This can reduce the number of opcodes required for certain
complex forms of load-multiple (e.g. ld4.16b).
Backports commit a7d8143aed2268f147cc1abfebc848ed6282a313 from qemu
For traps of FP/SIMD instructions to AArch32 Hyp mode, the syndrome
provided in HSR has more information than is reported to AArch64.
Specifically, there are extra fields TA and coproc which indicate
whether the trapped instruction was FP or SIMD. Add this extra
information to the syndromes we construct, and mask it out when
taking the exception to AArch64.
Backports commit 4be42f4013fa1a9df47b48aae5148767bed8e80c from qemu
For the v7 version of the Arm architecture, the IL bit in
syndrome register values where the field is not valid was
defined to be UNK/SBZP. In v8 this is RES1, which is what
QEMU currently implements. Handle the desired v7 behaviour
by squashing the IL bit for the affected cases:
* EC == EC_UNCATEGORIZED
* prefetch aborts
* data aborts where ISV is 0
(The fourth case listed in the v8 Arm ARM DDI 0487C.a in
section G7.2.70, "illegal state exception", can't happen
on a v7 CPU.)
This deals with a corner case noted in a comment.
Backports commit 2ed08180db096ea5e44573529b85e09b1ed10b08 from qemu
Create and use a utility function to extract the EC field
from a syndrome, rather than open-coding the shift.
Backports commit 64b91e3f890a8c221b65c6820a5ee39107ee40f5 from qemu
If the HCR_EL2 PTW virtualizaiton configuration register bit
is set, then this means that a stage 2 Permission fault must
be generated if a stage 1 translation table access is made
to an address that is mapped as Device memory in stage 2.
Implement this.
Backports commit eadb2febf05452bd8062c4c7823d7d789142500c from qemu
The HCR_EL2 VI and VF bits are supposed to track whether there is
a pending virtual IRQ or virtual FIQ. For QEMU we store the
pending VIRQ/VFIQ status in cs->interrupt_request, so this means:
* if the register is read we must get these bit values from
cs->interrupt_request
* if the register is written then we must write the bit
values back into cs->interrupt_request
Backports commit 8a0fc3a29fc2315325400c738f807d0d4ae0ab7f from qemu
The A/I/F bits in ISR_EL1 should track the virtual interrupt
status, not the physical interrupt status, if the associated
HCR_EL2.AMO/IMO/FMO bit is set. Implement this, rather than
always showing the physical interrupt status.
We don't currently implement anything to do with external
aborts, so this applies only to the I and F bits (though it
ought to be possible for the outer guest to present a virtual
external abort to the inner guest, even if QEMU doesn't
emulate physical external aborts, so there is missing
functionality in this area).
Backports commit 636540e9c40bd0931ef3022cb953bb7dbecd74ed from qemu
The HCR.DC virtualization configuration register bit has the
following effects:
* SCTLR.M behaves as if it is 0 for all purposes except
direct reads of the bit
* HCR.VM behaves as if it is 1 for all purposes except
direct reads of the bit
* the memory type produced by the first stage of the EL1&EL0
translation regime is Normal Non-Shareable,
Inner Write-Back Read-Allocate Write-Allocate,
Outer Write-Back Read-Allocate Write-Allocate.
Implement this behaviour.
Backports commit 9d1bab337caf2324a233e5937f415fad4ce1641b from qemu
The HCR.FB virtualization configuration register bit requests that
TLB maintenance, branch predictor invalidate-all and icache
invalidate-all operations performed in NS EL1 should be upgraded
from "local CPU only to "broadcast within Inner Shareable domain".
For QEMU we NOP the branch predictor and icache operations, so
we only need to upgrade the TLB invalidates:
AArch32 TLBIALL, TLBIMVA, TLBIASID, DTLBIALL, DTLBIMVA, DTLBIASID,
ITLBIALL, ITLBIMVA, ITLBIASID, TLBIMVAA, TLBIMVAL, TLBIMVAAL
AArch64 TLBI VMALLE1, TLBI VAE1, TLBI ASIDE1, TLBI VAAE1,
TLBI VALE1, TLBI VAALE1
Backports commit b4ab8ce98b8c482c8986785800f238d32a1578a9 from qemu
For AArch32, exception return happens through certain kinds
of CPSR write. We don't currently have any CPU_LOG_INT logging
of these events (unlike AArch64, where we log in the ERET
instruction). Add some suitable logging.
