The target-dependant type TCGv must be defined in "tcg/tcg.h" before
including the tracing helper wrappers in "tcg/tcg-op.h".
It also makes more sense to define it here, where other TCG types are
defined too.
Backports commit 5d4e1a1081d3f1ec2908ff0eaebe312389971ab4 from qemu
Adds the 'TCGv_env' type for pointers to 'CPUArchState' objects. The
tracing infrastructure later needs to differentiate between regular
pointers and pointers to vCPUs.
Also changes all targets to use the new 'TCGv_env' type instead of the
generic 'TCGv_ptr'. As of now, the change is merely cosmetic ('TCGv_env'
translates into 'TCGv_ptr'), but that could change in the future to
enforce the difference.
Note that a 'TCGv_env' type (for 'CPUState') is not added, since all
helpers currently receive the architecture-specific
pointer ('CPUArchState').
Backports commit 1bcea73e13b2b059d0cb3301aeaca43e5656ef57 from qemu
The v8 ARM ARM defines that unused spaces in the ID_AA64* system
register ranges are Reserved and must RAZ, rather than being UNDEF.
Implement this.
In particular, ARM v8.2 adds a new feature register ID_AA64MMFR2,
and newer versions of the Linux kernel will attempt to read this,
which causes them not to boot up on versions of QEMU missing this fix.
Since the encoding .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 6
is actually defined in ARMv8 (as ID_MMFR4), we give it an entry in
the ARMCPU struct so CPUs can override it, though since none do
this too will just RAZ.
Backports commit e20d84c1407d43d5a2e2ac95dbb46db3b0af8f9f from qemu
Mark CNTHP_TVAL_EL2 as ARM_CP_NO_RAW due to the register not
having any underlying state. This fixes an issue with booting
KVM enabled kernels when EL2 is on.
Backports commit d44ec156300a149b386a14d3ab349d3b83b66b8c from qemu
Implement the performance monitor register traps controlled
by MDCR_EL3.TPM and MDCR_EL2.TPM. Most of the performance
registers already have an access function to deal with the
user-enable bit, and the TPM checks can be added there. We
also need a new access function which only implements the
TPM checks for use by the few not-EL0-accessible registers
and by PMUSERENR_EL0 (which is always EL0-readable).
Backports commit 1fce1ba985d9c5c96e5b9709e1356d1814b8fa9e from qemu
Fix two issues with our implementation of the SDCR:
* it is only present from ARMv8 onwards
* it does not contain several of the trap bits present in its 64-bit
counterpart the MDCR_EL3
Put the register description in the right place so that it does not
get enabled for ARMv7 and earlier, and give it a write function so that
we can mask out the bits which should not be allowed to have an effect
if EL3 is 32-bit.
Backports commit a8d64e735182cbbb5dcc98f41656b118c45e57cc from qemu
If HCR.TGE is 1 then mode changes via CPS and MSR from Monitor to
NonSecure PL1 modes are illegal mode changes. Implement this check
in bad_mode_switch().
(We don't currently implement HCR.TGE, but this is the only missing
check from the v8 ARM ARM G1.9.3 and so it's worth adding now; the
rest of the HCR.TGE checks can be added later as necessary.)
Backports commit 10eacda787ac9990dc22d4437b289200c819712c from qemu
Mode switches from Hyp to any other mode via the CPS and MRS
instructions are illegal mode switches (though obviously switching
via exception return is valid). Add this check to bad_mode_switch().
Backports commit af393ffc6da116b9dd4c70901bad1f4cafb1773d from qemu
In v8, the illegal mode changes which are UNPREDICTABLE in v7 are
given architected behaviour:
* the mode field is unchanged
* PSTATE.IL is set (so any subsequent instructions will UNDEF)
* any other CPSR fields are written to as normal
This is pretty much the same behaviour we picked for our
UNPREDICTABLE handling, with the exception that for v8 we
need to set the IL bit.
Backports commit 81907a582901671c15be36a63b5063f88f3487e2 from qemu
In v8 trying to switch mode to Mon from Secure EL1 is an
illegal mode switch. (In v7 this is impossible as all secure
modes except User are at EL3.) We can handle this case by
making a switch to Mon valid only if the current EL is 3,
which then gives the correct answer whether EL3 is AArch32
or AArch64.
Backports commit 58ae2d1f037fae1d90eed4522053a85d79edfbec from qemu
We don't actually support Hyp mode yet, but add the correct
checks for it to the bad_mode_switch() function for completeness.
Backports commit e6c8fc07b4fce0729bb747770756835f4b0ca7f4 from qemu
QEMU doesn't implement the NSACR.RFR bit, which is a permitted
IMPDEF in choice in ARMv7 and the only permitted choice in ARMv8.
Add a comment to bad_mode_switch() to note that this is why
FIQ is always a valid mode regardless of the CPU's Secure state.
Backports commit 52ff951b4f63a29593650a15efdf82f63d6d962d from qemu
The only case where we can attempt a cpsr_write() mode switch from
User is from the gdbstub; all other cases are handled in the
calling code (notably translate.c). Architecturally attempts to
alter the mode bits from user mode are simply ignored (and not
treated as a bad mode switch, which in v8 sets CPSR.IL). Make
mode switches from User ignored in cpsr_write() as well, for
consistency.
Backports commit cb01d3912c8b000ed26d5fe95f6c194b3e3ba7a6 from qemu
Raw CPSR writes should skip the architectural checks for whether
we're allowed to set the A or F bits and should also not do
the switching of register banks if the mode changes. Handle
this inside cpsr_write(), which allows us to drop the "manually
set the mode bits to avoid the bank switch" code from all the
callsites which are using CPSRWriteRaw.
This fixes a bug in 32-bit KVM handling where we had forgotten
the "manually set the mode bits" part and could thus potentially
trash the register state if the mode from the last exit to userspace
differed from the mode on this exit.
Backports commit f8c88bbcda76d5674e4bb125471371b41d330df8 from qemu
Add an argument to cpsr_write() to indicate what kind of CPSR
write is being requested, since the exact behaviour should
differ for the different cases.
Backports commit 50866ba5a2cfe922aaf3edb79f6eac5b0653477a from qemu
The rules for setting the CPSR on a 32-bit exception return are
subtly different from those for setting the CPSR via an instruction
like MSR or CPS. (In particular, in Hyp mode changing the mode bits
is not valid via MSR or CPS.) Split the exception-return case into
its own helper for setting CPSR, so we can eventually handle them
differently in the helper function.
Backports commit 235ea1f5c89abf30e452539b973b0dbe43d3fe2b from qemu
MIPS Release 6 provides multi-threading features which replace
pre-R6 MT Module. CP0.Config3.MT is always 0 in R6, instead there is new
CP0.Config5.VP (Virtual Processor) bit which indicates presence of
multi-threading support which includes CP0.GlobalNumber register and
DVP/EVP instructions.
Backports commit 01bc435b44b8802cc4697faa07d908684afbce4e from qemu
The xsave and xrstor helpers are accessing the x86_ext_save_areas array
using a bit mask instead of a bit position. Provide two sets of XSTATE_*
definitions and use XSTATE_*_BIT when a bit position is requested.
Backports commit cfc3b074de4b4ccee2540edbf8cfdb026dc19943 from qemu
these two functions consume too much cpu overhead to
find the RAMBlock by ram address.
After this patch, we can pass the RAMBlock pointer
to them so that they don't need to find the RAMBlock
anymore most of the time. We can get better performance
in address translation processing.
Backports commit 3655cb9c7375a595a8051ec677c515b24d5c1fe6 from qemu
Each RAM memory region has a unique corresponding RAMBlock.
In the current realization, the memory region only stored
the ram_addr which means the offset of RAM address space,
We need to qurey the global ram.list to find the ram block
by ram_addr if we want to get the ram block, which is very
expensive.
Now, we store the RAMBlock pointer into memory region
structure. So, if we know the mr, we can easily get the
RAMBlock.
Backports commit 58eaa2174e99d9a05172d03fd2799ab8fd9e6f60 from qemu
Commit 757e725b58c57d added a number of #include "qemu/osdep.h"
files to the tcg-target.c files (as they were named at the time).
These are unnecessary because these files are not standalone C
files, and the tcg/tcg.c file which includes them will have
already included osdep.h on their behalf. Remove the unneeded
include directives.
Backports commit c3b7f66800fbf9f47fddbcf2e2cd30ea932e0aae from qemu
Rename the per-architecture tcg-target.c files to tcg-target.inc.c.
This makes it clearer that they are not intended to be standalone
C files, but are instead #included into another source file.
Backports commit ce151109813e2770fd3cee2f37bfa2cdd01a12b9 from qemu
Since we've not got liveness analysis for indirect bases,
placing them at the end of the call-saved registers makes
it more likely that it'll stay live.
Backports commit 91478cefaaf2fa678e56df8635b34957f4d5d565 from qemu
That is, global_mem registers whose base is another global_mem
register, rather than a fixed register.
Backports commit b3915dbbdcdb2e04753f3d34a1b0865eea005069 from qemu
A previous patch patch changed the type of REG from int
to enum TCGReg, which provokes the following bug in clang:
https://llvm.org/bugs/show_bug.cgi?id=16154
Backports commit 869938ae2a284fe730cb6f807ea0f9e324e0f87c from qemu
NEED_CPU_H is the define we use to distinguish per-target object
compilation from common object compilation. For the former, we must
also include config-target.h so that the .c files see the necessary
CONFIG_ constants.
Backports commit b1e34d1c3a9059e87719634bfc4db53174d63e14 from qemu
For C++ before C++11, <stdint.h> requires definition of the macros
__STDC_CONSTANT_MACROS, __STDC_LIMIT_MACROS and __STDC_FORMAT_MACROS
in order to enable definition of various macros by the header file.
Define these in osdep.h, so that we get the right header file
definitions whether osdep.h is being used by plain C, C++11 or
older C++.
In particular libvixl's header files depend on this and won't
compile if osdep.h is included before them otherwise.
Backports commit 79f56d82f805b170fa2be8c04b682117be56483f from qemu
We now do not use the int_fast*_t types anywhere in QEMU, so we can
remove the compatibility definitions we were providing for the
benefit of ancient Solaris versions.
Backports commit 50fe4df8ee6aba63ae51457bad40ba26e3c9746f from qemu
Use the plain 'int' type rather than 'int_fast16_t' for handling
exponents. Exponents don't need to be exactly 16 bits, so using int16_t
for them would confuse more than it clarified.
This should be a safe change because int_fast16_t semantics
permit use of 'int' (and on 32-bit glibc that is what you get).
Backports commit 0c48262d4772d40677364199372fb6ffcf487558 from qemu
Use the plain 'int' type rather than 'int_fast16_t' for shift counts
in the various shift related functions, since we don't actually care
about the size of the integer at all here, and using int16_t would
be confusing.
This should be a safe change because int_fast16_t semantics
permit use of 'int' (and on 32-bit glibc that is what you get).
Backports commit 07d792d2b08669bf6a97cbf590496078c4621068 from qemu
Make the functions which convert floating point to 16 bit integer
return int16_t rather than int_fast16_t, and correspondingly use
int_fast16_t in their internal implementations where appropriate.
(These functions are used only by the ARM target.)
Backports commit 0bb721d7217ed4a1abb44f521c5c7ec185062d58 from qemu
The r4k_tlb_t structure uses the uint_fast*_t types. Most of these
uses are in bitfields and are thus pointless, because the bitfield
itself specifies the width of the type; just use 'unsigned int'
instead. (On glibc uint_fast16_t is defined as either 32 or 64 bits,
so we know the code is not reliant on it being exactly 16 bits.)
There is also one use of uint_fast8_t, which we replace with uint8_t,
because both are exactly 8 bits on glibc and this is the only
place outside the softfloat code which uses an int_fast*_t type.
Backports commit d783f78933b212537ece77c7ec66866cc2bc0f4d from qemu
There's no reason to do two malloc's for a flat union; let's just
inline the branch struct directly into the C union branch of the
flat union.
