Implement hardware page table walker. This implementation is
limiter only to MIPS32.
Backports commit 074cfcb4daedf59ccbbbc83c24eee80e0e8f4c71 from qemu
Add reset state for PWSize and PWField registers. The reset state
is different for pre-R6 and R6 (and post-R6) ISAa
Backports commit 630107955757b9dfc5c09f105caa267eded2e3b1 from qemu
Add PWCtl register (CP0 Register 5, Select 6).
The PWCtl register configures hardware page table walking for TLB
refills.
This register is required for the hardware page walker feature. It
exists only if Config3 PW bit is set to 1. It contains following
fields:
PWEn (31) - Hardware Page Table walker enable
PWDirExt (30) - If 1, 4-th level implemented (MIPS64 only)
XK (28) - If 1, walker handles xkseg (MIPS64 only)
XS (27) - If 1, walker handles xsseg (MIPS64 only)
XU (26) - If 1, walker handles xuseg (MIPS64 only)
DPH (7) - Dual Page format of Huge Page support
HugePg (6) - Huge Page PTE supported in Directory levels
PSn (5..0) - Bit position of PTEvld in Huge Page PTE
Backports commit 103be64c26c166f12b3e1308edadef3443723ff1 from qemu
Add PWSize register (CP0 Register 5, Select 7).
The PWSize register configures hardware page table walking for TLB
refills.
This register is required for the hardware page walker feature. It
exists only if Config3 PW bit is set to 1. It contains following
fields:
BDW (37..32) Base Directory index width (MIPS64 only)
GDW (29..24) Global Directory index width
UDW (23..18) Upper Directory index width
MDW (17..12) Middle Directory index width
PTW (11..6 ) Page Table index width
PTEW ( 5..0 ) Left shift applied to the Page Table index
Backports commit 20b28ebc49945583d7191b57755cfd92433de9ff from qemu
Add PWField register (CP0 Register 5, Select 6).
The PWField register configures hardware page table walking for TLB
refills.
This register is required for the hardware page walker feature. It
exists only if Config3 PW bit is set to 1. It contains following
fields:
MIPS64:
BDI (37..32) - Base Directory index
GDI (29..24) - Global Directory index
UDI (23..18) - Upper Directory index
MDI (17..12) - Middle Directory index
PTI (11..6 ) - Page Table index
PTEI ( 5..0 ) - Page Table Entry shift
MIPS32:
GDW (29..24) - Global Directory index
UDW (23..18) - Upper Directory index
MDW (17..12) - Middle Directory index
PTW (11..6 ) - Page Table index
PTEW ( 5..0 ) - Page Table Entry shift
Backports commit fa75ad1459f4f6abbeb6d375a812dfad61320f58 from qemu
Add PWBase register (CP0 Register 5, Select 5).
The PWBase register contains the Page Table Base virtual address.
This register is required for the hardware page walker feature. It
exists only if Config3 PW bit is set to 1.
Backports commit 5e31fdd59fda5c4ba9eb0daadc2a26273a29a0b6 from qemu
Add field corresponding to CP0 Config2 to DisasContext. This is
needed for availability control via Config2 bits.
Backports commit 49735f76db25bf10f57973d5249f17151b801760 from qemu
Do following replacements:
ASE_DSPR2 -> ASE_DSP_R2
ASE_DSPR3 -> ASE_DSP_R3
MIPS_HFLAG_DSPR2 -> MIPS_HFLAG_DSP_R2
MIPS_HFLAG_DSPR3 -> MIPS_HFLAG_DSP_R3
check_dspr2() -> check_dsp_r2()
check_dspr3() -> check_dsp_r3()
and several other similar minor replacements.
Backports commit 908f6be1b9cbc270470230f805d6f7474ab3178d from qemu
Add infrastructure for availability control for DSP R3 ASE MIPS
instructions. Only BPOSGE32C currently belongs to DSP R3 ASE, but
this is likely to be changed in near future.
Backports commit 59e781fbf13a2dede15437d055b09d7ea120dcac from qemu
Increase the size of insn_flags holder size to 64 bits. This is
needed for future extensions since existing bits are almost all used.