This will log exception returns like this:
Exception return from AArch32 hyp to usr PC 0x80100374
paralleling the existing logging in the exception_return
helper for AArch64 exception returns:
Exception return from AArch64 EL2 to AArch64 EL0 PC 0x8003045c
Exception return from AArch64 EL2 to AArch32 EL0 PC 0x8003045c
(Note that an AArch32 exception return can only be
AArch32->AArch32, never to AArch64.)
Backports commit 81e3728407bf4a12f83e14fd410d5f0a7d29b5b4 from qemu
Having V6 alone imply jazelle was wrong for cortex-m0.
Change to an assertion for V6 & !M.
This was harmless, because the only place we tested ARM_FEATURE_JAZELLE
was for 'bxj' in disas_arm(), which is unreachable for M-profile cores.
Backports commit 09cbd50198d5dcac8bea2e47fa5dd641ec505fae from qemu
Both arm and thumb2 division are controlled by the same ISAR field,
which takes care of the arm implies thumb case. Having M imply
thumb2 division was wrong for cortex-m0, which is v6m and does not
have thumb2 at all, much less thumb2 division.
Backports commit 7e0cf8b47f0e67cebbc3dfa73f304e56ad1a090f from qemu
Most of the v8 extensions are self-contained within the ISAR
registers and are not implied by other feature bits, which
makes them the easiest to convert.
Backports commit 962fcbf2efe57231a9f5df0ae0f40c05e35628ba from qemu
Instantiating mps2-an505 (cortex-m33) will fail make check when
V7VE asserts that ID_ISAR0.Divide includes ARM division. It is
also wrong to include ARM_FEATURE_LPAE.
Backports commit 5256df880d1312a58472af3fb0a3c51e708f2161 from qemu
This patch extends the qemu-kvm state sync logic with support for
KVM_GET/SET_VCPU_EVENTS, giving access to yet missing SError exception.
And also it can support the exception state migration.
The SError exception states include SError pending state and ESR value,
the kvm_put/get_vcpu_events() will be called when set or get system
registers. When do migration, if source machine has SError pending,
QEMU will do this migration regardless whether the target machine supports
to specify guest ESR value, because if target machine does not support that,
it can also inject the SError with zero ESR value.
Backports the relevant parts of commit
202ccb6bab5fe26bca2c82bff23302f7acfd1940 from qemu
GCC7+ will no longer advertise support for 16-byte __atomic operations
if only cmpxchg is supported, as for x86_64. Fortunately, x86_64 still
has support for __sync_compare_and_swap_16 and we can make use of that.
AArch64 does not have, nor ever has had such support, so open-code it.
Backports commit e6cd4bb59b8154fa00da611200beef7eb4e8ec56 from qemu
Isolate the computation of an index from an address into a
helper before we change that function.
Backports commit 383beda9cf32f795616c3b93f7d6154d70372d4b from qemu
We forgot to initialize n in commit 15fa08f845 ("tcg: Dynamically
allocate TCGOps", 2017-12-29).
Backports commit c1f543b739086733024e31d74a52d9e41553f316 from qemu
Consistently access u16.high with atomics to avoid
undefined behaviour in MTTCG.
Note that icount_decr.u16.low is only used in icount mode,
so regular accesses to it are OK.
Backports part of commit fff42f183ea4c3967405d4c1dce6d97dae4d64c8 from
qemu
Rather than test NOCHAIN before linking, do not emit the
goto_tb opcode at all. We already do this for goto_ptr.
Backports commit d7f425fdea991f052241c6479acd9feae834063b from qemu
Fix misplaced 'break' in handling of NM_SHRA_R_PH. Found by
Coverity (CID 1395627).
Backports commit d5ebcbaf09e8c14e62b2966446195be5eeabcbab from qemu
Fix emulation of microMIPS R6 <SELEQZ|SELNEZ>.<D|S> instructions.
Their handling was permuted.
Backports commit fdac60cd0458f34b2e79d74a55bec10836e26471 from qemu
Implement hardware page table walker. This implementation is
limiter only to MIPS32.
