Not that there are any stores involved, but why argue with ARM's
naming convention.
Backports commit bd889f4810839a2b68e339696ccf7c406cd62879 from qemu
Now properly signals unallocated for REV64 with SF=0.
Allows for the opcode2 field to be decoded shortly.
Backports commit 18de2813c35e359621a24a0a2a77570e83cb73b9 from qemu
There are 5 bits of state that could be added, but to save
space within tbflags, add only a single enable bit.
Helpers will determine the rest of the state at runtime.
Backports commit 0816ef1bfcd3ac53e7454b62ca436727887f6056 from qemu
Use "register" TBFLAG_ANY to indicate shared state between
A32 and A64, and "registers" TBFLAG_A32 & TBFLAG_A64 for
fields that are specific to the given cpu state.
Move ARM_TBFLAG_BE_DATA to shared state, instead of its current
placement within "Bit usage when in AArch32 state".
Backports commit aad821ac4faad369fad8941d25e59edf2514246b from qemu
Provide a trivial implementation with zero limited ordering regions,
which causes the LDLAR and STLLR instructions to devolve into the
LDAR and STLR instructions from the base ARMv8.0 instruction set.
Backports commit 2d7137c10fafefe40a0a049ff8a7bd78b66e661f from qemu
In handle_vec_simd_shli() we have a check:
if (size > 3 && !is_q) {
unallocated_encoding(s);
return;
}
However this can never be true, because we calculate
int size = 32 - clz32(immh) - 1;
where immh is a 4 bit field which we know cannot be all-zeroes.
So the clz32() return must be in {28,29,30,31} and the resulting
size is in {0,1,2,3}, and "size > 3" is never true.
This unnecessary code confuses Coverity's analysis:
in CID 1396476 it thinks we might later index off the
end of an array because the condition implies that we
might have a size > 3.
Remove the code, and instead assert that the size is in [0..3],
since the decode that enforces that is somewhat distant from
this function.
Backports commit f6c98f91f56031141a47f86225fdc30f0f9f84fb from qemu
For a sequence of loads or stores from a single register,
little-endian operations can be promoted to an 8-byte op.
This can reduce the number of operations by a factor of 8.
Backports commit 87f9a7f0c8d5122c36743885158782c2348a6d21 from qemu
This can reduce the number of opcodes required for certain
complex forms of load-multiple (e.g. ld4.16b).
Backports commit a7d8143aed2268f147cc1abfebc848ed6282a313 from qemu
Most of the v8 extensions are self-contained within the ISAR
registers and are not implied by other feature bits, which
makes them the easiest to convert.
Backports commit 962fcbf2efe57231a9f5df0ae0f40c05e35628ba from qemu
Use the existing helpers to determine if (1) the fpu is enabled,
(2) sve state is enabled, and (3) the current sve vector length.
Backports commit ced3155141755ba244c988c72c4bde32cc819670 from qemu
These insns require u=1; failed to include that in the switch
cases. This probably happened during one of the rebases just
before final commit.
Fixes: d17b7cdcf4e
Backports commit b8a4a96db3639e17ab5e5cdc14fca4b19fbf5b3b from qemu
Also fold the FPCR/FPSR state onto the same line as PSTATE,
and mention but do not dump disabled FPU state.
Backports commit 2bf5f3f91bb4e3faa2a19aec042138a938afbf6a from qemu
Leave ARM_CP_SVE, removing ARM_CP_FPU; the sve_access_check
produced by the flag already includes fp_access_check. If
we also check ARM_CP_FPU the double fp_access_check asserts.
Backports commit 11d7870b1b4d038d7beb827f3afa72e284701351 from qemu
We've already added the helpers with an SVE patch, all that remains
is to wire up the aa64 and aa32 translators. Enable the feature
within -cpu max for CONFIG_USER_ONLY.
Backports commit 26c470a7bb4233454137de1062341ad48947f252 from qemu
For aa64 advsimd, we had been passing the pre-indexed vector.
However, sve applies the index to each 128-bit segment, so we
need to pass in the index separately.
For aa32 advsimd, the fp32 operation always has index 0, but
we failed to interpret the fp16 index correctly.
Backports commit 2cc99919a81a62589a4a6b0f365eabfead1db1a7 from qemu
Do the cast to uintptr_t within the helper, so that the compiler
can type check the pointer argument. We can also do some more
sanity checking of the index argument.
Backports commit 07ea28b41830f946de3841b0ac61a3413679feb9 from qemu
Including only 4, as-yet unimplemented, instruction patterns
so that the whole thing compiles.
Backports commit 38388f7ee3adc04a7e7246c04352451c4f8d00fb from qemu
Instead of passing env and leaving it up to the helper to get the
right fpstatus we pass it explicitly. There was already a get_fpstatus
helper for neon for the 32 bit code. We also add an get_ahp_flag() for
passing the state of the alternative FP16 format flag. This leaves
scope for later tracking the AHP state in translation flags.
