Fix the decoding of iss_sf in disas_ld_lit.
The SF (Sixty-Four) field in the ISS (Instruction Specific Syndrome)
is a bit that specifies the width of the register that the
instruction loads to.
If cleared it specifies 32 bits.
If set it specifies 64 bits.
Backports commit 173ff58580b383a7841b18fddb293038c9d40d1c from qemu
Instead of using -1 as end of chain, use 0, and link through the 0
entry as a fully circular double-linked list.
Backports commit dcb8e75870e2de199db853697f8839cb603beefe from qemu
Add support for generating the ISS (Instruction Specific Syndrome) for
Data Abort exceptions taken from AArch64.
These syndromes are used by hypervisors for example to trap and emulate
memory accesses.
We save the decoded data out-of-band with the TBs at translation time.
When exceptions hit, the extra data attached to the TB is used to
recreate the state needed to encode instruction syndromes.
This avoids the need to emit moves with every load/store.
Based on a suggestion from Peter Maydell.
Backports commit aaa1f954d4cab243e3d5337a72bc6d104e1c4808 from qemu
exec-all.h contains TCG-specific definitions. It is not needed outside
TCG-specific files such as translate.c, exec.c or *helper.c.
One generic function had snuck into include/exec/exec-all.h; move it to
include/qom/cpu.h.
Backports commit 63c915526d6a54a95919ebece83fa9ca631b2508 from qemu
In user mode, there's only a static address translation, TBs are always
invalidated properly and direct jumps are reset when mapping change.
Thus the destination address is always valid for direct jumps and
there's no need to restrict it to the pages the TB resides in.
Backports commit 90aa39a1cc4837360889f0e033ca25cc82100308 from qemu
The various load/store variants under disas_ldst_reg can all reuse the
same decoding for opc, size, rt and is_vector.
This patch unifies the decoding in preparation for generating
instruction syndromes for data aborts.
This will allow us to reduce the number of places to hook in updates
to the load/store state needed to generate the insn syndromes.
No functional change.
Backports commit cd694521ca061a5d0436d5df4ec8c17c8f4dfcdb from qemu
Use extract32 instead of open coding the bit masking when decoding
is_signed and is_extended. This streamlines the decoding with some
of the other ldst variants.
No functional change.
Backports commit 026a19c3128678d4fe301fc36e8ffacdc9ecccb8 from qemu
Introduce a tbflags for endianness, set based upon the CPUs current
endianness. This in turn propagates through to the disas endianness
flag.
Backports commit 91cca2cda9823b1e7a049cb308a05104b5076cba from qemu
Introduce a disas flag for setting the CPU data endianness. This allows
control of the endianness from the CPU state rather than hard-coding it
to TARGET_WORDS_BIGENDIAN.
Backports commit dacf0a2ff7d39ab12bd90f2f5496a3889facd54a from qemu
bswap_code is a CPU property of sorts ("is the iside endianness the
opposite way round to TARGET_WORDS_BIGENDIAN?") but it is not the
actual CPU state involved here which is SCTLR.B (set for BE32
binaries, clear for BE8).
Replace bswap_code with SCTLR.B, and pass that to arm_ld*_code.
The next patches will make data fetches honor both SCTLR.B and
CPSR.E appropriately.
Backports commit f9fd40ebe4f55e0048e002925b8d65e66d56e7a7 from qemu
System registers might have access requirements which need to
be described via a CPAccessFn and which differ for reads and
writes. For this to be possible we need to pass the access
function a parameter to tell it whether the access being checked
is a read or a write.
Backports commit 3f208fd76bcc91a8506681bb8472f2398fe6f487 from qemu
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Backports commit 74c21bd07491739c6e56bcb1f962e4df730e77f3 from qemu
If this CPU supports EL3, enhance the printing of the current
CPU mode in debug logging to distinguish S from NS modes as
appropriate.
Backports commit 06e5cf7acd1f94ab7c1cd6945974a1f039672940 from qemu
The AArch64 debug CPU display of PSTATE as "PSTATE=200003c5 (flags --C-)"
on the end of the same line as the last of the general purpose registers
is unnecessarily different from the AArch32 display of PSR as
"PSR=200001d3 --C- A svc32" on its own line. Update the AArch64
code to put PSTATE in its own line and in the same format, including
printing the exception level (mode).