Surprisingly, fewer clients were actually using explicit references
to the branch types in comparison to the number of flat unions
thus modified.
This lets us reduce the hack in qapi-types:gen_variants() added in
the previous patch; we no longer need to distinguish between
alternates and flat unions.
The change to unboxed structs means that u.data (added in commit
cee2dedb) is now coincident with random fields of each branch of
the flat union, whereas beforehand it was only coincident with
pointers (since all branches of a flat union have to be objects).
Note that this was already the case for simple unions - but there
we got lucky. Remember, visit_start_union() blindly returns true
for all visitors except for the dealloc visitor, where it returns
the value !!obj->u.data, and that this result then controls
whether to proceed with the visit to the variant. Pre-patch,
this meant that flat unions were testing whether the boxed pointer
was still NULL, and thereby skipping visit_end_implicit_struct()
and avoiding a NULL dereference if the pointer had not been
allocated. The same was true for simple unions where the current
branch had pointer type, except there we bypassed visit_type_FOO().
But for simple unions where the current branch had scalar type, the
contents of that scalar meant that the decision to call
visit_type_FOO() was data-dependent - the reason we got lucky there
is that visit_type_FOO() for all scalar types in the dealloc visitor
is a no-op (only the pointer variants had anything to free), so it
did not matter whether the dealloc visit was skipped. But with this
patch, we would risk leaking memory if we could skip a call to
visit_type_FOO_fields() based solely on a data-dependent decision.
But notice: in the dealloc visitor, visit_type_FOO() already handles
a NULL obj - it was only the visit_type_implicit_FOO() that was
failing to check for NULL. And now that we have refactored things to
have the branch be part of the parent struct, we no longer have a
separate pointer that can be NULL in the first place. So we can just
delete the call to visit_start_union() altogether, and blindly visit
the branch type; there is no change in behavior except to the dealloc
visitor, where we now unconditionally visit the branch, but where that
visit is now always safe (for a flat union, we can no longer
dereference NULL, and for a simple union, visit_type_FOO() was already
safely handling NULL on pointer types).
Unfortunately, simple unions are not as easy to switch to unboxed
layout; because we are special-casing the hidden implicit type with
a single 'data' member, we really DO need to keep calling another
layer of visit_start_struct(), with a second malloc; although there
are some cleanups planned for simple unions in later patches.
visit_start_union() and gen_visit_implicit_struct() are now unused.
Drop them.
Note that after this patch, the only remaining use of
visit_start_implicit_struct() is for alternate types; the next patch
will do further cleanup based on that fact.
Backports commit 544a3731591f5d53e15f22de00ce5ac758d490b3 from qemu
There's no reason to do two malloc's for an alternate type visiting
a QAPI struct; let's just inline the struct directly as the C union
branch of the struct.
Surprisingly, no clients were actually using the struct member prior
to this patch outside of the testsuite; an earlier patch in the series
added some testsuite coverage to make the effect of this patch more
obvious.
In qapi.py, c_type() gains a new is_unboxed flag to control when we
are emitting a C struct unboxed within the context of an outer
struct (different from our other two modes of usage with no flags
for normal local variable declarations, and with is_param for adding
'const' in a parameter list). I don't know if there is any more
pythonic way of collapsing the two flags into a single parameter,
as we never have a caller setting both flags at once.
Ultimately, we want to also unbox branches for QAPI unions, but as
that touches a lot more client code, it is better as separate
patches. But since unions and alternates share gen_variants(), I
had to hack in a way to test if we are visiting an alternate type
for setting the is_unboxed flag: look for a non-object branch.
This works because alternates have at least two branches, with at
most one object branch, while unions have only object branches.
The hack will go away in a later patch.
The generated code difference to qapi-types.h is relatively small:
| struct BlockdevRef {
| QType type;
| union { /* union tag is @type */
| void *data;
|- BlockdevOptions *definition;
|+ BlockdevOptions definition;
| char *reference;
| } u;
| };
The corresponding spot in qapi-visit.c calls visit_type_FOO(), which
first calls visit_start_struct() to allocate or deallocate the member
and handle a layer of {} from the JSON stream, then visits the
members. To peel off the indirection and the memory management that
comes with it, we inline this call, then suppress allocation /
deallocation by passing NULL to visit_start_struct(), and adjust the
member visit:
| switch ((*obj)->type) {
| case QTYPE_QDICT:
|- visit_type_BlockdevOptions(v, name, &(*obj)->u.definition, &err);
|+ visit_start_struct(v, name, NULL, 0, &err);
|+ if (err) {
|+ break;
|+ }
|+ visit_type_BlockdevOptions_fields(v, &(*obj)->u.definition, &err);
|+ error_propagate(errp, err);
|+ err = NULL;
|+ visit_end_struct(v, &err);
| break;
| case QTYPE_QSTRING:
| visit_type_str(v, name, &(*obj)->u.reference, &err);
The visit of non-object fields is unchanged.
Backports commit becceedc4d9bc1435099c90a0514945a89844d3a from qemu
We have several instances of methods that do an early exit if
output is not needed, then log that output is being generated,
and finally produce the output; see qapi-types.py:gen_object()
and qapi-visit.py:gen_visit_implicit_struct(). The odd man
out was gen_visit_fields_decl(); rearrange it to be more like
the others. No semantic change or difference to generated code.
Backports commit 2208d64998c5f867ccee7eeee298971685bf822d from qemu
Right now, we emit the branches of union types as a boxed pointer,
and it suffices to have a forward declaration of the type. However,
a future patch will swap things to directly use the branch type,
instead of hiding it behind a pointer. For this to work, the
compiler needs the full definition of the type, not just a forward
declaration, prior to the union that is including the branch type.
This patch just adds topological sorting to hoist all types
mentioned in a branch of a union to be fully declared before the
union itself. The sort is always possible, because we do not
allow circular union types that include themselves as a direct
branch (it is, however, still possible to include a branch type
that itself has a pointer to the union, for a type that can
indirectly recursively nest itself - that remains safe, because
that the member of the branch type will remain a pointer, and the
QMP representation of such a type adds another {} for each recurring
layer of the union type).
Backports commit 1de5d4ca0752138034305f3d4e8fe17ef6503569 from qemu
We were passing 'Foo **obj' to the internal helper function, but
all uses within the helper were via reads of '*obj'. Refactor
things to pass one less level of indirection, by having the
callers dereference before calling.
For an example of the generated code change:
|-static void visit_type_BalloonInfo_fields(Visitor *v, BalloonInfo **obj, Error **errp)
|+static void visit_type_BalloonInfo_fields(Visitor *v, BalloonInfo *obj, Error **errp)
| {
| Error *err = NULL;
|
|- visit_type_int(v, "actual", &(*obj)->actual, &err);
|+ visit_type_int(v, "actual", &obj->actual, &err);
| error_propagate(errp, err);
| }
|
|@@ -261,7 +261,7 @@ void visit_type_BalloonInfo(Visitor *v,
| if (!*obj) {
| goto out_obj;
| }
|- visit_type_BalloonInfo_fields(v, obj, &err);
|+ visit_type_BalloonInfo_fields(v, *obj, &err);
| out_obj:
The refactoring will also make it easier to reuse the helpers in
a future patch when implicit structs are stored directly in the
parent struct rather than boxed through a pointer.
Backports commit 655519030b5d20967ae3afa1fe91ef5ad4406065 from qemu
gen_visit_union() is now just like gen_visit_struct(). Rename
it to gen_visit_object(), use it for structs, and drop
gen_visit_struct(). Output is unchanged.
Backports commit 59d9e84cc94b8268f13ec184acfb997e8f352593 from qemu
We initially created the static visit_type_FOO_fields() helper
function for reuse of code - we have cases where the initial
setup for a visit has different allocation (depending on whether
the fields represent a stand-alone type or are embedded as part
of a larger type), but where the actual field visits are
identical once a pointer is available.
Up until the previous patch, visit_type_FOO_fields() was only
used for structs (no variants), so it was covering every field
for each type where it was emitted.
Meanwhile, the code for visiting unions looks like:
static visit_type_U_fields() {
visit base;
visit local_members;
}
visit_type_U() {
visit_start_struct();
visit_type_U_fields();
visit variants;
visit_end_struct();
}
which splits the fields of the union visit across two functions.
Move the code to visit variants to live inside visit_type_U_fields(),
while making it conditional on having variants so that all other
instances of the helper function remain unchanged. This is also
a step closer towards unifying struct and union visits, and towards
allowing one union type to be the branch of another flat union.
The resulting diff to the generated code is a bit hard to read,
but it can be verified that it touches only union types, and that
the end result is the following general structure:
static visit_type_U_fields() {
visit base;
visit local_members;
visit variants;
}
visit_type_U() {
visit_start_struct();
visit_type_U_fields();
visit_end_struct();
}
Backports commit 9a5cd424d5f06fb5293eb264456d89343c557558 from qemu
For a simple union SU, gen_visit_union() generates a visit of its
single tag member, like this:
visit_type_SUKind(v, "type", &(*obj)->type, &err);
For a flat union FU with base B, it generates a visit of its base
fields:
visit_type_B_fields(v, (B **)obj, &err);
Instead, we can simply visit the common members using the same fields
visit function we use for structs, generated with
gen_visit_struct_fields(). This function visits the base if any, then
the local members.
For a simple union SU, visit_type_SU_fields() contains exactly the old
tag member visit, because there is no base, and the tag member is the
only member. For instance, the code generated for qapi-schema.json's
KeyValue changes like this:
+static void visit_type_KeyValue_fields(Visitor *v, KeyValue **obj, Error **errp)
+{
+ Error *err = NULL;
+
+ visit_type_KeyValueKind(v, "type", &(*obj)->type, &err);
+ if (err) {
+ goto out;
+ }
+
+out:
+ error_propagate(errp, err);
+}
+
void visit_type_KeyValue(Visitor *v, const char *name, KeyValue **obj, Error **errp)
{
Error *err = NULL;
@@ -4863,7 +4911,7 @@ void visit_type_KeyValue(Visitor *v, con
if (!*obj) {
goto out_obj;
}
- visit_type_KeyValueKind(v, "type", &(*obj)->type, &err);
+ visit_type_KeyValue_fields(v, obj, &err);
if (err) {
goto out_obj;
}
For a flat union FU, visit_type_FU_fields() contains exactly the old
base fields visit, because there is a base, but no members. For
instance, the code generated for qapi-schema.json's CpuInfo changes
like this:
static void visit_type_CpuInfoBase_fields(Visitor *v, CpuInfoBase **obj, Error **errp);
+static void visit_type_CpuInfo_fields(Visitor *v, CpuInfo **obj, Error **errp)
+{
+ Error *err = NULL;
+
+ visit_type_CpuInfoBase_fields(v, (CpuInfoBase **)obj, &err);
+ if (err) {
+ goto out;
+ }
+
+out:
+ error_propagate(errp, err);
+}
+
static void visit_type_CpuInfoX86_fields(Visitor *v, CpuInfoX86 **obj, Error **errp)
...
@@ -3485,7 +3509,7 @@ void visit_type_CpuInfo(Visitor *v, cons
if (!*obj) {
goto out_obj;
}
- visit_type_CpuInfoBase_fields(v, (CpuInfoBase **)obj, &err);
+ visit_type_CpuInfo_fields(v, obj, &err);
if (err) {
goto out_obj;
}
As you see, the generated code grows a bit, but in practice, it's lost
in the noise: qapi-schema.json's qapi-visit.c gains roughly 1%.
This simplification became possible with commit 441cbac "qapi-visit:
Convert to QAPISchemaVisitor, fixing bugs". It's a step towards
unifying gen_struct() and gen_union().
Backports commit d7445b57f4342d50c25b5bc1746048fa3720511b from qemu
The whole point of an alternate is to allow some type-safety while
still accepting more than one JSON type. Meanwhile, the 'any'
type exists to bypass type-safety altogether. The two are
incompatible: you can't accept every type, and still tell which
branch of the alternate to use for the parse; fix this to give a
sane error instead of a Python stack trace.
