The functions eliminate duplication of the special cases for
this operation. They match up with the GVecGen2iFn typedef.
Add out-of-line helpers. We got away with only having inline
expanders because the neon vector size is only 16 bytes, and
we know that the inline expansion will always succeed.
When we reuse this for SVE, tcg-gvec-op may decide to use an
out-of-line helper due to longer vector lengths.
Backports commit 631e565450c483e0622eec3d8b61d7fa41d16bca from qemu
Add a version of tcg_gen_dup_* that takes both immediate and
a vector element size operand. This will replace the set of
tcg_gen_gvec_dup{8,16,32,64}i functions that encode the element
size within the function name.
Backports commit 44c94677febd15488f9190b11eaa4a08e8ac696b from qemu
Make cpu_register() (renamed to arm_cpu_register()) available
from internals.h so we can register CPUs also from other files
in the future.
Backports commit 37bcf244454f4efb82e2c0c64bbd7eabcc165a0c from qemu
These instructions are often used in glibc's string routines.
They were the final uses of the 32-bit at a time neon helpers.
Backports commit 6b375d3546b009d1e63e07397ec9c6af256e15e9 from qemu
We still need two different helpers, since NEON and SVE2 get the
inputs from different locations within the source vector. However,
we can convert both to the same internal form for computation.
The sve2 helper is not used yet, but adding it with this patch
helps illustrate why the neon changes are helpful.
Backports commit e7e96fc5ec8c79dc77fef522d5226ac09f684ba5 from qemu
The gvec form will be needed for implementing SVE2.
Extend the implementation to operate on uint64_t instead of uint32_t.
Use a counted inner loop instead of terminating when op1 goes to zero,
looking toward the required implementation for ARMv8.4-DIT.
Backports commit a21bb78e5817be3f494922e1dadd6455fe5d6318 from qemu
These instructions shift left or right depending on the sign
of the input, and 7 bits are significant to the shift. This
requires several masks and selects in addition to the actual
shifts to form the complete answer.
That said, the operation is still a small improvement even for
two 64-bit elements -- 13 vector operations instead of 2 * 7
integer operations.
Backports commit 87b74e8b6edd287ea2160caa0ebea725fa8f1ca1 from qemu
Add an option to trigger memory writeback to sync given memory region
with the corresponding backing store, case one is available.
This extends the support for persistent memory, allowing syncing on-demand.
Backports commit 61c490e25e081af39ff40556f6c1229b8b011585 from qemu
The raising of exceptions from check_watchpoint, buried inside
of the I/O subsystem, is fundamentally broken. We do not have
the helper return address with which we can unwind guest state.
Replace PHYS_SECTION_WATCH and io_mem_watch with TLB_WATCHPOINT.
Move the call to cpu_check_watchpoint into the cputlb helpers
where we do have the helper return address.
This allows watchpoints on RAM to bypass the full i/o access path.
Backports commit 50b107c5d617eaf93301cef20221312e7a986701 from qemu
Preparation for collapsing the two byte swaps adjust_endianness and
handle_bswap into the former.
Call memory_region_dispatch_{read|write} with endianness encoded into
the "MemOp op" operand.
This patch does not change any behaviour as
memory_region_dispatch_{read|write} is yet to handle the endianness.
Once it does handle endianness, callers with byte swaps can collapse
them into adjust_endianness.
Backports commit d5d680cacc66ef7e3c02c81dc8f3a34eabce6dfe from qemu
HCR_EL2.TID3 requires that AArch32 reads of MVFR[012] are trapped to
EL2, and HCR_EL2.TID0 does the same for reads of FPSID.
In order to handle this, introduce a new TCG helper function that
checks for these control bits before executing the VMRC instruction.
Tested with a hacked-up version of KVM/arm64 that sets the control
bits for 32bit guests.
Backports commit 9ca1d776cb49c09b09579d9edd0447542970c834 from qemu
Replace x = double_saturate(y) with x = add_saturate(y, y).
There is no need for a separate more specialized helper.
Backports commit 640581a06d14e2d0d3c3ba79b916de6bc43578b0 from qemu
Perform a per-element conditional move. This combination operation is
easier to implement on some host vector units than plain cmp+bitsel.
Omit the usual gvec interface, as this is intended to be used by
target-specific gvec expansion call-backs.
Backports commit f75da2988eb2457fa23d006d573220c5c680ec4e from qemu
This operation performs d = (b & a) | (c & ~a), and is present
on a majority of host vector units. Include gvec expanders.
Backports commit 38dc12947ec9106237f9cdbd428792c985cd86ae from qemu
We can now use the CPUClass hook instead of a named function.
Create a static tlb_fill function to avoid other changes within
cputlb.c. This also isolates the asserts within. Remove the
named tlb_fill function from all of the targets.
Backports commit c319dc13579a92937bffe02ad2c9f1a550e73973 from qemu
Remove a function of the same name from target/arm/.
Use a branchless implementation of abs gleaned from gcc.
Backports commit ff1f11f7f8710a768f9313f24bd7f509d3db27e5 from qemu
Allow expansion either via shift by scalar or by replicating
the scalar for shift by vector.
Backports commit b4578cd91cda4cef1c413304353ca6dc5b957b60 from qemu
The gvec expanders perform a modulo on the shift count. If the target
requires alternate behaviour, then it cannot use the generic gvec
expanders anyway, and will have to have its own custom code.
Backports commit 5ee5c14cacda27e904cd6b0d9e7ffe1acff42838 from qemu
Allow the backend to expand dup from memory directly, instead of
forcing the value into a temp first. This is especially important
if integer/vector register moves do not exist.
