Intel IceLake cpu has added new cpu features,AVX512_VBMI2/GFNI/
VAES/VPCLMULQDQ/AVX512_VNNI/AVX512_BITALG. Those new cpu features
need expose to guest VM.
The bit definition:
CPUID.(EAX=7,ECX=0):ECX[bit 06] AVX512_VBMI2
CPUID.(EAX=7,ECX=0):ECX[bit 08] GFNI
CPUID.(EAX=7,ECX=0):ECX[bit 09] VAES
CPUID.(EAX=7,ECX=0):ECX[bit 10] VPCLMULQDQ
CPUID.(EAX=7,ECX=0):ECX[bit 11] AVX512_VNNI
CPUID.(EAX=7,ECX=0):ECX[bit 12] AVX512_BITALG
The release document ref below link:
https://software.intel.com/sites/default/files/managed/c5/15/\
architecture-instruction-set-extensions-programming-reference.pdf
Backports commit aff9e6e46a343e1404498be4edd03db1112f0950 from qemu
For some systems (i.e. FreeBSD) the default 'make' is not compatible with the
GNU extensions used by QEMU makefiles.
Calling the GNU make (gmake) works, however the help displayed refers to the
host 'make' and copy/paste leads to lot of unobvious errors:
$ gmake check-help
[...]
make check Run all tests
$ make check
make: "Makefile" line 28: Missing dependency operator
make: "Makefile" line 37: Need an operator
make: "Makefile" line 41: warning: duplicate script for target "git-submodule-update" ignored
make: "rules.mak" line 70: warning: duplicate script for target "%.o" ignored
make: Unknown modifier ' '
make: Unclosed substitution for eval modules (= missing)
make: "tests/Makefile.include" line 24: Variable/Value missing from "export"
make: "tests/" line 1: warning: Zero byte read from file, skipping rest of line.
make: "tests/" line 1: Need an operator
make: "Makefile" line 660: warning: duplicate script for target "ifneq" ignored
make: "Makefile" line 78: warning: using previous script for "ifneq" defined here
make: Fatal errors encountered -- cannot continue
Using the $(MAKE) variable, the help displayed is consistent with the 'make'
program used.
Backports commit b98a3bae2596fd9bf60f140d042c8e993daba930 from qemu
This was never used since its introduction in commit
196ea13104f8 ("memory: Add global-locking property to memory
regions").
Backports commit e2fbe20851ceec5ccd7b539a89db0420393fb85d from qemu
SPARC Linux has an oddity that it insists that mmap()
of MAP_FIXED memory must be at an alignment defined by
SHMLBA, which is more aligned than the page size
(typically, SHMLBA alignment is to 16K, and pages are 8K).
This is a relic of ancient hardware that had cache
aliasing constraints, but even on modern hardware the
kernel still insists on the alignment.
To ensure that we get mmap() alignment sufficient to
make the kernel happy, change QEMU_VMALLOC_ALIGN,
qemu_fd_getpagesize() and qemu_mempath_getpagesize()
to use the maximum of getpagesize() and SHMLBA.
In particular, this allows 'make check' to pass on Sparc:
we were previously failing the ivshmem tests.
Backports commit 57d1f6d7ce23e79a8ebe4a57bd2363b269b4664b from qemu
Now that do_ats_write() is entirely in control of whether to
generate a 32-bit PAR or a 64-bit PAR, we can make it use the
correct (complicated) condition for doing so.
Backports commit 1313e2d7e2cd8b21741e0cf542eb09dfc4188f79 from qemu
All of the callers of get_phys_addr() and arm_tlb_fill() now ignore
the FSR values they return, so we can just remove the argument
entirely.
Backports commit bc52bfeb3be2052942b7dac8ba284f342ac9605b from qemu
In do_ats_write(), rather than using the FSR value from get_phys_addr(),
construct the PAR values using the information in the ARMMMUFaultInfo
struct. This allows us to create a PAR of the correct format regardless
of what the translation table format is.
For the moment we leave the condition for "when should this be a
64 bit PAR" as it was previously; this will need to be fixed to
properly support AArch32 Hyp mode.
Backports commit 5efe9ed45dec775ebe91ce72bd805ee780d16064 from qemu
Now that ARMMMUFaultInfo is guaranteed to have enough information
to construct a fault status code, we can pass it in to the
deliver_fault() function and let it generate the correct type
of FSR for the destination, rather than relying on the value
provided by get_phys_addr().