Note that other types that can't be alternate members are caught
earlier, by check_type().
Backports commit 46534309e667fd860720f983c2c9aefe0354340d from qemu
Empty unions serve no purpose, and while we compile with gcc
which permits them, strict C99 forbids them. We happen to inject
a dummy 'void *data' member into the C unions that represent QAPI
unions and alternates, but we want to get rid of that member (it
pollutes the namespace for no good reason), which would leave us
with an empty union if the user didn't provide any branches. While
empty structs make sense in QAPI, empty unions don't add any
expressiveness to the QMP language. So prohibit them at parse
time. Update the documentation and testsuite to match.
Note that the documentation already mentioned that alternates
should have "two or more JSON data types"; so this also fixes
the code to enforce that. However, we have existing uses of a
union type with only one branch, so the 2-or-more strictness
is intentionally limited to alternates.
Backports commit 02a57ae32b08e8981b59979b80e682c9a153e94d from qemu
When we added support for a user-specified prefix for an enum
type (commit 351d36e), we forgot to teach the qapi-visit code
to honor that prefix in the case of using a prefixed enum as
the discriminator for a flat union. While there is still some
on-list debate on whether we want to keep prefixes, we should
at least make it work as long as it is still part of the code
base.
Backports commit 9d3524b39e1fe5f3bb7a990ad7841e469e954a3b from qemu
Make get_r13_banked() raise an exception at runtime for the
corner case of SRS from System mode, so that we can UNDEF it;
this brings us in to line with the ARM ARM's set of permitted
CONSTRAINED UNPREDICTABLE choices.
Backports commit f01377f591fe15c652f947646c4a69a7d4a71ad9 from qemu
The user-mode versions of get/set_r13_banked() exist just to assert
if they're ever called -- the translate time code should never
emit calls to them because SRS from user mode always UNDEF.
There's no code in the softmmu versions that can't compile in
CONFIG_USER_ONLY, and the assertion is not particularly useful,
so combine the two functions rather than having completely split
versions under ifdefs.
Backports commit d86d57d4fe683c99823f625f941eff26c07c72c3 from qemu
Move get/set_r13_banked() from helper.c to op_helper.c. This will
let us add exception-raising code to them, and also puts them
in the same file as get/set_user_reg(), which makes some conceptual
sense.
(The original reason for the helper.c/op_helper.c split was that
only op_helper.c had access to the CPU env pointer; this distinction
has not been true for a long time, though, and so the split is
now rather arbitrary.)
Backports commit 72309cee482868d6c4711931c3f7e02ab9dec229 from qemu
target-arm: Move bank_number() into internals.h
Move bank_number()'s implementation into internals.h, so
it's available in the user-mode-only compile as well.
Backports commit c766568d3604082c6fd45cbabe42c48e4861a13f from qemu
The SRS instruction is:
* UNDEFINED in Hyp mode
* UNPREDICTABLE in User or System mode
* UNPREDICTABLE if the specified mode isn't accessible
* trapped to EL3 if EL3 is AArch64 and we are at Secure EL1
Clean up the code to handle all these cases cleanly, including
picking UNDEF as our choice of UNPREDICTABLE behaviour rather
blindly trusting the mode field passed in the instruction.
As part of this, move the check for IS_USER into gen_srs()
itself rather than having it done by the caller.
The exception is that we don't UNDEF for calls from System
mode, which need a runtime check. This will be dealt with in
the following commits.
Backports commit cbc0326b6fb905f80b7cef85b24571f7ebb62077 from qemu
If access to FPEXC32_EL2 is trapped by CPTR_EL2.TFP or CPTR_EL3.TFP,
this should be reported with a syndrome register indicating an
FP access trap, not one indicating a system register access trap.
Backports commit f2cae6092767aaf418778eada15be444c23883be from qemu
Implement trapping of the "debug ROM" registers, which are controlled
by MDCR_EL2.TDRA for EL2 but by the more general MDCR_EL3.TDA for EL3.
Backports commit 91b0a23865558e2ce9c2e7042d404e8bf2e4b817 from qemu
Implement the traps to EL2 and EL3 controlled by the bits
MDCR_EL2.TDOSA MDCR_EL3.TDOSA. These can configurably trap
accesses to the "powerdown debug" registers.
Backports commit 187f678d5c28251dba2b44127e59966b14518ef7 from qemu
We weren't quite implementing the handling of SCR.SMD correctly.
The condition governing whether the SMD bit should apply only
for NS state is "is EL3 is AArch32", not "is the current EL AArch32".
Fix the condition, and clarify the comment both to reflect this and
to expand slightly on what's going on for the v7-no-Virtualization case.
Backports commit f096e92b6385fd87e8ea948ad3af70faf752c13a from qemu
Correct some corner cases we were getting wrong for
CNTFRQ access rights:
* should UNDEF from 32-bit Secure EL1
* only writable from the highest implemented exception level,
which might not be EL1 now
To clarify the code, provide a new utility function
arm_highest_el() which returns the highest implemented
exception level.
Backports commit 755026728abb19fba70e6b4396a27fa2e7550d74 from qemu
This is immediately usable by lea and multi-byte nop,
and will be required to implement parts of the mpx spec.
Backports commit a074ce42a3186bd9f96ef541bb2e01419181dae3 from qemu
This includes XSAVE, XRSTOR, XGETBV, XSETBV, which are all related,
as well as the associate cpuid bits.
Backports commit 19dc85dba23c0db1ca932c62e453c37e00761628 from qemu
Rather than nesting tests of OP, MOD, and RM, decode them all at once
with a switch. Also, add some missing #UD checks for e.g. incorrect
LOCK prefix.
Backports commit 121f3157887f92268a3d6169e2d4601f9292020b from qemu
Rather than nesting tests of OP, MOD, and RM, decode them
all at once with a switch. Fixes incorrect decoding of
AMD Pacifica extensions (aka vmrun et al) via op==2 path.
Backports commit 1906b2af7c2345037d9b2fdf484b457b5acd09d1 from qemu
The description of object_property_get_int() stated that on an error
it returns NULL. This is not the case and the function will return -1
if an error occurs. Update the commented documentation accordingly.
Backports commit b29b47e9b35017428904e0e934700877dfaabe73 from qemu
ARM stops before access to a location covered by watchpoint. Also, QEMU
watchpoint fire is not necessarily an architectural watchpoint match.
Unfortunately, that is hardly possible to ignore a fired watchpoint in
debug exception handler. So move watchpoint check from debug exception
handler to the dedicated watchpoint checking callback.
Backports commit 3826121d9298cde1d29ead05910e1f40125ee9b0 from qemu
When QEMU watchpoint matches, that is not definitely an architectural
watchpoint match yet. If it is a stop-before-access watchpoint then that
is hardly possible to ignore it after throwing a TCG exception.
A special callback is introduced to check for architectural watchpoint
match before raising a TCG exception.
Backports commit 568496c0c0f1863a4bc18539962cd8d81baa4e30 from qemu
All Thumb Neon and VFP instructions are 32 bits, so the IL
bit in the syndrome register should be set. Pass false to the
syn_* function's is_16bit argument rather than s->thumb
so we report the correct IL bit.
Backports commit 7d197d2db5e99e4c8b20f6771ddc7303acaa1c89 from qemu
All Thumb coprocessor instructions are 32 bits, so the IL
bit in the syndrome register should be set. Pass false to the
syn_* function's is_16bit argument rather than s->thumb
so we report the correct IL bit.
Backports commit 4df322593037d2700f72dfdfb967300b7ad2e696 from qemu
In syndrome register values, the IL bit indicates the instruction
length, and is 1 for 4-byte instructions and 0 for 2-byte
instructions. All A64 and A32 instructions are 4-byte, but
Thumb instructions may be either 2 or 4 bytes long. Unfortunately
we named the parameter to the syn_* functions for constructing
syndromes "is_thumb", which falsely implies that it should be
set for all Thumb instructions, rather than only the 16-bit ones.
Fix the functions to name the parameter 'is_16bit' instead.
Backports commit fc05f4a62c568b607ec3fe428a419bb38205b570 from qemu
Enable EL3 support for our Cortex-A53 and Cortex-A57 CPU models.
We have enough implemented now to be able to run real world code
at least to some extent (I can boot ARM Trusted Firmware to the
point where it pulls in OP-TEE and then falls over because it
doesn't have a UEFI image it can chain to).
Backports commit 3ad901bc2b98f5539af9a7d4aef140a6d8fa6442 from qemu
Implement some corner cases of the behaviour of the NSACR
register on ARMv8:
* if EL3 is AArch64 then accessing the NSACR from Secure EL1
with AArch32 should trap to EL3
* if EL3 is not present or is AArch64 then reads from NS EL1 and
NS EL2 return constant 0xc00
It would in theory be possible to implement all these with
a single reginfo definition, but for clarity we use three
separate definitions for the three cases and install the
right one based on the CPU feature flags.
Backports commit 2f027fc52d4b444a47cb05a9c96697372a6b57d2 from qemu
System registers might have access requirements which need to
be described via a CPAccessFn and which differ for reads and
writes. For this to be possible we need to pass the access
function a parameter to tell it whether the access being checked
is a read or a write.
Backports commit 3f208fd76bcc91a8506681bb8472f2398fe6f487 from qemu
The arm_generate_debug_exceptions() function as originally implemented
assumes no EL2 or EL3. Since we now have much more of an implementation
of those now, fix this assumption.
Backports commit 533e93f1cf12c570aab45f14663dab6fb8ea3ffc from qemu
The registers MVBAR and SCR should have the behaviour of trapping to
EL3 if accessed from Secure EL1, but we were incorrectly implementing
them to UNDEF (which would trap to EL1). Fix this by using the new
access_trap_aa32s_el1() access function.
Backports commit efe4a274083f61484a8f1478d93f229d43aa8095 from qemu
Implement the MDCR_EL3 register (which is SDCR for AArch32).
For the moment we implement it as reads-as-written.
Backports commit 5513c3abed8e5fabe116830c63f0d3fe1f94bd21 from qemu
(pde & 0x1fe000) is a 32-bit integer; when shifting it
into bits 39-32 the result is zero. Fix it by making the
mask (and thus the result of the AND) a 64-bit integer.
Reported by Coverity.
Backports commit 388ee48a88e684e719660a2cae9c21897b94fa37 from qemu
All references to cpu_T are done with a constant index. It aids
readability to decompose the array into two scalar variables.
Backports commit 1d1cc4d0f481b2939c7e9f6606e571b2fc81971a from qemu
Merge gen_op_addl_A0_im and gen_op_addq_A0_im into gen_add_A0_im
and clean up the ifdef.
Replace the one remaining user of gen_op_addl_A0_im with gen_add_A0_im.
Backports commit 4e85057b92d214decf10045d3d4faa2faf33d100 from qemu
Unify the code across stack pointer widths. Fix the note about
not updating ESP before the potential exception.
Backports commit 2045f04c3ae030bda650f84035f114bbd84909a9 from qemu
Use gen_lea_v_seg for centralized segment base knowledge. Unify
code across 32- and 64-bit. Fix note about "must save state"
before using the out-of-line helpers.
Backports commit 743e398e2fbf2f7183bf7a53c9d011fabcaa1770 from qemu
More centralization of handling of segment bases.
Also fixes the note about 16-bit wrap around not fully handled.
Backports commit d37ea0c04723f3e15fde55fe97cff6278159929b from qemu
Having segs[].base as a register significantly improves code
generation for real and protected modes, particularly for TBs
that have multiple memory references where the segment base
can be held in a hard register through the TB.
Backports commit 3558f8055f37a34762b7a2a0f02687e6eeab893d from qemu
I.e. gen_push_v, gen_pop_T0, gen_stack_A0.
More centralization of handling of segment bases.
Backports commit 77ebcad04f3659fa7eb799928fdd68280fac720d from qemu
Add forgotten zero-extension in the TARGET_X86_64, !CODE64, ss32 case;
use this new function to implement gen_string_movl_A0_EDI,
gen_string_movl_A0_ESI, gen_add_A0_ds_seg.