Backports commit 486624fcd3eaca6165ab8401d73bbae6c0fb81c1 from qemu
All the hard work is already done by vfp_expand_imm, we just need to
make sure we pick up the correct size.
Backports commit 6ba28ddb9be37bdb67e3e38007a53ccbdcd010df from qemu
Use write_fp_dreg and clear_vec_high to zero the bits
that need zeroing for these cases.
Backports commit 9a9f1f59521f46e8ff4527d9a2b52f83577e2aa3 from qemu
The instruction "ucvtf v0.4h, v04h, #2", with input 0x8000u,
overflows the intermediate float16 to infinity before we have a
chance to scale the output. Use float64 as the intermediate type
so that no input argument (uint32_t in this case) can overflow
or round before scaling. Given the declared argument, the signed
int32_t function has the same problem.
When converting from float16 to integer, using u/int32_t instead
of u/int16_t means that the bounding is incorrect.
Backports commit 88808a022c06f98d81cd3f2d105a5734c5614839 from qemu
While we have some of the scalar paths for FCVT for fp16,
we failed to decode the fp16 version of these instructions.
Backports commit d0ba8e74acd299b092786ffc30b306638d395a9e from qemu
While we have some of the scalar paths for *CVF for fp16,
we failed to decode the fp16 version of these instructions.
Backports commit a6117fae4576edfe7a5a5b802a742c33112c0993 from qemu
This implements all of the v8.1-Atomics instructions except
for compare-and-swap, which is decoded elsewhere.
Backports commit 74608ea45434c9b07055b21885e093528c5ed98c from qemu
The insns in the ARMv8.1-Atomics are added to the existing
load/store exclusive and load/store reg opcode spaces.
Rearrange the top-level decoders for these to accomodate.
The Atomics insns themselves still generate Unallocated.
Backports commit 68412d2ecedbab5a43b0d346cddb27e00d724aff from qemu
While at it, use int for both num_insns and max_insns to make
sure we have same-type comparisons.
Backports commit b542683d77b4f56cef0221b267c341616d87bce9 from qemu
Path analysis shows that size == 3 && !is_q has been eliminated.
Fixes: Coverity CID1385853
Backports commit a8766e3172c1671cab297c1ef4566a3c5d094822 from qemu
The (size > 3 && !is_q) condition is identical to the preceeding test
of bit 3 in immh; eliminate it. For the benefit of Coverity, assert
that size is within the bounds we expect.
Fixes: Coverity CID1385846
Fixes: Coverity CID1385849
Fixes: Coverity CID1385852
Fixes: Coverity CID1385857
Backports commit 8dae46970532afcf93470b00e83ca9921980efc3 from qemu
The MDCR_EL2.TDE bit allows the exception level targeted by debug
exceptions to be set to EL2 for code executing at EL0. We handle
this in the arm_debug_target_el() function, but this is only used for
hardware breakpoint and watchpoint exceptions, not for the exception
generated when the guest executes an AArch32 BKPT or AArch64 BRK
instruction. We don't have enough information for a translate-time
equivalent of arm_debug_target_el(), so instead make BKPT and BRK
call a special purpose helper which can do the routing, rather than
the generic exception_with_syndrome helper.
Backports commit c900a2e62dd6dde11c8f5249b638caad05bb15be from qemu
In OE project 4.15 linux kernel boot hang was observed under
single cpu aarch64 qemu. Kernel code was in a loop waiting for
vtimer arrival, spinning in TC generated blocks, while interrupt
was pending unprocessed. This happened because when qemu tried to
handle vtimer interrupt target had interrupts disabled, as
result flag indicating TCG exit, cpu->icount_decr.u16.high,
was cleared but arm_cpu_exec_interrupt function did not call
arm_cpu_do_interrupt to process interrupt. Later when target
reenabled interrupts, it happened without exit into main loop, so
following code that waited for result of interrupt execution
run in infinite loop.
To solve the problem instructions that operate on CPU sys state
(i.e enable/disable interrupt), and marked as DISAS_UPDATE,
should be considered as DISAS_EXIT variant, and should be
forced to exit back to main loop so qemu will have a chance
processing pending CPU state updates, including pending
interrupts.
This change brings consistency with how DISAS_UPDATE is treated
in aarch32 case.
Backports commit a75a52d62418dafe462be4fe30485501d1010bb9 from qemu
The integer size check was already outside of the opcode switch;
move the floating-point size check outside as well. Unify the
size vs index adjustment between fp and integer paths.
Backports commit 449f264b1749ac0e59c58bbc2eacdb3dc302c2bf from qemu
This includes FMOV, FABS, FNEG, FSQRT and FRINT[NPMZAXI]. We re-use
existing helpers to achieve this.