I don't think there are any cases the old code was getting
wrong, but this is more obviously correct.
Backports commit 681f9a89d201d7891e2c60dff5e5415d8f618518 from qemu
Make get_phys_addr_pmsav8() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Backports commit 3f551b5b7380ff131fe22944aa6f5b166aa13caf from qemu
Make get_phys_addr_pmsav7() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Backports commit 9375ad15338b24e06109071ac3a85df48a2cc2e6 from qemu
Make get_phys_addr_pmsav5() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Note that PMSAv5 does not define any guest-visible fault status
register, so the different "fsr" values we were previously
returning are entirely arbitrary. So we can just switch to using
the most appropriae fi->type values without worrying that we
need to special-case FaultInfo->FSC conversion for PMSAv5.
Backports commit 53a4e5c5b07b2f50c538511b74b0d3d4964695ea from qemu
Make get_phys_addr_v6() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Backports commit da909b2c23a68e57bbcb6be98229e40df606f0c8 from qemu
Make get_phys_addr_v6() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Backports commit f06cf243945ccb24cb9578304306ae7fcb4cf3fd from qemu
Make get_phys_addr_v5() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Backports commit f989983e8dc9be6bc3468c6dbe46fcb1501a740c from qemu
All the callers of arm_ldq_ptw() and arm_ldl_ptw() ignore the value
that those functions store in the fsr argument on failure: if they
return failure to their callers they will always overwrite the fsr
value with something else.
Remove the argument from these functions and S1_ptw_translate().
This will simplify removing fsr from the calling functions.
Backports commit 3795a6de9f7ec4a7e3dcb8bf02a88a014147b0b0 from qemu
Currently get_phys_addr() and its various subfunctions return
a hard-coded fault status register value for translation
failures. This is awkward because FSR values these days may
be either long-descriptor format or short-descriptor format.
Worse, the right FSR type to use doesn't depend only on the
translation table being walked -- some cases, like fault
info reported to AArch32 EL2 for some kinds of ATS operation,
must be in long-descriptor format even if the translation
table being walked was short format. We can't get those cases
right with our current approach.
Provide fields in the ARMMMUFaultInfo struct which allow
get_phys_addr() to provide sufficient information for a caller to
construct an FSR value themselves, and utility functions which do
this for both long and short format FSR values, as a first step in
switching get_phys_addr() and its children to only returning the
failure cause in the ARMMMUFaultInfo struct.
Backports commit 1fa498fe0de979030bd1f481046e9f1c5574a584 from qemu
Implement the TT instruction which queries the security
state and access permissions of a memory location.
Backports commit 5158de241b0fb344a6c948dfcbc4e611ab5fafbe from qemu
For the TT instruction we're going to need to do an MPU lookup that
also tells us which MPU region the access hit. This requires us
to do the MPU lookup without first doing the SAU security access
check, so pull the MPU lookup parts of get_phys_addr_pmsav8()
out into their own function.
The TT instruction also needs to know the MPU region number which
the lookup hit, so provide this information to the caller of the
MPU lookup code, even though get_phys_addr_pmsav8() doesn't
need to know it.
Backports commit 54317c0ff3a3c0f6b2c3a1d3c8b5d93686a86d24 from qemu
The TT instruction is going to need to look up the MMU index
for a specified security and privilege state. Refactor the
existing arm_v7m_mmu_idx_for_secstate() into a version that
lets you specify the privilege state and one that uses the
current state of the CPU.
Backports commit ec8e3340286a87d3924c223d60ba5c994549f796 from qemu
For M profile, we currently have an mmu index MNegPri for
"requested execution priority negative". This fails to
distinguish "requested execution priority negative, privileged"
from "requested execution priority negative, usermode", but
the two can return different results for MPU lookups. Fix this
by splitting MNegPri into MNegPriPriv and MNegPriUser, and
similarly for the Secure equivalent MSNegPri.
This takes us from 6 M profile MMU modes to 8, which means
we need to bump NB_MMU_MODES; this is OK since the point
where we are forced to reduce TLB sizes is 9 MMU modes.