Backports commit f9c9cd63e3dd84c5f052deec880ec92046bbe305 from qemu
Add a comment that contains a list all MXU instructions,
expressed in assembler mnemonics.
Backports commit 1d0e663c5f25345a6702d8a83c051b83f3462299 from qemu
Add a comment before each CP0 register section in CPUMIPSState
definition, thus visually separating these sections.
Backports commit 50e7edc5ac25af2faaacd1f91e177c7de7d696c3 from qemu
Add a comment with an overview of CP0 registers close to the
definition of their corresponding fields in CPUMIPSState.
Backports commit a86d421e18d58b32d6eaba1e79160e2b4e5a0a6c from qemu
The get_phys_addr() functions take a pointer to an ARMMMUFaultInfo
struct, which they fill in only if a fault occurs. This means that
the caller must always zero-initialize the struct before passing
it in. We forgot to do this in v7m_stack_read() and v7m_stack_write().
Correct the error.
Backports commit ab44c7b71fa683b9402bea0d367b87c881704188 from qemu
This is an amendment to my earlier patch:
commit 7ece99b17e832065236c07a158dfac62619ef99b
Backports commit 599b71e277ac7e92807191b20b7163a28c5450ad from qemu
When QEMU provides the equivalent of the EL3 firmware, we
need to enable HVCs in scr_el3 when turning on CPUs that
target EL2.
Backports commit 86278c33d1d71196f5e22ce3ce82a1b34a199754 from qemu
At present we assert:
arm_el_is_aa64: Assertion `el >= 1 && el <= 3' failed.
The comment in arm_el_is_aa64 explains why asking about EL0 without
extra information is impossible. Add an extra argument to provide
it from the surrounding context.
Fixes: 0ab5953b00b3
Backports commit 9a05f7b67436abdc52bce899f56acfde2e831454 from qemu
Updating the NS stack pointer via MSR to SP_NS should include
a check whether the new SP value is below the stack limit.
No other kinds of update to the various stack pointer and
limit registers via MSR should perform a check.
Backports commit 167765f0739e4a108e8c2e2ff2f37917df5658f9 from qemu
Add the v8M stack checks for the VLDM/VSTM
(aka VPUSH/VPOP) instructions. This code is currently
unreachable because we haven't yet implemented M profile
floating point support, but since the change is simple,
we add it now because otherwise we're likely to forget to
do it later.
Backports commit 8a954faf5412d5073d585d85a1da63a09bb5d84e from qemu
Add v8M stack checks for the 16-bit Thumb push/pop
encodings: STMDB, STMFD, LDM, LDMIA, LDMFD.
Backports commit aa369e5c08bbe2748d2be96f13f4ef469a4d3080 from qemu
Add v8M stack checks for the instructions in the T32
"load/store single" encoding class: these are the
"immediate pre-indexed" and "immediate, post-indexed"
LDR and STR instructions.
Backports commit 0bc003bad9752afc61624cb680226c922f34f82c from qemu
Add the v8M stack checks for:
* LDM (T2 encoding)
* STM (T2 encoding)
This includes the 32-bit encodings of the instructions listed
in v8M ARM ARM rule R_YVWT as
* LDM, LDMIA, LDMFD
* LDMDB, LDMEA
* POP (multiple registers)
* PUSH (muliple registers)
* STM, STMIA, STMEA
* STMDB, STMFD
We perform the stack limit before doing any other part
of the load or store.
Backports commit 7c0ed88e7d6bee3e55c3d8935c46226cb544191a from qemu
Add the v8M stack checks for:
* LDRD (immediate)
* STRD (immediate)
Loads and stores are more complicated than ADD/SUB/MOV, because we
must ensure that memory accesses below the stack limit are not
performed, so we can't simply do the check when we actually update
SP.
For these instructions, if the stack limit check triggers
we must not:
* perform any memory access below the SP limit
* update PC, SP or the load/store base register
but it is IMPDEF whether we:
* perform any accesses above or equal to the SP limit
* update destination registers for loads
For QEMU we choose to always check the limit before doing any other
part of the load or store, so we won't update any registers or
perform any memory accesses.
