Now the VFP_CONV_FIX macros can handle fp16's distinction between the
width of the operation and the width of the type used to pass operands,
use the macros rather than the open-coded functions.
This creates an extra six helper functions, all of which we are going
to need for the AArch32 VFP fp16 instructions.
Backports commit 414ba270c4fb758d987adf37ae9bfe531715c604
Implement VFP fp16 for VABS, VNEG and VSQRT. This is all
the fp16 insns that use the DO_VFP_2OP macro, because there
is no fp16 version of VMOV_reg.
Notes:
* the gen_helper_vfp_negh already exists as we needed to create
it for the fp16 multiply-add insns
* as usual we need to use the f16 version of the fp_status;
this is only relevant for VSQRT
Backports ce2d65a5d191380756cdac7a1fd1ba76bd1621cf
Implement fp16 versions of the VFP VMLA, VMLS, VNMLS, VNMLA, VNMUL
instructions. (These are all the remaining ones which we implement
via do_vfp_3op_[hsd]p().)
Backports commit e7cb0ded52c6d7b86585b09935fe7caeb9e38b69
Implmeent VFP fp16 support for simple binary-operator VFP insns VADD,
VSUB, VMUL, VDIV, VMINNM and VMAXNM:
* make the VFP_BINOP() macro generate float16 helpers as well as
float32 and float64
* implement a do_vfp_3op_hp() function similar to the existing
do_vfp_3op_sp()
* add decode for the half-precision insn patterns
Note that the VFP_BINOP macro use creates a couple of unused helper
functions vfp_maxh and vfp_minh, but they're small so it's not worth
splitting the BINOP operations into "needs halfprec" and "no
halfprec" groups.
Backports commit 120a0eb3ea23a5b06fae2f3daebd46a4035864cf
Vector AMOs operate as if aq and rl bits were zero on each element
with regard to ordering relative to other instructions in the same hart.
Vector AMOs provide no ordering guarantee between element operations
in the same vector AMO instruction
Backports 268fcca66bde62257960ec8d859de374315a5e3d
The unit-stride fault-only-fault load instructions are used to
vectorize loops with data-dependent exit conditions(while loops).
These instructions execute as a regular load except that they
will only take a trap on element 0.
Backports commit 022b4ecf775ffeff522eaea4f0d94edcfe00a0a9 from qemu
Vector indexed operations add the contents of each element of the
vector offset operand specified by vs2 to the base effective address
to give the effective address of each element.
Backports f732560e3551c0823cee52efba993fbb8f689a36
Vector strided operations access the first memory element at the base address,
and then access subsequent elements at address increments given by the byte
offset contained in the x register specified by rs2.
Vector unit-stride operations access elements stored contiguously in memory
starting from the base effective address. It can been seen as a special
case of strided operations.
Backports 751538d5da557e5c10e5045c2d27639580ea54a7
vsetvl and vsetvli are two configure instructions for vl, vtype. TB flags
should update after configure instructions. The (ill, lmul, sew ) of vtype
and the bit of (VSTART == 0 && VL == VLMAX) will be placed within tb_flags.
Backports 2b7168fc43fb270fb89e1dddc17ef54714712f3a from qemu
For contiguous predicated memory operations, we want to
minimize the number of tlb lookups performed. We have
open-coded this for sve_ld1_r, but for correctness with
MTE we will need this for all of the memory operations.
Create a structure that holds the bounds of active elements,
and metadata for two pages. Add routines to find those
active elements, lookup the pages, and run watchpoints
for those pages.
Temporarily mark the functions unused to avoid Werror.
Backports commit b4cd95d2f4c7197b844f51b29871d888063ea3e7 from qemu
Use the "normal" memory access functions, rather than the
softmmu internal helper functions directly.
Since fb901c9, cpu_mem_index is now a simple extract
from env->hflags and not a large computation. Which means
that it's now more work to pass around this value than it
is to recompute it.
This only adjusts the primitives, and does not clean up
all of the uses within sve_helper.c.
Now that we know that the operation is on a single page,
we need not loop over pages while probing.
Backports commit e26d0d226892f67435cadcce86df0ddfb9943174 from qemu
The m68k-specific softfloat code includes a function floatx80_mod that
is extremely similar to floatx80_rem, but computing the remainder
based on truncating the quotient toward zero rather than rounding it
to nearest integer. This is also useful for emulating the x87 fprem
and fprem1 instructions. Change the floatx80_rem implementation into
floatx80_modrem that can perform either operation, with both
floatx80_rem and floatx80_mod as thin wrappers available for all
targets.
There does not appear to be any use for the _mod operation for other
floating-point formats in QEMU (the only other architectures using
_rem at all are linux-user/arm/nwfpe, for FPA emulation, and openrisc,
for instructions that have been removed in the latest version of the
architecture), so no change is made to the code for other formats.
Backports commit 6b8b0136ab3018e4b552b485f808bf66bcf19ead from qemu
Call the helper_hyp_tlb_flush() function on hfence instructions which
will generate an illegal insruction execption if we don't have
permission to flush the Hypervisor level TLBs.