(It would in theory be possible to stick with 6 MMU indexes:
{mpu-disabled,user,privileged} x {secure,nonsecure} since
in the MPU-disabled case the result of an MPU lookup is
always the same for both user and privileged code. However
we would then need to rework the TB flags handling to put
user/priv into the TB flags separately from the mmuidx.
Adding an extra couple of mmu indexes is simpler.)
Backports commit 62593718d77c06ad2b5e942727cead40775d2395 from qemu
When we added the ARMMMUIdx_MSUser MMU index we forgot to
add it to the case statement in regime_is_user(), so we
weren't treating it as unprivileged when doing MPU lookups.
Correct the omission.
Backports commit 871bec7c44a453d9cab972ce1b5d12e1af0545ab from qemu
In ARMv7M the CPU ignores explicit writes to CONTROL.SPSEL
in Handler mode. In v8M the behaviour is slightly different:
writes to the bit are permitted but will have no effect.
We've already done the hard work to handle the value in
CONTROL.SPSEL being out of sync with what stack pointer is
actually in use, so all we need to do to fix this last loose
end is to update the condition we use to guard whether we
call write_v7m_control_spsel() on the register write.
Backports commit 83d7f86d3d27473c0aac79c1baaa5c2ab01b02d9 from qemu
For v8M it is possible for the CONTROL.SPSEL bit value and the
current stack to be out of sync. This means we need to update
the checks used in reads and writes of the PSP and MSP special
registers to use v7m_using_psp() rather than directly checking
the SPSEL bit in the control register.
Backports commit 1169d3aa5b19adca9384d954d80e1f48da388284 from qemu
EPYC-IBPB is a copy of the EPYC CPU model with
just CPUID_8000_0008_EBX_IBPB added.
Backports commit 8ebfafa796ca0cb2b035a7f06f836a675d8b48be from qemu
The new MSR IA32_SPEC_CTRL MSR was introduced by a recent Intel
microcode updated and can be used by OSes to mitigate
CVE-2017-5715. Unfortunately we can't change the existing CPU
models without breaking existing setups, so users need to
explicitly update their VM configuration to use the new *-IBRS
CPU model if they want to expose IBRS to guests.
The new CPU models are simple copies of the existing CPU models,
with just CPUID_7_0_EDX_SPEC_CTRL added and model_id updated.
Backports commit 61efbbf869293f1deb9ee39d44bd4e635de59fa7 from qemu
Add the new feature word and the "ibpb" feature flag.
Based on a patch by Paolo Bonzini.
Backports commit 1ade973f5202404e772aae7b1acd331270d246dc from qemu
It is valid to have a 48-character model ID on CPUID, however the
definition of X86CPUDefinition::model_id is char[48], which can
make the compiler drop the null terminator from the string.
If a CPU model happens to have 48 bytes on model_id, "-cpu help"
will print garbage and the object_property_set_str() call at
x86_cpu_load_def() will read data outside the model_id array.
We could increase the array size to 49, but this would mean the
compiler would not issue a warning if a 49-char string is used by
mistake for model_id.
To make things simpler, simply change model_id to be const char*,
and validate the string length using an assert() on
x86_register_cpudef_type().
Backports commit 4b220d88ba76fb2623ce4b8ba1f1eea66b82144e from qemu
In commit e3af7c788b73a6495eb9d94992ef11f6ad6f3c56 we
replaced direct calls to to cpu_ld*_code() with calls
to the x86_ld*_code() wrappers which incorporate an
advance of s->pc. Unfortunately we didn't notice that
in one place the old code was deliberately not incrementing
s->pc:
@@ -4501,7 +4528,7 @@ static target_ulong disas_insn(DisasContext *s, CPUState *cpu)
static const int pp_prefix[4] = {
0, PREFIX_DATA, PREFIX_REPZ, PREFIX_REPNZ
};
- int vex3, vex2 = cpu_ldub_code(env, s->pc);
+ int vex3, vex2 = x86_ldub_code(env, s);
if (!CODE64(s) && (vex2 & 0xc0) != 0xc0) {
/* 4.1.4.6: In 32-bit mode, bits [7:6] must be 11b,
This meant we were mishandling this set of instructions.
Remove the manual advance of s->pc for the "is VEX" case
(which is now done by x86_ldub_code()) and instead rewind
PC in the case where we decide that this isn't really VEX.