It is UNKNOWN whether the limit check triggers for a load or store
where the initial SP value is below the limit and one of the stores
would be below the limit, but the writeback moves SP to above the
limit. For QEMU we choose to trigger the check in this situation.
Note that limit checks happen only for loads and stores which update
SP via writeback; they do not happen for loads and stores which
simply use SP as a base register.
Backports commit 910d7692e5b60f2c2d08cc3d6d36076e85b6a69d from qemu
Add checks for breaches of the v8M stack limit when the
stack pointer is decremented to push the exception frame
for exception entry.
Note that the exception-entry case is unique in that the
stack pointer is updated to be the limit value if the limit
is hit (per rule R_ZLZG).
Backports commit c32da7aa6205a5ff62ae8d5062f7cad0eae4c1fd from qemu
Add some comments to the Thumb decoder indicating what bits
of the instruction have been decoded at various points in
the code.
This is not an exhaustive set of comments; we're gradually
adding comments as we work with particular bits of the code.
Backports commit a2d12f0f34e9c5ef8a193556fde983aa186fa73a from qemu
Add code to insert calls to a helper function to do the stack
limit checking when we handle these forms of instruction
that write to SP:
* ADD (SP plus immediate)
* ADD (SP plus register)
* SUB (SP minus immediate)
* SUB (SP minus register)
* MOV (register)
Backports commit 5520318939fea5d659bf808157cd726cb967b761 from qemu
We're going to want v7m_using_psp() in op_helper.c in the
next patch, so move it from helper.c to internals.h.
Backports commit 5529bf188d996391ff52a0e1801daf9c6a6bfcb0 from qemu
Define EXCP_STKOF, and arrange for it to cause us to take
a UsageFault with CFSR.STKOF set.
Backports commit 86f026de22d8854eecc004af44895de74225794f from qemu
The Arm v8M architecture includes hardware stack limit checking.
When certain instructions update the stack pointer, if the new
value of SP is below the limit set in the associated limit register
then an exception is taken. Add a TB flag that tracks whether
the limit-checking code needs to be emitted.
Backports commit 4730fb85035e99c909db7d14ef76cd17f28f4423 from qemu
There is quite a lot of code required to compute cpu_mem_index,
or even put together the full TCGMemOpIdx. This can easily be
done at translation time.
Backports commit 500d04843ba953dc4560e44f04001efec38c14a6 from qemu
This implements the feature for softmmu, and moves the
main loop out of a macro and into a function.
Backports commit 116347ce20bb7b5cac17bf2b0e6f607530b50862 from qemu
We can choose the endianness at translation time, rather than
re-computing it at execution time.
Backports commit 28d57f2dc59c287e1c40239509b0a325fd00e32f from qemu
We can choose the endianness at translation time, rather than
re-computing it at execution time.
Backports commit 7d0a57a2e1cea188b9023261a404d7a211117230 from qemu
This fixes the endianness problem for softmmu, and moves
the main loop out of a macro and into an inlined function.
Backports commit 78cf1b886aa1b95c97fc5114641515c2892bb240 from qemu
This fixes the endianness problem for softmmu, and moves
the main loop out of a macro and into an inlined function.
Backports commit d4f75f25b43041e7a46d12352b3c70ae457d8cea from qemu
This fixes the endianness problem for softmmu, and moves the
main loop out of a macro and into an inlined function
Backports commit 9fd46c8362e0a45d04ccceae7051d06dd65c1d57 from qemu
Use the same *_tlb primitives as we use for ld1.
For linux-user, this hoists the set of helper_retaddr. For softmmu,
hoists the computation of the current mmu_idx outside the loop,
fixes the endianness problem, and moves the main loop out of a
macro and into an inlined function.
Backports commit f27d4dc2af0de9b7b45c955882b8420905c6efe8 from qemu
Uses tlb_vaddr_to_host for correct operation with softmmu.
Optimize for accesses within a single page or pair of pages.
Backports commit 9123aeb6fcb14e0955ebe4e2a613802cfa0503ea from qemu