Backports commit ca2f29f555805d07fb0b9ebfbbfc4e3656530977 from qemu
This condition is true in the common case, so we can cut out the body of
the function. In addition, this makes it easier for the compiler to do
at least partial inlining, even if it decides that fully inlining the
function is unreasonable.
Backports commit 8bafcb21643a39a5b29109f8bd5ee5a6f0f6850b from qemu
Similar to error_abort, but doesn't report where the error was
created, and terminates the process with exit(1) rather than abort().
Backports commit a29a37b994ca3c5a1d39fa0e8934f7e0f2cf57ef from qemu
Don't claim error_report_err() always reports to stderr. It actually
reports to the current monitor when we have one.
Clarify intended use of error_abort and error_fatal.
Backports commit 10303f04b98efa76e638b9ae4632688f56f088fc from qemu
Commit 86f4b687 broke compilation on MIPS and SPARC, which have a
preprocessor pollution of '#define mips 1' and '#define sparc 1',
respectively. Treat it the same way as we do for the pollution with
'unix', so that QMP remains backwards compatible and only the C code
needs to use the alternative 'q_mips', 'q_sparc' spelling.
Backports commit 86ae191163d48ff4ff9d9996868e6cfe92a82449 from qemu
The previous commit documented an inconsistency in how we are
using the stack of qmp-output-visitor. Normally, pushing a
single top-level object puts the object on the stack twice:
once as the root, and once as the current container being
appended to; but popping that struct only pops once. However,
qmp_ouput_add() was trying to either set up the added object
as the new root (works if you parse two top-level scalars in a
row: the second replaces the first as the root) or as a member
of the current container (works as long as you have an open
container on the stack; but if you have popped the first
top-level container, it then resolves to the root and still
tries to add into that existing container).
Fix the stupidity by not tracking two separate things in the
stack. Drop the now-useless qmp_output_first() and
qmp_output_last() while at it.
Saved for a later patch: we still are rather sloppy in that
qmp_output_get_object() can be called in the middle of a parse,
rather than requiring that a visit is complete.
Backports commit 455ba08afde784466420449d01c6458f88349d55 from qemu
Commit 6c2f9a15 ensured that we would not return NULL when the
caller used an output visitor but had nothing to visit. But
in doing so, it added a FIXME about a reference count leak
that could abort qemu in the (unlikely) case of SIZE_MAX such
visits (more plausible on 32-bit). (Although that commit
suggested we might fix it in time for 2.5, we ran out of time;
fortunately, it is unlikely enough to bite that it was not
worth worrying about during the 2.5 release.)
This fixes things by documenting the internal contracts, and
explaining why the internal function can return NULL and only
the public facing interface needs to worry about qnull(),
thus avoiding over-referencing the qnull_ global object.
It does not, however, fix the stupidity of the stack mixing
up two separate pieces of information; add a FIXME to explain
that issue, which will be fixed shortly in a future patch.
Backports commit a86156401559cb4401cf9ecc704faeab6fc8bb19 from qemu
The only way that qmp_input_pop() will set errp is if a dictionary
was the most recent thing pushed. Since we don't have any
push(struct)/pop(list) or push(list)/pop(struct) mismatches (such
a mismatch is a programming bug), we therefore cannot set errp
inside qmp_input_end_list(). Make this obvious by
using &error_abort. A later patch will then remove the errp
parameter of qmp_input_pop(), but that will first require the
larger task of splitting visit_end_struct().
Backports commit bdd8e6b5d8a9def83d491a3f41c10424fc366258 from qemu
visit_start_struct() and visit_type_enum() had a 'kind' argument
that was usually set to either the stringized version of the
corresponding qapi type name, or to NULL (although some clients
didn't even get that right). But nothing ever used the argument.
It's even hard to argue that it would be useful in a debugger,
as a stack backtrace also tells which type is being visited.
Therefore, drop the 'kind' argument as dead.
Backports commit 337283dffbb5ad5860ed00408a5fd0665c21be07 from qemu
As explained in the previous patches, matching argument order of
'name, &value' to JSON's "name":value makes sense. However,
while the last two patches were easy with Coccinelle, I ended up
doing this one all by hand. Now all the visitor callbacks match
the main interface.
The compiler is able to enforce that all clients match the changed
interface in visitor-impl.h, even where two pointers are being
swapped, because only one of the two pointers is const (if that
were not the case, then C's looseness on treating 'char *' like
'void *' would have made review a bit harder).
Backports commit 0b2a0d6bb2446060944061e53e87d0c7addede79 from qemu
Commit 4e27e819 introduced optional visitor callbacks for all
sorts of int types, but no visitor has supplied any of the
callbacks for sizes less than 64 bits. In other words, the
generic implementation based on using type_[u]int64() followed
by bounds-checking works just fine. In the interest of
simplicity, it's easier to make the visitor callback interface
not have to worry about the other sizes.
Adding some helper functions minimizes the boilerplate required
to correct FIXMEs added earlier with regards to questionable
reuse of errp, particularly now that we can guarantee from a
single file audit that value is unchanged if an error is set.
Backports commit 04e070d217b4414f1f91aa8ad25fc0ae7ca0be93 from qemu
Similar to the previous patch, it's nice to have all functions
in the tree that involve a visitor and a name for conversion to
or from QAPI to consistently stick the 'name' parameter next
to the Visitor parameter.
Done by manually changing include/qom/object.h and qom/object.c,
then running this Coccinelle script and touching up the fallout
(Coccinelle insisted on adding some trailing whitespace).
@ rule1 @
identifier fn;
typedef Object, Visitor, Error;
identifier obj, v, opaque, name, errp;
@@
void fn
- (Object *obj, Visitor *v, void *opaque, const char *name,
+ (Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp) { ... }
@@
identifier rule1.fn;
expression obj, v, opaque, name, errp;
@@
fn(obj, v,
- opaque, name,
+ name, opaque,
errp)
Backports commit d7bce9999df85c56c8cb1fcffd944d51bff8ff48 from qemu
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp). This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order. It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.
Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.
Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.
Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
$ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings'). The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.
// Part 1: Swap declaration order
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_start_struct
-(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type bool, TV, T1;
identifier ARG1;
@@
bool visit_optional
-(TV v, T1 ARG1, const char *name)
+(TV v, const char *name, T1 ARG1)
{ ... }
@@
type TV, TErr, TObj, T1;
identifier OBJ, ARG1;
@@
void visit_get_next_type
-(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
{ ... }
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_type_enum
-(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type TV, TErr, TObj;
identifier OBJ;
identifier VISIT_TYPE =~ "^visit_type_";
@@
void VISIT_TYPE
-(TV v, TObj OBJ, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, TErr errp)
{ ... }
// Part 2: swap caller order
@@
expression V, NAME, OBJ, ARG1, ARG2, ERR;
identifier VISIT_TYPE =~ "^visit_type_";
@@
(
-visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
+visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-visit_optional(V, ARG1, NAME)
+visit_optional(V, NAME, ARG1)
|
-visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
+visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
|
-visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
+visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-VISIT_TYPE(V, OBJ, NAME, ERR)
+VISIT_TYPE(V, NAME, OBJ, ERR)
)
Backports commit 51e72bc1dd6ace6e91d675f41a1f09bd00ab8043 from qemu
No need to repeat 'struct Visitor' when we already have it in
typedefs.h. Omitting the redundant 'struct' also makes a later
patch easier to search for all object property callbacks that
are associated with a Visitor.
Backports commit 4fa45492c3387c0fa51e8e81160ac9a7814f44a2 from qemu
C compilers are allowed to represent enums as a smaller type
than int, if all enum values fit in the smaller type. There
are even compiler flags that force the use of this smaller
representation, although using them changes the ABI of a
binary. Therefore, our generated code for visit_type_ENUM()
(for all qapi enums) was wrong for casting Enum* to int* when
calling visit_type_enum().
It appears that no one has been using compiler ABI switches
for qemu, because if they had, we are potentially dereferencing
beyond bounds or even risking a SIGBUS on platforms where
unaligned pointer dereferencing is fatal. But it is still
better to avoid the practice entirely, and just use the correct
types.
This matches the fix for alternate qapi types, done earlier in
commit 0426d53 "qapi: Simplify visiting of alternate types",
with generated code changing as:
| void visit_type_QType(Visitor *v, QType *obj, const char *name, Error **errp)
| {
|- visit_type_enum(v, (int *)obj, QType_lookup, "QType", name, errp);
|+ int value = *obj;
|+ visit_type_enum(v, &value, QType_lookup, "QType", name, errp);
|+ *obj = value;
| }
Backports commit 395a233f7c089f23e3c0d43ce34c709dc5acd7de from qemu
The generated code can call visit_end_union() without having called
visit_start_union(). Example:
if (!*obj) {
goto out_obj;
}
visit_type_CpuInfoBase_fields(v, (CpuInfoBase **)obj, &err);
if (err) {
goto out_obj; // if we go from here...
}
if (!visit_start_union(v, !!(*obj)->u.data, &err) || err) {
goto out_obj;
}
switch ((*obj)->arch) {
[...]
}
out_obj:
// ... then *obj is true, and ...
error_propagate(errp, err);
err = NULL;
if (*obj) {
// we end up here
visit_end_union(v, !!(*obj)->u.data, &err);
}
error_propagate(errp, err);
Harmless only because no visitor implements end_union(). Clean it up
anyway, by deleting the function as useless.
Messed up since we have visit_end_union (commit cee2ded).
Backports commit 7c91aabd8964cfdf637f302c579c95401f21ce92 from qemu
Inside the generated code between visit_start_struct() and
visit_end_struct(), we were blindly setting the error into
the caller's errp parameter. But a future patch to split
visit_end_struct() will require that we take action based
on whether an error has occurred, which requires us to track
all actions through a local err. Rewrite the visits to be
more in line with the other generated calls.
Generated code changes look like:
| visit_start_struct(v, (void **)obj, "Abort", name, sizeof(Abort), &err);
|- if (!err) {
|- if (*obj) {
|- visit_type_Abort_fields(v, obj, errp);
|- }
|- visit_end_struct(v, &err);
|+ if (err) {
|+ goto out;
| }
|+ if (!*obj) {
|+ goto out_obj;
|+ }
|+ visit_type_Abort_fields(v, obj, &err);
|+ error_propagate(errp, err);
|+ err = NULL;
|+out_obj:
|+ visit_end_struct(v, &err);
|+out:
| error_propagate(errp, err);
| }
Backports commit 92b09babc11b60458c28cfe37eaa314de50e6241 from qemu
All other successful clients of visit_start_struct() were paired
with an unconditional visit_end_struct(); but the generated
code for events was relying on qmp_output_visitor_cleanup() to
work on an incomplete visit. Alter the code to guarantee that
the struct is completed, which will make a future patch to
split visit_end_struct() easier to reason about. While at it,
drop some assertions and comments that are not present in other
uses of the qmp output visitor, and pass NULL rather than "" as
the 'kind' parameter (matching most other uses where obj is NULL).
The changes to the generated code look like:
| qmp = qmp_event_build_dict("DEVICE_TRAY_MOVED");
|
| qov = qmp_output_visitor_new();
|- g_assert(qov);
|-
| v = qmp_output_get_visitor(qov);
|- g_assert(v);
|
|- /* Fake visit, as if all members are under a structure */
|- visit_start_struct(v, NULL, "", "DEVICE_TRAY_MOVED", 0, &err);
|+ visit_start_struct(v, NULL, NULL, "DEVICE_TRAY_MOVED", 0, &err);
| if (err) {
| goto out;
| }
| visit_type_str(v, (char **)&device, "device", &err);
| if (err) {
|- goto out;
|+ goto out_obj;
| }
| visit_type_bool(v, &tray_open, "tray-open", &err);
| if (err) {
|- goto out;
|+ goto out_obj;
| }
|- visit_end_struct(v, &err);
|+out_obj:
|+ visit_end_struct(v, err ? NULL : &err);
| if (err) {
| goto out;
| }
|
| obj = qmp_output_get_qobject(qov);
|- g_assert(obj != NULL);
|+ g_assert(obj);
|
| qdict_put_obj(qmp, "data", obj);
| emit(QAPI_EVENT_DEVICE_TRAY_MOVED, qmp, &err);
Note that the 'goto out_obj' with no intervening code before the
label, as well as the construct of 'err ? NULL : &err', are both
a bit unusual but also temporary; they get fixed in a later patch
that splits visit_end_struct() to drop its errp parameter by moving
some checking before the label. But until that time, this was the
simplest way to avoid the appearance of passing a possibly-set
error to visit_end_struct(), even though actual code inspection
shows that visit_end_struct() for a QMP output visitor will never
set an error.