Backports commit 074cfcb4daedf59ccbbbc83c24eee80e0e8f4c71 from qemu
Add reset state for PWSize and PWField registers. The reset state
is different for pre-R6 and R6 (and post-R6) ISAa
Backports commit 630107955757b9dfc5c09f105caa267eded2e3b1 from qemu
Add PWCtl register (CP0 Register 5, Select 6).
The PWCtl register configures hardware page table walking for TLB
refills.
This register is required for the hardware page walker feature. It
exists only if Config3 PW bit is set to 1. It contains following
fields:
PWEn (31) - Hardware Page Table walker enable
PWDirExt (30) - If 1, 4-th level implemented (MIPS64 only)
XK (28) - If 1, walker handles xkseg (MIPS64 only)
XS (27) - If 1, walker handles xsseg (MIPS64 only)
XU (26) - If 1, walker handles xuseg (MIPS64 only)
DPH (7) - Dual Page format of Huge Page support
HugePg (6) - Huge Page PTE supported in Directory levels
PSn (5..0) - Bit position of PTEvld in Huge Page PTE
Backports commit 103be64c26c166f12b3e1308edadef3443723ff1 from qemu
Add PWSize register (CP0 Register 5, Select 7).
The PWSize register configures hardware page table walking for TLB
refills.
This register is required for the hardware page walker feature. It
exists only if Config3 PW bit is set to 1. It contains following
fields:
BDW (37..32) Base Directory index width (MIPS64 only)
GDW (29..24) Global Directory index width
UDW (23..18) Upper Directory index width
MDW (17..12) Middle Directory index width
PTW (11..6 ) Page Table index width
PTEW ( 5..0 ) Left shift applied to the Page Table index
Backports commit 20b28ebc49945583d7191b57755cfd92433de9ff from qemu
Add PWField register (CP0 Register 5, Select 6).
The PWField register configures hardware page table walking for TLB
refills.
This register is required for the hardware page walker feature. It
exists only if Config3 PW bit is set to 1. It contains following
fields:
MIPS64:
BDI (37..32) - Base Directory index
GDI (29..24) - Global Directory index
UDI (23..18) - Upper Directory index
MDI (17..12) - Middle Directory index
PTI (11..6 ) - Page Table index
PTEI ( 5..0 ) - Page Table Entry shift
MIPS32:
GDW (29..24) - Global Directory index
UDW (23..18) - Upper Directory index
MDW (17..12) - Middle Directory index
PTW (11..6 ) - Page Table index
PTEW ( 5..0 ) - Page Table Entry shift
Backports commit fa75ad1459f4f6abbeb6d375a812dfad61320f58 from qemu
Add PWBase register (CP0 Register 5, Select 5).
The PWBase register contains the Page Table Base virtual address.
This register is required for the hardware page walker feature. It
exists only if Config3 PW bit is set to 1.
Backports commit 5e31fdd59fda5c4ba9eb0daadc2a26273a29a0b6 from qemu
Add field corresponding to CP0 Config2 to DisasContext. This is
needed for availability control via Config2 bits.
Backports commit 49735f76db25bf10f57973d5249f17151b801760 from qemu
Do following replacements:
ASE_DSPR2 -> ASE_DSP_R2
ASE_DSPR3 -> ASE_DSP_R3
MIPS_HFLAG_DSPR2 -> MIPS_HFLAG_DSP_R2
MIPS_HFLAG_DSPR3 -> MIPS_HFLAG_DSP_R3
check_dspr2() -> check_dsp_r2()
check_dspr3() -> check_dsp_r3()
and several other similar minor replacements.
Backports commit 908f6be1b9cbc270470230f805d6f7474ab3178d from qemu
Add infrastructure for availability control for DSP R3 ASE MIPS
instructions. Only BPOSGE32C currently belongs to DSP R3 ASE, but
this is likely to be changed in near future.
Backports commit 59e781fbf13a2dede15437d055b09d7ea120dcac from qemu
Increase the size of insn_flags holder size to 64 bits. This is
needed for future extensions since existing bits are almost all used.
Backports commit f9c9cd63e3dd84c5f052deec880ec92046bbe305 from qemu
Add a comment that contains a list all MXU instructions,
expressed in assembler mnemonics.
Backports commit 1d0e663c5f25345a6702d8a83c051b83f3462299 from qemu
