The AArch32 virtualization extensions support these fault address
registers:
* HDFAR: aliased with AArch64 FAR_EL2[31:0] and AArch32 DFAR(S)
* HIFAR: aliased with AArch64 FAR_EL2[63:32] and AArch32 IFAR(S)
Implement the accessors for these. This fixes in passing a bug
where we weren't implementing the "RES0 from EL3 if EL2 not
implemented" behaviour for AArch64 FAR_EL2.
Backports commit cba517c31e7df8932c4473c477a0f01d8a0adc48 from qemu
Implement the AArch32 HVBAR register; we can do this just by
making the existing VBAR_EL2 regdefs be STATE_BOTH.
Backports commit d79e0c0608899428281a17c414ccf1a82d86ab85 from qemu
ARMCPRegInfo structs will default to .cp = 15 if they
are ARM_CP_STATE_BOTH, but not if they are ARM_CP_STATE_AA32
(because a coprocessor number of 0 is valid for AArch32).
We forgot to explicitly set .cp = 15 for the HMAIR1 and
HAMAIR1 regdefs, which meant they would UNDEF when the guest
tried to access them under cp15.
Backports commit b5ede85bfb7ba1a8f6086494c82f400b29969f65 from qemu
We implement the HAMAIR1 register as RAZ/WI; we had a typo in the
regdef, though, and were incorrectly naming it HMAIR1 (which is
a different register which we also implement as RAZ/WI).
Backports commit 55b53c718b2f684793eeefcf1c1a548ee97e23aa from qemu
When FZ is set, input_denormal exceptions are recognized, but this does
not happen with FZ16. The softfloat code has no way to distinguish
these bits and will raise such exceptions into fp_status_f16.flags,
so ignore them when computing the accumulated flags.
Backports commit 19062c169e5bcdda3d60df9161228e107bf0f96e from qemu
When support for FZ16 was added, we failed to include the bit
within FPCR_MASK, which means that it could never be set.
Continue to zero FZ16 when ARMv8.2-FP16 is not enabled.
Fixes: d81ce0ef2c4
Backports commit 0b62159be33d45d00dfa34a317c6d3da30ffb480 from qemu
Tailchaining is an optimization in handling of exception return
for M-profile cores: if we are about to pop the exception stack
for an exception return, but there is a pending exception which
is higher priority than the priority we are returning to, then
instead of unstacking and then immediately taking the exception
and stacking registers again, we can chain to the pending
exception without unstacking and stacking.
For v6M and v7M it is IMPDEF whether tailchaining happens for pending
exceptions; for v8M this is architecturally required. Implement it
in QEMU for all M-profile cores, since in practice v6M and v7M
hardware implementations generally do have it.
(We were already doing tailchaining for derived exceptions which
happened during exception return, like the validity checks and
stack access failures; these have always been required to be
tailchained for all versions of the architecture.)
Backports commit 5f62d3b9e67bfc3deb970e3c7fb7df7e57d46fc3 from qemu
On exception return for M-profile, we must restore the CONTROL.SPSEL
bit from the EXCRET value before we do any kind of tailchaining,
including for the derived exceptions on integrity check failures.
Otherwise we will give the guest an incorrect EXCRET.SPSEL value on
exception entry for the tailchained exception.
Backports commit 89b1fec193b81b6ad0bd2975f2fa179980cc722e from qemu
In do_v7m_exception_exit(), we use the exc_secure variable to track
whether the exception we're returning from is secure or non-secure.
Unfortunately the statement initializing this was accidentally
inside an "if (env->v7m.exception != ARMV7M_EXCP_NMI)" conditional,
which meant that we were using the wrong value for NMI handlers.
Move the initialization out to the right place.
Backports commit b8109608bc6f3337298d44ac4369bf0bc8c3a1e4 from qemu
One of the required effects of setting HCR_EL2.TGE is that when
SCR_EL3.NS is 1 then SCTLR_EL1.M must behave as if it is zero for
all purposes except direct reads. That is, it effectively disables
the MMU for the NS EL0/EL1 translation regime.