Backports commit a16e3e5c5825c90887a863513916f93eeec16c55 from qemu
Commit 5cdc8831 reworked gen_params() to be simpler, but forgot
to clean up a now-unused errp named argument.
No change to generated code.
Backports commit e408311546b633b232312450d9017f4db21df0dc from qemu
PEP 8 calls for it, because it's forward compatible with Python 3.
Supported since Python 2.6, which we require (commit fec2103).
Backports commit 291928a80f39670929fcce222acd5e21d1434692 from qemu
It should be fairly obvious that qapi base classes need to
form an acyclic graph, since QMP cannot specify the same
key more than once, while base classes are included as flat
members alongside other members added by the child. But the
old check_member_clash() parser function was not prepared to
check for this, and entered an infinite recursion (at least
until Python gives up, complaining about nesting too deep).
Now that check_member_clash() has been recently removed,
attempts at self-inheritance trigger an assertion failure
introduced by commit ac88219a. The obvious fix is to turn
the assertion into a conditional.
This patch includes both the tests (base-cycle-direct and
base-cycle-indirect) and the fix, since the .err file output
for the unfixed case is not useful (particularly when it was
warning about unbounded recursion, as that limit may be
platform-specific).
We don't need to worry about cycles in flat unions (neither
the base type nor the type of a variant can be a union) nor
in alternates (alternate branches cannot themselves be an
alternate). But if we later allow a union type as a variant,
we will still be okay, as QAPISchemaObjectTypeVariants.check()
triggers the same QAPISchemaObjectType.check() that will
detect any loops.
Likewise, we need not worry about the case of diamond
inheritance where the same class is used for a flat union base
class and one of its variants; either both uses will introduce
a collision in trying to insert the same member name twice, or
the shared type is empty and changes nothing.
Backports commit bac5429ccb4f41d421ec641b11f1852c8420fdb7 from qemu
With the recent commit 'qapi: Detect collisions in C member
names', we have two different locations for detecting clashes -
one at parse time, and another at QAPISchema*.check() time.
Remove all of the ad hoc parser checks, and delete associated
code (for example, the global check_member_clash() method is
no longer needed).
Testing this showed that the test union-bad-branch wasn't adding
much: union-clash-branches also exposes the error message when
branches collide, and we've recently fixed things to avoid an
implicit collision with max. Likewise, the error for
enum-clash-member changes to report our new detection of
upper case in a value name, unless we modify the test to use
all lower case.
The wording of several error messages has changed, but the
change is generally an improvement rather than a regression.
No change to generated code.
Backports commit 01cfbaa4c36ecd9f1c7bcbad50c92758e1d147c4 from qemu
We document that members of enums and objects should be
'lower-case', although we were not enforcing it. We have to
whitelist a few pre-existing entities that violate the norms.
Add three new tests to expose the new error message, each of
which first uses the whitelisted name 'UuidInfo' to prove the
whitelist works, then triggers the failure (this is the same
pattern used in the existing returns-whitelist.json test).
Note that by adding this check, we have effectively forbidden
an entity with a case-insensitive clash of member names, for
any entity that is not on the whitelist (although there is
still the possibility to clash via '-' vs. '_').
Not done here: a future patch should also add naming convention
support and whitelist exceptions for command, event, and type
names.
The additions to QAPISchemaMember.check_clash() check whether
info['name'] is in the whitelist (the top-most entity name at
the point 'info' tracks), rather than self.owner (the type,
possibly implicit, that directly owns the member), because it
is easier to maintain the whitelist by the names actually in
the user's .json file, rather than worrying about the names
of implicit types.
Backports commit 893e1f2c5170d54316f1dcf3fefae679175622fc from qemu
Rather than using just an array of strings, make enum.values be
an array of the new QAPISchemaMember type, and add a helper
member_names() method to get back at the original list of names.
Likewise, creating an enum requires wrapping strings, via a new
QAPISchema._make_enum_members() method. The benefit of wrapping
enum members in a QAPISchemaMember Python object is that we now
share the existing code for C name clash detection (although the
code is not yet active until a later commit removes the earlier
ad hoc parser checks).
In a related change, the QAPISchemaMember._pretty_owner() method
needs to learn about one more implicit type name: the generated
enum associated with a simple union.
In the interest of keeping the changes of this patch local to one
file, the visitor interface still passes just a list of names
rather than the full list of QAPISchemaMember instances. We may
want to revisit this in the future, if the consistency with
visit_object_type() is worth it.
Backports commit 93bda4dd461358b4fc05dfd8e2d6419cdd574789 from qemu
We want to share some clash detection code between enum values
and object type members. To assist with that, split off part
of QAPISchemaObjectTypeMember into a new base class
QAPISchemaMember that tracks name, owner, and common clash
detection code; while the former keeps the additional fields
for type and optional flag.
Backports commit d44f9ac80c43e34b1522cde8829f0ab371f086ca from qemu
For less code, reflect the determined boolean value of an optional
visit back to the caller instead of making the caller read the
boolean after the fact.
The resulting generated code has the following diff:
|- visit_optional(v, &has_fdset_id, "fdset-id");
|- if (has_fdset_id) {
|+ if (visit_optional(v, &has_fdset_id, "fdset-id")) {
| visit_type_int(v, &fdset_id, "fdset-id", &err);
| if (err) {
| goto out;
| }
| }
Backports commit 29637a6ee913df8fcdf371426ee48956b945b618 from qemu
None of the visitor callbacks would set an error when testing
if an optional field was present; make this part of the interface
contract by eliminating the errp argument.
The resulting generated code has a nice diff:
|- visit_optional(v, &has_fdset_id, "fdset-id", &err);
|- if (err) {
|- goto out;
|- }
|+ visit_optional(v, &has_fdset_id, "fdset-id");
| if (has_fdset_id) {
| visit_type_int(v, &fdset_id, "fdset-id", &err);
| if (err) {
| goto out;
| }
| }
Backports commit 5cdc8831a795fb8452d7e34f644202fd724e122a from qemu
The QMP input visitor allows integral values to be assigned by
promotion to a QTYPE_QFLOAT. However, when parsing an alternate,
we did not take this into account, such that an alternate that
accepts 'number' and some other type, but not 'int', would reject
integral values.
With this patch, we now have the following desirable table:
alternate has case selected for
'int' 'number' QTYPE_QINT QTYPE_QFLOAT
no no error error
no yes 'number' 'number'
yes no 'int' error
yes yes 'int' 'number'
While it is unlikely that we will ever use 'number' in an
alternate other than in the testsuite, it never hurts to be
more precise in what we allow.
Backports commit d00341af384665d259af475b14c96bb8414df415 from qemu
Now that alternates no longer use an implicit tag, we can
inline _make_implicit_tag() into its one caller,
_def_union_type().
No change to generated code.
Backports commit 9d3f3494c5b941774e2c3e7639332d53bbe6f8be from qemu
Previously, the generated code in qapi-types.c initialized all
enum lookup tables first, prior to any other definitions. But
there are no topological sorting requirements that mandate this
layout, so we can drop the QAPISchemaGenTypeVisitor._fwdefn
field and just generate all definitions in visitation order.
The generated code shows some churn due to reordering, but it
is still fairly straightforward to follow (all the deletions
occur in one hunk, and all the deleted lines are re-inserted
in the same order later in the same files, just spread across
multiple insertion points).
Backports commit 0b2e84ba774651656771ed697dee8825759dffa9 from qemu
Previously, working with alternates required two lookup arrays
and some indirection: for type Foo, we created Foo_qtypes[]
which maps each qtype to a value of the generated FooKind enum,
then look up that value in FooKind_lookup[] like we do for other
union types.
This has a couple of subtle bugs. First, the generator was
creating a call with a parameter '(int *) &(*obj)->type' where
type is an enum type; this is unsafe if the compiler chooses
to store the enum type in a different size than int, where
assigning through the wrong size pointer can corrupt data or
cause a SIGBUS.
Related bug, not not fixed in this patch: qapi-visit.py's
gen_visit_enum() generates a cast of its enum * argument to
int *. Marked FIXME.
Second, since the values of the FooKind enum start at zero, all
entries of the Foo_qtypes[] array that were not explicitly
initialized will map to the same branch of the union as the
first member of the alternate, rather than triggering a desired
failure in visit_get_next_type(). Fortunately, the bug seldom
bites; the very next thing the input visitor does is try to
parse the incoming JSON with the wrong parser, which normally
fails; the output visitor is not used with a C struct in that
state, and the dealloc visitor has nothing to clean up (so
there is no leak).
However, the second bug IS observable in one case: parsing an
integer causes unusual behavior in an alternate that contains
at least a 'number' member but no 'int' member, because the
'number' parser accepts QTYPE_QINT in addition to the expected
QTYPE_QFLOAT (that is, since 'int' is not a member, the type
QTYPE_QINT accidentally maps to FooKind 0; if this enum value
is the 'number' branch the integer parses successfully, but if
the 'number' branch is not first, some other branch tries to
parse the integer and rejects it). A later patch will worry
about fixing alternates to always parse all inputs that a
non-alternate 'number' would accept, for now this is still
marked FIXME in the updated test-qmp-input-visitor.c, to
merely point out that new undesired behavior of 'ans' matches
the existing undesired behavior of 'asn'.
This patch fixes the default-initialization bug by deleting the
indirection, and modifying get_next_type() to directly assign a
QTypeCode parameter. This in turn fixes the type-casting bug,
as we are no longer casting a pointer to enum to a questionable
size. There is no longer a need to generate an implicit FooKind
enum associated with the alternate type (since the QMP wire
format never uses the stringized counterparts of the C union
member names). Since the updated visit_get_next_type() does not
know which qtypes are expected, the generated visitor is
modified to generate an error statement if an unexpected type is
encountered.
Callers now have to know the QTYPE_* mapping when looking at the
discriminator; but so far, only the testsuite was even using the
C struct of an alternate types. I considered the possibility of
keeping the internal enum FooKind, but initialized differently
than most generated arrays, as in:
typedef enum FooKind {
FOO_KIND_A = QTYPE_QDICT,
FOO_KIND_B = QTYPE_QINT,
} FooKind;
to create nicer aliases for knowing when to use foo->a or foo->b
when inspecting foo->type; but it turned out to add too much
complexity, especially without a client.
There is a user-visible side effect to this change, but I
consider it to be an improvement. Previously,
the invalid QMP command:
{"execute":"blockdev-add", "arguments":{"options":
{"driver":"raw", "id":"a", "file":true}}}
failed with:
{"error": {"class": "GenericError",
"desc": "Invalid parameter type for 'file', expected: QDict"}}
(visit_get_next_type() succeeded, and the error comes from the
visit_type_BlockdevOptions() expecting {}; there is no mention of
the fact that a string would also work). Now it fails with:
{"error": {"class": "GenericError",
"desc": "Invalid parameter type for 'file', expected: BlockdevRef"}}
(the error when the next type doesn't match any expected types for
the overall alternate).
Backports commit 0426d53c6530606bf7641b83f2b755fe61c280ee from qemu
What's more meta than using qapi to define qapi? :)
Convert QType into a full-fledged[*] builtin qapi enum type, so
that a subsequent patch can then use it as the discriminator
type of qapi alternate types. Fortunately, the judicious use of
'prefix' in the qapi definition avoids churn to the spelling of
the enum constants.
