTH;
don't use readfn/writefn to implement RAZ/WI registers;
don't use accessfn for the no-EL2 CPTR_EL2;
fix cpacr_access logic to catch EL2 accesses to CPACR being
trapped to EL3;
use new CP_ACCESS_TRAP_EL[23] rather than setting
exception.target_el directly]
Backports commit c6f191642a4027909813b4e6e288411f8371e951 from qemu
Updated the interrupt handling to utilize and report through the target EL
exception field. This includes consolidating and cleaning up code where
needed. Target EL is now calculated once in arm_cpu_exec_interrupt() and
do_interrupt was updated to use the target_el exception field. The
necessary code from arm_excp_target_el() was merged in where needed and the
function removed.
Backports commit 012a906b19e99b126403ff4a257617dab9b34163 from qemu
Move the code which sets exception information out of
arm_cpu_handle_mmu_fault and into tlb_fill. tlb_fill
is the only caller which wants to raise_exception()
so it makes more sense for it to handle the whole of
the exception setup.
As part of this cleanup, move the user-mode-only
implementation function for the handle_mmu_fault CPU
method into cpu.c so we don't need to make it globally
visible, and rename the softmmu-only utility function
arm_cpu_handle_mmu_fault to arm_tlb_fill so it's clear
that it's not the same thing.
Backports commit 8c6084bf10fe721929ca94cf16acd6687e61d3ec from qemu
Updated get_phys_addr_lpae to check the appropriate TTBCR/TCR depending on the
current EL. Support includes using the different TCR format as well as checks to
insure TTBR1 is not used when in EL2 or EL3.
Backports commit 88e8add8b6656c349a96b447b074688d02dc5415 from qemu
Add a utility function for choosing the correct TTBR system register based on
the specified MMU index. Add use of function on physical address lookup.
Backports commit aef878be4e7ab1bdb30b408007320400b0a29c83 from qemu
Updated scr_write to always allow updates to the SCR.SMD bit on ARMv8
regardless of whether virtualization (EL2) is enabled or not.
Backports commit 4eb276408363aef5435a72a8e818f24220b5edd0 from qemu
Add a transaction attribute indicating that a memory access is being
done from user-mode (unprivileged). This corresponds to an equivalent
signal in ARM AMBA buses.
Backports commit 0995bf8cd91b81ec9c1078e37b808794080dc5c0 from qemu
Factor out the page table walk memory accesses into their own function,
so that we can specify the correct S/NS memory attributes for them.
This will also provide a place to use the correct endianness and
handle the need for a stage-2 translation when virtualization is
supported.
Backports commit ebca90e4c3aaaae5ed1ee7c569dea00d5d6ed476 from qemu
Honour the NS bit in ARM page tables:
* when adding entries to the TLB, include the Secure/NonSecure
transaction attribute
* set the NS bit in the PAR when doing ATS operations
Note that we don't yet correctly use the NSTable bit to
cause the page table walk itself to use the right attributes.
Backports commit 8bf5b6a9c1911d2c8473385fc0cebfaaeef42dbc from qem
This patch makes the following changes to the determination of
whether an address is executable, when translating addresses
using LPAE.
1. No longer assumes that PL0 can't execute when it can't read.
It can in AArch64, a difference from AArch32.
2. Use va_size == 64 to determine we're in AArch64, rather than
arm_feature(env, ARM_FEATURE_V8), which is insufficient.
3. Add additional XN determinants
- NS && is_secure && (SCR & SCR_SIF)
- WXN && (prot & PAGE_WRITE)
- AArch64: (prot_PL0 & PAGE_WRITE)
- AArch32: UWXN && (prot_PL0 & PAGE_WRITE)
- XN determination should also work in secure mode (untested)
- XN may even work in EL2 (currently impossible to test)
4. Cleans up the bloated PAGE_EXEC condition - by removing it.
The helper get_S1prot is introduced. It may even work in EL2,
when support for that comes, but, as the function name implies,
it only works for stage 1 translations.