Backports commit 2761db5fc20943bbd606b6fd49640ac000398de6 from qemu
Rather than passing an opcode to a helper, fully decode the
operation at translate time. Use clear_tail_16 to zap the
balance of the SVE register with the AdvSIMD write.
Backports commit 43fa36c96c24349145497adc1b451f9caf74e344 from qemu
Rather than passing an opcode to a helper, fully decode the
operation at translate time. Use clear_tail_16 to zap the
balance of the SVE register with the AdvSIMD write.
Backports commit afc8b7d32668547308bdd654a63cf5228936e0ba from qemu
With this conversion, we will be able to use the same helpers
with sve. This also fixes a bug in which we failed to clear
the high bits of the SVE register after an AdvSIMD operation.
Backports commit 1738860d7e60dec5dbeba17f8b44d31aae3accac from qemu
No host backend support yet, but the interfaces for rotls
are in place. Only implement left-rotate for now, as the
only known use of vector rotate by scalar is s390x, so any
right-rotate would be unused and untestable.
Backports commit 23850a74afb641102325b4b7f74071d929fc4594 from qemu
No host backend support yet, but the interfaces for rotlv
and rotrv are in place.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Drop the generic expansion from rot to shift; we can do better
for each backend, and then this code becomes unused.
Backports commit 5d0ceda902915e3f0e21c39d142c92c4e97c3ebb from qemu
No host backend support yet, but the interfaces for rotli
are in place. Canonicalize immediate rotate to the left,
based on a survey of architectures, but provide both left
and right shift interfaces to the translators.
Backports commit b0f7e7444c03da17e41bf327c8aea590104a28ab from qemu
Convert the Neon VADD, VSUB, VABD 3-reg-same insns to decodetree.
We already have gvec helpers for addition and subtraction, but must
add one for fabd.
Backports commit a26a352bb498662cd0c205cb433a352f86fac7d2 from qemu
The functions eliminate duplication of the special cases for
this operation. They match up with the GVecGen2iFn typedef.
Add out-of-line helpers. We got away with only having inline
expanders because the neon vector size is only 16 bytes, and
we know that the inline expansion will always succeed.
When we reuse this for SVE, tcg-gvec-op may decide to use an
out-of-line helper due to longer vector lengths.
Backports commit 631e565450c483e0622eec3d8b61d7fa41d16bca from qemu
Add a version of tcg_gen_dup_* that takes both immediate and
a vector element size operand. This will replace the set of
tcg_gen_gvec_dup{8,16,32,64}i functions that encode the element
size within the function name.
Backports commit 44c94677febd15488f9190b11eaa4a08e8ac696b from qemu
Make cpu_register() (renamed to arm_cpu_register()) available
from internals.h so we can register CPUs also from other files
in the future.
Backports commit 37bcf244454f4efb82e2c0c64bbd7eabcc165a0c from qemu
These instructions are often used in glibc's string routines.
They were the final uses of the 32-bit at a time neon helpers.
Backports commit 6b375d3546b009d1e63e07397ec9c6af256e15e9 from qemu
Currently, TIME CSRs are emulated only for user-only mode. This
patch add TIME CSRs emulation for privileged mode.
For privileged mode, the TIME CSRs will return value provided
by rdtime callback which is registered by QEMU machine/platform
emulation (i.e. CLINT emulation). If rdtime callback is not
available then the monitor (i.e. OpenSBI) will trap-n-emulate
TIME CSRs in software.
We see 25+% performance improvement in hackbench numbers when
TIME CSRs are not trap-n-emulated.
Backports commit c695724868ce4049fd79c5a509880dbdf171e744 from qemu
When the Hypervisor extension is in use we only enable floating point
support when both status and vsstatus have enabled floating point
support.
Backports commit 29409c1d921d607873268671bf11a088efb5558e from qemu
We still need two different helpers, since NEON and SVE2 get the
inputs from different locations within the source vector. However,
we can convert both to the same internal form for computation.
The sve2 helper is not used yet, but adding it with this patch
helps illustrate why the neon changes are helpful.
Backports commit e7e96fc5ec8c79dc77fef522d5226ac09f684ba5 from qemu
The gvec form will be needed for implementing SVE2.
Extend the implementation to operate on uint64_t instead of uint32_t.
Use a counted inner loop instead of terminating when op1 goes to zero,
looking toward the required implementation for ARMv8.4-DIT.
Backports commit a21bb78e5817be3f494922e1dadd6455fe5d6318 from qemu
These instructions shift left or right depending on the sign
of the input, and 7 bits are significant to the shift. This
requires several masks and selects in addition to the actual
shifts to form the complete answer.
That said, the operation is still a small improvement even for
two 64-bit elements -- 13 vector operations instead of 2 * 7
integer operations.
Backports commit 87b74e8b6edd287ea2160caa0ebea725fa8f1ca1 from qemu