Backports commit 3d0e3080d8b7abcddc038d18e8401861c369c4c1 from qemu
The IMO, FMO and AMO bits in HCR_EL2 are defined to "behave as
1 for all purposes other than direct reads" if HCR_EL2.TGE
is set and HCR_EL2.E2H is 0, and to "behave as 0 for all
purposes other than direct reads" if HCR_EL2.TGE is set
and HRC_EL2.E2H is 1.
To avoid having to check E2H and TGE everywhere where we test IMO and
FMO, provide accessors arm_hcr_el2_imo(), arm_hcr_el2_fmo()and
arm_hcr_el2_amo(). We don't implement ARMv8.1-VHE yet, so the E2H
case will never be true, but we include the logic to save effort when
we eventually do get to that.
(Note that in several of these callsites the change doesn't
actually make a difference as either the callsite is handling
TGE specially anyway, or the CPU can't get into that situation
with TGE set; we change everywhere for consistency.)
Backports commit ac656b166b57332ee397e9781810c956f4f5fde5 from qemu
Some debug registers can be trapped via MDCR_EL2 bits TDRA, TDOSA,
and TDA, which we implement in the functions access_tdra(),
access_tdosa() and access_tda(). If MDCR_EL2.TDE or HCR_EL2.TGE
are 1, the TDRA, TDOSA and TDA bits should behave as if they were 1.
Implement this by having the access functions check MDCR_EL2.TDE
and HCR_EL2.TGE.
Backports commit 30ac6339dca3fe0d05a611f12eedd5af20af585a from qemu
Forbid stack alignment change. (CCR)
Reserve FAULTMASK, BASEPRI registers.
Report any fault as a HardFault. Disable MemManage, BusFault and
UsageFault, so they always escalated to HardFault. (SHCSR)
Backports commit 22ab3460017cfcfb6b50f05838ad142e08becce5 from qemu
To correctly handle small (less than TARGET_PAGE_SIZE) MPU regions,
we must correctly handle the case where the address being looked
up hits in an MPU region that is not small but the address is
in the same page as a small region. For instance if MPU region
1 covers an entire page from 0x2000 to 0x2400 and MPU region
2 is small and covers only 0x2200 to 0x2280, then for an access
to 0x2000 we must not return a result covering the full page
even though we hit the page-sized region 1. Otherwise we will
then cache that result in the TLB and accesses that should
hit region 2 will incorrectly find the region 1 information.
Check for the case where we miss an MPU region but it is still
within the same page, and in that case narrow the size we will
pass to tlb_set_page_with_attrs() for whatever the final
outcome is of the MPU lookup.
Backports commit 9d2b5a58f85be2d8e129c4b53d6708ecf8796e54 from qemu
For M-profile exception returns, the mmu index to use for exception
return unstacking is supposed to be that of wherever we are returning to:
* if returning to handler mode, privileged
* if returning to thread mode, privileged or unprivileged depending on
CONTROL.nPRIV for the destination security state
We were passing the wrong thing as the 'priv' argument to
arm_v7m_mmu_idx_for_secstate_and_priv(). The effect was that guests
which programmed the MPU to behave differently for privileged and
unprivileged code could get spurious MemManage Unstack exceptions.
Backports commit 2b83714d4ea659899069a4b94aa2dfadc847a013 from qemu
Leave ARM_CP_SVE, removing ARM_CP_FPU; the sve_access_check
produced by the flag already includes fp_access_check. If
we also check ARM_CP_FPU the double fp_access_check asserts.
Backports commit 11d7870b1b4d038d7beb827f3afa72e284701351 from qemu
Since kernel commit a86bd139f2 (arm64: arch_timer: Enable CNTVCT_EL0
trap..), released in kernel version v4.12, user-space has been able
to read these system registers. As we can't use QEMUTimer's in
linux-user mode we just directly call cpu_get_clock().
Backports commit 26c4a83bd4707797868174332a540f7d61288d15 from qemu
Allow ARMv8M to handle small MPU and SAU region sizes, by making
get_phys_add_pmsav8() set the page size to the 1 if the MPU or
SAU region covers less than a TARGET_PAGE_SIZE.
We choose to use a size of 1 because it makes no difference to
the core code, and avoids having to track both the base and
limit for SAU and MPU and then convert into an artificially
restricted "page size" that the core code will then ignore.
