Convert the VQSHLU and QVSHL 2-reg-shift insns to decodetree.
These are the last of the simple shift-by-immediate insns.
Backports commit 37bfce81b10450071193c8495a07f182ec652e2a from qemu
Convert the VSHR 2-reg-shift insns to decodetree.
Note that unlike the legacy decoder, we present the right shift
amount to the trans_ function as a positive integer.
Backports commit 66432d6b8294e3508218b360acfdf7c244eea993 from qemu
Convert the VSHL and VSLI insns from the Neon 2-registers-and-a-shift
group to decodetree.
Backports commit d3c8c736f8b4bdd02831076286b1788232f46ced from qemu
Rather than passing an opcode to a helper, fully decode the
operation at translate time. Use clear_tail_16 to zap the
balance of the SVE register with the AdvSIMD write.
Backports commit 43fa36c96c24349145497adc1b451f9caf74e344 from qemu
Rather than passing an opcode to a helper, fully decode the
operation at translate time. Use clear_tail_16 to zap the
balance of the SVE register with the AdvSIMD write.
Backports commit afc8b7d32668547308bdd654a63cf5228936e0ba from qemu
Do not yet convert the helpers to loop over opr_sz, but the
descriptor allows the vector tail to be cleared. Which fixes
an existing bug vs SVE.
Backports commit effa992f153f5e7ab97ab843b565690748c5b402 from qemu
Do not yet convert the helpers to loop over opr_sz, but the
descriptor allows the vector tail to be cleared. Which fixes
an existing bug vs SVE.
Backports commit aaffebd6d3135b8aed7e61932af53b004d261579 from qemu
With this conversion, we will be able to use the same helpers
with sve. This also fixes a bug in which we failed to clear
the high bits of the SVE register after an AdvSIMD operation.
Backports commit 1738860d7e60dec5dbeba17f8b44d31aae3accac from qemu
With this conversion, we will be able to use the same helpers
with sve. In particular, pass 3 vector parameters for the
3-operand operations; for advsimd the destination register
is also an input.
This also fixes a bug in which we failed to clear the high bits
of the SVE register after an AdvSIMD operation.
Backports commit a04b68e1d4c4f0cd5cd7542697b1b230b84532f5 from qemu
Using the MSR instruction to write to CPSR.E is deprecated, but it is
required to work from any mode including unprivileged code. We were
incorrectly forbidding usermode code from writing it because
CPSR_USER did not include the CPSR_E bit.
We use CPSR_USER in only three places:
* as the mask of what to allow userspace MSR to write to CPSR
* when deciding what bits a linux-user signal-return should be
able to write from the sigcontext structure
* in target_user_copy_regs() when we set up the initial
registers for the linux-user process
In the first two cases not being able to update CPSR.E is a bug, and
in the third case it doesn't matter because CPSR.E is always 0 there.
So we can fix both bugs by adding CPSR_E to CPSR_USER.
Because the cpsr_write() in restore_sigcontext() is now changing
a CPSR bit which is cached in hflags, we need to add an
arm_rebuild_hflags() call there; the callsite in
target_user_copy_regs() was already rebuilding hflags for other
reasons.
(The recommended way to change CPSR.E is to use the 'SETEND'
instruction, which we do correctly allow from usermode code.)
Backports commit 268b1b3dfbb92a9348406f728a33f39e3d8dcd8a from qemu
Do not explicitly store zero to the NEON high part
when we can pass !is_q to clear_vec_high.
Backports commit e1f778596ebfa8782276f4dd4651f2b285d734ff from qemu
The 8-byte store for the end a !is_q operation can be
merged with the other stores. Use a no-op vector move
to trigger the expand_clr portion of tcg_gen_gvec_mov.
Backports commit 5c27392dd08bd8534893abf25ef501f1bd8680fe from qemu
Give the previously unnamed enum a typedef name. Use it in the
prototypes of compare functions. Use it to hold the results
of the compare functions.
Backports commit 71bfd65c5fcd72f8af2735905415c7ce4220f6dc from qemu
Give the previously unnamed enum a typedef name. Use the packed
attribute so that we do not affect the layout of the float_status
struct. Use it in the prototypes of relevant functions.