Backports commit 817a9fcba8043faa467929e7b0193df6bdc92211 from qemu
The refactoring of commit 296e5a0a6c3935 has a nasty bug:
it accidentally dropped the generation of code to raise
the UNDEF exception when disas_thumb2_insn() returns nonzero.
This means that 32-bit Thumb2 instruction patterns that
ought to UNDEF just act like nops instead. This is likely
to break any number of things, including the kernel's "disable
the FPU and use the UNDEF exception to identify when to turn
it back on again" trick.
Backports commit 7472e2efb049ea65a6a5e7261b78ebf5c561bc2f from qemu
In our various supported host OSes, the time_t type may be either 32
or 64 bit, and could in theory also be either signed or unsigned.
Notably, in OpenBSD time_t is a 64 bit type even if 'long' is 32
bits, so using LONG_MAX for TIME_MAX is incorrect.
Use an approach suggested by Paolo Bonzini which calculates
the maximum value of the type rather than hardcoding it;
to do this we use the TYPE_MAXIMUM macro from Gnulib.
Backports commit e7b47c22e2df14d55e3e4426688c929bf8e3f7fb from qemu
In do_ats_write(), rather than using extended_addresses_enabled() to
decide whether the value we get back from get_phys_addr() is a 64-bit
format PAR or a 32-bit one, use arm_s1_regime_using_lpae_format().
This is not really the correct answer, because the PAR format
depends on the AT instruction being used, not just on the
translation regime. However getting this correct requires a
significant refactoring, so that get_phys_addr() returns raw
information about the fault which the caller can then assemble
into a suitable FSR/PAR/syndrome for its purposes, rather than
get_phys_addr() returning a pre-formatted FSR.
However this change at least improves the situation by making
the PAR work correctly for address translation operations done
at AArch64 EL2 on the EL2 translation regime. In particular,
this is necessary for Xen to be able to run in our emulation,
so this seems like a safer interim fix given that we are in freeze.
Backports commit 50cd71b0d347c74517dcb7da447fe657fca57d9c from qemu
The CPU ID registers ID_AA64PFR0_EL1, ID_PFR1_EL1 and ID_PFR1
have a field for reporting presence of GICv3 system registers.
We need to report this field correctly in order for Xen to
work as a guest inside QEMU emulation. We mustn't incorrectly
claim the sysregs exist when they don't, though, or Linux will
crash.
Unfortunately the way we've designed the GICv3 emulation in QEMU
puts the system registers as part of the GICv3 device, which
may be created after the CPU proper has been realized. This
means that we don't know at the point when we define the ID
registers what the correct value is. Handle this by switching
them to calling a function at runtime to read the value, where
we can fill in the GIC field appropriately.
Backports commit 96a8b92ed8f02d5e86ad380d3299d9f41f99b072 from qemu
We use raw memory primitives along the !parallel_cpus paths in order to
simplify the endianness handling. Because of that, we did not benefit
from the generic changes to cpu_ldst_user_only_template.h.
The simplest fix is to manipulate helper_retaddr here.
Backports commit 3bdb5fcc9a08a9a47ce30c4e0c2d64c95190b49d from qemu
When we handle a signal from a fault within a user-only memory helper,
we cannot cpu_restore_state with the PC found within the signal frame.
Use a TLS variable, helper_retaddr, to record the unwind start point
to find the faulting guest insn.
Backports commit ec603b5584fa71213ef8f324fe89e4b27cc9d2bc from qemu
When we handle a signal from a fault within a user-only memory helper,
we cannot cpu_restore_state with the PC found within the signal frame.
Use a TLS variable, helper_retaddr, to record the unwind start point
to find the faulting guest insn.
Backports commit ec603b5584fa71213ef8f324fe89e4b27cc9d2bc from qemu
Fixes the following warning when compiling with gcc 5.4.0 with -O1
optimizations and --enable-debug:
target/arm/translate-a64.c: In function ‘aarch64_tr_translate_insn’:
target/arm/translate-a64.c:2361:8: error: ‘post_index’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (!post_index) {
^
target/arm/translate-a64.c:2307:10: note: ‘post_index’ was declared here
bool post_index;
^
target/arm/translate-a64.c:2386:8: error: ‘writeback’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (writeback) {
^
target/arm/translate-a64.c:2308:10: note: ‘writeback’ was declared here
bool writeback;
^
Note that idx comes from selecting 2 bits, and therefore its value
can be at most 3.