Since the core TCG code can't handle execution from small
MPU regions, we strip the exec permission from them so that
any execution attempts will cause an MPU exception, rather
than allowing it to end up with a cpu_abort() in
get_page_addr_code().
(The previous code's intention was to make any small page be
treated as having no permissions, but unfortunately errors
in the implementation meant that it didn't behave that way.
It's possible that some binaries using small regions were
accidentally working with our old behaviour and won't now.)
We also retain an existing bug, where we ignored the possibility
that the SAU region might not cover the entire page, in the
case of executable regions. This is necessary because some
currently-working guest code images rely on being able to
execute from addresses which are covered by a page-sized
MPU region but a smaller SAU region. We can remove this
workaround if we ever support execution from small regions.
Backports commit 720424359917887c926a33d248131fbff84c9c28 from qemu
We want to handle small MPU region sizes for ARMv7M. To do this,
make get_phys_addr_pmsav7() set the page size to the region
size if it is less that TARGET_PAGE_SIZE, rather than working
only in TARGET_PAGE_SIZE chunks.
Since the core TCG code con't handle execution from small
MPU regions, we strip the exec permission from them so that
any execution attempts will cause an MPU exception, rather
than allowing it to end up with a cpu_abort() in
get_page_addr_code().
(The previous code's intention was to make any small page be
treated as having no permissions, but unfortunately errors
in the implementation meant that it didn't behave that way.
It's possible that some binaries using small regions were
accidentally working with our old behaviour and won't now.)
Backports commit e5e40999b5e03567ef654546e3d448431643f8f3 from qemu
Depending on the host abi, float16, aka uint16_t, values are
passed and returned either zero-extended in the host register
or with garbage at the top of the host register.
The tcg code generator has so far been assuming garbage, as that
matches the x86 abi, but this is incorrect for other host abis.
Further, target/arm has so far been assuming zero-extended results,
so that it may store the 16-bit value into a 32-bit slot with the
high 16-bits already clear.
Rectify both problems by mapping "f16" in the helper definition
to uint32_t instead of (a typedef for) uint16_t. This forces
the host compiler to assume garbage in the upper 16 bits on input
and to zero-extend the result on output.
Backports commit 6c2be133a7478e443c99757b833d0f265c48e0a6 from qemu
This is a preparation for the coming feature of creating dynamically an XML
description for the ARM sysregs.
Add "_S" suffix to the secure version of sysregs that have both S and NS views
Replace (S) and (NS) by _S and _NS for the register that are manually defined,
so all the registers follow the same convention.
Backports commit 9c513e786d85cc58b8ba56a482566f759e0835b6 from qemu
This is a preparation for the coming feature of creating dynamically an XML
description for the ARM sysregs.
A register has ARM_CP_NO_GDB enabled will not be shown in the dynamic XML.
This bit is enabled automatically when creating CP_ANY wildcard aliases.
This bit could be enabled manually for any register we want to remove from the
dynamic XML description.
Backports commit 1f16378718fa87d63f70d0797f4546a88d8e3dd7 from qemu
The ARM ARM specifies FZ16 is suppressed for conversions. Rather than
pushing this logic into the softfloat code we can simply save the FZ
state and temporarily disable it for the softfloat call.
Backports commit 0acb9e7cb341cd767e39ec0875c8706eb2f1c359 from qemu
Instead of passing env and leaving it up to the helper to get the
right fpstatus we pass it explicitly. There was already a get_fpstatus
helper for neon for the 32 bit code. We also add an get_ahp_flag() for
passing the state of the alternative FP16 format flag. This leaves
scope for later tracking the AHP state in translation flags.
Backports commit 486624fcd3eaca6165ab8401d73bbae6c0fb81c1 from qemu
The instruction "ucvtf v0.4h, v04h, #2", with input 0x8000u,
overflows the intermediate float16 to infinity before we have a
chance to scale the output. Use float64 as the intermediate type
so that no input argument (uint32_t in this case) can overflow
or round before scaling. Given the declared argument, the signed
int32_t function has the same problem.
When converting from float16 to integer, using u/int32_t instead
of u/int16_t means that the bounding is incorrect.