Note that officially tcg_out_dupm_vec is allowed to fail.
If it did, we could fix this up relatively easily:
VECE == 32/64:
Load the value into a vector register, then dup.
Both of these must work.
VECE == 8/16:
If the value happens to be at an offset such that an aligned
load would place the desired value in the least significant
end of the register, go ahead and load w/garbage in high bits.
Load the value w/INDEX_op_ld{8,16}_i32.
Attempt a move directly to vector reg, which may fail.
Store the value into the backing store for OTS.
Load the value into the vector reg w/TCG_TYPE_I32, which must work.
Duplicate from the vector reg into itself, which must work.
All of which is well and good, except that all supported
hosts can support dupm for all vece, so all of the failure
paths would be dead code and untestable.
Backports commit 37ee55a081b7863ffab2151068dd1b2f11376914 from qemu
Replace the single opcode in .opc with a null-terminated
array in .opt_opc. We still require that all opcodes be
used with the same .vece.
Validate the contents of this list with CONFIG_DEBUG_TCG.
All tcg_gen_*_vec functions will check any list active
during .fniv expansion. Swap the active list in and out
as we expand other opcodes, or take control away from the
front-end function.
Convert all existing vector aware front ends.
Backports commit 53229a7703eeb2bbe101a19a33ef22aaf960c65b from qemu
Let's add tcg_gen_gvec_3i(), similar to tcg_gen_gvec_2i(), however
without introducing "gen_helper_gvec_3i *fnoi", as it isn't needed
for now.
Backports commit e1227bb6e59173117f094a6a13b998587b45c928 from qemu
The M-profile architecture floating point system supports
lazy FP state preservation, where FP registers are not
pushed to the stack when an exception occurs but are instead
only saved if and when the first FP instruction in the exception
handler is executed. Implement this in QEMU, corresponding
to the check of LSPACT in the pseudocode ExecuteFPCheck().
Backports commit e33cf0f8d8c9998a7616684f9d6aa0d181b88803 from qemu
Will be helpful for s390x. Input 128 bit and output 64 bit only,
which is sufficient for now.
Backports commit 2089fcc9e7b4174d1c351eaa7d277c02188a6dd2 from qemu
This ports over the RISC-V architecture from Qemu. This is currently a
very barebones transition. No code hooking or any fancy stuff.
Currently, you can feed it instructions and query the CPU state itself.
This also allows choosing whether or not RISC-V 32-bit or RISC-V 64-bit
is desirable through Unicorn's interface as well.
Extremely basic examples of executing a single instruction have been
added to the samples directory to help demonstrate how to use the basic
functionality.
We do not need an out-of-line helper for manipulating bits in pstate.
While changing things, share the implementation of gen_ss_advance.
Backports commit 22ac3c49641f6eed93dca5b852030b4d3eacf6c4 from qemu
The EL0+UMA check is unique to DAIF. While SPSel had avoided the
check by nature of already checking EL >= 1, the other post v8.0
extensions to MSR (imm) allow EL0 and do not require UMA. Avoid
the unconditional write to pc and use raise_exception_ra to unwind.
Backports commit ff730e9666a716b669ac4a8ca7c521177d1d2b15 from qemu
Note that float16_to_float32 rightly squashes SNaN to QNaN.
But of course pickNaNMulAdd, for ARM, selects SNaNs first.
So we have to preserve SNaN long enough for the correct NaN
to be selected. Thus float16_to_float32_by_bits.
Backports commit a4e943a716d5fac923d82df3eabc65d1e3624019 from qemu
For same-sign saturation, we have tcg vector operations. We can
compute the QC bit by comparing the saturated value against the
unsaturated value.
Backports commit 89e68b575e138d0af1435f11a8ffcd8779c237bd from qemu
A number of CPUID registers are exposed to userspace by modern Linux
kernels thanks to the "ARM64 CPU Feature Registers" ABI. For QEMU's
user-mode emulation we don't need to emulate the kernels trap but just
return the value the trap would have done. To avoid too much #ifdef
hackery we process ARMCPRegInfo with a new helper (modify_arm_cp_regs)
before defining the registers. The modify routine is driven by a
simple data structure which describes which bits are exported and
which are fixed.
Backports commit 6c5c0fec29bbfe36c64eca1edfd8455be46b77c6 from qemu
pmccntr_read and pmccntr_write contained duplicate code that was already
being handled by pmccntr_sync. Consolidate the duplicated code into two
functions: pmccntr_op_start and pmccntr_op_finish. Add a companion to
c15_ccnt in CPUARMState so that we can simultaneously save both the
architectural register value and the last underlying cycle count - this
ensures time isn't lost and will also allow us to access the 'old'
architectural register value in order to detect overflows in later
patches.
Backports commit 5d05b9d462666ed21b7fef61aa45dec9aaa9f0ff from qemu
In commit 8a0fc3a29fc2315325400 we tried to implement HCR_EL2.{VI,VF},
but we got it wrong and had to revert it.
In that commit we implemented them as simply tracking whether there
is a pending virtual IRQ or virtual FIQ. This is not correct -- these
bits cause a software-generated VIRQ/VFIQ, which is distinct from
whether there is a hardware-generated VIRQ/VFIQ caused by the
external interrupt controller. So we need to track separately
the HCR_EL2 bit state and the external virq/vfiq line state, and
OR the two together to get the actual pending VIRQ/VFIQ state.
Fixes: 8a0fc3a29fc2315325400c738f807d0d4ae0ab7f
Backports commit 89430fc6f80a5aef1d4cbd6fc26b40c30793786c from qemu