Backports commit 5ca66278c859bb1ded243755aeead2be6992ce73 from qemu
For AArch32 LDREXD and STREXD, architecturally the 32-bit word at the
lowest address is always Rt and the one at addr+4 is Rt2, even if the
CPU is big-endian. Our implementation does these with a single
64-bit store, so if we're big-endian then we need to put the two
32-bit halves together in the opposite order to little-endian,
so that they end up in the right places. We were trying to do
this with the gen_aa32_frob64() function, but that is not correct
for the usermode emulator, because there there is a distinction
between "load a 64 bit value" (which does a BE 64-bit access
and doesn't need swapping) and "load two 32 bit values as one
64 bit access" (where we still need to do the swapping, like
system mode BE32).
Backports commit 3448d47b3172015006b79197eb5a69826c6a7b6d from qemu
On a successful address translation instruction, PAR is supposed to
contain cacheability and shareability attributes determined by the
translation. We previously returned 0 for these bits (in line with the
general strategy of ignoring caches and memory attributes), but some
guest OSes may depend on them.
This patch collects the attribute bits in the page-table walk, and
updates PAR with the correct attributes for all LPAE translations.
Short descriptor formats still return 0 for these bits, as in the
prior implementation.
Backports commit 5b2d261d60caf9d988d91ca1e02392d6fc8ea104 from qemu
GCC 4.9 and newer stopped warning for missing braces around the
"universal" C zero initializer {0}. One such initializer sneaked
into scsi/qemu-pr-helper.c and is breaking the build with such
older GCC versions.
Detect the lack of support for the idiom, and disable the warning
in that case.
Backports commit 20bc94a2b8449b7700b6bfa25a87ce2320a1c649 from qemu
Rather than have separate code only used for guest_base,
rely on a recent change to handle constant pool entries.
Backports commit ba2c747992f8c315c2fbddba196ce9137430d61d from qemu
Both ARMv6 and AArch64 currently may drop complex guest_base values
into the constant pool. But generic code wasn't expecting that, and
the pool is not emitted. Correct that.
Backports commit 5b38ee31616d1532c3c3a6dc644a9160d608ed2f from qemu
WFI/E are often, but not always, 4 bytes long. When they are, we need to
set ARM_EL_IL_SHIFT in the syndrome register.
Pass the instruction length to HELPER(wfi), use it to decrement pc
appropriately and to pass an is_16bit flag to syn_wfx, which sets
ARM_EL_IL_SHIFT if needed.
Set dc->insn in both arm_tr_translate_insn and thumb_tr_translate_insn.
Backports commit 58803318e5a546b2eb0efd7a053ed36b6c29ae6f from qemu
Using the offset of a temporary, relative to TCGContext, rather than
its index means that we don't use 0. That leaves offset 0 free for
a NULL representation without having to leave index 0 unused.
Backports commit e89b28a63501c0ad6d2501fe851d0c5202055e70 from qemu
When we used structures for TCGv_*, we needed a macro in order to
perform a comparison. Now that we use pointers, this is just clutter
Backports commit 11f4e8f8bfaa2caaab24bef6bbbb8a0205015119 from qemu
The GET and MAKE functions weren't really specific enough.
We now have a full complement of functions that convert exactly
between temporaries, arguments, tcgv pointers, and indices.
The target/sparc change is also a bug fix, which would have affected
a host that defines TCG_TARGET_HAS_extr[lh]_i64_i32, i.e. MIPS64.
Backports commit dc41aa7d34989b552efe712ffe184236216f960b from qemu
Transform TCGv_* to an "argument" or a temporary.
For now, an argument is simply the temporary index.
Backports commit ae8b75dc6ec808378487064922f25f1e7ea7a9be from qemu
While we're touching many of the lines anyway, adjust the naming
of the functions to better distinguish when "TCGArg" vs "TCGTemp"
should be used.
Backports commit 6349039d0b06eda59820629b934944246b14a1c1 from qemu
Copy s->nb_globals or s->nb_temps to a local variable for the purposes
of iteration. This should allow the compiler to use low-overhead
looping constructs on some hosts.
Backports commit ac3b88911ebc6fc841f28898ee8aed40839debe2 from qemu
Rather than have a separate buffer of 10*max_ops entries,
give each opcode 10 entries. The result is actually a bit
smaller and should have slightly more cache locality.