Backports commit 88808a022c06f98d81cd3f2d105a5734c5614839 from qemu
The duplication of id_tlbtr_reginfo was unintentionally added within
3281af8114c6b8ead02f08b58e3c36895c1ea047 which should have been
id_mpuir_reginfo.
The effect was that for OMAP and StrongARM CPUs we would
incorrectly UNDEF writes to MPUIR rather than NOPing them.
Backports commit 100061121c1f69a672ce7bb3e9e3781f8018f9f6 from qemu
This is a bug fix to ensure 64-bit reads of these registers don't read
adjacent data.
Backports commit e4e91a217c17fff4045dd4b423cdcb471b3d6a0e from qemu
Because the design of the PMU requires that the counter values be
converted between their delta and guest-visible forms for mode
filtering, an additional hook which occurs before the EL is changed is
necessary.
Backports commit b5c53d1b3886387874f8c8582b205aeb3e4c3df6 from qemu
In commit 95695effe8caa552b8f2 we changed the v7M/v8M stack
pop code to use a new v7m_stack_read() function that checks
whether the read should fail due to an MPU or bus abort.
We missed one call though, the one which reads the signature
word for the callee-saved register part of the frame.
Correct the omission.
Backports commit 4818bad98c8212fbbb0525d10761b6b65279ab92 from qemu
Remove a stale TODO comment -- we have now made the arm_ldl_ptw()
and arm_ldq_ptw() functions propagate physical memory read errors
out to their callers.
Backports commit 145772707fe80395b87c244ccf5699a756f1946b from qemu
Currently our PMSAv7 and ARMv7M MPU implementation cannot handle
MPU region sizes smaller than our TARGET_PAGE_SIZE. However we
report that in a slightly confusing way:
DRSR[3]: No support for MPU (sub)region alignment of 9 bits. Minimum is 10
The problem is not the alignment of the region, but its size;
tweak the error message to say so:
DRSR[3]: No support for MPU (sub)region size of 512 bytes. Minimum is 1024.
Backports commit 8aec759b45fa6986c0b159cb27353d6abb0d5d73 from qemu
Now that we have a helper function specifically for the BRK and
BKPT instructions, we can set the exception.fsr there rather
than in arm_cpu_do_interrupt_aarch32(). This allows us to
use our new arm_debug_exception_fsr() helper.
In particular this fixes a bug where we were hardcoding the
short-form IFSR value, which is wrong if the target exception
level has LPAE enabled.
Fixes: https://bugs.launchpad.net/qemu/+bug/1756927
Backports commit 62b94f31d0df75187bb00684fc29e8639eacc0c5 from qemu
Backports commits 2994fd96d986578a342f2342501b4ad30f6d0a85,
701e3c78ce45fa630ffc6826c4b9a4218954bc7f, and
d1853231c60d16af78cf4d1608d043614bfbac0b from qemuu
Much like recpe the ARM ARM has simplified the pseudo code for the
calculation which is done on a fixed point 9 bit integer maths. So
while adding f16 we can also clean this up to be a little less heavy
on the floating point and just return the fractional part and leave
the calle's to do the final packing of the result.
Backports commit d719cbc7641991d16b891ffbbfc3a16a04e37b9a from qemu
Also removes a load of symbols that seem unnecessary from the header_gen script
It looks like the ARM ARM has simplified the pseudo code for the
calculation which is done on a fixed point 9 bit integer maths. So
while adding f16 we can also clean this up to be a little less heavy
on the floating point and just return the fractional part and leave
the calle's to do the final packing of the result.
Backports commit 5eb70735af1c0b607bf2671a53aff3710cc1672f from qemu
As the rounding mode is now split between FP16 and the rest of
floating point we need to be explicit when tweaking it. Instead of
passing the CPU env we now pass the appropriate fpst pointer directly.
Backports commit 9b04991686785e18b18a36d193b68f08f7c91648 from qemu
Half-precision flush to zero behaviour is controlled by a separate
FZ16 bit in the FPCR. To handle this we pass a pointer to
fp_status_fp16 when working on half-precision operations. The value of
the presented FPCR is calculated from an amalgam of the two when read.
