Use bits from configuration registers for availability control
of MT ASE instructions, rather than only ISA_MT bit in insn_flags.
This is done by adding a field in hflags for MT bit, and adding
functions check_mt() and check_cp0_mt().
Backports commit 9affc1c59279f482ff145e0371926f79b6448e3e from qemu
Implement support for nanoMIPS LLWP/SCWP instructions. Beside
adding core functionality of these instructions, this patch adds
support for availability control via configuration bit XNP.
Backports commit 0b16dcd180bdbe3add9edea42c2374d427882661 from qemu
Add CP0_Config3 and CP0_Config5 to DisasContext structure. This is
needed for implementing availability control of various instructions.
Backports commit ab77fc611bf004dfd25ecad5b2c11261e32012e9 from qemu
Implement emulation of nanoMIPS EXTW instruction. EXTW instruction
is similar to the MIPS r6 ALIGN instruction, except that it counts
the other way and in bits instead of bytes. We therefore generalise
gen_align() function into a new gen_align_bits() function (which
counts in bits instead of bytes and optimises when bits = size of
the word), and implement gen_align() and a new gen_ext() based on
that. Since we need to know the word size to check for when the
number of bits == the word size, the opc argument is replaced with
a wordsz argument (either 32 or 64).
Backports commit 821f2008c3c708e0e33158039ab55673a0f04519 from qemu
Added a helper for ROTX based on the pseudocode from the
architecture spec. This instraction was not present in previous
MIPS instruction sets.
Backports commit e222f5067269392af489731221750976d0cf3c05 from qemu
Add emulation of nanoMIPS instructions situated in pool p_lsx, and
emulation of LSA instruction as well.
Backports commit eac5266459fb83e70fbf33f95c7c846f89df5c6a from qemu
Add emulation of SAVE16 and RESTORE.JRC16 instructions. Routines
gen_save(), gen_restore(), and gen_adjust_sp() are provided to support
this feature.
This patch at the same time provides function gen_op_addr_addi(). This
function will be used in emulation of some other nanoMIPS instructions.
Backports commit bf0718c59a4b27dd01346a7b5b9a183ed1b18fb7 from qemu
Add empty body and invocation of decode_nanomips_opc() if the bit
ISA_NANOMIPS32 is set in ctx->insn_flags.
Backports commit c533c0f4741be62501ef6c7f6ce77ffbfc2e4964 from qemu
Only if Config3.ISA is 3 (microMIPS), the mode should be switched in
cpu_state_reset(). Config3.ISA is 1 for nanoMIPS processors, and no mode
change should happen.
Backports commit 0bbc0396809f6caaaf96863dafe738e94f9b73ea from qemu
Add nanoMIPS opcodes. nanoMIPS instruction are organized by so-called
instruction pools. Each pool contains a set of opcodes, that in turn
can be instruction opcodes or instruction pool opcodes.
Backports commit 261c95a0e98e5e9b13c9c005a991b7e7dc27f38a from qemu
Following the bulk conversion of the iwMMXt code, there are
just a handful of hard coded tabs in target/arm; fix them.
This is a whitespace-only patch.
Backports commit 6e0fafe2ef02378c696e7cf84ef41511e3b3b81a from qemu
Untabify the arm iwmmxt_helper.c. This affects only the iwMMXt code.
We've never touched that code in years, so it's not going to get
fixed up by our "change when touched" process, and a bulk change is
not going to be too disruptive.
This commit was produced using Emacs "untabify" (plus one
by-hand removal of a space to fix a checkpatch nit); it is
a whitespace-only change.
Backports commit 67aed15551f9814712d5ac25a155919b34fbd627 from qemu
On 32-bit exception entry, CPSR.J must always be set to 0
(see v7A Arm ARM DDI0406C.c B1.8.5). CPSR.IL must also
be cleared on 32-bit exception entry (see v8A Arm ARM
DDI0487C.a G1.10).
Clear these bits. (This fixes a bug which will never be noticed
by non-buggy guests.)