Backports commit 75e8b9b7aa0b95a761b9add7e2f09248b101a392 from qemu
Besides being more correct, arbitrarily long instruction allow the
generation of a translation block that spans three pages. This
confuses the generator and even allows ring 3 code to poison the
translation block cache and inject code into other processes that are
in guest ring 3.
This is an improved (and more invasive) fix for commit 30663fd ("tcg/i386:
Check the size of instruction being translated", 2017-03-24). In addition
to being more precise (and generating the right exception, which is #GP
rather than #UD), it distinguishes better between page faults and too long
instructions, as shown by this test case:
int main()
{
char *x = mmap(NULL, 8192, PROT_READ|PROT_WRITE|PROT_EXEC,
MAP_PRIVATE|MAP_ANON, -1, 0);
memset(x, 0x66, 4096);
x[4096] = 0x90;
x[4097] = 0xc3;
char *i = x + 4096 - 15;
mprotect(x + 4096, 4096, PROT_READ|PROT_WRITE);
((void(*)(void)) i) ();
}
... which produces a #GP without the mprotect, and a #PF with it.
Backports commit b066c5375737ad0d630196dab2a2b329515a1d00 from qemu
These take care of advancing s->pc, and will provide a unified point
where to check for the 15-byte instruction length limit.
Backports commit e3af7c788b73a6495eb9d94992ef11f6ad6f3c56 from qemu
Most of the users of page_set_flags offset (page, page + len) as
the end points. One might consider this an error, since the other
users do supply an endpoint as the last byte of the region.
However, the first thing that page_set_flags does is round end UP
to the start of the next page. Which means computing page + len - 1
is in the end pointless. Therefore, accept this usage and do not
assert when given the exact size of the vm as the endpoint.
Backports commit de258eb07db6cf893ef1bfad8c0cedc0b983db55 from qemu
DEFINE_TYPES() will help to simplify following routine patterns:
static void foo_register_types(void)
{
type_register_static(&foo1_type_info);
type_register_static(&foo2_type_info);
...
}
type_init(foo_register_types)
or
static void foo_register_types(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(type_infos); i++) {
type_register_static(&type_infos[i]);
}
}
type_init(foo_register_types)
with a single line
DEFINE_TYPES(type_infos)
where types have static definition which could be consolidated in
a single array of TypeInfo structures.
It saves us ~6-10LOC per use case and would help to replace
imperative foo_register_types() there with declarative style of
type registration.
Backports commit 38b5d79b2e8cf6085324066d84e8bb3b3bbe8548 from qemu
it will help to remove code duplication of registration
static types in places that have open coded loop to
perform batch type registering.
Backports commit aa04c9d20704fa5b9ab239d5111adbcce5f49808 from qemu
The common situation of the SG instruction is that it is
executed from S&NSC memory by a CPU in NS state. That case
is handled by v7m_handle_execute_nsc(). However the instruction
also has defined behaviour in a couple of other cases:
* SG instruction in NS memory (behaves as a NOP)
* SG in S memory but CPU already secure (clears IT bits and
does nothing else)
* SG instruction in v8M without Security Extension (NOP)
These can be implemented in translate.c.
Backports commit 76eff04d166b8fe747adbe82de8b7e060e668ff9 from qemu
A few Thumb instructions are always unconditional even inside an
IT block (as opposed to being UNPREDICTABLE if used inside an
IT block): BKPT, the v8M SG instruction, and the A profile
HLT (debug halt) instruction.
This means we need to suppress the jump-over-instruction-on-condfail
code generation (though the IT state still advances as usual and
subsequent insns in the IT block may be conditional).
Backports commit dcf14dfb704519846f396a376339ebdb93eaf049 from qemu
Recent changes have left insn_crosses_page() more complicated
than it needed to be:
* it's only called from thumb_tr_translate_insn() so we know
for certain that we're looking at a Thumb insn
* the caller's check for dc->pc >= dc->next_page_start - 3
means that dc->pc can't possibly be 4 aligned, so there's
no need to check that (the check was partly there to ensure
that we didn't treat an ARM insn as Thumb, I think)
* we now have thumb_insn_is_16bit() which lets us do a precise
check of the length of the next insn, rather than opencoding
an inaccurate check
Simplify it down to just loading the first half of the insn
and calling thumb_insn_is_16bit() on it.