Backports commit d81ce0ef2c4f1052fcdef891a12499eca3084db7 from qemu
The register definitions for VMIDR and VMPIDR have separate
reginfo structs for the AArch32 and AArch64 registers. However
the 32-bit versions are wrong:
* they use offsetof instead of offsetoflow32 to mark where
the 32-bit value lives in the uint64_t CPU state field
* they don't mark themselves as ARM_CP_ALIAS
In particular this means that if you try to use an Arm guest CPU
which enables EL2 on a big-endian host it will assert at reset:
target/arm/cpu.c:114: cp_reg_check_reset: Assertion `oldvalue == newvalue' failed.
because the reset of the 32-bit register writes to the top
half of the uint64_t.
Correct the errors in the structures.
Backports commit 36476562d57a3b64bbe86db26e63677dd21907c5 from qemu
As cpu.h is another typically widely included file which doesn't need
full access to the softfloat API we can remove the includes from here
as well. Where they do need types it's typically for float_status and
the rounding modes so we move that to softfloat-types.h as well.
As a result of not having softfloat in every cpu.h call we now need to
add it to various helpers that do need the full softfloat.h
definitions.
Backports commit 24f91e81b65fcdd0552d1f0fcb0ea7cfe3829c19 from qemu
The v8M architecture includes hardware support for enforcing
stack pointer limits. We don't implement this behaviour yet,
but provide the MSPLIM and PSPLIM stack pointer limit registers
as reads-as-written, so that when we do implement the checks
in future this won't break guest migration.
Backports commit 57bb31568114023f67680d6fe478ceb13c51aa7d from qemu
In commit 50f11062d4c896 we added support for MSR/MRS access
to the NS banked special registers, but we forgot to implement
the support for writing to CONTROL_NS. Correct the omission.
Backports commit 6eb3a64e2a96f5ced1f7896042b01f002bf0a91f from qemu
Handle possible MPU faults, SAU faults or bus errors when
popping register state off the stack during exception return.
Backports commit 95695effe8caa552b8f243bceb3a08de4003c882 from qemu
Make the load of the exception vector from the vector table honour
the SAU and any bus error on the load (possibly provoking a derived
exception), rather than simply aborting if the load fails.
Backports commit 600c33f24752a00e81e9372261e35c2befea612b from qemu
Make v7m_push_callee_stack() honour the MPU by using the
new v7m_stack_write() function. We return a flag to indicate
whether the pushes failed, which we can then use in
v7m_exception_taken() to cause us to handle the derived
exception correctly.
Backports commit 65b4234ff73a4d4865438ce30bdfaaa499464efa from qemu
The memory writes done to push registers on the stack
on exception entry in M profile CPUs are supposed to
go via MPU permissions checks, which may cause us to
take a derived exception instead of the original one of
the MPU lookup fails. We were implementing these as
always-succeeds direct writes to physical memory.
Rewrite v7m_push_stack() to do the necessary checks.
Backports commit fd592d890ec40e3686760de84044230a8ebb1eb3 from qemu
In the v8M architecture, if the process of taking an exception
results in a further exception this is called a derived exception
(for example, an MPU exception when writing the exception frame to
memory). If the derived exception happens while pushing the initial
stack frame, we must ignore any subsequent possible exception
pushing the callee-saves registers.
In preparation for making the stack writes check for exceptions,
add a return value from v7m_push_stack() and a new parameter to
v7m_exception_taken(), so that the former can tell the latter that
it needs to ignore failures to write to the stack. We also plumb
the argument through to v7m_push_callee_stack(), which is where
the code to ignore the failures will be.
(Note that the v8M ARM pseudocode structures this slightly differently:
derived exceptions cause the attempt to process the original
exception to be abandoned; then at the top level it calls
DerivedLateArrival to prioritize the derived exception and call
TakeException from there. We choose to let the NVIC do the prioritization
and continue forward with a call to TakeException which will then
take either the original or the derived exception. The effect is
the same, but this structure works better for QEMU because we don't
have a convenient top level place to do the abandon-and-retry logic.)