Backports commit 829f9fd394ab082753308cbda165c13eaf8fae49 from qemu
Factor out the code which changes the CPU state so as to
actually take an exception to AArch32. We're going to want
to use this for handling exception entry to Hyp mode.
Backports commit dea8378bb3e86f2c6bd05afb3927619f7c51bb47 from qemu
The AArch32 HCR and HCR2 registers alias HCR_EL2
bits [31:0] and [63:32]; implement them.
Since HCR2 exists in ARMv8 but not ARMv7, we need new
regdef arrays for "we have EL3, not EL2, we're ARMv8"
and "we have EL2, we're ARMv8" to hold the definitions.
Backports commit ce4afed8396aabaf87cd42fbe8a4c14f7a9d5c10 from qemu
The v8 AArch32 HACTLR2 register maps to bits [63:32] of ACTLR_EL2.
We implement ACTLR_EL2 as RAZ/WI, so make HACTLR2 also RAZ/WI.
(We put the regdef next to ACTLR_EL2 as a reminder in case we
ever make ACTLR_EL2 something other than RAZ/WI).
Backports commit 0e0456ab8895a5e85998904549e331d36c2692a5 from qemu
The current implementation has three bugs,
* segment limits are not enforced in protected mode if the L bit is set
in the target segment descriptor
* segment limits are not enforced in compatibility mode (ljmp to 32-bit
code segment in long mode)
* #GP(new_cs) is generated rather than #GP(0)
Now the segment limits are enforced if we're not in long mode OR the
target code segment doesn't have the L bit set.
Backports commit db7196db5d5d932f388643baae6835f8dcda6921 from qemu
Currently call gates are always treated as 32-bit gates. In IA-32e mode
(either compatibility or 64-bit submode), system segment descriptors are
always 64-bit. Treating them as 32-bit has the expected unfortunate
effect: only the lower 32 bits of the offset are loaded, the stack
pointer is truncated, a bad new stack pointer is loaded from the TSS (if
switching privilege levels), etc.
This change adds support for 64-bit call gate to the lcall and ljmp
instructions. Additionally, there should be a check for non-canonical
stack pointers, but I've omitted that since there doesn't seem to be
checks for non-canonical addresses in this code elsewhere.
I've left the raise_exception_err_ra lines unwapped at 80 columns to
match the style in the rest of the file.
Backports commit 0aca060526d3ff9632aaed66e8611814580c13de from qemu
ARMv7VE introduced the ERET instruction, which is necessary to
return from an exception taken to Hyp mode. Implement this.
In A32 encoding it is a completely new encoding; in T32 it
is an adjustment of the behaviour of the existing
"SUBS PC, LR, #<imm8>" instruction.
Backports commit 55c544ed2709bd202e71e77ddfe3ea0327852211 from qemu
The MSR (banked) and MRS (banked) instructions allow accesses to ELR_Hyp
from either Monitor or Hyp mode. Our translate time check
was overly strict and only permitted access from Monitor mode.
The runtime check we do in msr_mrs_banked_exc_checks() had the
correct code in it, but never got there because of the earlier
"currmode == tgtmode" check. Special case ELR_Hyp.
Backports commit aec4dd09f172ee64c19222b78269d5952fd9c1dc from qemu
The AArch32 HSR is the equivalent of AArch64 ESR_EL2;
we can implement it by marking our existing ESR_EL2 regdef
as STATE_BOTH. It also needs to be "RES0 from EL3 if
EL2 not implemented", so add the missing stanza to
el3_no_el2_cp_reginfo.
Backports commit 68e78e332cb1c3f8b0317a0443acb2b5e190f0dd from qemu
The AArch32 virtualization extensions support these fault address
registers:
* HDFAR: aliased with AArch64 FAR_EL2[31:0] and AArch32 DFAR(S)
* HIFAR: aliased with AArch64 FAR_EL2[63:32] and AArch32 IFAR(S)
Implement the accessors for these. This fixes in passing a bug
where we weren't implementing the "RES0 from EL3 if EL2 not
implemented" behaviour for AArch64 FAR_EL2.