To avoid circular definitions, we have to flip the order of
inclusion between "qobject.h" vs. "qapi-types.h". Back in commit
28770e0, we had the latter include the former, so that we could
use 'QObject *' for our implementation of 'any'. But that usage
also works with only a forward declaration, whereas the
definition of QObject requires QType to be a complete type.
[*] The type has to be builtin, rather than declared in
qapi/common.json, because we want to use it for alternates even
when common.json is not included. But since it is the first
builtin enum type, we have to add special cases to qapi-types
and qapi-visit to only emit definitions once, even when two
qapi files are being compiled into the same binary (the way we
already handled builtin list types like 'intList'). We may
need to revisit how multiple qapi files share common types,
but that's a project for another day.
Backports commit 7264f5c50cc1be0f1406e3ebb45aedcca02f603a from qemu
The name QType matches our CODING_STYLE conventions for type names
in CamelCase. It also matches the fact that we are already naming
all the enum members with a prefix of QTYPE, not QTYPE_CODE. And
doing the rename will also make it easier for the next patch to use
QAPI for providing the enum, which also wants CamelCase type names.
Backports commit 1310a3d3bd9301ff5a825287638cfab24c2c6689 from qemu
The QObject hierarchy is small enough, and unlikely to grow further
(since we only use it to map to JSON and already cover all JSON
types), that we can simplify things by not tracking a separate
vtable, but just inline the code element of the vtable QType
directly into QObject (renamed to type), and track a separate array
of destroy functions. We can drop qnull_destroy_obj() in the
process.
The remaining QObject subclasses must export their destructor.
This also has the nice benefit of moving the typename 'QType'
out of the way, so that the next patch can repurpose it for a
nicer name for 'qtype_code'.
The various objects are still the same size (so no change in cache
line pressure), but now have less indirection (although I didn't
bother benchmarking to see if there is a noticeable speedup, as
we don't have hard evidence that this was in a performance hotspot
in the first place).
A future patch could drop the refcnt size to 32 bits for a smaller
struct on 64-bit architectures, if desired (we have limits on the
largest JSON that we are willing to parse, and will probably never
need to take full advantage of a 64-bit refcnt).
Backports commit 55e1819c509b3d9c10a54678b9c585bbda13889e from qemu
I'm going to fix the JSON parser to recognize null. The obvious
representation of JSON null as (QObject *)NULL doesn't work, because
the parser already uses it as an error value. Perhaps we should
change it to free NULL for null, but that's more than I can do right
now. Create a special null QObject instead.
The existing QDict, QList, and QString all represent something that
is a pointer in C and could therefore be associated with NULL. But
right now, all three of these sub-types are always non-null once
created, so the new null sentinel object is intentionally unrelated
to them.
Backports commit 481b002cc81ed7fc7b06e32e9d4d495d81739d14 from qemu
When munging enum values, the fact that we were passing the entire
prefix + value through camel_to_upper() meant that enum values
spelled with CamelCase could be turned into CAMEL_CASE. However,
this provides a potential collision (both OneTwo and One-Two would
munge into ONE_TWO) for enum types, when the same two names are
valid side-by-side as QAPI member names. By changing the generation
of enum constants to always be prefix + '_' + c_name(value,
False).upper(), and ensuring that there are no case collisions (in
the next patches), we no longer have to worry about names that
would be distinct as QAPI members but collide as variant tag names,
without having to think about what munging the heuristics in
camel_to_upper() will actually perform on an enum value.
Making the change will affect enums that did not follow coding
conventions, using 'CamelCase' rather than desired 'lower-case'.
Thankfully, there are only two culprits: InputButton and ErrorClass.
We already tweaked ErrorClass to make it an alias of QapiErrorClass,
where only the alias needs changing rather than the whole tree. So
the bulk of this change is modifying INPUT_BUTTON_WHEEL_UP to the
new INPUT_BUTTON_WHEELUP (and likewise for WHEELDOWN). That part
of this commit may later need reverting if we rename the enum
constants from 'WheelUp' to 'wheel-up' as part of moving
x-input-send-event to a stable interface; but at least we have
documentation bread crumbs in place to remind us (commit 513e7cd),
and it matches the fact that SDL constants are also spelled
SDL_BUTTON_WHEELUP.
Backports commit d20a580bc0eac9d489884f6d2ed28105880532b6 from qemu
The qapi enum ErrorClass is unusual that it uses 'CamelCase' names,
contrary to our documented convention of preferring 'lower-case'.
However, this enum is entrenched in the API; we cannot change
what strings QMP outputs. Meanwhile, we want to simplify how
c_enum_const() is used to generate enum constants, by moving away
from the heuristics of camel_to_upper() to a more straightforward
c_name(N).upper() - but doing so will rename all of the ErrorClass
constants and cause churn to all client files, where the new names
are aesthetically less pleasing (ERROR_CLASS_DEVICENOTFOUND looks
like we can't make up our minds on whether to break between words).
So as always in computer science, solve the problem by some more
indirection: rename the qapi type to QapiErrorClass, and add a
new enum ErrorClass in error.h whose members are aliases of the
qapi type, but with the spelling expected elsewhere in the tree.
Then, when c_enum_const() changes the munging, we only have to
adjust the one alias spot.
Backports commit f22a28b898322c01b0463a8b7ec551d72bc61a5b from qemu
Now that we no longer collide with an implicit _MAX enum member,
we no longer need to reject it in the ad hoc parser, and can
remove several tests that are no longer needed.
Backports commit 04e0639d4e77b6d55491d396c8aa13929ee8ed9a from qemu
Now that we guarantee the user doesn't have any enum values
beginning with a single underscore, we can use that for our
own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious
that the sentinel is generated.
This patch was mostly generated by applying a temporary patch:
|diff --git a/scripts/qapi.py b/scripts/qapi.py
|index e6d014b..b862ec9 100644
|--- a/scripts/qapi.py
|+++ b/scripts/qapi.py
|@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = {
| max_index = c_enum_const(name, 'MAX', prefix)
| ret += mcgen('''
| [%(max_index)s] = NULL,
|+// %(max_index)s
| };
| ''',
| max_index=max_index)
then running:
$ cat qapi-{types,event}.c tests/test-qapi-types.c |
sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list
$ git grep -l _MAX | xargs sed -i -f list
The only things not generated are the changes in scripts/qapi.py.
Rejecting enum members named 'MAX' is now useless, and will be dropped
in the next patch.
Backports commit 7fb1cf1606c78c9d5b538f29176fd5a101726a9d from qemu
We already documented that qapi names should match specific
patterns (such as starting with a letter unless it was an enum
value or a downstream extension). Tighten that from a suggestion
into a hard requirement, which frees up names beginning with a
single underscore for qapi internal usage.
The tighter regex doesn't forbid everything insane that a user
could provide (for example, a user could name a type 'Foo-lookup'
to collide with the generated 'Foo_lookup[]' for an enum 'Foo'),
but does a good job at protecting the most obvious uses, and
also happens to reserve single leading underscore for later use.
The handling of enum values starting with a digit is tricky:
commit 9fb081e introduced a subtle bug by using c_name() on
a munged value, which would allow an enum to include the
member 'q-int' in spite of our reservation. Furthermore,
munging with a leading '_' would fail our tighter regex. So
fix it by only munging for leading digits (which are never
ticklish in c_name()) and by using a different prefix (I
picked 'D', although any letter should do).
Add new tests, reserved-member-underscore and reserved-enum-q,
to demonstrate the tighter checking.
Backports commit 59a92feedc6927e0e1ff87fdaccfb4dd42ad4c84 from qemu
Commit cbc95538 removed unused start_handle() and end_handle(),
but forgot to remove their declarations.
Backports commit 7549457200ec3871ee827765f4d3bbc8d903b2ec from qemu
The method c_name() is supposed to do two different actions: munge
'-' into '_', and add a 'q_' prefix to ticklish names. But it did
these steps out of order, making it possible to submit input that
is not ticklish until after munging, where the output then lacked
the desired prefix.
The failure is exposed easily if you have a compiler that recognizes
C11 keywords, and try to name a member '_Thread-local', as it would
result in trying to compile the declaration 'uint64_t _Thread_local;'
which is not valid. However, this name violates our conventions
(ultimately, want to enforce that no qapi names start with single
underscore), so the test is slightly weaker by instead testing
'wchar-t'; the declaration 'uint64_t wchar_t;' is valid in C (where
wchar_t is only a typedef) but would fail with a C++ compiler (where
it is a keyword).
Fix things by reversing the order of actions within c_name().
Backports commit c43567c12042cf401b039bfc94a5f85e1cc1e796 from qemu
Detect attempts to declare two object members that would result
in the same C member name, by keying the 'seen' dictionary off
of the C name rather than the qapi name. It also requires passing
info through the check_clash() methods.
This addresses a TODO and fixes the previously-broken
args-name-clash test. The resulting error message demonstrates
the utility of the .describe() method added previously. No change
to generated code.
Backports commit 27b60ab93bd1d5d8c85f009aac7a97ffd2c53c86 from qemu
Future commits will migrate semantic checking away from parsing
and over to the various QAPISchema*.check() methods. But to
report an error message about an incorrect semantic use of a
member of an object type, it helps to know which type, command,
or event owns the member. In particular, when a member is
inherited from a base type, it is desirable to associate the
member name with the base type (and not the type calling
member.check()).
Rather than packing additional information into the seen array
passed to each member.check() (as in seen[m.name] = {'member':m,
'owner':type}), it is easier to have each member track the name
of the owner type in the first place (keeping things simpler
with the existing seen[m.name] = m). The new member.owner field
is set via a new set_owner() method, called when registering
the members and variants arrays with an object or variant type.
Track only a name, and not the actual type object, to avoid
creating a circular python reference chain.
Note that Variants.set_owner() method does not set the owner
for the tag_member field; this field is set earlier either as
part of an object's non-variant members, or explicitly by
alternates.
The source information is intended for human consumption in
error messages, and a new describe() method is added to access
the resulting information. For example, given the qapi:
{ 'command': 'foo', 'data': { 'string': 'str' } }
an implementation of visit_command() that calls
arg_type.members[0].describe()
will see "'string' (parameter of foo)".
To make the human-readable name of implicit types work without
duplicating efforts, the describe() method has to reverse the
name of implicit types, via the helper _pretty_owner().
No change to generated code.
Backports commit 88d4ef8b5cbf9d3336564b1d3ac7a91cbe4aee0e from qemu
Checking that a given QAPISchemaObjectTypeVariant.name is a
member of the corresponding QAPISchemaEnumType of the owning
QAPISchemaObjectTypeVariants.tag_member ensures that there are
no collisions in the generated C union for those tag values
(since the enum itself should have no collisions).
However, ever since its introduction in f51d8c3d, this was the
only additional action of of Variant.check(), beyond calling
the superclass Member.check(). This forces a difference in
.check() signatures, just to pass the enum type down.
Simplify things by instead doing the tag name check as part of
Variants.check(), at which point we can rely on inheritance
instead of overriding Variant.check().
Backports commit 10565ca92a8d3f8a34559329acfbdb25a791b594 from qemu
Consolidate two common sequences of clash detection into a
new QAPISchemaObjectType.check_clash() helper method.
No change to generated code.
Backports commit c2183d2e62b6d9d66f80bc0bcf4fc7ec3c5d76d4 from qemu
Right now, our ad hoc parser ensures that we cannot have a
flat union that introduces any members that would clash with
non-variant members inherited from the union's base type (see
flat-union-clash-member.json). We want QAPISchemaObjectType.check()
to make the same check, so we can later reduce some of the ad
hoc checks.
We already have a map 'seen' of all non-variant members. We
still need to check for collisions between each variant type's
members and the non-variant ones.
To know the variant type's members, we need to call
variant.type.check(). This also detects when a type contains
itself in a variant, exactly like the existing base.check()
detects when a type contains itself as a base. (Except that
we currently forbid anything but a struct as the type of a
variant, so we can't actually trigger this type of loop yet.)