Backports commit 0094ca70e165cfb69882fa2e100d935d45f1c983 from qemu
Currently armv7m_nvic_acknowledge_irq() does three things:
* make the current highest priority pending interrupt active
* return a bool indicating whether that interrupt is targeting
Secure or NonSecure state
* implicitly tell the caller which is the highest priority
pending interrupt by setting env->v7m.exception
We need to split these jobs, because v7m_exception_taken()
needs to know whether the pending interrupt targets Secure so
it can choose to stack callee-saves registers or not, but it
must not make the interrupt active until after it has done
that stacking, in case the stacking causes a derived exception.
Similarly, it needs to know the number of the pending interrupt
so it can read the correct vector table entry before the
interrupt is made active, because vector table reads might
also cause a derived exception.
Create a new armv7m_nvic_get_pending_irq_info() function which simply
returns information about the highest priority pending interrupt, and
use it to rearrange the v7m_exception_taken() code so we don't
acknowledge the exception until we've done all the things which could
possibly cause a derived exception.
Backports part of commit 6c9485188170e11ad31ce477c8ce200b8e8ce59d from qemu
Commit ("3b39d734141a target/arm: Handle page table walk load failures
correctly") modified both versions of the page table walking code (i.e.,
arm_ldl_ptw and arm_ldq_ptw) to record the result of the translation in
a temporary 'data' variable so that it can be inspected before being
returned. However, arm_ldq_ptw() returns an uint64_t, and using a
temporary uint32_t variable truncates the upper bits, corrupting the
result. This causes problems when using more than 4 GB of memory in
a TCG guest. So use a uint64_t instead.
Backports commit 9aea1ea31af25fe344a88da086ff913cca09c667 from qemu
Instead of ignoring the response from address_space_ld*()
(indicating an attempt to read a page table descriptor from
an invalid physical address), use it to report the failure
correctly.
Since this is another couple of locations where we need to
decide the value of the ARMMMUFaultInfo ea bit based on a
MemTxResult, we factor out that operation into a helper
function.
Backports commit 3b39d734141a71296d08af3d4c32f872fafd782e from qemu
For PMSAv7, the v7A/R Arm ARM defines that setting AP to 0b111
is an UNPREDICTABLE reserved combination. However, for v7M
this value is documented as having the same behaviour as 0b110:
read-only for both privileged and unprivileged. Accept this
value on an M profile core rather than treating it as a guest
error and a no-access page.
Backports commit 8638f1ad7403b63db880dadce38e6690b5d82b64 from qemu
Now that do_ats_write() is entirely in control of whether to
generate a 32-bit PAR or a 64-bit PAR, we can make it use the
correct (complicated) condition for doing so.
Backports commit 1313e2d7e2cd8b21741e0cf542eb09dfc4188f79 from qemu
All of the callers of get_phys_addr() and arm_tlb_fill() now ignore
the FSR values they return, so we can just remove the argument
entirely.
Backports commit bc52bfeb3be2052942b7dac8ba284f342ac9605b from qemu
In do_ats_write(), rather than using the FSR value from get_phys_addr(),
construct the PAR values using the information in the ARMMMUFaultInfo
struct. This allows us to create a PAR of the correct format regardless
of what the translation table format is.
For the moment we leave the condition for "when should this be a
64 bit PAR" as it was previously; this will need to be fixed to
properly support AArch32 Hyp mode.
Backports commit 5efe9ed45dec775ebe91ce72bd805ee780d16064 from qemu
Make get_phys_addr_pmsav8() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Backports commit 3f551b5b7380ff131fe22944aa6f5b166aa13caf from qemu
Make get_phys_addr_pmsav7() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Backports commit 9375ad15338b24e06109071ac3a85df48a2cc2e6 from qemu
Make get_phys_addr_pmsav5() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Note that PMSAv5 does not define any guest-visible fault status
register, so the different "fsr" values we were previously
returning are entirely arbitrary. So we can just switch to using
the most appropriae fi->type values without worrying that we
need to special-case FaultInfo->FSC conversion for PMSAv5.
Backports commit 53a4e5c5b07b2f50c538511b74b0d3d4964695ea from qemu
Make get_phys_addr_v6() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Backports commit da909b2c23a68e57bbcb6be98229e40df606f0c8 from qemu
Make get_phys_addr_v6() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Backports commit f06cf243945ccb24cb9578304306ae7fcb4cf3fd from qemu
Make get_phys_addr_v5() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Backports commit f989983e8dc9be6bc3468c6dbe46fcb1501a740c from qemu
All the callers of arm_ldq_ptw() and arm_ldl_ptw() ignore the value
that those functions store in the fsr argument on failure: if they
return failure to their callers they will always overwrite the fsr
value with something else.