Backports commit cba517c31e7df8932c4473c477a0f01d8a0adc48 from qemu
Implement the AArch32 HVBAR register; we can do this just by
making the existing VBAR_EL2 regdefs be STATE_BOTH.
Backports commit d79e0c0608899428281a17c414ccf1a82d86ab85 from qemu
ARMCPRegInfo structs will default to .cp = 15 if they
are ARM_CP_STATE_BOTH, but not if they are ARM_CP_STATE_AA32
(because a coprocessor number of 0 is valid for AArch32).
We forgot to explicitly set .cp = 15 for the HMAIR1 and
HAMAIR1 regdefs, which meant they would UNDEF when the guest
tried to access them under cp15.
Backports commit b5ede85bfb7ba1a8f6086494c82f400b29969f65 from qemu
We implement the HAMAIR1 register as RAZ/WI; we had a typo in the
regdef, though, and were incorrectly naming it HMAIR1 (which is
a different register which we also implement as RAZ/WI).
Backports commit 55b53c718b2f684793eeefcf1c1a548ee97e23aa from qemu
If an instruction is conditional (like CBZ) and it is executed
conditionally (using the ITx instruction), a jump to an undefined
label is generated, and QEMU crashes.
CBZ in IT block is an UNPREDICTABLE behavior, but we should not
crash. Honouring the condition code is allowed by the spec in this
case (constrained unpredictable, ARMv8, section K1.1.7), and matches
what we do for other "UNPREDICTABLE inside an IT block" instructions.
Fix the 'skip on condition' code to create a new label only if it
does not already exist. Previously multiple labels were created, but
only the last one of them was set.
Backports commit c2d9644e6d517170bf6520f633628259a8460d48 from qemu
Enabling TOPOEXT is always allowed, but it can't be enabled
blindly by "-cpu host" because it may make guests crash if the
rest of the cache topology information isn't provided or isn't
consistent.
This addresses the bug reported at:
https://bugzilla.redhat.com/show_bug.cgi?id=1613277
Backports commit 7210a02c58572b2686a3a8d610c6628f87864aed from qemu
New CPU models mostly inherit features from ancestor Skylake, while addin new
features: UMIP, New Instructions ( PCONIFIG (server only), WBNOINVD,
AVX512_VBMI2, GFNI, AVX512_VNNI, VPCLMULQDQ, VAES, AVX512_BITALG),
Intel PT and 5-level paging (Server only). As well as
IA32_PRED_CMD, SSBD support for speculative execution
side channel mitigations.
Note:
For 5-level paging, Guest physical address width can be configured, with
parameter "phys-bits". Unless explicitly specified, we still use its default
value, even for Icelake-Server cpu model.
At present, hold on expose IA32_ARCH_CAPABILITIES to guest, as 1) This MSR
actually presents more than 1 'feature', maintainers are considering expanding current
features presentation of only CPUIDs to MSR bits; 2) a reasonable default value
for MSR_IA32_ARCH_CAPABILITIES needs to settled first. These 2 are actully
beyond Icelake CPU model itself but fundamental. So split these work apart
and do it later.
https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg00774.htmlhttps://lists.gnu.org/archive/html/qemu-devel/2018-07/msg00796.html
Backports commit 8a11c62da9146dd89aee98947e6bd831e65a970d from qemu
WBNOINVD: Write back and do not invalidate cache, enumerated by
CPUID.(EAX=80000008H, ECX=0):EBX[bit 9].
Backports commit 59a80a19ca31a6fff9fdbb6b4cf55a5a0767c3bc from qemu
Support of IA32_PRED_CMD MSR already be enumerated by same CPUID bit as
SPEC_CTRL.
At present, mark CPUID_7_0_EDX_ARCH_CAPABILITIES unmigratable, per Paolo's
comment.
Backports commit 3fc7c73139d2d38ae80c3b0bc963b1ac1555924c from qemu
IA32_PRED_CMD MSR gives software a way to issue commands that affect the state
of indirect branch predictors. Enumerated by CPUID.(EAX=7H,ECX=0):EDX[26].
