Misbehaving clients that shall not be named here may call
GameWindow.Close() inside the GameWindow.Closing event. This causes
recursion in SDL2, crashing the application.
This patch adds a guard to protect against recursion when calling
GameWindow.Close().
Instead of modifying the name of an OpenGL symbol on the managed side,
before copying it to the unmanaged side, we perform the modification
directly on the unmanaged side. This reduces the total amount of
allocations in OpenTK by ~30% (673496 bytes in 10750 objects compared
to 930272 bytes in 15243 objects before this modification.)
It is now possible to indicate that an application is not DPI-aware. In
that case, OpenTK will let the operating system handle DPI scaling. This
results in worse visuals (pixel doubling) but allows non DPI-aware
applications to continue working.
WGL was autogenerated a few years ago but never touched after that.
Since we use a tiny fraction of all available methods, it makes sense to
remove the unused ones. This reduces dll size and improves startup
times.
On Windows, entry points for OpenGL 1.0 and 1.1 are not exposed by
wglGetProcAddress. We fall back to LoadLibrary+GetProcAddress when
wglProcAddress fails.
OpenTK normally uses reflection to load bindings, instead of generating
huge constructors. Although reflection is faster on first load (thanks
to reduced JIT overhead), it fails to work correctly with monolinker.
This branch explores the performance of a direct binding.
When we enter the modal resize loop on Windows with ClipCursor set, we
cause a feedback loop where every resize causes the cursor to move and
every move causes a new resize. To fix this, we need to ungrab the
cursor when we are enter the modal loop.
SDL_DestroyWindow must be called on the main thread. If the window is
finalized, the finalizer will push a CLOSE event to the event loop
(thread-safe) and the window will be destroyed on the main thread.
Sdl2InputDriver.Dispose() would call SDL_DelEventWatch with a different
"user_data" parameter than SDL_AdEventWatch. This caused the EventFilter
to remain registered and subsequently crash when closing and reopening a
window.
OpenTK.Toolkit will now initialize OpenTK.Configuration and
OpenTK.Platform.Factory explicitly. It can also receive an optional
ToolkitOptions parameter to influence the OpenTK.Platform implementation
that will be chosen. Finally, it explicitly implements IDisposable to
clean up after itself.
It is now possible to pass a non-realized GraphicsMode to the X11GLContext and X11GLNative constructors. A non-realized GraphicsMode is a GraphicsMode with a null Index (i.e. which has not passed through SelectGraphicsMode()).
According to the Linux OpenGL ABI, glXGetProcAddressARB must be statically exported by libGL. This does *not* hold true for glXGetProcAddress. We must used the ARB version instead.
Furthermore, glx entry points, unlike wgl, do not depend on any specific OpenGL context. This means we can load them in the constructor of the Glx class.
WinGraphicsMode no longer creates a temporary context in order to create
the list of available modes. Instead, it requires to be passed an
existing context in its constructor.
WinGLContext now creates one temporary context in its static constructor
and hands that to WinGraphicsMode.
WinFactory no longer supports the CreateGraphicsMode API. This API will
be removed in the future, because the link because contexts and modes
cannot be separated in the general case.
glXGetProcAddress may return a non-null value even if a function is not
supported by the server. We need to check the extension string using
any GLX extensions. Fixes issue http://www.opentk.com/node/3111 "GLX
extension support is not checked correctly".
Furthermore, mode selection is now performed explicitly by the
X11GLContext constructor.
GLX entry points are not bound to a specific context. This means that, unlike WGL, GLX does not require a temporary context in order to load its entry points!
The IGraphicsMode interface is gradually being removed and the
MacOSFactory will now throw an exception if an instance is requested.
AglContext no longer duplicates MacOSGraphicsMode functionality.
Calling SDL_GL_GetAttribute when context construction has failed leads
to erroneous behavior. This call should only be made when a context has
been constructed correctly.
SDL_GL_GetCurrentContext will allow us to replace the weird
implementation in Sdl2Factory.CreateGetCurrentGraphicsContext()
and the latter to disable mouse emulation if we wish to.
Conflicts:
Source/OpenTK/Platform/SDL2/Sdl2.cs
WinGraphicsMode no longer creates a temporary context in order to create
the list of available modes. Instead, it requires to be passed an
existing context in its constructor.
WinGLContext now creates one temporary context in its static constructor
and hands that to WinGraphicsMode.
WinFactory no longer supports the CreateGraphicsMode API. This API will
be removed in the future, because the link because contexts and modes
cannot be separated in the general case.
ContextAttribute.DOUBLEBUFFER is a boolean in SDL (false->single
buffering, true->double buffering). We need to adjust the number of
buffers accordingly (single buffering->1 buffer, double buffering->2
buffers).
The issue is that some display devices report a BitsPerPel value of 0.
It is not clear whether this is a bug in WinDisplayDevice.cs or some
strange windows issue. The implemented workaround adds an entry to the
debug log and hardcodes BitsPerPel to 32 whenever this condition is
encountered. More investigation required.
uint-to-intptr conversion must obey uint-to-int conversions on 32-bit
machines, otherwise an OverflowException may occur: conversions of
numbers over 2^31-1 must be declared as unchecked.