Backports commit d8e052b387635639a6ba4a09a7874fd2f113b218 from qemu
Introduce simple_ap_to_rw_prot(), which has the same behavior as
ap_to_rw_prot(), but takes the 2-bit simple AP[2:1] instead of
the 3-bit AP[2:0]. Use this in get_phys_addr_v6 when SCTLR_AFE
is set, as that bit indicates we should be using the simple AP
format.
It's unlikely this path is getting used. I don't see CR_AFE
getting used by Linux, so possibly not. If it had been, then
the check would have been wrong for all but AP[2:1] = 0b11.
Anyway, this should fix it up, in case it ever does get used.
Backports commit d76951b65dfb1be4e41cfae6abebf8db7a1243a3 from qemu
Instead of mixing access permission checking with access permissions
to page protection flags translation, just do the translation, and
leave it to the caller to check the protection flags against the access
type. Also rename to ap_to_rw_prot to better describe the new behavior.
Backports commit 0fbf5238203041f734c51b49778223686f14366b from qemu
The AArch64 SPSR_EL1 register is architecturally mandated to
be mapped to the AArch32 SPSR_svc register. This means its
state should live in QEMU's env->banked_spsr[1] field.
Correct the various places in the code that incorrectly
put it in banked_spsr[0].
Backports commit 7847f9ea9fce15a9ecfb62ab72c1e84ff516b0db from qemu
For the ARM M-profile cores, exception return pops various registers
including the PC from the stack. The architecture defines that if the
lowest bit in the new PC value is set (ie the PC is not halfword
aligned) then behaviour is UNPREDICTABLE. In practice hardware
implementations seem to simply ignore the low bit, and some buggy
RTOSes incorrectly rely on this. QEMU's behaviour was architecturally
permitted, but bringing QEMU into line with the hardware behaviour
allows more guest code to run. We log the situation as a guest error.
This was reported as LP:1428657.
Backports commit fcf83ab103dce6d2951f24f48e30820e7dbb3622 from qemu
Add AArch32 to AArch64 register sychronization functions.
Replace manual register synchronization with new functions in
aarch64_cpu_do_interrupt() and HELPER(exception_return)().
Backports commit ce02049dbf1828b4bc77d921b108a9d84246e5aa from qemu
f64 exponent in HELPER(recpe_f64) should be compared to 2045 rather than 1023
(FPRecipEstimate in ARMV8 spec). This fixes incorrect underflow handling when
flushing denormals to zero in the FRECPE instructions operating on 64-bit
values.
Backports commit fc1792e9aa36227ee9994757974f9397684e1a48 from qemu
A few of the oldest parts of the page-table-walk code have broken indent
(either hardcoded tabs or two-spaces). Reindent these sections.
For ease of review, this patch does not touch the brace style and
so is a whitespace-only change.
Backports commit 554b0b09aec4579c8164f363b18a263150e91a2c from qemu
Now we have the mmu_idx in get_phys_addr(), use it correctly to
determine the behaviour of virtual to physical address translations,
rather than using just an is_user flag and the current CPU state.
Some TODO comments have been added to indicate where changes will
need to be made to add EL2 and 64-bit EL3 support.
Backports commit 0480f69abf849ca0d48928cc6c669c1c7264239b from qemu
Make all the callers of get_phys_addr() pass it the correct
mmu_idx rather than just a simple "is_user" flag. This includes
properly decoding the AT/ATS system instructions; we include the
logic for handling all the opc1/opc2 cases because we'll need
them later for supporting EL2/EL3, even if we don't have the
regdef stanzas yet.
Backports commit d364970287c0ba68979711928c15e5d37414f87f from qemu
Instead of simply reusing ats_write() as the handler for both AArch32
and AArch64 address translation operations, use a different function
for each with the common code in a third function. This is necessary
because the semantics for selecting the right translation regime are
different; we are only getting away with sharing currently because
we don't support EL2 and only support EL3 in AArch32.