IA32_ARCH_CAPABILITIES MSR enumerates architectural features of RDCL_NO and
IBRS_ALL. Enumerated by CPUID.(EAX=07H, ECX=0):EDX[29].
https://software.intel.com/sites/default/files/managed/c5/63/336996-Speculative-Execution-Side-Channel-Mitigations.pdf
Backports commit 8c80c99fcceabd0708a5a83f08577e778c9419f5 from qemu
MFHC0 and MTHC0 used to handle EntryLo0 and EntryLo1 registers only,
and placing ELPA flag checks before switch statement were technically
correct. However, after adding handling more registers, these checks
should be moved to act only in cases of handling EntryLo0 and
EntryLo1.
Backports commit 59488dda1f16c0259bc2610d8d71686ef436c649 from qemu
Update CP0 registers Config0, Config1, Config2, Config3,
Config4, and Config5 bit definitions.
Some of these bits will be utilized by upcoming nanoMIPS changes.
Backports commit 0413d7a55a8161ebd33541ba1df4285bf180c583 from qemu
Fix two instances of shadow variables. This cleans up entire file
translate.c from shadow variables.
Backports commit e1555d7ddf2c86fb92165e47eb092f1f5fa9e8bd from qemu
Mark switch fallthroughs with comments, in cases fallthroughs
are intentional.
The comments "/* fall through */" are interpreted by compilers and
other tools, and they will not issue warnings in such cases. For gcc,
the warning is turnend on by -Wimplicit-fallthrough. With this patch,
there will be no such warnings in target/mips directory. If such
warning appears in future, it should be checked if it is intentional,
and, if yes, marked with a comment similar to those from this patch.
The comment must be just before next "case", otherwise gcc won't
understand it.
Backports commit 146dd620db815558938433eb9f57a571d424d2c6 from qemu
Remove "range style" case statements to make code analysis easier.
This patch handles cases when the values in the range in question
were not properly defined.
Backports commit c38a1d52233c85976eeed99c9015e881de8cd68e from qemu
Remove "range style" case statements to make code analysis easier.
This is needed also for some upcoming nanoMIPS-related refactorings.
Backports commit c2e19f3c2b1a1bb5f4fc3c55ee8cfa28dde9b810 from qemu
These insns require u=1; failed to include that in the switch
cases. This probably happened during one of the rebases just
before final commit.
Fixes: d17b7cdcf4e
Backports commit b8a4a96db3639e17ab5e5cdc14fca4b19fbf5b3b from qemu
We were using the wrong flush-to-zero bit for the non-half input.
Fixes: 46d33d1e3c9
Backports commit e4ab5124a5c2e2291006b24bdc21c3dd8d087ff4 from qemu
When FZ is set, input_denormal exceptions are recognized, but this does
not happen with FZ16. The softfloat code has no way to distinguish
these bits and will raise such exceptions into fp_status_f16.flags,
so ignore them when computing the accumulated flags.
Backports commit 19062c169e5bcdda3d60df9161228e107bf0f96e from qemu
When support for FZ16 was added, we failed to include the bit
within FPCR_MASK, which means that it could never be set.
Continue to zero FZ16 when ARMv8.2-FP16 is not enabled.
Fixes: d81ce0ef2c4
Backports commit 0b62159be33d45d00dfa34a317c6d3da30ffb480 from qemu
Define a "cortex-m0" ARMv6-M CPU model.
Most of the register reset values set by other CPU models are not
relevant for the cut-down ARMv6-M architecture.
Backports commit 191776b96a381b5d2b8d3f90c1c02b3e4779e5f7 from qemu
This allows the default (and maximum) vector length to be set
from the command-line. Which is extraordinarily helpful in
debugging problems depending on vector length without having to
bake knowledge of PR_SET_SVE_VL into every guest binary.