Backports commit 08b8e0f527930208a548b424d2ab3103bf3c8c02 from qemu
Some targets already had this within their logic, but make sure
it's present for all targets.
Backports commit 522a0d4e3c0d397ffb45ec400d8cbd426dad9d17 from qemu
Reduce the boilerplate required for each target. At the same time,
move the test for breakpoint after calling tcg_gen_insn_start.
Note that arm and aarch64 do not use cpu_breakpoint_test, but still
move the inline test down after tcg_gen_insn_start.
Backports commit b933066ae03d924a92b2616b4a24e7d91cd5b841 from qemu
A QEMU breakpoint match is not definitely an architectural breakpoint
match. If an exception is generated unconditionally during translation,
it is hardly possible to ignore it in the debug exception handler.
Generate a call to a helper to check CPU breakpoints and raise an
exception only if any breakpoint matches architecturally.
Backports commit 5d98bf8f38c17a348ab6e8af196088cd4953acd0 from qemu
If any store instruction writes the code inside the same TB
after this store insn, the execution of the TB must be stopped
to execute new code correctly.
As described in ARMv8 manual D3.4.6 self-modifying code must do an
IC invalidation to be valid, and an ISB after it. So it's enough to end
the TB after ISB instruction on the code translation.
Also this TB break is necessary to take any pending interrupts immediately
after an ISB (as required by ARMv8 ARM D1.14.4).
Backports commit 6df99dec9e81838423d723996e96236693fa31fe from qemu
It is no longer used, so tidy up everything reached by it.
This includes the gen_opc_* arrays, the search_pc parameter
and the inline gen_intermediate_code_internal functions.
Backports commit 4e5e1215156662b2b153255c49d4640d82c5568b from qemu
If EL3 is not supported in current configuration,
we should not try to get EL3 bitness.
Backports commit cef9ee706792b1e205fe472b67053a0e82cd058e from qemu
For the A64 instruction set, the semihosting call instruction
is 'HLT 0xf000'. Wire this up to call do_arm_semihosting()
if semihosting is enabled.
Backports commit 8012c84ff92a36d05dfe61af9b24dd01a7ea25e4 from qemu
Currently we use DISAS_WFE for both WFE and YIELD instructions.
This is functionally correct because at the moment both of them
are implemented as "yield this CPU back to the top level loop so
another CPU has a chance to run". However it's rather confusing
that YIELD ends up calling HELPER(wfe), and if we ever want to
implement real behaviour for WFE and SEV it's likely to trip us up.
Split out the yield codepath to use DISAS_YIELD and a new
HELPER(yield) function, and have HELPER(wfe) call HELPER(yield).
Backports commit 049e24a191c212d9468db84169197887f2c91586 from qemu
Just NOP the WFI instruction if we have work to do.
This doesn't make much difference currently (though it does avoid
jumping out to the top level loop and immediately restarting),
but the distinction between "halt" and "don't halt" will become
more important when the decision to halt requires us to trap
to a higher exception level instead.
Backport commit 84549b6dcf9147559ec08b066de673587be6b763 from qemu
Extend the ARM disassemble context to take a target exception EL instead of a
boolean enable. This change reverses the polarity of the check making a value
of 0 indicate floating point enabled (no exception).
Backports commit 9dbbc748d671c70599101836cd1c2719d92f3017 from qemu
Currently we keep the TB flags PSTATE_SS and SS_ACTIVE in different
bit positions for AArch64 and AArch32. Replace these separate
definitions with a single common flag in the upper part of the
flags word.
Backports commit 3cf6a0fcedd429693d439556543400d5f0e31e1d from qemu
Add a CPU state exception target EL field that will be used for communicating
the EL to which an exception should be routed.
Add a disassembly context field for tracking the EL3 architecture needed for
determining the target exception EL.
Add a target EL argument to the generic exception helper for callers to specify
the EL to which the exception should be routed. Extended the helper to set
the newly added CPU state exception target el.