Backports commit 5b8d7289e9e92a0d7bcecb93cd189e245fef10cd from qemu
Refactor the Thumb decode to do the loads of the instruction words at
the top level rather than only loading the second half of a 32-bit
Thumb insn in the middle of the decode.
This is simple apart from the awkward case of Thumb1, where the
BL/BLX prefix and suffix instructions live in what in Thumb2 is the
32-bit insn space. To handle these we decode enough to identify
whether we're looking at a prefix/suffix that we handle as a 16 bit
insn, or a prefix that we're going to merge with the following suffix
to consider as a 32 bit insn. The translation of the 16 bit cases
then moves from disas_thumb2_insn() to disas_thumb_insn().
The refactoring has the benefit that we don't need to pass the
CPUARMState* down into the decoder code any more, but the major
reason for doing this is that some Thumb instructions must be always
unconditional regardless of the IT state bits, so we need to know the
whole insn before we emit the "skip this insn if the IT bits and cond
state tell us to" code. (The always unconditional insns are BKPT,
HLT and SG; the last of these is 32 bits.)
Backports commit 296e5a0a6c393553079a641c50521ae33ff89324 from qemu
The code which implements the Thumb1 split BL/BLX instructions
is guarded by a check on "not M or THUMB2". All we really need
to check here is "not THUMB2" (and we assume that elsewhere too,
eg in the ARCH(6T2) test that UNDEFs the Thumb2 insns).
This doesn't change behaviour because all M profile cores
have Thumb2 and so ARM_FEATURE_M implies ARM_FEATURE_THUMB2.
(v6M implements a very restricted subset of Thumb2, but we
can cross that bridge when we get to it with appropriate
feature bits.)
Backports commit 6b8acf256df09c8a8dd7dcaa79b06eaff4ad63f7 from qemu
Secure function return happens when a non-secure function has been
called using BLXNS and so has a particular magic LR value (either
0xfefffffe or 0xfeffffff). The function return via BX behaves
specially when the new PC value is this magic value, in the same
way that exception returns are handled.
Adjust our BX excret guards so that they recognize the function
return magic number as well, and perform the function-return
unstacking in do_v7m_exception_exit().
Backports commit d02a8698d7ae2bfed3b11fe5b064cb0aa406863b from qemu
Implement the SG instruction, which we emulate 'by hand' in the
exception handling code path.
Backports commit 333e10c51ef5876ced26f77b61b69ce0f83161a9 from qemu
Add the M profile secure MMU index values to the switch in
get_a32_user_mem_index() so that LDRT/STRT work correctly
rather than asserting at translate time.
Backports commit b9f587d62cebed427206539750ebf59bde4df422 from qemu
In preparation for adding tc.size to be able to keep track of
TB's using the binary search tree implementation from glib.
Backports commit e7e168f41364c6e83d0f75fc1b3ce7f9c41ccf76 from qemu
This prevents bit rot by ensuring the debug code is compiled when
building a user-mode target.
Unfortunately the helpers are user-mode-only so we cannot fully
get rid of the ifdef checks. Add a comment to explain this.
Backports commit 6eb062abd66611333056633899d3f09c2e795f4c from qemu
This gets rid of an ifdef check while ensuring that the debug code
is compiled, which prevents bit rot.
Backports commit dae9e03aed8e652f5dce2e5cab05dff83aa193b8 from qemu
And fix the following warning when DEBUG_TB_INVALIDATE is enabled
in translate-all.c:
CC mipsn32-linux-user/accel/tcg/translate-all.o
/data/src/qemu/accel/tcg/translate-all.c: In function ‘tb_alloc_page’:
/data/src/qemu/accel/tcg/translate-all.c:1201:16: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘tb_page_addr_t {aka unsigned int}’ [-Werror=format=]
printf("protecting code page: 0x" TARGET_FMT_lx "\n",
^
cc1: all warnings being treated as errors
/data/src/qemu/rules.mak:66: recipe for target 'accel/tcg/translate-all.o' failed
make[1]: *** [accel/tcg/translate-all.o] Error 1
Makefile:328: recipe for target 'subdir-mipsn32-linux-user' failed
make: *** [subdir-mipsn32-linux-user] Error 2
cota@flamenco:/data/src/qemu/build ((18f3fe1...) *$)$
Backports commit 67a5b5d2f6eb6d3b980570223ba5c478487ddb6f from qemu
This gets rid of some ifdef checks while ensuring that the debug code
is compiled, which prevents bit rot.