Backports commit 060e8a48cb84d41d4ac36e4bb29d9c14ed7168b6 from qemu
We currently claim that for ARM the mmu_idx should simply be the current
exception level. However this isn't actually correct -- secure EL0 and EL1
should have separate indexes from non-secure EL0 and EL1 since their
VA->PA mappings may differ. We also will want an index for stage 2
translations when we properly support EL2.
Define and document all seven mmu index values that we require, and
pass the mmu index in the TB flags rather than exception level or
priv/user bit.
This change doesn't update the get_phys_addr() code, so our page
table walking still assumes a simplistic "user or priv?" model for
the moment.
Backports commit c1e3781090b9d36c60e1a254ba297cb34011d3d4 from qemu
Add assertion checking when cpreg structures are registered that they
either forbid raw-access attempts or at least make an attempt at
handling them. Also add an assert in the raw-accessor-of-last-resort,
to avoid silently doing a read or write from offset zero, which is
actually AArch32 CPU register r0.
Backports commit 375421ccaeebae8212eb8f9a36835ad4d9dc60a8 from qemu
We currently mark ARM coprocessor/system register definitions with
the flag ARM_CP_NO_MIGRATE for two different reasons:
1) register is an alias on to state that's also visible via
some other register, and that other register is the one
responsible for migrating the state
2) register is not actually state at all (for instance the TLB
or cache maintenance operation "registers") and it makes no
sense to attempt to migrate it or otherwise access the raw state
This works fine for identifying which registers should be ignored
when performing migration, but we also use the same functions for
synchronizing system register state between QEMU and the kernel
when using KVM. In this case we don't want to try to sync state
into registers in category 2, but we do want to sync into registers
in category 1, because the kernel might have picked a different
one of the aliases as its choice for which one to expose for
migration. (In particular, on 32 bit hosts the kernel will
expose the state in the AArch32 version of the register, but
TCG's convention is to mark the AArch64 version as the version
to migrate, even if the CPU being emulated happens to be 32 bit,
so almost all system registers will hit this issue now that we've
added AArch64 system emulation.)
Fix this by splitting the NO_MIGRATE flag in two (ALIAS and NO_RAW)
corresponding to the two different reasons we might not want to
migrate a register. When setting up the TCG list of registers to
migrate we honour both flags; when populating the list from KVM,
only ignore registers which are NO_RAW.
Backports commit 7a0e58fa648736a75f2a6943afd2ab08ea15b8e0 from qemu
Added RVBAR_EL2 and RVBAR_EL3 CP register support. All RVBAR_EL# registers
point to the same location and only the highest EL version exists at any one
time.
Backports commit be8e8128595b41b9f609c1507e67d121e65e7173 from qemu
Merge of the v8_el2_cp_reginfo and el3_cp_reginfo ARMCPRegInfo lists.
Previously, some EL3 registers were restricted to the ARMv8 list under the
impression that they were not needed on ARMv7. However, this is not the case
as the ARMv7/32-bit variants rely on the ARMv8/64-bit variants to handle
migration and reset. For this reason they must always exist.
Backports commit 60fb1a87b47b14e4ea67043aa56f353e77fbd70a from qemu
When EL3 is running in AArch32 (or ARMv7 with Security Extensions)
FCSEIDR, CONTEXTIDR, TPIDRURW, TPIDRURO and TPIDRPRW have a secure
and a non-secure instance.
Backports commit 54bf36ed351c526cde0c853079f9ff1ab7e2ff89 from qemu
When EL3 is running in Aarch32 (or ARMv7 with Security Extensions)
VBAR has a secure and a non-secure instance, which are mapped to
VBAR_EL1 and VBAR_EL3.
Backports commit fb6c91ba2bb0b1c1b8662ceeeeb9474a025f9a6b from qemu