Remove the argument from these functions and S1_ptw_translate().
This will simplify removing fsr from the calling functions.
Backports commit 3795a6de9f7ec4a7e3dcb8bf02a88a014147b0b0 from qemu
Implement the TT instruction which queries the security
state and access permissions of a memory location.
Backports commit 5158de241b0fb344a6c948dfcbc4e611ab5fafbe from qemu
For the TT instruction we're going to need to do an MPU lookup that
also tells us which MPU region the access hit. This requires us
to do the MPU lookup without first doing the SAU security access
check, so pull the MPU lookup parts of get_phys_addr_pmsav8()
out into their own function.
The TT instruction also needs to know the MPU region number which
the lookup hit, so provide this information to the caller of the
MPU lookup code, even though get_phys_addr_pmsav8() doesn't
need to know it.
Backports commit 54317c0ff3a3c0f6b2c3a1d3c8b5d93686a86d24 from qemu
For M profile, we currently have an mmu index MNegPri for
"requested execution priority negative". This fails to
distinguish "requested execution priority negative, privileged"
from "requested execution priority negative, usermode", but
the two can return different results for MPU lookups. Fix this
by splitting MNegPri into MNegPriPriv and MNegPriUser, and
similarly for the Secure equivalent MSNegPri.
This takes us from 6 M profile MMU modes to 8, which means
we need to bump NB_MMU_MODES; this is OK since the point
where we are forced to reduce TLB sizes is 9 MMU modes.
(It would in theory be possible to stick with 6 MMU indexes:
{mpu-disabled,user,privileged} x {secure,nonsecure} since
in the MPU-disabled case the result of an MPU lookup is
always the same for both user and privileged code. However
we would then need to rework the TB flags handling to put
user/priv into the TB flags separately from the mmuidx.
Adding an extra couple of mmu indexes is simpler.)
Backports commit 62593718d77c06ad2b5e942727cead40775d2395 from qemu
When we added the ARMMMUIdx_MSUser MMU index we forgot to
add it to the case statement in regime_is_user(), so we
weren't treating it as unprivileged when doing MPU lookups.
Correct the omission.
Backports commit 871bec7c44a453d9cab972ce1b5d12e1af0545ab from qemu
In ARMv7M the CPU ignores explicit writes to CONTROL.SPSEL
in Handler mode. In v8M the behaviour is slightly different:
writes to the bit are permitted but will have no effect.
We've already done the hard work to handle the value in
CONTROL.SPSEL being out of sync with what stack pointer is
actually in use, so all we need to do to fix this last loose
end is to update the condition we use to guard whether we
call write_v7m_control_spsel() on the register write.
Backports commit 83d7f86d3d27473c0aac79c1baaa5c2ab01b02d9 from qemu
For v8M it is possible for the CONTROL.SPSEL bit value and the
current stack to be out of sync. This means we need to update
the checks used in reads and writes of the PSP and MSP special
registers to use v7m_using_psp() rather than directly checking
the SPSEL bit in the control register.
Backports commit 1169d3aa5b19adca9384d954d80e1f48da388284 from qemu
In do_ats_write(), rather than using extended_addresses_enabled() to
decide whether the value we get back from get_phys_addr() is a 64-bit
format PAR or a 32-bit one, use arm_s1_regime_using_lpae_format().
This is not really the correct answer, because the PAR format
depends on the AT instruction being used, not just on the
translation regime. However getting this correct requires a
significant refactoring, so that get_phys_addr() returns raw
information about the fault which the caller can then assemble
into a suitable FSR/PAR/syndrome for its purposes, rather than
get_phys_addr() returning a pre-formatted FSR.
However this change at least improves the situation by making
the PAR work correctly for address translation operations done
at AArch64 EL2 on the EL2 translation regime. In particular,
this is necessary for Xen to be able to run in our emulation,
so this seems like a safer interim fix given that we are in freeze.