Backports commit c2c08713a6a5846bbe601d4d1b4f9708ba77efdc from qemu
This covers the encoding group:
Advanced SIMD scalar three same FP16
As all the helpers are already there it is simply a case of calling the
existing helpers in the scalar context.
Backports commit 7c93b7741b29b3ffda81a6e9525771b4409db99f from qemu
I only needed to do a little light re-factoring to support the
half-precision helpers.
Backports commit 5c36d89567cfd049a7c59ff219639f788225068f from qemu
Neither of these operations alter the floating point status registers
so we can do a pure bitwise operation, either squashing any sign
bit (ABS) or inverting it (NEG).
Backports commit 15f8a233c8c023dbc77b6fe6cd7c79eac9bee263 from qemu
I re-use the existing handle_2misc_fcmp_zero handler and tweak it
slightly to deal with the half-precision case.
Backports commit 7d4dd1a73a023f75c893623710e43743501b318e from qemu
This adds the full range of half-precision floating point to integral
instructions.
Backports commit 6109aea2d954891027acba64a13f1f1c7463cfac from qemu
This actually covers two different sections of the encoding table:
Advanced SIMD scalar two-register miscellaneous FP16
Advanced SIMD two-register miscellaneous (FP16)
The difference between the two is covered by a combination of Q (bit
30) and S (bit 28). Notably the FRINTx instructions are only
available in the vector form.
This is just the decode skeleton which will be filled out by later
patches.
Backports commit 5d432be6fd6efe37833ac82623c3abd35117b421 from qemu
A bunch of the vectorised bitwise operations just operate on larger
chunks at a time. We can do the same for the new half-precision
operations by introducing some TWOHALFOP helpers which work on each
half of a pair of half-precision operations at once.
Hopefully all this hoop jumping will get simpler once we have
generically vectorised helpers here.
Backports commit 6089030c7322d8f96b54fb9904e53b0f464bb8fe from qemu
The helpers use the new re-factored muladd support in SoftFloat for
the float16 work.
Backports commit 5d265064cf30daaacce5a4ce9945fc573015fb5f from qemu
As some of the constants here will also be needed
elsewhere (specifically for the upcoming SVE support) we move them out
to softfloat.h.
Backports commit 026e2d6ef74000afb9049f46add4b94f594c8fb3 from qemu
Backports commit 2deb992b767d28035fac3b374c7730494ff0b43d from qemu
Also backports the fp16 changes introduced in commit f566c0474a9b9bbd9ed248607e4007e24d3358c0
These use the generic float16_compare functionality which in turn uses
the common float_compare code from the softfloat re-factor.
Backports commit d32adeae1a71a8e71374fa48d3d6ab0ad4c23e94 from qemu
The fprintf is only there for debugging as the skeleton is added to,
it will be removed once the skeleton is complete.
Backports commit 372087348d561e7f4051d7b32609bda417092ddf from qemu
This is the initial decode skeleton for the Advanced SIMD three same
instruction group.
The fprintf is purely to aid debugging as the additional instructions
are added. It will be removed once the group is complete.
Backports commit 376e8d6cda985df31c8561db4b7ea365b6fe6f87 from qemu
This implements the half-precision variants of the across vector
reduction operations. This involves a re-factor of the reduction code
which more closely matches the ARM ARM order (and handles 8 element
reductions).
Backports commit 807cdd504283c11addcd7ea95ba594bbddc86fe4 from qemu
As the rounding mode is now split between FP16 and the rest of
floating point we need to be explicit when tweaking it. Instead of
passing the CPU env we now pass the appropriate fpst pointer directly.
Backports commit 9b04991686785e18b18a36d193b68f08f7c91648 from qemu
Half-precision flush to zero behaviour is controlled by a separate
FZ16 bit in the FPCR. To handle this we pass a pointer to
fp_status_fp16 when working on half-precision operations. The value of
the presented FPCR is calculated from an amalgam of the two when read.
Backports commit d81ce0ef2c4f1052fcdef891a12499eca3084db7 from qemu
When storing to an AdvSIMD FP register, all of the high
bits of the SVE register are zeroed. Therefore, call it
more often with is_q as a parameter.
Backports commit 4ff55bcb0ee6452b768835f86d94bd727185f812 from qemu
Change vfp.regs as a uint64_t to vfp.zregs as an ARMVectorReg.
The previous patches have made the change in representation
relatively painless.
Backports commit c39c2b9043ec59516c80f2c6f3e8193e99d04d4b from qemu
This implements emulation of the new SM4 instructions that have
been added as an optional extension to the ARMv8 Crypto Extensions
in ARM v8.2.
Backports commit b6577bcd251ca0d57ae1de149e3c706b38f21587 from qemu