Slight complication: an alternate's variant can have arbitrary
type, but only an object type's check() may be called outside
QAPISchema.check(). We could either skip the call for variants
of alternates, or skip it for non-object types. For now, do
the latter, because it's easier.
Then we call each variant member's check_clash() with the
appropriate 'seen' map. Since members of different variants
can't clash, we have to clone a fresh seen for each variant.
Wrap this in a new helper method
QAPISchemaObjectTypeVariants.check_clash().
Note that cloning 'seen' inside .check_clash() resembles
the one we just removed from .check() in 'qapi: Drop
obsolete tag value collision assertions'; the difference here is
that we are now checking for clashes among the qapi members of
the variant type, rather than for a single clash with the variant
tag name itself.
Note that, by construction, collisions can't actually happen for
simple unions: each variant's type is a wrapper with a single
member 'data', which will never collide with the only non-variant
member 'type'.
For alternates, there's nothing for a variant object type's
members to clash with, and therefore no need to call the new
variants.check_clash().
No change to generated code.
Backports commit b807a1e1e3796adaf3ece2f7b69ea5ee28468ff4 from qemu
Reduce the ugly flat union / simple union conditional by doing just
the essential work here, namely setting self.tag_member.
Move the rest to callers.
Backports commit 14ff84619c6bb9b729dbf8b127c1e4c56ed8c500 from qemu
While there, stick in a TODO change key of seen from QAPI name to C
name. Can't do it right away, because it would fail the assertion for
tests/qapi-schema/args-has-clash.json.
Backports commit 577de12d22aba55f31fd68c5724411eb8592a4ca from qemu
This hunk
@@ -964,6 +965,7 @@ class QAPISchemaObjectType(QAPISchemaType):
members = []
seen = {}
for m in members:
+ assert c_name(m.name) not in seen
seen[m.name] = m
for m in self.local_members:
m.check(schema, members, seen)
is plainly broken.
Asserting the members inherited from base don't clash is somewhat
redundant, because self.base.check() just checked that. But it
doesn't hurt.
The idea to use c_name(m.name) instead of m.name for collision
checking is sound, because we need to catch clashes between the m.name
and between the c_name(m.name), and when two m.name clash, then their
c_name() also clash.
However, using c_name(m.name) instead of m.name in one of several
places doesn't work. See the very next line.
Keep the assertion, but drop the c_name() for now. A future commit
will bring it back.
Backports commit 08683353fc46b5d462199c9e8cff6f6c67f20f65 from qemu
QAPISchemaObjectTypeVariants.check() parameter members and
QAPISchemaObjectTypeVariant.check() parameter seen are no longer used,
drop them.
Backports commit cdc5fa37eda2896d2b08f9215c963256eb859d3b from qemu
QAPISchemaObjectTypeMember.check() currently does four things:
1. Compute self.type
2. Accumulate members in all_members
Only one caller cares: QAPISchemaObjectType.check() uses it to
compute self.members. The other callers pass a throw-away
accumulator.
3. Accumulate a map from names to members in seen
Only one caller cares: QAPISchemaObjectType.check() uses it to
compute its local variable seen, for self.variants.check(), which
uses it to compute self.variants.tag_member from
self.variants.tag_name. The other callers pass a throw-away
accumulator.
4. Check for collisions
This piggybacks on 3: before adding a new entry, we assert it's new.
Only one caller cares: QAPISchemaObjectType.check() uses it to
assert non-variant members don't clash.
Simplify QAPISchemaObjectType.check(): move 2.-4. to
QAPISchemaObjectType.check(), and drop parameters all_members and
seen.
Backports commit e564e2dd5963a75f32bbb90ac8181ba9dca2f1aa from qemu
Union tag values can't clash with member names in generated C anymore
since commit e4ba22b, but QAPISchemaObjectTypeVariants.check() still
asserts they don't. Drop it.
Backports commit fff5f231d5f96e8521761efcd35a12479594059a from qemu
Simplify gen_struct_fields() back to a single iteration over a
list of fields (like it was prior to commit f87ab7f9), by moving
the generated comments to gen_object(). Then, inline
gen_struct_field() into its only caller.
Backports commit 7d9586f900a9043025866f84c096b1842b0bbbf6 from qemu
These two methods are now close enough that we can finally merge
them, relying on the fact that simple unions now provide a
reasonable local_members. Change gen_struct() to gen_object()
that handles all forms of QAPISchemaObjectType, and rename and
shrink gen_union() to gen_variants() to handle the portion of
gen_object() needed when variants are present.
gen_struct_fields() now has a single caller, so it no longer
needs an optional parameter; however, I did not choose to inline
it into the caller.
No difference to generated code.
Backports commit 570cd8d1194cf68f7c9948971e52e47f20855a77 from qemu
We were previously creating all unions with an empty list for
local_members. However, it will make it easier to unify struct
and union generation if we include the generated tag member in
local_members. That way, we can have a common code pattern:
visit the base (if any), visit the local members (if any), visit
the variants (if any). The local_members of a flat union
remains empty (because the discriminator is already visited as
part of the base). Then, by visiting tag_member.check() during
AlternateType.check(), we no longer need to call it during
Variants.check().
The various front end entities now exist as follows:
struct: optional base, optional local_members, no variants
simple union: no base, one-element local_members, variants with tag_member
from local_members
flat union: base, no local_members, variants with tag_member from base
alternate: no base, no local_members, variants
With the new local members, we require a bit of finesse to
avoid assertions in the clients.
No change to generated code.
Backports commit da34a9bd999d1be13954c699bbae0295cdaa3200 from qemu
Our generated list visitors have the same problem as has been
mentioned elsewhere (see commit 2f52e20): they allocate data
even on failure. An upcoming patch will correct things to
provide saner guarantees, but first we need to expose the
behavior in the testsuite to ensure we aren't introducing any
memory usage bugs.
There are more test cases throughout the test-qmp-input-* tests
that already deal with partial allocation; a later commit will
clean up all visit_type_FOO(), without marking all of the tests
with FIXME at this time.
Backports commit dd5ee2c2d3e3a17647ddd9bfa97935b8cb5dfa40 from qemu
Rather than having all callers pass a name, type, and optional
flag, have them instead pass a QAPISchemaObjectTypeMember which
already has all that information.
No change to generated code.
Backports commit 32bc6879beea0b0cac6196cb15a71d206401e96d from qemu
Now that we have separated union tag values from colliding with
non-variant C names, by naming the union 'u', we should reserve
this name for our use. Note that we want to forbid 'u' even in
a struct with no variants, because it is possible for a future
qemu release to extend QMP in a backwards-compatible manner while
converting from a struct to a flat union. Fortunately, no
existing clients were using this member name. If we ever find
the need for QMP to have a member 'u', we could at that time
relax things, perhaps by having c_name() munge the QMP member to
'q_u'.
Note that we cannot forbid 'u' everywhere (by adding the
rejection code to check_name()), because the existing QKeyCode
enum already uses it; therefore we only reserve it as a struct
type member name.
Backports commit 5e59baf90a72cd25d38a3134edc029f4f022da74 from qemu
We have two issues with our qapi union layout:
1) Even though the QMP wire format spells the tag 'type', the
C code spells it 'kind', requiring some hacks in the generator.
2) The C struct uses an anonymous union, which places all tag
values in the same namespace as all non-variant members. This
leads to spurious collisions if a tag value matches a non-variant
member's name.
This patch is the back end for a series that converts to a
saner qapi union layout. Now that all clients have been
converted to use 'type' and 'obj->u.value', we can drop the
temporary parallel support for 'kind' and 'obj->value'.
Given a simple union qapi type:
{ 'union':'Foo', 'data': { 'a':'int', 'b':'bool' } }
this is the overall effect, when compared to the state before
this series of patches:
| struct Foo {
|- FooKind kind;
|- union { /* union tag is @kind */
|+ FooKind type;
|+ union { /* union tag is @type */
| void *data;
| int64_t a;
| bool b;
|- };
|+ } u;
| };
The testsuite still contains some examples of artificial restrictions
(see flat-union-clash-type.json, for example) that are no longer
technically necessary, now that there is no longer a collision between
enum tag values and non-variant member names; but fixing this will be
done in later patches, in part because some further changes are required
to keep QAPISchema*.check() from asserting. Also, a later patch will
add a reservation for the member name 'u' to avoid a collision between a
user's non-variant names and our internal choice of C union name.
Note, however, that we do not rename the generated enum, which
is still 'FooKind'. A further patch could generate implicit
enums as 'FooType', but while the generator already reserved
the '*Kind' namespace (commit 4dc2e69), there are already QMP
constructs with '*Type' naming, which means changing our
reservation namespace would have lots of churn to C code to
deal with a forced name change.
Backports commit e4ba22b31943ab02373359555bd7bcd66442632f from qemu
We have two issues with our qapi union layout:
1) Even though the QMP wire format spells the tag 'type', the
C code spells it 'kind', requiring some hacks in the generator.
2) The C struct uses an anonymous union, which places all tag
values in the same namespace as all non-variant members. This
leads to spurious collisions if a tag value matches a non-variant
member's name.
Make the conversion to the new layout for qapi-visit.py.
Generated code changes look like:
|@@ -4912,16 +4912,16 @@ void visit_type_MemoryDeviceInfo(Visitor
| if (!*obj) {
| goto out_obj;
| }
|- visit_type_MemoryDeviceInfoKind(v, &(*obj)->kind, "type", &err);
|+ visit_type_MemoryDeviceInfoKind(v, &(*obj)->type, "type", &err);
| if (err) {
| goto out_obj;
| }
|- if (!visit_start_union(v, !!(*obj)->data, &err) || err) {
|+ if (!visit_start_union(v, !!(*obj)->u.data, &err) || err) {
| goto out_obj;
| }
|- switch ((*obj)->kind) {
|+ switch ((*obj)->type) {
| case MEMORY_DEVICE_INFO_KIND_DIMM:
|- visit_type_PCDIMMDeviceInfo(v, &(*obj)->dimm, "data", &err);
|+ visit_type_PCDIMMDeviceInfo(v, &(*obj)->u.dimm, "data", &err);
| break;
| default:
| abort();
|@@ -4930,7 +4930,7 @@ out_obj:
| error_propagate(errp, err);
| err = NULL;
| if (*obj) {
|- visit_end_union(v, !!(*obj)->data, &err);
|+ visit_end_union(v, !!(*obj)->u.data, &err);
| }
| error_propagate(errp, err);
| err = NULL;
Backports commit 150d0564a4c626642897c748f7906260a13c14e1 from qemu
We have two issues with our qapi union layout:
1) Even though the QMP wire format spells the tag 'type', the
C code spells it 'kind', requiring some hacks in the generator.
2) The C struct uses an anonymous union, which places all tag
values in the same namespace as all non-variant members. This
leads to spurious collisions if a tag value matches a non-variant
member's name.
This patch is the front end for a series that converts to a
saner qapi union layout. By the end of the series, we will no
longer have the type/kind mismatch, and all tag values will be
under a named union, which requires clients to access
'obj->u.value' instead of 'obj->value'. But since the
conversion touches a number of files, it is easiest if we
temporarily support BOTH layouts simultaneously.
Given a simple union qapi type:
{ 'union':'Foo', 'data': { 'a':'int', 'b':'bool' } }
make the following changes in generated qapi-types.h:
| struct Foo {
|- FooKind kind;
|- union { /* union tag is @kind */
|+ union {
|+ FooKind kind;
|+ FooKind type;
|+ };
|+ union { /* union tag is @type */
| void *data;
| int64_t a;
| bool b;
|+ union { /* union tag is @type */
|+ void *data;
|+ int64_t a;
|+ bool b;
|+ } u;
| };
| };
Flat unions do not need the anonymous union for the tag member,
as we already fixed that to use the member name instead of 'kind'
back in commit 0f61af3e.
One additional change is needed in qapi.py: check_union() now
needs to check for collisions with 'type' in addition to those
with 'kind'.
Later, when the conversions are complete, we will remove the
duplication hacks, and also drop the check_union() restrictions.