Adjust switch statements as necessary to avoid compiler warnings.
Backports commit 3dede407cc61b64997f0c30f6dbf4df09949abc9 from qemu
The existing f{32,64}_addsub_post test, which checks for zero
inputs, is identical to f{32,64}_mul_fast_test. Which means
we can eliminate the fast_test/fast_op hooks in favor of
reusing the same post hook.
This means we have one fewer test along the fast path for multiply.
Backports commit b240c9c497b9880ac0ba29465907d5ebecd48083 from qemu
Convert the Neon floating point VFMA and VFMS insn to decodetree.
These are the last insns in the 3-reg-same group so we can
remove all the support/loop code from the old decoder.
Backports commit e95485f85657be21135c17a9226e297c21e73360 from qemu
Convert the Neon fp VMAX/VMIN/VMAXNM/VMINNM/VRECPS/VRSQRTS 3-reg-same
insns to decodetree. (These are all the remaining non-accumulation
instructions in this group.)
Backports commit d5fdf9e9e1c6f2bbb0a4bcaafd85d344cce9c298 from qemu
The usual location for the env argument in the argument list of a TCG helper
is immediately after the return-value argument. recps_f32 and rsqrts_f32
differ in that they put it at the end.
Move the env argument to its usual place; this will allow us to
more easily use these helper functions with the gvec APIs.
Backports commit 26c6f695cfd2a3ccddb4d015a25b56f56aa62928 from qemu
Convert the Neon integer 3-reg-same compare insns VCGE, VCGT,
VCEQ, VACGE and VACGT to decodetree.
Backports commit 727ff1d63213e6666e511956903b9e97a339ec7e from qemu
Convert the Neon integer VMUL, VMLA, and VMLS 3-reg-same inssn to
decodetree.
We don't have a gvec helper for multiply-accumulate, so VMLA and VMLS
need a loop function do_3same_fp(). This takes a reads_vd parameter
to do_3same_fp() which tells it to load the old value into vd before
calling the callback function, in the same way that the do_vfp_3op_sp()
and do_vfp_3op_dp() functions in translate-vfp.inc.c work. (The
only uses in this patch pass reads_vd == true, but later commits
will use reads_vd == false.)
This conversion fixes in passing an underdecoding for VMUL
Backports commit 8aa71ead912ca0a9c0d29b74e0976f91952f950a from qemu
Convert the Neon float VPMIN, VPMAX and VPADD 3-reg-same insns to
decodetree. These are the only remaining 'pairwise' operations,
so we can delete the pairwise-specific bits of the old decoder's
for-each-element loop now.
Backports commit ab978335a56e3618212868fdce3a54217c6e71e6 from qemu
Convert the Neon VADD, VSUB, VABD 3-reg-same insns to decodetree.
We already have gvec helpers for addition and subtraction, but must
add one for fabd.
Backports commit a26a352bb498662cd0c205cb433a352f86fac7d2 from qemu
Convert the Neon VQDMULH and VQRDMULH 3-reg-same insns to
decodetree. These are the last integer operations in the
3-reg-same group.
Backports commit 7ecc28bc72b8033cf4e0c6332135ec20d4125dfb from qemu
Convert the Neon integer VPADD 3-reg-same insns to decodetree. These
are 'pairwise' operations. (Note that VQRDMLAH, which shares the
same primary opcode but has U=1, has already been converted.)
Backports commit fa22827d4eb078b6c58cd3d19af0b50ed951e832 from qemu
Convert the Neon integer VPMAX and VPMIN 3-reg-same insns to
decodetree. These are 'pairwise' operations.
Backports commit 059c2398a2b1ae86c6722c45e79fb0d0f4d95b1d from qemu
Convert the VQSHL, VRSHL and VQRSHL insns in the 3-reg-same
group to decodetree. We have already implemented the size==0b11
case of these insns; this commit handles the remaining sizes
Backports commit 6812dfdc6b0286730d6f903ebfbdc4f81b80c29b from qemu
Convert the Neon VRHADD and VHSUB 3-reg-same insns to decodetree.