Fixes issue reported here: http://www.opentk.com/node/3418
SDL_GL_GetDrawableSize was introduced after 2.0.0, so we need to check for that version before we call this method. Fixes MethodNotFounException on vanilla libsdl2-2.0.0 on linux.
When HiDPI is enabled, the size of the OpenGL surface (specified in
pixels) may no longer correspond to the size of the window (specified
in points). Width, Height, ClientSize and ClientRectangle return the
size of the OpenGL surface in device-dependent pixel coordinates
(origin: top-left pixel of the surface). Bounds and Size return the
size of the window in device-independent point coordinates (origin:
desktop).
This significantly improves the usability of keyboard input, by allowing
a common input scheme to be used on different keyboard layouts. Text
input will be facilitated through a new API.
The support burden for Windows versions prior to XP was too large, plus
the relevant code was completely untested. Removing that will allow us
to focus on the things that really matter.
Some drivers / operating systems export ES entry points as extensions on regular "desktop" GraphicsContexts. Attempt to load them even if the user has not explicitly asked for an ES context.
If SDL2 is supported, the PlatformFactory will now use it for creating the OpenGL ES context. Previously, it would revert to the native drivers when GraphicsContextFlag.Embedded was specified.
MouseMove no longer leaves the window borders when the cursor is
invisible. MouseButtonUp events are now reported even when they occur
outside the window. This aligns SDL2 behavior with the native drivers.
SDL_GL_MakeCurrent(IntPtr.Zero, IntPtr.Zero) is the correct way to
remove the current OpenGL context from the calling thread. Fixes
threaded rendering on Windows.
Git commit hashcodes are not compatible with the 16bit integer values found in .Net version numbers. Use the git commit count as a version number instead.
Added IDisposable interface to all classes holding native data that must be freed. OpenTK.Toolkit.Init() now returns an IDisposable instance that can be used to cleanup all native data held by OpenTK. This is useful when re-initializing OpenTK (possibly in a new AppDomain), as is the case in the Example browser.
On some systems, the Windows Raw Input driver fails to find the name of
a mouse device, causing a NRE. Since the name is not vital information,
a dummy name is generated as a workaround.
SDL2 does not report keydown and keyup events on modifiers keys until
you release them. Attempted to fix this using SDL_GetModifierState, but
this does not appear to work. Should hit upstream.
This resolves the issue where different layouts would return different
keys when pressing the same physical key. A new API must be introduced
for text input.
The SDL surface is no longer needed and will cause a memory leak if not
freed. Additionally, the decoded BitmapData should not be unlocked until
after updating the window icon, as it may be moved by the GC otherwise.
SDL2 suffers many of the issues we encountered when implementing
OpenTK.Platform.Windows. Workarounds are now in place to make
WindowState changes behave reasonably.
Wgl is implemented using the regular DllImport + delegate approach, in
order to support extensions. The delegates have not been armed at this
point, so we need to use the DllImport directly.
The whole wgl API should be revisited (we are using only a tiny
portion.)
This is a new platform that can be used then sdl2 is installed on the target system. SDL2 is commercially supported by Valve and provides better support for MacOS compared to our current implementation (Cocoa vs Carbon). It will also help us introduce faster support for new platforms. Existing platforms remain as a fallback and will be automatically used if sdl2 is not installed.
Please note that this is still a work in progress. The new mouse and keyboard API is not supported yet. Due to limitations of sdl2, multiple mice/keyboards are also not supported.
The platform factory for windows now calls SetProcessDPIAware
in order to enable support for high-dpi modes. The relevant
DllImport has been added to API.cs
* EglContext.cs:
* EglGraphicsMode.cs: Added a parameter to indicate which ES renderer
version we wish to use. Fixes issue [#2247]: "CreateEGLGraphicsMode
should select the correct renderer".
* Input/IMouseDriver2.cs:
* Platform/X11/X11Mouse.cs:
* Platform/X11/XI2Mouse.cs:
* Platform/X11/Functions.cs:
* Platform/Windows/WMInput.cs:
* Platform/X11/X11GLNative.cs:
* Platform/Windows/WinRawMouse.cs: Added ability to set the position
of the mouse cursor.
[X11] Avoid grabbing the pointer, as this causes unexpected
side-effects (XInput2 stops working, debugging becomes difficult).
We now use XWarpPointer and try to discard the spurious MouseMove
events it generates.
[X11] Make cursor visible when window loses focus, to make debugging
easier. Restore previous state when it regains focus.
Added aggressive locking during context creation and delegate loading in order to avoid potential race conditions.
Now uses Wgl.Imports directly wherever possible in order to improve performance and avoid race conditions.
Slightly improved debugging messages.
* X11Factory.cs: Use new X11Keyboard interface.
Temporarily disabled XI2Mouse for testing.
* Functions.cs: Fixed type declaration for Time.
Added support for XIGrabDevice, XIUngrabDevice, XGrabKey, XUngrabKey,
XAllowEvents and XKeycodeToKeysym/XKeysymToKeycode.
* API.cs: Enumerate modes for XAllowEvents.