Backports relevant parts of commit
adf92eab90e3f5f34c285da6d14d48952b7a8e72 from qemu
Also fold the FPCR/FPSR state onto the same line as PSTATE,
and mention but do not dump disabled FPU state.
Backports commit 2bf5f3f91bb4e3faa2a19aec042138a938afbf6a from qemu
The scaling should be solely on the memory operation size; the number
of registers being loaded does not come in to the initial computation.
Backports commit 50ef1cbf31caad21019ae6fa8036ed6f29244ba5 from qemu
The immediate should be scaled by the size of the memory reference,
not the size of the elements into which it is loaded.
Backports commit d0e372b0298f897993f831dbff7ad4f1c70f138e from qemu
The expression (int) imm + (uint32_t) len_align turns into uint32_t
and thus with negative imm produces a memory operation at the wrong
offset. None of the numbers involved are particularly large, so
change everything to use int.
Backports commit 19f2acc915a0f8f443a959844540a6f09133cc96 from qemu
The pseudocode for this operation is an increment + compare loop,
so comparing <= the maximum integer produces an all-true predicate.
Rather than bound in both the inline code and the helper, pass the
helper the number of predicate bits to set instead of the number
of predicate elements to set.
Backports commit bbd0968c458d48e34a08b8694fa3309a9fe1c9e7 from qemu
The normal vector element is sign-extended before
comparing with the wide vector element.
Backports commit df4e001093988544d09887122ae824f18ba55c68 from qemu
Tailchaining is an optimization in handling of exception return
for M-profile cores: if we are about to pop the exception stack
for an exception return, but there is a pending exception which
is higher priority than the priority we are returning to, then
instead of unstacking and then immediately taking the exception
and stacking registers again, we can chain to the pending
exception without unstacking and stacking.
For v6M and v7M it is IMPDEF whether tailchaining happens for pending
exceptions; for v8M this is architecturally required. Implement it
in QEMU for all M-profile cores, since in practice v6M and v7M
hardware implementations generally do have it.
(We were already doing tailchaining for derived exceptions which
happened during exception return, like the validity checks and
stack access failures; these have always been required to be
tailchained for all versions of the architecture.)
Backports commit 5f62d3b9e67bfc3deb970e3c7fb7df7e57d46fc3 from qemu
On exception return for M-profile, we must restore the CONTROL.SPSEL
bit from the EXCRET value before we do any kind of tailchaining,
including for the derived exceptions on integrity check failures.
Otherwise we will give the guest an incorrect EXCRET.SPSEL value on
exception entry for the tailchained exception.
Backports commit 89b1fec193b81b6ad0bd2975f2fa179980cc722e from qemu
In do_v7m_exception_exit(), we use the exc_secure variable to track
whether the exception we're returning from is secure or non-secure.
Unfortunately the statement initializing this was accidentally
inside an "if (env->v7m.exception != ARMV7M_EXCP_NMI)" conditional,
which meant that we were using the wrong value for NMI handlers.
Move the initialization out to the right place.
Backports commit b8109608bc6f3337298d44ac4369bf0bc8c3a1e4 from qemu
One of the required effects of setting HCR_EL2.TGE is that when
SCR_EL3.NS is 1 then SCTLR_EL1.M must behave as if it is zero for
all purposes except direct reads. That is, it effectively disables
the MMU for the NS EL0/EL1 translation regime.
Backports commit 3d0e3080d8b7abcddc038d18e8401861c369c4c1 from qemu
The IMO, FMO and AMO bits in HCR_EL2 are defined to "behave as
1 for all purposes other than direct reads" if HCR_EL2.TGE
is set and HCR_EL2.E2H is 0, and to "behave as 0 for all
purposes other than direct reads" if HCR_EL2.TGE is set
and HRC_EL2.E2H is 1.
To avoid having to check E2H and TGE everywhere where we test IMO and
FMO, provide accessors arm_hcr_el2_imo(), arm_hcr_el2_fmo()and
arm_hcr_el2_amo(). We don't implement ARMv8.1-VHE yet, so the E2H
case will never be true, but we include the logic to save effort when
we eventually do get to that.