(These are all the other insns in 3-reg-same which were using
GEN_NEON_INTEGER_OP() and which are not pairwise or
reversed-operands.)
Backports commit 8e44d03f4b5590e19a4f7910ca1c327609933dd7 from qemu
Convert the 64-bit element insns in the 3-reg-same group
to decodetree. This covers VQSHL, VRSHL and VQRSHL where
size==0b11.
Backports commit 35d4352fa9e94b35bf17f58181cb16c184b98d56 from qemu
Convert the Neon VQRDMLAH and VQRDMLSH insns in the 3-reg-same group
to decodetree. These don't use do_3same() because they want to
operate on VFP double registers, whose offsets are different from the
neon_reg_offset() calculations do_3same does.
Backports commit a063569508af8295cf6271e06700e5b956bb402d from qemu
Pass a pointer directly to env->vfp.qc[0], rather than env.
This will allow SVE2, which does not modify QC, to pass a
pointer to dummy storage.
Change the return type of inl_qrdml.h_s16 to match the
sense of the operation: signed.
Backports commit e286bf4a72fe3a60490b8d6e3f28d6335677e08c from qemu
Provide a functional interface for the vector expansion.
This fits better with the existing set of helpers that
we provide for other operations.
Backports commit 146aa66ce58b686b8037d0eb3921c1125942dbde from qemu
Provide a functional interface for the vector expansion.
This fits better with the existing set of helpers that
we provide for other operations.
Backports commit c7715b6b51a6f7a5412c5fcb40a4c8586105e597 from qemu
Provide a functional interface for the vector expansion.
This fits better with the existing set of helpers that
we provide for other operations.
Backports commit 8161b75357095fef54c76b1a6ed1e54d0e8655e0 from qemu
Rather than perform the argument swap during code generation,
perform it during decode. This means it doesn't have to be
special cased later, and we can share code with aarch64 code
generation. Hopefully the decode comment addresses any confusion
that might arise in between.
Backports commit e9eee5316ffec5f37643de806b2e5577c5c189cf from qemu
Provide a functional interface for the vector expansion.
This fits better with the existing set of helpers that
we provide for other operations.
Backports commit 271063206a46062a45fc6bab8dabe45f0b88159d from qemu
Provide a functional interface for the vector expansion.
This fits better with the existing set of helpers that
we provide for other operations.
Macro-ize the 5 nearly identical comparisons.
Backports commit 69d5e2bf8c3cefedbfa1c1670137e636dbd7faa5 from qemu
Now that we've converted all cases to gvec, there is quite a bit
of dead code at the end of the function. Remove it.
Sink the call to gen_gvec_fn2i to the end, loading a function
pointer within the switch statement.
Backports commit 3f08f0bce841e7857ec98ce7909629d0c335005e from qemu
In 1dc8425e551, while converting to gvec, I added an extra range check
against the shift count. This was unnecessary because the encoding of
the shift count produces 0 to the element size - 1.
Backports commit 2f27c5244db300387f15d9ffa5067a204ffd625d from qemu
The functions eliminate duplication of the special cases for
this operation. They match up with the GVecGen2iFn typedef.
Add out-of-line helpers. We got away with only having inline
expanders because the neon vector size is only 16 bytes, and
we know that the inline expansion will always succeed.
When we reuse this for SVE, tcg-gvec-op may decide to use an
out-of-line helper due to longer vector lengths.
Backports commit 893ab0542aa385a287cbe46d5535c8b9e95ce699 from qemu
Create vectorized versions of handle_shri_with_rndacc
for shift+round and shift+round+accumulate. Add out-of-line
helpers in preparation for longer vector lengths from SVE.
Backports commit 6ccd48d4ea244c1c46a24dfa50bfb547f11422dd from qemu
The functions eliminate duplication of the special cases for
this operation. They match up with the GVecGen2iFn typedef.
Add out-of-line helpers. We got away with only having inline
expanders because the neon vector size is only 16 bytes, and
we know that the inline expansion will always succeed.
When we reuse this for SVE, tcg-gvec-op may decide to use an
out-of-line helper due to longer vector lengths.
Backports commit 631e565450c483e0622eec3d8b61d7fa41d16bca from qemu