Note, however, that we do not rename the generated enum, which
is still 'FooKind'. A further patch could generate implicit
enums as 'FooType', but while the generator already reserved
the '*Kind' namespace (commit 4dc2e69), there are already QMP
constructs with '*Type' naming, which means changing our
reservation namespace would have lots of churn to C code to
deal with a forced name change.
Backports commit f51d8fab44b231aa299d8de24cfdf9ba41ef4a21 from qemu
The code for visiting the base class of a child struct created
visit_type_Base_fields() which covers all fields of Base; while
the code for visiting the base class of a flat union created
visit_type_Union_fields() covering all fields of the base
except the discriminator. But since the base class includes
the discriminator of a flat union, we can just visit the entire
base, without needing a separate visit of the discriminator.
Not only is consistently visiting all fields easier to
understand, it lets us share code.
The generated code in qapi-visit.c loses several now-unused
visit_type_UNION_fields(), along with changes like:
|@@ -1654,11 +1557,7 @@ void visit_type_BlockdevOptions(Visitor
| if (!*obj) {
| goto out_obj;
| }
|- visit_type_BlockdevOptions_fields(v, obj, &err);
|- if (err) {
|- goto out_obj;
|- }
|- visit_type_BlockdevDriver(v, &(*obj)->driver, "driver", &err);
|+ visit_type_BlockdevOptionsBase_fields(v, (BlockdevOptionsBase **)obj, &err);
| if (err) {
| goto out_obj;
| }
and forward declarations where needed. Note that the cast of obj
to BASE ** is necessary to call visit_type_BASE_fields() (and we
can't use our upcast wrappers, because those work on pointers while
we have a pointer-to-pointer).
Backports commit 5c5e51a05b567fd48fb155d94ca6f7679dd0d478 from qemu
Rather than storing a base class as a pointer to a box, just
store the fields of that base class in the same order, so that
a child struct can be directly cast to its parent. This gives
less malloc overhead, less pointer dereferencing, and even less
generated code. Compare to the earlier commit 1e6c1616a "qapi:
Generate a nicer struct for flat unions" (although that patch
had fewer places to change, as less of qemu was directly using
qapi structs for flat unions). It also allows us to turn on
automatic type-safe wrappers for upcasting to the base class
of a struct.
Changes to the generated code look like this in qapi-types.h:
| struct SpiceChannel {
|- SpiceBasicInfo *base;
|+ /* Members inherited from SpiceBasicInfo: */
|+ char *host;
|+ char *port;
|+ NetworkAddressFamily family;
|+ /* Own members: */
| int64_t connection_id;
as well as additional upcast functions like qapi_SpiceChannel_base().
Meanwhile, changes to qapi-visit.c look like:
| static void visit_type_SpiceChannel_fields(Visitor *v, SpiceChannel **obj, Error **errp)
| {
| Error *err = NULL;
|
|- visit_type_implicit_SpiceBasicInfo(v, &(*obj)->base, &err);
|+ visit_type_SpiceBasicInfo_fields(v, (SpiceBasicInfo **)obj, &err);
| if (err) {
(the cast is necessary, since our upcast wrappers only deal with a
single pointer, not pointer-to-pointer); plus the wholesale
elimination of some now-unused visit_type_implicit_FOO() functions.
Without boxing, the corner case of one empty struct having
another empty struct as its base type now requires inserting a
dummy member (previously, the 'Base *base' member sufficed).
And now that we no longer consume a 'base' member in the generated
C struct, we can delete the former negative struct-base-clash-base
test.
Backports commit ddf21908961073199f3d186204da4810f2ea150b from qemu
A previous patch (commit 1e6c1616) made it possible to
directly cast from a qapi flat union type to its base type.
However, it requires the use of a C cast, which turns off
compiler type-safety checks. Fortunately, no such casts
exist, just yet.
Regardless, add inline type-safe wrappers named
qapi_FOO_base() for any union type FOO that has a base,
which can be used for a safer upcast, and enhance the
testsuite to cover the new functionality.
A future patch will extend the upcast support to structs,
where such conversions do exist already.
Note that C makes const-correct upcasts annoying because
it lacks overloads; these functions cast away const so that
they can accept user pointers whether const or not, and the
result in turn can be assigned to normal or const pointers.
Alternatively, this could have been done with macros, but
type-safe macros are hairy, and not worthwhile here.
This patch just adds upcasts. None of our code needed to
downcast from a base qapi class to a child. Also, in the
case of grandchildren (such as BlockdevOptionsQcow2), the
caller will need to call two functions to get to the inner
base (although it wouldn't be too hard to generate a
qapi_FOO_base_base() if desired). If a user changes qapi
to alter the base class hierarchy, such as going from
'A -> C' to 'A -> B -> C', it will change the type of
'qapi_C_base()', and the compiler will point out the places
that are affected by the new base.
One alternative was proposed, but was deemed too ugly to use
in practice: the generators could output redundant
information using anonymous types:
| struct Child {
| union {
| struct {
| Type1 parent_member1;
| Type2 parent_member2;
| };
| Parent base;
| };
| };
With that ugly proposal, for a given qapi type, obj->member
and obj->base.member would refer to the same storage; allowing
convenience in working with members without needing 'base.'
allowing typesafe upcast without needing a C cast by accessing
'&obj->base', and allowing downcasts from the parent back to
the child possible through container_of(obj, Child, base).
Backports commit 30594fe1cd4355626e73b80645428105d0df3cf6 from qemu
Move code from gen_union() into gen_struct_fields() in order for
a later patch to share code when enumerating inherited fields
for struct types.
No change to generated code.
Backports commit f87ab7f9bd956250c48b5c6e9b607b537fd21543 from qemu
We generate a static visit_type_FOO_fields() for every type
FOO. However, sometimes we need a forward declaration. Split
the code to generate the forward declaration out of
gen_visit_implicit_struct() into a new gen_visit_fields_decl(),
and also prepare for a forward declaration to be emitted
during gen_visit_struct(), so that a future patch can switch
from using visit_type_FOO_implicit() to the simpler
visit_type_FOO_fields() as part of unboxing the base class
of a struct.
No change to generated code.
Backports commit d02cf37766ba3cf918d7085aa7848c9dc05fd11a from qemu
c_name() produces names starting with 'q_' when protecting a
dictionary member name that would fail to directly compile, but
in doing so can cause clashes with any member name already
beginning with 'q-' or 'q_'. Likewise, we create a C name 'has_'
for any optional member that can clash with any member name
beginning with 'has-' or 'has_'.
Technically, rather than blindly reserving the namespace,
we could try to complain about user names only when an actual
collision occurs, or even teach c_name() how to munge names
to avoid collisions. But it is not trivial, especially when
collisions can occur across multiple types (such as via
inheritance or flat unions). Besides, no existing .json
files are trying to use these names. So it's easier to just
outright forbid the potential for collision. We can always
relax things in the future if a real need arises for QMP to
express member names that have been forbidden here.
'has_' only has to be reserved for struct/union member names,
while 'q_' is reserved everywhere (matching the fact that
only members can be optional, while we use c_name() for munging
both members and entities). Note that we could relax 'q_'
restrictions on entities independently from member names; for
example, c_name('qmp_' + 'unix') would result in a different
function name than our current 'qmp_' + c_name('unix').
Update and add tests to cover the new error messages.
Backports commit 9fb081e0b98409556d023c7193eeb68947cd1211 from qemu
Type names ending in 'List' can clash with qapi list types in
generated C. We don't currently use such names. It is easier to
outlaw them now than to worry about how to resolve such a clash
in the future. For precedence, see commit 4dc2e69, which did the
same for names ending in 'Kind' versus implicit enum types for
qapi unions.
Update the testsuite to match.
Backports commit 255960dd374d4497d6ea537305f1b0d8a3433789 from qemu
We were using regular expressions to see if ret included
any earlier text that emitted a 'goto out;' line, to decide
whether we needed to output an 'out:' label. But this is
fragile, if the ret text can possibly combine more than one
generated function body, where the first function used a
goto but the second does not. Change the code to just check
for the known conditions which cause an error check to be
needed. Besides, it's slightly more efficient to use plain
checks than regular expression searching.
No change to generated code.
Backports commit f9e6102b48f21e464a847a858a456c521e7a83e5 from qemu
Rather than slicing the end of a string, we can use python's
endswith(). And rather than creating a set of characters,
we can search for a character within a string.
Backports commit 8712fa5333ad348da20034b717dd814219d1ec11 from qemu
A future patch will move some error checking from the parser
to the various QAPISchema*.check() methods, which run only
after parsing completes. It will thus be possible to create
a python instance representing an implicit QAPI type that
parses fine but will fail validation during check(). Since
all errors have to have an associated 'info' location, we
need a location to be associated with those implicit types.
The intuitive info to use is the location of the enclosing
entity that caused the creation of the implicit type.
Note that we do not anticipate builtin types being used in
an error message (as they are not part of the user's QAPI
input, the user can't cause a semantic error in their
behavior), so we exempt those types from requiring info, by
setting a flag to track the completion of _def_predefineds(),
and tracking that flag in _def_entity().
No change to the generated code.
Backports commit 99df5289d8c7ebf373c3570d8fba3f3a73360281 from qemu
For simple unions, we were creating the implicit 'type' tag
member during the QAPISchemaObjectTypeVariants constructor.
This is different from every other implicit QAPISchemaEntity
object, which get created by QAPISchema methods. Hoist the
creation to the caller (renaming _make_tag_enum() to
_make_implicit_tag()), and pass the entity rather than the
string name, so that we have the nice property that no
entities are created as a side effect within a different
entity. A later patch will then have an easier time of
associating location info with each entity creation.
No change to generated code.
Backports commit 46292ba75c515baf733df18644052b2ce9492728 from qemu
Commit ac88219a had several TODO markers about whether we needed
to automatically create the corresponding array type alongside
any other type. It turns out that most of the time, we don't!
There are a few exceptions: 1) We have a few situations where we
use an array type in internal code but do not expose that type
through QMP; fix it by declaring a dummy type that forces the
generator to see that we want to use the array type.
2) The builtin arrays (such as intList for QAPI ['int']) must
always be generated, because of the way our QAPI_TYPES_BUILTIN
compile guard works: we have situations (at the very least
tests/test-qmp-output-visitor.c) that include both top-level
"qapi-types.h" (via "error.h") and a secondary
"test-qapi-types.h". If we were to only emit the builtin types
when used locally, then the first .h file would not include all
types, but the second .h does not declare anything at all because
the first .h set QAPI_TYPES_BUILTIN, and we would end up with
compilation error due to things like unknown type 'int8List'.
Actually, we may need to revisit how we do type guards, and
change from a single QAPI_TYPES_BUILTIN over to a different
usage pattern that does one #ifdef per qapi type - right now,
the only types that are declared multiple times between two qapi
.json files for inclusion by a single .c file happen to be the
builtin arrays. But now that we have QAPI 'include' statements,
it is logical to assume that we will soon reach a point where
we want to reuse non-builtin types (yes, I'm thinking about what
it will take to add introspection to QGA, where we will want to
reuse the SchemaInfo type and friends). One #ifdef per type
will help ensure that generating the same qapi type into more
than one qapi-types.h won't cause collisions when both are
included in the same .c file; but we also have to solve how to
avoid creating duplicate qapi-types.c entry points. So that
is a problem left for another day.
Generated code for qapi-types and qapi-visit is drastically
reduced; less than a third of the arrays that were blindly
created were actually needed (a quick grep shows we dropped
from 219 to 69 *List types), and the .o files lost more than
30% of their bulk. [For best results, diff the generated
files with 'git diff --patience --no-index pre post'.]
Interestingly, the introspection output is unchanged - this is
because we already cull all types that are not indirectly
reachable from a command or event, so introspection was already
using only a subset of array types. The subset of types
introspected is now a much larger percentage of the overall set
of array types emitted in qapi-types.h (since the larger set
shrunk), but still not 100% (evidence that the array types
emitted for our new Dummy structs, and the new struct itself,
don't affect QMP).
Backports commit 9f08c8ec73878122ad4b061ed334f0437afaaa32 from qemu