(Note that in several of these callsites the change doesn't
actually make a difference as either the callsite is handling
TGE specially anyway, or the CPU can't get into that situation
with TGE set; we change everywhere for consistency.)
Backports commit ac656b166b57332ee397e9781810c956f4f5fde5 from qemu
Whene we raise a synchronous exception, if HCR_EL2.TGE is set then
exceptions targeting NS EL1 must be redirected to EL2. Implement
this in raise_exception() -- all synchronous exceptions go through
this function.
(Asynchronous exceptions go via arm_cpu_exec_interrupt(), which
already honours HCR_EL2.TGE when it determines the target EL
in arm_phys_excp_target_el().)
Backports commit 7556edfb4d7bf0583c852c8cfc49ef494c41dd8a from qemu
Some debug registers can be trapped via MDCR_EL2 bits TDRA, TDOSA,
and TDA, which we implement in the functions access_tdra(),
access_tdosa() and access_tda(). If MDCR_EL2.TDE or HCR_EL2.TGE
are 1, the TDRA, TDOSA and TDA bits should behave as if they were 1.
Implement this by having the access functions check MDCR_EL2.TDE
and HCR_EL2.TGE.
Backports commit 30ac6339dca3fe0d05a611f12eedd5af20af585a from qemu
If the "trap general exceptions" bit HCR_EL2.TGE is set, we
must mask all virtual interrupts (as per DDI0487C.a D1.14.3).
Implement this in arm_excp_unmasked().
Backports commit 2ccf0fef632f3d54b2cc9ea08f1e6904ff1f8df4 from qemu
Forbid stack alignment change. (CCR)
Reserve FAULTMASK, BASEPRI registers.
Report any fault as a HardFault. Disable MemManage, BusFault and
UsageFault, so they always escalated to HardFault. (SHCSR)
Backports commit 22ab3460017cfcfb6b50f05838ad142e08becce5 from qemu
MSR_SMI_COUNT started being migrated in QEMU 2.12. Do not migrate it
on older machine types, or the subsection causes a load failure for
guests that use SMM.
Backports part of commit 990e0be2603511560168e1ad61f68294d951c39e from
qemu
Rename DCACHE to DATA_CACHE and ICACHE to INSTRUCTION_CACHE.
This avoids conflict with Linux asm/cachectl.h macros and fixes
build failure on mips hosts.
Backports commit 5f00335aecafc9ad56592d943619d3252f8941f1 from qemu
To correctly handle small (less than TARGET_PAGE_SIZE) MPU regions,
we must correctly handle the case where the address being looked
up hits in an MPU region that is not small but the address is
in the same page as a small region. For instance if MPU region
1 covers an entire page from 0x2000 to 0x2400 and MPU region
2 is small and covers only 0x2200 to 0x2280, then for an access
to 0x2000 we must not return a result covering the full page
even though we hit the page-sized region 1. Otherwise we will
then cache that result in the TLB and accesses that should
hit region 2 will incorrectly find the region 1 information.
Check for the case where we miss an MPU region but it is still
within the same page, and in that case narrow the size we will
pass to tlb_set_page_with_attrs() for whatever the final
outcome is of the MPU lookup.
Backports commit 9d2b5a58f85be2d8e129c4b53d6708ecf8796e54 from qemu
'I' was being double-incremented; correctly within the inner loop
and incorrectly within the outer loop.
Backports commit 628fc75f3a3bb115de3b445c1a18547c44613cfe from qemu
For M-profile exception returns, the mmu index to use for exception
return unstacking is supposed to be that of wherever we are returning to:
* if returning to handler mode, privileged
* if returning to thread mode, privileged or unprivileged depending on
CONTROL.nPRIV for the destination security state
We were passing the wrong thing as the 'priv' argument to
arm_v7m_mmu_idx_for_secstate_and_priv(). The effect was that guests
which programmed the MPU to behave differently for privileged and
unprivileged code could get spurious MemManage Unstack exceptions.
