Add CP0 register MemoryMapID. Only data field is added.
The corresponding functionality will be added in future
patches.
Backports commit 3ef521ee9fe2d01d4bbcf3e4d5c91ed982bf3f60 from qemu
Correct existing CP0-related preprocessor constants (replace
"CPO" with "CP0" (form letter "O" to digit "0", when needed).
Besides, add preprocessor constants for CP0 subregisters.
The names of the subregisters were chosen to be in sync with
the table of corresponding assembler mnemonics found in the
documentation for I6500 and I6400 (release 1.0).
Backports commit 04992c8cd1c43ecdba39dd8c916db092db6ebae0 from qemu
Move comment containing summary of CP0 registers. Checkpatch
script reported some tabs in the resutling diff, so convert
these tabs to spaces too.
Backports commit ea9c5e836e205a87038c8153282d0b6d9234cda2 from qemu
This both advertises that we support four counters and enables them
because the pmu_num_counters() reads this value from PMCR.
Backports commit ac689a2e5155d129acaa39603e2a7a29abd90d89 from qemu
The instruction event is only enabled when icount is used, cycles are
always supported. Always defining get_cycle_count (but altering its
behavior depending on CONFIG_USER_ONLY) allows us to remove some
CONFIG_USER_ONLY #defines throughout the rest of the code.
Backports commit b2e2372511946fae86fbb8709edec7a41c6f3167 from qemu
Add arrays to hold the registers, the definitions themselves, access
functions, and logic to reset counters when PMCR.P is set. Update
filtering code to support counters other than PMCCNTR. Support migration
with raw read/write functions.
Backports commit 5ecdd3e47cadae83a62dc92b472f1fe163b56f59 from qemu
This commit doesn't add any supported events, but provides the framework
for adding them. We store the pm_event structs in a simple array, and
provide the mapping from the event numbers to array indexes in the
supported_event_map array. Because the value of PMCEID[01] depends upon
which events are supported at runtime, generate it dynamically.
Backports commit 57a4a11b2b281bb548b419ca81bfafb214e4c77a from qemu
This is immediately necessary for the PMUv3 implementation to check
ID_DFR0.PerfMon to enable/disable specific features, but defines the
full complement of fields for possible future use elsewhere.
Backports commit beceb99c0c1218d0b55cc04ce6ef77579d3416cb from qemu
Rename arm_ccnt_enabled to pmu_counter_enabled, and add logic to only
return 'true' if the specified counter is enabled and neither prohibited
or filtered.
Backports commit 033614c47de78409ad3fb39bb7bd1483b71c6789 from qemu
Because of the PMU's design, many register accesses have side effects
which are inter-related, meaning that the normal method of saving CP
registers can result in inconsistent state. These side-effects are
largely handled in pmu_op_start/finish functions which can be called
before and after the state is saved/restored. By doing this and adding
raw read/write functions for the affected registers, we avoid
migration-related inconsistencies.
Backports relevant parts of commit
980ebe87053792a5bdefaa87777c40914fd4f673 from qemu
pmccntr_read and pmccntr_write contained duplicate code that was already
being handled by pmccntr_sync. Consolidate the duplicated code into two
functions: pmccntr_op_start and pmccntr_op_finish. Add a companion to
c15_ccnt in CPUARMState so that we can simultaneously save both the
architectural register value and the last underlying cycle count - this
ensures time isn't lost and will also allow us to access the 'old'
architectural register value in order to detect overflows in later
patches.
Backports commit 5d05b9d462666ed21b7fef61aa45dec9aaa9f0ff from qemu
Add 4 attributes that controls the EL1 enable bits, as we may not
always want to turn on pointer authentication with -cpu max.
However, by default they are enabled.
Backports relevant parts of commit
1ae9cfbd470bffb8d9bacd761344e9b5e8adecb6 from qemu.
This is the main crypto routine, an implementation of QARMA.
This matches, as much as possible, ARM pseudocode.
Backports commit 990870b205ddfdba3fd3c1321e6083005ef59d1a from qemu
This is not really functional yet, because the crypto is not yet
implemented. This, however follows the AddPAC pseudo function.
Backports commit 63ff0ca94cb84764d2aee45b37c5502a54811dab from qemu
This is not really functional yet, because the crypto is not yet
implemented. This, however follows the Auth pseudo function.
Backports commit a7bfa086c973a51fc18116c9d2e22a0e0069edba from qemu
Stripping out the authentication data does not require any crypto,
it merely requires the virtual address parameters.
Backports commit 04d13549fa10bb9775a90701e4e6fd0a2cbf83cb from qemu
The arm_regime_tbi{0,1} functions are replacable with the new function
by giving the lowest and highest address.
Backports commit 5d8634f5a3a8474525edcfd581a659830e9e97c0 from qemu
Use TBID in aa64_va_parameters depending on the data parameter.
This automatically updates all existing users of the function.
Backports commit 8220af7e4d34c858898fbfe55943aeea8f4e875f from qemu
We need to reuse this from helper-a64.c. Provide a stub
definition for CONFIG_USER_ONLY. This matches the stub
definitions that we removed for arm_regime_tbi{0,1} before.
Backports commit bf0be433878935e824479e8ae890493e1fb646ed from qemu
We will shortly want to talk about TBI as it relates to data.
Passing around a pair of variables is less convenient than a
single variable.
Backports commit 476a4692f06e381117fb7ad0d04d37c9c2612198 from qemu
Split out functions to extract the virtual address parameters.
Let the functions choose T0 or T1 address space half, if present.
Extract (most of) the control bits that vary between EL or Tx.
Backports commit ba97be9f4a4ecaf16a1454dc669e5f3d935d3b63 from qemu
While we could expose stage_1_mmu_idx, the combination is
probably going to be more useful.
Backports commit 64be86ab1b5ef10b660a4230ee7f27c0da499043 from qemu
The pattern
ARMMMUIdx mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false));
is computing the full ARMMMUIdx, stripping off the ARM bits,
and then putting them back.
Avoid the extra two steps with the appropriate helper function.
Backports commit 50494a279dab22a015aba9501a94fcc3cd52140e from qemu
Not that there are any stores involved, but why argue with ARM's
naming convention.
Backports commit bd889f4810839a2b68e339696ccf7c406cd62879 from qemu
Now properly signals unallocated for REV64 with SF=0.
Allows for the opcode2 field to be decoded shortly.
Backports commit 18de2813c35e359621a24a0a2a77570e83cb73b9 from qemu
The cryptographic internals are stubbed out for now,
but the enable and trap bits are checked.
Backports commit 0d43e1a2d29a05f7b0d5629caaff18733cbdf3bb from qemu
There are 5 bits of state that could be added, but to save
space within tbflags, add only a single enable bit.
Helpers will determine the rest of the state at runtime.
Backports commit 0816ef1bfcd3ac53e7454b62ca436727887f6056 from qemu