Backports commit 50cd71b0d347c74517dcb7da447fe657fca57d9c from qemu
The CPU ID registers ID_AA64PFR0_EL1, ID_PFR1_EL1 and ID_PFR1
have a field for reporting presence of GICv3 system registers.
We need to report this field correctly in order for Xen to
work as a guest inside QEMU emulation. We mustn't incorrectly
claim the sysregs exist when they don't, though, or Linux will
crash.
Unfortunately the way we've designed the GICv3 emulation in QEMU
puts the system registers as part of the GICv3 device, which
may be created after the CPU proper has been realized. This
means that we don't know at the point when we define the ID
registers what the correct value is. Handle this by switching
them to calling a function at runtime to read the value, where
we can fill in the GIC field appropriately.
Backports commit 96a8b92ed8f02d5e86ad380d3299d9f41f99b072 from qemu
On a successful address translation instruction, PAR is supposed to
contain cacheability and shareability attributes determined by the
translation. We previously returned 0 for these bits (in line with the
general strategy of ignoring caches and memory attributes), but some
guest OSes may depend on them.
This patch collects the attribute bits in the page-table walk, and
updates PAR with the correct attributes for all LPAE translations.
Short descriptor formats still return 0 for these bits, as in the
prior implementation.
Backports commit 5b2d261d60caf9d988d91ca1e02392d6fc8ea104 from qemu
Secure function return happens when a non-secure function has been
called using BLXNS and so has a particular magic LR value (either
0xfefffffe or 0xfeffffff). The function return via BX behaves
specially when the new PC value is this magic value, in the same
way that exception returns are handled.
Adjust our BX excret guards so that they recognize the function
return magic number as well, and perform the function-return
unstacking in do_v7m_exception_exit().
Backports commit d02a8698d7ae2bfed3b11fe5b064cb0aa406863b from qemu
Implement the SG instruction, which we emulate 'by hand' in the
exception handling code path.
Backports commit 333e10c51ef5876ced26f77b61b69ce0f83161a9 from qemu
Implement the security attribute lookups for memory accesses
in the get_phys_addr() functions, causing these to generate
various kinds of SecureFault for bad accesses.
The major subtlety in this code relates to handling of the
case when the security attributes the SAU assigns to the
address don't match the current security state of the CPU.
In the ARM ARM pseudocode for validating instruction
accesses, the security attributes of the address determine
whether the Secure or NonSecure MPU state is used. At face
value, handling this would require us to encode the relevant
bits of state into mmu_idx for both S and NS at once, which
would result in our needing 16 mmu indexes. Fortunately we
don't actually need to do this because a mismatch between
address attributes and CPU state means either:
* some kind of fault (usually a SecureFault, but in theory
perhaps a UserFault for unaligned access to Device memory)
* execution of the SG instruction in NS state from a
Secure & NonSecure code region
The purpose of SG is simply to flip the CPU into Secure
state, so we can handle it by emulating execution of that
instruction directly in arm_v7m_cpu_do_interrupt(), which
means we can treat all the mismatch cases as "throw an
exception" and we don't need to encode the state of the
other MPU bank into our mmu_idx values.
This commit doesn't include the actual emulation of SG;
it also doesn't include implementation of the IDAU, which
is a per-board way to specify hard-coded memory attributes
for addresses, which override the CPU-internal SAU if they
specify a more secure setting than the SAU is programmed to.
Backports commit 35337cc391245f251bfb9134f181c33e6375d6c1 from qemu
Add support for v8M and in particular the security extension
to the exception entry code. This requires changes to:
* calculation of the exception-return magic LR value
* push the callee-saves registers in certain cases
* clear registers when taking non-secure exceptions to avoid
leaking information from the interrupted secure code
* switch to the correct security state on entry
* use the vector table for the security state we're targeting
Backports commit d3392718e1fcf0859fb7c0774a8e946bacb8419c from qemu
For v8M, exceptions from Secure to Non-Secure state will save
callee-saved registers to the exception frame as well as the
caller-saved registers. Add support for unstacking these
registers in exception exit when necessary.
Backports commit 907bedb3f3ce134c149599bd9cb61856d811b8ca from qemu