Backports commit 2b83714d4ea659899069a4b94aa2dfadc847a013 from qemu
Use MAKE_64BIT_MASK instead of open-coding. Remove an odd
vector size check that is unlikely to be more profitable
than 3 64-bit integer stores. Correct the iteration for WORD
to avoid writing too much data.
Fixes RISU tests of PTRUE for VL 256.
Backports commit 973558a3f869e591d2406dd8226ec0c4e32a3c3e from qemu
These instructions must perform the sve_access_check, but
since they are implemented as NOPs there is no generated
code to elide when the access check fails.
Backports commit 2f95a3b09aebdcb5c9152a7ac434a5d57441fe82 from qemu
This implements NPT suport for SVM by hooking into
x86_cpu_handle_mmu_fault where it reads the stage-1 page table. Whether
we need to perform this 2nd stage translation, and how, is decided
during vmrun and stored in hflags2, along with nested_cr3 and
nested_pg_mode.
As get_hphys performs a direct cpu_vmexit in case of NPT faults, we need
retaddr in that function. To avoid changing the signature of
cpu_handle_mmu_fault, this passes the value from tlb_fill to get_hphys
via the CPU state.
This was tested successfully via the Jailhouse hypervisor.
Backports commit fe441054bb3f0c75ff23335790342c0408e11c3a from qemu
There is no need to re-set these 3 features already
implied by the call to aarch64_a15_initfn.
Backports commit 0b33968e7f4cf998f678b2d1a5be3d6f3f3513d8 from qemu
There is no need to re-set these 9 features already
implied by the call to aarch64_a57_initfn.
Backports commit 156a7065365578deb3d63c2b5b69a4b5999a8fcc from qemu
Leave ARM_CP_SVE, removing ARM_CP_FPU; the sve_access_check
produced by the flag already includes fp_access_check. If
we also check ARM_CP_FPU the double fp_access_check asserts.
Backports commit 11d7870b1b4d038d7beb827f3afa72e284701351 from qemu
We already check for the same condition within the normal integer
sdiv and sdiv64 helpers. Use a slightly different formation that
does not require deducing the expression type.
Backports commit 7e8fafbfd0537937ba8fb366a90ea6548cc31576 from qemu
Since kernel commit a86bd139f2 (arm64: arch_timer: Enable CNTVCT_EL0
trap..), released in kernel version v4.12, user-space has been able
to read these system registers. As we can't use QEMUTimer's in
linux-user mode we just directly call cpu_get_clock().
Backports commit 26c4a83bd4707797868174332a540f7d61288d15 from qemu
We've already added the helpers with an SVE patch, all that remains
is to wire up the aa64 and aa32 translators. Enable the feature
within -cpu max for CONFIG_USER_ONLY.
Backports commit 26c470a7bb4233454137de1062341ad48947f252 from qemu
Enhance the existing helpers to support SVE, which takes the
index from each 128-bit segment. The change has no effect
for AdvSIMD, since there is only one such segment.
Backports commit 18fc24057815bf3d956cfab892a2bc2344bd1dcb from qemu
For aa64 advsimd, we had been passing the pre-indexed vector.
However, sve applies the index to each 128-bit segment, so we
need to pass in the index separately.
For aa32 advsimd, the fp32 operation always has index 0, but
we failed to interpret the fp16 index correctly.
Backports commit 2cc99919a81a62589a4a6b0f365eabfead1db1a7 from qemu
It calls cpu_loop_exit in system emulation mode (and should never be
called in user emulation mode).
Backports commit 50b3de6e5cd464dcc20e3a48f5a09e0299a184ac from qemu
We need to terminate the translation block after STGI so that pending
interrupts can be injected.
This fixes pending NMI injection for Jailhouse which uses "stgi; clgi"
to open a brief injection window.
Backports commit df2518aa587a0157bbfbc635fe47295629d9914a from qemu
Check for SVM interception prior to injecting an NMI. Tested via the
Jailhouse hypervisor.
Backports commit 02f7fd25a446a220905c2e5cb0fc3655d7f63b29 from qemu