Added a function for setting the target exception EL and updated calls to helpers
to call it.
Backports commit 737103619869600668cc7e8700e4f6eab3943896 from qemu
Avoid shifting potentially negative signed offset values in
disas_ldst_pair() by keeping the offset in a uint64_t rather
than an int64_t.
Backports commit c2ebd862a54b7e12175d65c03ba259926cb2237a from qemu
Shifting a negative integer left is undefined behaviour in C.
Avoid it by assembling and shifting the offset fields as
unsigned values and then sign extending as the final action.
Backports commit 037e1d009e2fcb80784d37f0e12aa999787d46d4 from qemu
The code in logic_imm_decode_wmask attempts to rotate a mask
value within the bottom 'e' bits of the value with
mask = (mask >> r) | (mask << (e - r));
This has two issues:
* if the element size is 64 then a rotate by zero results
in a shift left by 64, which is undefined behaviour
* if the element size is smaller than 64 then this will
leave junk in the value at bit 'e' and above, which is
not valid input to bitfield_replicate(). As it happens,
the bits at bit 'e' to '2e - r' are exactly the ones
which bitfield_replicate is going to copy in there,
so this isn't a "wrong code generated" bug, but it's
confusing and if we ever put an assert in
bitfield_replicate it would fire on valid guest code.
Fix the former by not doing anything if r is zero, and
the latter by masking with bitmask64(e).
Backports commit e167adc9d9f5df4f8109aecd4552c407fdce094a from qemu
Fix attempts to shift into the sign bit of an int, which is undefined
behaviour in C and warned about by the clang sanitizer.
Backports commit 1743d55c8b38bcee632cf6eb2de81131635bb3d2 from qemu
The MMU index to use for unprivileged loads and stores is more
complicated than we currently implement:
* for A64, it should be "if at EL1, access as if EL0; otherwise
access at current EL"
* for A32/T32, it should be "if EL2, UNPREDICTABLE; otherwise
access as if at EL0".
In both cases, if we want to make the access for Secure EL0
this is not the same mmu_idx as for Non-Secure EL0.
Backports commit 579d21cce63f3dd2f6ee49c0b02a14e92cb4a836 from qemu
We currently claim that for ARM the mmu_idx should simply be the current
exception level. However this isn't actually correct -- secure EL0 and EL1
should have separate indexes from non-secure EL0 and EL1 since their
VA->PA mappings may differ. We also will want an index for stage 2
translations when we properly support EL2.
Define and document all seven mmu index values that we require, and
pass the mmu index in the TB flags rather than exception level or
priv/user bit.
This change doesn't update the get_phys_addr() code, so our page
table walking still assumes a simplistic "user or priv?" model for
the moment.
Backports commit c1e3781090b9d36c60e1a254ba297cb34011d3d4 from qemu
While we're at it, emit the opcode adjacent to where we currently
record data for search_pc. This puts gen_io_start et al on the
"correct" side of the marker.
Backports commit 667b8e29c5b1d8c5b4e6ad5f780ca60914eb6e96 from qemu
Usually, eliminate an operation from the translator by combining
a shift with an extract.
In the case of gen_set_NZ64, we don't need a boolean value for cpu_ZF,
merely a non-zero value. Given that we can extract both halves of a
64-bit input in one call, this simplifies the code.
Backports commit 7cb36e18b2f1c1f971ebdc2121de22a8c2e94fd6 from qemu
For !SF, this initial ext32u can't be optimized away by the
current TCG code generator. (It would require backward bit
liveness propagation.)
Backports commit d3a77b42decd0cbfa62a5526e67d1d6d380c83a9 from qemu
This can allow much of a ccmp to be elided when particular
flags are subsequently dead.
Backports commit 7dd03d773e0dafae9271318fc8d6b2b14de74403 from qemu
This is improved type checking for the translators -- it's no longer
possible to accidentally swap arguments to the branch functions.
Note that the code generating backends still manipulate labels as int.
With notable exceptions, the scope of the change is just a few lines
for each target, so it's not worth building extra machinery to do this
change in per-target increments.
Backports commit 42a268c241183877192c376d03bd9b6d527407c7 from qemu