Backports commit 424079c13b692cfcd08866bc9ffec77b887fed4e from qemu
It is unlikely that we will ever want to call this helper passing
an argument other than the current PC. So just remove the argument,
and use the pc we already get from cpu_get_tb_cpu_state.
This change paves the way to having a common "tb_lookup" function.
Backports commit 7f11636dbee89b0e4d03e9e2b96e14649a7db778 from qemu
Reusing the have_tb_lock name, which is also defined in translate-all.c,
makes code reviewing unnecessarily harder.
Avoid potential confusion by renaming the local have_tb_lock variable
to something else.
Backports commit 841710c78e022cbc1f798cced035789725702dac from qemu
It looks like there was a transcription error when writing this code
initially. The code previously only decoded src or dst of rax. This
resolves
https://bugs.launchpad.net/qemu/+bug/1719984.
Backports commit e0dd5fd41a1a38766009f442967fab700d2d0550 from qemu
For the SG instruction and secure function return we are going
to want to do memory accesses using the MMU index of the CPU
in secure state, even though the CPU is currently in non-secure
state. Write arm_v7m_mmu_idx_for_secstate() to do this job,
and use it in cpu_mmu_index().
Backports commit b81ac0eb6315e602b18439961e0538538e4aed4f from qemu
In cpu_mmu_index() we try to do this:
if (env->v7m.secure) {
mmu_idx += ARMMMUIdx_MSUser;
}
but it will give the wrong answer, because ARMMMUIdx_MSUser
includes the 0x40 ARM_MMU_IDX_M field, and so does the
mmu_idx we're adding to, and we'll end up with 0x8n rather
than 0x4n. This error is then nullified by the call to
arm_to_core_mmu_idx() which masks out the high part, but
we're about to factor out the code that calculates the
ARMMMUIdx values so it can be used without passing it through
arm_to_core_mmu_idx(), so fix this bug first.
Backports commit fe768788d29597ee56fc11ba2279d502c2617457 from qemu
Implement the security attribute lookups for memory accesses
in the get_phys_addr() functions, causing these to generate
various kinds of SecureFault for bad accesses.
The major subtlety in this code relates to handling of the
case when the security attributes the SAU assigns to the
address don't match the current security state of the CPU.
In the ARM ARM pseudocode for validating instruction
accesses, the security attributes of the address determine
whether the Secure or NonSecure MPU state is used. At face
value, handling this would require us to encode the relevant
bits of state into mmu_idx for both S and NS at once, which
would result in our needing 16 mmu indexes. Fortunately we
don't actually need to do this because a mismatch between
address attributes and CPU state means either:
* some kind of fault (usually a SecureFault, but in theory
perhaps a UserFault for unaligned access to Device memory)
* execution of the SG instruction in NS state from a
Secure & NonSecure code region
The purpose of SG is simply to flip the CPU into Secure
state, so we can handle it by emulating execution of that
instruction directly in arm_v7m_cpu_do_interrupt(), which
means we can treat all the mismatch cases as "throw an
exception" and we don't need to encode the state of the
other MPU bank into our mmu_idx values.
This commit doesn't include the actual emulation of SG;
it also doesn't include implementation of the IDAU, which
is a per-board way to specify hard-coded memory attributes
for addresses, which override the CPU-internal SAU if they
specify a more secure setting than the SAU is programmed to.
Backports commit 35337cc391245f251bfb9134f181c33e6375d6c1 from qemu
Implement the register interface for the SAU: SAU_CTRL,
SAU_TYPE, SAU_RNR, SAU_RBAR and SAU_RLAR. None of the
actual behaviour is implemented here; registers just
read back as written.
When the CPU definition for Cortex-M33 is eventually
added, its initfn will set cpu->sau_sregion, in the same
way that we currently set cpu->pmsav7_dregion for the
M3 and M4.
Number of SAU regions is typically a configurable
CPU parameter, but this patch doesn't provide a
QEMU CPU property for it. We can easily add one when
we have a board that requires it.
Backports commit 9901c576f6c02d43206e5faaf6e362ab7ea83246 from qemu
